MailboxExportRequest ContentFilter is "Received -ne $null" when querying by date.

I am trying to export a mailbox to a PST. All email that was received before
yesterday is what I am trying to export.
$y = ((get-date).addDays(-1)).ToShortDateString()$exportRequest = New-MailboxExportRequest -ContentFilter {(Received -lt $y)} -mailbox userID -FilePath\\SHARED\folder\userID.pst
Something is not right here. I end up exporting the entire mailbox.
When I run a:
Get-MailboxExportRequest | Get-MailboxExportRequestStatistics | select ContentFilter
It says that my content filter is:
Received -ne $null
I am sure something is wrong with my syntax here, but I can't seem to get it.

Hi Johnny,
Please checkout this MS-Library to find the correct syntax for exporting mailbox to PST:
http://technet.microsoft.com/en-us/library/ff607299(v=exchg.150).aspx
Another good resource you can explore at here(http://www.exchangemailboxtopst.org/) which will make your task more easier while need to export mailboxes to PST.

Similar Messages

Receiving OCI/ORA-27163 when querying XML data in 11g.

When querying a table with a column stored in XML format, we get this error for large XML values. This works in Oracle 10g but this error happens when the same data is queried in an 11.2.0.3 instance. I have had a support request open with Oracle for about a month and so far it has not made any progress. What we've seen are the following:
1. The xml data itself is good.
2. The good xml data when queried with a wholly 10g client/server environment, works.
3. The same good xml data when inserted into a table in an 11g instance through a stored package run from the 11g instance (server to server) gets the 27163 error.
4. The same xml data when queried in a 10g instance from an 11g client fails with the 27163 error.
5. If we disable the 11g XML parser by setting an internal event (alter session set events='31156 trace name context forever, level 0x400';), then run the same code that was run in item 3 above, it does not get the 27163 error. However, the xml loaded to the 11g instance can then only be queried without getting the 27163 error if we use an older 10g client. An 11g client consistently gets the error.
The server versions are 11.2.0.3 (upgraded from 10.2.0.4). The SQL*Net client versions that we have tested on are 11.2.0.2 and 11.2.0.3 (both produce the 27163 error).
With considerable trial and error, we found that it is some combination of the file size and format that causes the error. Copied below is the smallest sample data of a failing XML that will produce this erro (about 8K). Remove any single character even in an a comment and the file parses successfully – but it’s not the file size alone as the original 800+KB file where we first dicovered this problem will process if the period in the attribute: @value=”${item.id}” is removed.
We are at our wit's end, and with an 11g migration project looming, any ideas anyone can suggest would be very helpful.
Thanks,
Joe
Here is a test case to play around with. Sorry I don't have a way to upload a zip file for this, but you can cut & paste from the post:
1. CREATE TABLE my_xml_test
(record_id NUMBER(4,0),
xml SYS.XMLTYPE,
comments VARCHAR2(200))
ALTER TABLE my_xml_test
ADD CONSTRAINT my_xml_test_pk PRIMARY KEY (record_id)
USING INDEX
2. mkdir SampleData
3. cd into SampleData, copy the XML I will post in the first reply to this message into a new text document called xml_items_removed.xml.
4. cd .. and create a file called 20120112_11g_bad_xml_issue.txt with this in it:
1, .\SampleData\xml_items_removed.xml,"Fails: OriginalXML w/ all instances of <Item> removed (count 600) -- reduces file size to ca. 55KB but still fails (Saved by XMLSpy)"
5. Next create your SQL*Loader control file (call it my_xml_test.ctl):
LOAD DATA
APPEND INTO TABLE my_xml_test
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
record_id,
ext_fname FILLER CHAR(200),
xml LOBFILE(ext_fname) TERMINATED BY EOF,
comments
6. sqlldr <username>/<password>@<database> control=my_xml_test.ctl data=20120112_11g_bad_xml_issue.txt log=20120112_11g_bad_xml_issue.log bad=20120112_11g_bad_xml_issue.bad
7. Once the data is loaded, query my_xml_test table that you created in step 1. You should get the 27163 error:
SELECT a.record_id,
comments,
a.XML,
length(a.XML.GetClobVal()) clob_length
FROM my_xml_test a

<?xml version="1.0" encoding="UTF-8"?>

<IRData application="Item Review" version="1.3" itempool="2006001" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <ViewerTypes>
          <Viewer id="its-viewer">
               <Title>Item Text</Title>
               <Description>Item Text</Description>
               <BaseUrl>https://www.starttest.com/flex/4.3.0.0/InstitutionViewItem.aspx</BaseUrl>
               <Parameters>
                    <Parameter name="pid" value="MSST"/>
                    <Parameter name="iid" value="01123"/>
                    <Parameter name="username" value="SomeUser"/>
                    <Parameter name="item" value="${item.id}"/>
                    <Parameter name="code" value="${CODE}"/>
               </Parameters>
          </Viewer>
     </ViewerTypes>
     <Filters>
          <Filter id="drop-single-filter">
               <AttributeSource>drop</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="onoff-single-filter">
               <AttributeSource>onoff</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="reviewed-single-filter">
               <AttributeSource>reviewed</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="build-multi-filter">
               <AttributeSource>build</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="flag-multi-filter">
               <AttributeSource>flag</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="u1dt-multi-filter">
               <AttributeSource>U1DT</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="fb2-multi-filter">
               <AttributeSource>FB2</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="fb1t-multi-filter">
               <AttributeSource>FB1T</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="scorecat-multi-filter">
               <AttributeSource>scorecat</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="images-multi-filter">
               <AttributeSource>PIXN</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
          <Filter id="vignettes-multi-filter">
               <AttributeSource>VIG1</AttributeSource>
               <ControlType>select-1-drop-down-plus-all</ControlType>
          </Filter>
     </Filters>
     <DataPanels>
          <Control displayed="true">
               <Filters>
                    <Filter>
                         <Description>Drop</Description>
                         <FilterSource>drop-single-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Version</Description>
                         <FilterSource>build-multi-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>On/Off Test</Description>
                         <FilterSource>onoff-single-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Review status</Description>
                         <FilterSource>reviewed-single-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Flag</Description>
                         <FilterSource>flag-multi-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Discipline</Description>
                         <FilterSource>fb1t-multi-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Organ System</Description>
                         <FilterSource>u1dt-multi-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Step 1 outline</Description>
                         <FilterSource>fb2-multi-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Images</Description>
                         <FilterSource>images-multi-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Vignettes</Description>
                         <FilterSource>vignettes-multi-filter</FilterSource>
                    </Filter>
                    <Filter>
                         <Description>Score categories</Description>
                         <FilterSource>scorecat-multi-filter</FilterSource>
                    </Filter>
               </Filters>
          </Control>
          <ItemList displayed="true">
               <Attributes>
                    <Attribute displayed="true">
                         <Description>Item</Description>
                         <AttributeSource>itemref</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>On test</Description>
                         <AttributeSource>onoff</AttributeSource>
                         <ControlType>checkbox-select</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Drop</Description>
                         <AttributeSource>drop</AttributeSource>
                         <ControlType>checkbox-select</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Reviewed</Description>
                         <AttributeSource>reviewed</AttributeSource>
                         <ControlType>check-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Flag</Description>
                         <AttributeSource>flag</AttributeSource>
                         <ControlType>select-1-drop-down</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Description</Description>
                         <AttributeSource>DESCR</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Discipline</Description>
                         <AttributeSource>FB1T</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Organ System</Description>
                         <AttributeSource>U1DT</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Step 1 outline</Description>
                         <AttributeSource>FB2</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    
                    <Attribute displayed="true">
                         <Description>Images</Description>
                         <AttributeSource>PIXN</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Vignettes</Description>
                         <AttributeSource>VIG1</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Diff</Description>
                         <AttributeSource>pvalue</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Discr</Description>
                         <AttributeSource>rbvalue</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Answer Key</Description>
                         <AttributeSource>key</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
                    <Attribute displayed="true">
                         <Description>Notes</Description>
                         <AttributeSource>notes</AttributeSource>
                         <ControlType>text-display</ControlType>
                    </Attribute>
               </Attributes>
          </ItemList>
          <CurrentItemInfo>
               <ItemText displayed="true"/>
               <ItemData>
                    <Attribute>
                         <DataSource>scorecat</DataSource>
                         <ControlType>select-each-value</ControlType>
                    </Attribute>
               </ItemData>
          </CurrentItemInfo>
     </DataPanels>
</IRData>
<?BASELINE FB2-A.02.01 on:4 off:3?>
<?BASELINE FB2-A.02.02 on:4 off:4?>
<?BASELINE FB2-A.03.01 on:3 off:1?>
<?BASELINE FB2-A.03.02 on:0 off:1?>
<?BASELINE FB2-A.03.04 on:3 off:2?>
<?BASELINE FB2-A.03.05 on:1 off:0?>
<?BASELINE FB2-A.03.07 on:4 off:2?>
<?BASELINE FB2-A.04.01 on:2 off:5?>
<?BASELINE FB2-A.04.02 on:5 off:3?>
<?BASELINE FB2-A.04.03 on:3 off:1?>
<?BASELINE FB2-A.04.04 on:1 off:1?>
<?BASELINE FB2-A.05.01 on:12 off:14?>
<?BASELINE FB2-A.05.02 on:9 off:1?>
<?BASELINE FB2-A.05.03 on:0 off:6?>
<?BASELINE FB2-A.06.01 on:7 off:9?>
<?BASELINE FB2-A.06.02 on:2 off:6?>
<?BASELINE FB2-A.06.03 on:10 off:5?>
<?BASELINE FB2-A.06.04 on:1 off:1?>
<?BASELINE FB2-A.07 on:23 off:20?>

Why ResultSet getDate() method returns null when querying .csv file?

Here is the full code:
import java.sql.*;
import java.sql.Types;
import java.sql.Date;
import myjava.support.CachedRowSetMaker;
import javax.sql.rowset.CachedRowSet;
import java.io.IOException;
import java.text.SimpleDateFormat;
import java.util.Calendar;
class jdbc2{
final private String s1="SELECT top 10 [DATE], [ADJ CLOSE] FROM [vwo-1.csv]";
private ResultSet result=null;
private Connection conn=null;
public static void main(String[] args) throws SQLException{
jdbc2 db=new jdbc2();
try {
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          db.conn = DriverManager.getConnection("jdbc:odbc:STOCK_DATA");
          PreparedStatement sql=db.conn.prepareStatement(db.s1);
          db.result=sql.executeQuery();
// check column names and types using the ResultSetMetaData object.
          ResultSetMetaData metaData = db.result.getMetaData();
     System.out.println("Table Name : " + metaData.getTableName(2));
     System.out.println("Field\t\tDataType");
     for (int i = 0; i < metaData.getColumnCount(); i++) {
     System.out.print(metaData.getColumnName(i + 1) + "\t");
     System.out.println(metaData.getColumnTypeName(i+1));
     System.out.print(metaData.getColumnName(1) + "\t"+metaData.getColumnName(2)+"\n");
          while (db.result.next()){
               System.out.print(db.result.getDate("DATE", Calendar.getInstance()));
               System.out.format("\t%,.2f\n", db.result.getFloat("Adj Close"));
catch (Exception e) {
System.out.println("Error: " + e.getMessage());
     finally {
          db.result.close();
          db.conn.close();
Everything works well, until getting to the block
          while (db.result.next()){
               System.out.print(db.result.getDate("DATE", Calendar.getInstance()));
               System.out.format("\t%,.2f\n", db.result.getFloat("Adj Close"));
The getDate("DATE", Calendar.getInstance())); always returns null, instead of the date value in the vwo-1.csv.
Even though I change it to
java.sql.Date d=db.result.getDate("DATE") and convert to String using .toString(), I still gets nulls. The dollar amount in "Adj Close" field is fine, no problem.
The .csv fils is downloaded from YahooFinace.
Can anyone review the code and shed some light as to what I did wrong?
Thanks alot.

CREATE TABLE `login` (
`username` varchar(40) DEFAULT NULL,
`password` varchar(40) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `amount` (
`amountid` int(11) NOT NULL,
`receiptid` int(11) DEFAULT NULL,
`loanid` int(11) DEFAULT NULL,
`amount` bigint(11) DEFAULT NULL,
`latefee` int(11) DEFAULT NULL,
`paymentid` int(11) DEFAULT NULL,
`pid` int(11) DEFAULT NULL,
PRIMARY KEY (`amountid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `applicationfee` (
`applicationfeeid` int(11) DEFAULT NULL,
`applicationamount` int(11) DEFAULT NULL,
`applicationfee` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `category` (
`categoryid` int(11) DEFAULT NULL,
`categoryname` varchar(40) DEFAULT NULL,
`categorydescription` varchar(500) DEFAULT NULL,
`cattype` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `commission` (
`commissionid` int(11) DEFAULT NULL,
`bussiness` int(11) DEFAULT NULL,
`commission` int(11) DEFAULT NULL,
`pid` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `customer` (
`cacno` int(11) NOT NULL DEFAULT '0',
`name` varchar(40) DEFAULT NULL,
`age` int(11) DEFAULT NULL,
`cphone` varchar(40) DEFAULT NULL,
`cmobile` varchar(40) DEFAULT NULL,
`caddress` varchar(500) DEFAULT NULL,
`cstatus` varchar(20) DEFAULT NULL,
`cphoto` longblob,
`pid` int(11) DEFAULT NULL,
PRIMARY KEY (`cacno`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `daybook` (
`closingbal` varchar(40) DEFAULT NULL,
`date` date DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `extraincome` (
`categoryid` int(11) NOT NULL,
`receiptid` int(11) DEFAULT NULL,
`date` date DEFAULT NULL,
`amountid` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `employee` (
`empno` int(11) DEFAULT NULL,
`empname` varchar(40) DEFAULT NULL,
`age` int(11) DEFAULT NULL,
`sal` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `image` (
`id` int(11) DEFAULT NULL,
`image` blob
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `loan` (
`loanid` int(11) NOT NULL DEFAULT '0',
`loanamt` varchar(40) DEFAULT NULL,
`payableamount` double DEFAULT NULL,
`installment` int(11) DEFAULT NULL,
`payableinstallments` int(11) DEFAULT NULL,
`monthlyinstallment` varchar(20) DEFAULT NULL,
`surityname` varchar(20) DEFAULT NULL,
`applicationfeeid` int(11) DEFAULT NULL,
`interestrate` float DEFAULT NULL,
`issuedate` date DEFAULT NULL,
`duedate` date DEFAULT NULL,
`nextduedate` date DEFAULT NULL,
`cacno` int(11) DEFAULT NULL,
`cname` varchar(20) DEFAULT NULL,
`pid` int(11) DEFAULT NULL,
`interestamt` double DEFAULT NULL,
`pendingamt` float DEFAULT NULL,
PRIMARY KEY (`loanid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `md` (
`mdid` int(11) NOT NULL DEFAULT '0',
`mdname` varchar(40) DEFAULT NULL,
`mdphoto` varchar(100) DEFAULT NULL,
`mdphone` varchar(40) DEFAULT NULL,
`mdmobile` varchar(40) DEFAULT NULL,
`mdaddress` varchar(500) DEFAULT NULL,
PRIMARY KEY (`mdid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `partner` (
`pid` int(11) NOT NULL DEFAULT '0',
`pname` varchar(40) DEFAULT NULL,
`paddress` varchar(500) DEFAULT NULL,
`pphoto` varchar(100) DEFAULT NULL,
`pphone` varchar(40) DEFAULT NULL,
`pmobile` varchar(40) DEFAULT NULL,
`pstatus` varchar(20) DEFAULT NULL,
`mdid` int(11) DEFAULT NULL,
`mdname` varchar(40) DEFAULT NULL,
`date` date DEFAULT NULL,
`nextpaydate` date DEFAULT NULL,
PRIMARY KEY (`pid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `partnerinvested` (
`pid` int(11) DEFAULT NULL,
`pname` varchar(20) DEFAULT NULL,
`receiptid` int(11) DEFAULT NULL,
`date` date DEFAULT NULL,
`amountinvested` int(11) DEFAULT NULL,
`latefee` int(11) DEFAULT NULL,
`amountid` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `payments` (
`paymentid` int(11) NOT NULL,
`categoryid` int(11) DEFAULT NULL,
`particulars` varchar(100) DEFAULT NULL,
`amountid` int(11) DEFAULT NULL,
`paymentdate` date DEFAULT NULL,
PRIMARY KEY (`paymentid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `receipts` (
`receiptid` int(11) DEFAULT NULL,
`paiddate` date DEFAULT NULL,
`amountid` int(11) DEFAULT NULL,
`loanid` int(11) DEFAULT NULL,
`latefee` int(11) DEFAULT NULL,
`installment` int(11) DEFAULT NULL,
`cacno` int(11) DEFAULT NULL,
`cname` varchar(40) DEFAULT NULL,
`pid` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;

Error when querying OLAP data with BI answers

Have been doing all the Lessons in "Using Oracle OLAP With Oracle BI Enterprise Edition 10g Release 3". Got till lesson 3 where I'm supposed to query the data with Answers but If I add any of the facts to the report, I get the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17003] Oracle gateway error: Unsupported data type 101. (HY000)
SQL Issued: SELECT Customer."Ship To" saw_0, Measures.COST saw_1 FROM Global ORDER BY saw_0
So I was wondering if anyone knows what the catch could be.
Thanks in advance!

Yes. Me too. I have the same issue and I don't find any information about it. Could anyone help ?

Optimizing performance when querying XML data

I have a table in my database containing information about persons. The table has a xmltype column with a lot of data about that person.
One of the things in there is a telephone number. What I now need to figure out is whether there are any duplicate phone numbers in there.
The xml basically looks like this (simplefied example):
<DATAGROUP>
    <PERSON>
        <BUSINESS_ID>123</BUSINESS_ID>
        <INITIALS>M.</INITIALS>
        <NAME>Testperson</NAME>
        <BIRTHDATE>1977-12-12T00:00:00</BIRTHDATE>
        <GENDER>F</GENDER>
        <TELEPHONE>
            <COUNTRYCODE>34</COUNTRYCODE>
            <AREACODE>06</AREACODE>
            <LOCALCODE>4318527235</LOCALCODE>
        </TELEPHONE>
    </PERSON>
</DATAGROUP>
As a result I would need the pk_id of the table with the xmltype column in it and a id that's unique for the person (the business_id that's also somewhere in the XML)
I've conducted this query which will give me all telephone numbers and the number of times they occur.
SELECT   OD.pk_ID,
           tel.business_id ,
       COUNT ( * ) OVER (PARTITION BY tel.COUNTRYCODE, tel.AREACODE, tel.LOCALCODE) totalcount
       FROM   xml_data od,
       XMLTABLE ('/DATAGROUP/PERSON' PASSING OD.DATAGROUP
                 COLUMNS "COUNTRYCODE" NUMBER PATH '/PERSON/TELEPHONE/COUNTRYCODE',
                         "AREACODE" NUMBER PATH '/PERSON/TELEPHONE/AREACODE',
                         "LOCALCODE" NUMBER PATH '/PERSON/TELEPHONE/LOCALCODE',
                         "BUSINESS_ID" NUMBER PATH '/PERSON/BUSINESS_ID'
             ) tel
       WHERE tel.LOCALCODE is not null --ignore persons without a tel nr
Since I am only interested in the telephone number that occur more than once, I used the above query as a subquery:
WITH q as (
SELECT   OD.pk_ID,
           tel.business_id ,
       COUNT ( * ) OVER (PARTITION BY tel.COUNTRYCODE, tel.AREACODE, tel.LOCALCODE) totalcount
       FROM   xml_data od,
       XMLTABLE ('/DATAGROUP/PERSON' PASSING OD.DATAGROUP
                 COLUMNS "COUNTRYCODE" NUMBER PATH '/PERSON/TELEPHONE/COUNTRYCODE',
                         "AREACODE" NUMBER PATH '/PERSON/TELEPHONE/AREACODE',
                         "LOCALCODE" NUMBER PATH '/PERSON/TELEPHONE/LOCALCODE',
                         "BUSINESS_ID" NUMBER PATH '/PERSON/BUSINESS_ID'
             ) tel
       WHERE tel.LOCALCODE is not null) --ignore persons without a tel nr
SELECT   OD.pk_ID, tel.business_id
FROM   q
WHERE   totalcount > 1
Now this is working and is giving me the right results, but the performance is dreadful with larger sets of data and will even go into errors like "LPX-00651 VM Stack overflow.".
What I see is when I do a explain plan for the query is that there are things happening like "COLLECTION ITERATOR PICKLER FETCH PROCEDURE SYS.XQSEQUENCEFROMXMLTYPE" which seems to be something like a equivalent of a full table scan if I google on it.
Any ideas how I can speed up this query? are there maybe smarter ways to do this?
One thing to note is that the XMLTYPE data is not indexed in any way. Is there a possibility to do this? and how? I read about it in the oracle docs, but they where not very clear to me.

The "COLLECTION ITERATOR PICKLER FETCH" operation means that most likely the XMLType storage is BASICFILE CLOB, therefore greatly limiting the range of optimization techniques that Oracle could apply.
You can confirm what the current storage is by looking at the table DDL, as Jason asked.
CLOB storage is deprecated now in favor of SECUREFILE BINARY XML (the default in 11.2.0.2).
Migrating the column to BINARY XML should give you a first significant improvement in the query.
If the query is actually a recurring task, then it may further benefit from a structured XML index.
Here's a small test case :
create table xml_data nologging as
select level as pk_id, xmlparse(document '<DATAGROUP>
    <PERSON>
        <BUSINESS_ID>'||to_char(level)||'</BUSINESS_ID>
        <INITIALS>M.</INITIALS>
        <NAME>Testperson</NAME>
        <BIRTHDATE>1977-12-12T00:00:00</BIRTHDATE>
        <GENDER>F</GENDER>
        <TELEPHONE>
            <COUNTRYCODE>34</COUNTRYCODE>
            <AREACODE>06</AREACODE>
            <LOCALCODE>'||to_char(trunc(dbms_random.value(1,10000)))||'</LOCALCODE>
        </TELEPHONE>
    </PERSON>
</DATAGROUP>' wellformed) as datagroup
from dual
connect by level <= 100000 ;
create index xml_data_sxi on xml_data (datagroup) indextype is xdb.xmlindex
parameters (q'{
XMLTABLE xml_data_xtab '/DATAGROUP/PERSON'
COLUMNS countrycode number path 'TELEPHONE/COUNTRYCODE',
        areacode    number path 'TELEPHONE/AREACODE',
        localcode   number path 'TELEPHONE/LOCALCODE',
        business_id number path 'BUSINESS_ID'
call dbms_stats.gather_table_stats(user, 'XML_DATA');
SQL> set autotrace traceonly
SQL> set timing on
SQL> select pk_id
2       , business_id
3       , totalcount
4 from (
5    select t.pk_id
6         , x.business_id
7         , count(*) over (partition by x.countrycode, x.areacode, x.localcode) totalcount
8    from xml_data t
9       , xmltable(
10           '/DATAGROUP/PERSON'
11           passing t.datagroup
12           columns countrycode number path 'TELEPHONE/COUNTRYCODE'
13                 , areacode    number path 'TELEPHONE/AREACODE'
14                 , localcode   number path 'TELEPHONE/LOCALCODE'
15                 , business_id number path 'BUSINESS_ID'
16         ) x
17    where x.localcode is not null
18 ) v
19 where v.totalcount > 1 ;
99998 rows selected.
Elapsed: 00:00:03.79
Execution Plan
Plan hash value: 3200397756
| Id | Operation            | Name          | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |               |   100K| 3808K|       | 2068   (1)| 00:00:25 |
|* 1 | VIEW                |               |   100K| 3808K|       | 2068   (1)| 00:00:25 |
|   2 |   WINDOW SORT        |               |   100K| 4101K| 5528K| 2068   (1)| 00:00:25 |
|* 3 |    HASH JOIN         |               |   100K| 4101K| 2840K|   985   (1)| 00:00:12 |
|   4 |     TABLE ACCESS FULL| XML_DATA      |   100K| 1660K|       |   533   (1)| 00:00:07 |
|* 5 |     TABLE ACCESS FULL| XML_DATA_XTAB |   107K| 2616K|       |   123   (1)| 00:00:02 |
Predicate Information (identified by operation id):
   1 - filter("V"."TOTALCOUNT">1)
   3 - access("T".ROWID="SYS_SXI_0"."RID")
   5 - filter("SYS_SXI_0"."LOCALCODE" IS NOT NULL)
Statistics
          0 recursive calls
          1 db block gets
       2359 consistent gets
        485 physical reads
        168 redo size
    2352128 bytes sent via SQL*Net to client
      73746 bytes received via SQL*Net from client
       6668 SQL*Net roundtrips to/from client
          1 sorts (memory)
          0 sorts (disk)
      99998 rows processed
If the above is still not satisfying then you can try structured storage (schema-based).

How to link two modules of data when querying the data ?

Hi ,
I am using Designer editor to create a form .
I am having two modules with the tables EMPLOYEE and department .
In my form ,I want to display the data of each employee with the department data .
How to link the two tables data in the designer ?
How to View the generated triggers in the designer ?
Thanks
Sai

Two modules means two forms. These are unrelated.
Or do you mean that you have one form with two blocks (master-detail)?
How to link the two tables data in the designer ?You have to define the foreign key on the tables. Based on this FK Forms Generator will generate the code if you create two Module Components (master-detail) in the module. Don't forget to define the Key Based Link on the master block.
How to View the generated triggers in the designer ?You can't. You have tom open the generated FMB file in Forms Builder to see what code is generated.

Error occurred querying a data source in office 365.

I have created a simple infopath form and in one of my dropdown box i am receiving the REST services.
when i run the infopath form 2013 in preview it was running good but when i upload it on to office 365 cloud it's showing me error. i had converted the services into UDL and save it on Data connection Library and it's approved.
Warning
Click OK to resume filling out the form. You may want to check your form data for errors.
The entry has been added to the Windows event log of the server.
log ID:5566
Correlation ID:feb08a9c-9d47-30f5-5d89-60340242d6d1.

Hi,
According to your post, my understanding is that you got error when querying a data source in office 365.
Per my knowleadge, we cannot connect to SharePoint Web Services from InfoPath Forms within SharePoint Online.
Loopback protection is enabled on the SharePoint Online environment and will block calls to SOAP and REST from InfoPath Form Services.
For more information, you can refer to:
Error message when you connect an InfoPath form to a SharePoint Online web service: "An error occurred while connecting to a Web Service"
As a workaround, to look up data for some dropdowns from several external REST Web Services, we need to have a Data Connection library in your Site Collection in which to store the UDCX files.
The steps seem to be:
Create a Data Connection Library in your Site Collection
In the InfoPath ribbon, go to Data, then Data Connections. Your existing data connections should be listed.
Choose the data connection which is hosted on a different domain.
Clink the
Convert to Connection File… button
In the location selector, specify the path to the Data Connection Library you created above.
Leave the
Relative to site collection (recommended) radio button selected.
Click OK
Here is a great blog for your reference:
InfoPath 2013 Forms on Office365 with External REST DataSources
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Memory Leak, Receiver Got Null Message & Consumer limit exceeded on destina

When running program that adds an Object message to a JMS queue and then recieves it. I get the following.
1) interminitent NULL messages recieved.
2) jms.JMSException: [C4073]: Consumer limit exceeded on destination interactionQueueDest. Even though only one receiver can be receiving via the supplied program.
3) After many message are added to the queue 1000's the Message Queue goes to Out Of Memory exception. It should swap to disk!!
STEPS TO FOLLOW TO REPRODUCE THE PROBLEM :
RUN this program via a JSP call in the application server.
JSP
<%@ page language="java" import="jms.*"%>
<html>
<head>
<title>Leak Memory</title>
</head>
<body>
<hr/>
<h1>Leak Memory</h1>
<%
   LeakMemory leakMemory = new LeakMemory();
   leakMemory.runTest(10000,1000);
// NOTE will brake but slower with setting leakMemory.runTest(10000,100);
%>JMS resources must be created:
jms/queueConnectionFactory
jms/interactionQueue
must be created first.
Class:
package jms;
import javax.naming.*;
import javax.jms.*;
public class LeakMemory implements Runnable {
private QueueConnectionFactory queueConnectionFactory = null;
private Queue interactionQueue = null;
private boolean receiverRun = true;
private QueueConnection queueConnection;
private int totalMessageInQueue = 0;
public LeakMemory() {
    init();
   * initialize queues
public void init(){
    try {
      InitialContext context = new InitialContext();
      this.queueConnectionFactory = (QueueConnectionFactory)context.lookup("jms/queueConnectionFactory");
      this.interactionQueue = (Queue) context.lookup("jms/interactionQueue");
    catch (NamingException ex) {
      printerError(ex);
public void runTest(int messageCount, int messageSize){
    this.receiverRun = true;
    Thread receiverThread = new Thread(this);
    receiverThread.start();
    for (int i = 0; i < messageCount; i++) {
        StringBuffer messageToSend = new StringBuffer();
        for (int ii = 0; ii < messageSize; ii++) {
          messageToSend.append("0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789\n");
        QueueConnection queueConnectionAdder = null;
        QueueSession queueInteractionSession = null;
        QueueSender interactionQueueSender = null;
        try {
            //Get a queue connection
            queueConnectionAdder = this.getQueueConnection();
            queueInteractionSession = queueConnectionAdder.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
            interactionQueueSender = queueInteractionSession.createSender(this.interactionQueue);
            ObjectMessage objectMessage = queueInteractionSession.createObjectMessage(messageToSend);
            objectMessage.setStringProperty("PROPERTY", "" + System.currentTimeMillis());
            //Send object
            interactionQueueSender.send(objectMessage,DeliveryMode.PERSISTENT,5,0);
            totalMessageInQueue++;
            //Close Resources
            interactionQueueSender.close();
            queueInteractionSession.close();
            interactionQueueSender = null;
            queueInteractionSession = null;
        } catch (JMSException ex) {
           printerError(ex);
   * run
public void run() {
    while(this.receiverRun){
            try {
              QueueSession interactionQueueSession = this.getQueueConnection().createQueueSession(false, Session.CLIENT_ACKNOWLEDGE);
              QueueReceiver queueReceiver = interactionQueueSession.createReceiver(this.interactionQueue);
              ObjectMessage message = (ObjectMessage)queueReceiver.receive(100);
              if(message != null){
                StringBuffer messageRecived = (StringBuffer)message.getObject();
                //Simulate Doing Something
                synchronized (this) {
                  try {
                    Thread.sleep(400);
                  catch (InterruptedException ex1) {
                    //Can Safely be ignored
                message.acknowledge();
                totalMessageInQueue--;
              } else {
                printerError(new Exception("Receiver Got Null Message"));
              queueReceiver.close();
              interactionQueueSession.close();
              queueReceiver = null;
              interactionQueueSession = null;
            catch (JMSException ex) {
              printerError(ex);
    * Get's the queue Connection and starts it
    * @return QueueConnection The queueConnection
   public synchronized QueueConnection getQueueConnection(){
       if (this.queueConnection == null) {
         try {
           this.queueConnection = this.queueConnectionFactory.createQueueConnection();
           this.queueConnection.start();
         catch (JMSException ex) {
           printerError(ex);
     return this.queueConnection;
   private void printerError(Exception ex){
     System.err.print("ERROR Exception totalMessageInQueue = " + this.totalMessageInQueue + "\n");
     ex.printStackTrace();
}Is there something wrong with the way I'm working with JMS or is it just this unreliable in Sun App Server 7 Update 3 on windows?

1) interminitent NULL messages recieved.Thanks that explains the behavior. It was wierd getting null messages when I know there is messages in the queue.
2) jms.JMSException: [C4073]: Consumer limit exceeded
on destination interactionQueueDest. Even though only
one receiver can be receiving via the supplied
program. No other instances, Only this program. Try it yourself!! It works everytime on Sun Application Server 7 update 2 & 3
heres the broker dump at that error point
[14/Apr/2004:12:51:47 BST] [B1065]: Accepting: [email protected]:3211->admin:3205. Count=1
[14/Apr/2004:12:51:47 BST] [B1066]:   Closing: [email protected]:3211->admin:3205. Count=0
[14/Apr/2004:12:52:20 BST] [B1065]: Accepting: [email protected]:3231->jms:3204. Count=1 [14/Apr/2004:12:53:31 BST] WARNING [B2009]: Creation of consumer from connection [email protected]:3231 on destination interactionQueueDest failed:
B4006: com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4006]: Unable to attach to queue queue:single:interactionQueueDest: a primary queue is already active
3) After many message are added to the queue 1000's
the Message Queue goes to Out Of Memory exception. It
should swap to disk!!The broker runs out of memory. Version in use
Sun ONE Message Queue                   Copyright 2002
Version: 3.0.1 SP2 (Build 4-a)              Sun Microsystems, Inc.
Compile: Fri 07/11/2003         All Rights ReservedOut of memory snippet
[14/Apr/2004:13:08:28 BST] [B1089]: In low memory condition, Broker is attempting to free up resources
[14/Apr/2004:13:08:28 BST] [B1088]: Entering Memory State [B0022]: YELLOW from previous state [B0021]: GREEN - current memory is 118657K, 60% of total memory
[14/Apr/2004:13:08:38 BST] WARNING [B2075]: Broker ran out of memory before the passed in VM maximum (-Xmx) 201326592 b, lowering max to currently allocated memory (200431976 b ) and trying to recover [14/Apr/2004:13:08:38 BST] [B1089]: In low memory condition, Broker is attempting to free up resources
[14/Apr/2004:13:08:38 BST] [B1088]: Entering Memory State [B0024]: RED from previous state [B0022]: YELLOW - current memory is 128796K, 99% of total memory [14/Apr/2004:13:08:38 BST] ERROR [B3008]: Message 2073-192.168.0.50(80:d:b6:c4:d6:73)-3319-1081944517772 exists in the store already [14/Apr/2004:13:08:38 BST] WARNING [B2011]: Storing of JMS message from IMQConn[AUTHENTICATED,[email protected]:3319,jms:3282] failed:
com.sun.messaging.jmq.jmsserver.util.BrokerException: Message 2073-192.168.0.50(80:d:b6:c4:d6:73)-3319-1081944517772 exists in the store already
[14/Apr/2004:13:08:38 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:38 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:39 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:39 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:39 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:39 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:40 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:40 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:40 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:40 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:41 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:42 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:42 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:42 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:42 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:43 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:43 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:43 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:43 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:44 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:44 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:44 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:45 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:45 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:46 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:46 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:47 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:47 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:47 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:47 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:48 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:49 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:49 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:49 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:49 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:50 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:50 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:50 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:50 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:51 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:51 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:51 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:51 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:52 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:52 BST] WARNING [B2076]: Broker is rejecting new producers, because it is extremely low on memory
[14/Apr/2004:13:08:53 BST] ERROR [B3107]: Attempt to free memory failed, taking more drastic measures : java.lang.OutOfMemoryError
[14/Apr/2004:13:08:53 BST] ERROR unable to deal w/ error: 1
[14/Apr/2004:13:08:53 BST] ERROR TRYING TO CLOSE [14/Apr/2004:13:08:53 BST] ERROR DONE CLOSING
[14/Apr/2004:13:08:53 BST] [B1066]:   Closing: [email protected]:3319->jms:3282. Count=0

Error when querying a table through the Query Window

I am running a query on the following table in the ODT Query window - for some reason I get the error below when trying to retrieve the data - I can query the table just fine through SQL Plus - it errors out whether I use grid or text window
ERROR
Arithmetic operation resulted in an overflow.
CREATE TABLE "RF3_PROD_1"."F_EXTRACTMETRICS" ("EXTRACT_NAME" VARCHAR2(50) NOT NULL,"RUN_START_DATE" DATE NOT NULL,"RUN_END_DATE" DATE NOT NULL,"DURATION" NUMBER DEFAULT 0 NOT NULL,"EXTRACT_START_DATE" DATE NULL,"EXTRACT_END_DATE" DATE NULL,"NUM_RECS_ADDED" NUMBER DEFAULT 0 NOT NULL,"NUM_RECS_DELETED" NUMBER DEFAULT 0 NOT NULL,"STATUS" VARCHAR2(50) NOT NULL,"COMMENTS" VARCHAR2(500) NULL) TABLESPACE "EXTRACT_TAB_01_TS" PCTFREE 15 PCTUSED 75 INITRANS 1 MAXTRANS 255 STORAGE ( FREELISTS 1 FREELIST GROUPS 1 INITIAL 8388608 NEXT 516096 MAXEXTENTS 2147483645 MINEXTENTS 1 PCTINCREASE 0 )
I would have formatted it nicer - but that is the way that ODT created it :)

Christian,
I found that this happens when trying to query number fields that are reals with a large decimal value (26 decimal values and above seem to be the magic number). What is strange is that I don't get this problem when I retrieve data from the same table using the Retrieve data option (versus a query for all the data in the Query Window) so they don't seem to be utilizing the same basic code to grab and then display the data interestingly enough (I am sure you knew that). Does this allow you to replicate the issue?
Thanks,
Bryan

Inconsistent SDO_RELATE results when querying 2.5D data

Oracle 11.1.0.7 with Patch 8343061 on Windows Server 2003 32bit.
I'm getting inconsistent results from SDO_RELATE results when querying 2.5D data. Some geometries I expect to be OVERLAPBDYDISJOINT, are not always being returned by SDO_RELATE when using the OVERLAPBDYDISJOINT mask. It seems that the order of the tables makes a difference to the result.
Here's a table with one 2.5D geometry and a 2D index:
CREATE TABLE TEST1 (
ID                NUMBER PRIMARY KEY,
GEOMETRY     SDO_GEOMETRY);
INSERT INTO TEST1 (id, geometry) VALUES (
1,
SDO_GEOMETRY(3002, 2157, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(561695.935, 834005.726, 25.865,
561696.229, 834005.955, 25.867, 561686.278, 834015.727, 26.088, 561685.179, 834019.771, 26.226, 561680.716, 834022.389, 26.226,
561674.434, 834025.125, 26.171, 561671.963, 834032.137, 25.667, 561670.832, 834037.185, 25.619, 561667.946, 834042.976, 25.84,
561666.717, 834047.218, 26.171, 561664.229, 834051.781, 26.778, 561660.041, 834055.935, 26.64, 561657.514, 834061.742, 26.53,
561658.59, 834067.116, 27.882, 561657.67, 834070.739, 28.821, 561653.028, 834073.777, 29.042, 561653.234, 834078.769, 28.379,
561658.336, 834080.105, 29.511, 561664.582, 834079.468, 31.94, 561669.257, 834075.821, 33.707, 561672.716, 834074.456, 33.707,
561676.875, 834077.262, 33.735, 561675.868, 834081.55, 33.707, 561673.131, 834087.641, 33.679, 561672.208, 834093.502, 33.238,
561668.578, 834100.894, 33.735, 561666.013, 834106.399, 33.679, 561661.408, 834111.23, 33.514, 561654.854, 834117.181, 33.486,
561651.695, 834122.292, 33.569, 561649.112, 834128.847, 33.431, 561645.982, 834134.786, 33.293, 561642.485, 834141.235, 33.072,
561642.138, 834150.085, 33.293, 561646.072, 834159.721, 36.578, 561647.274, 834165.532, 37.02, 561646.359, 834170.867, 37.02,
561645.42, 834175.485, 36.799, 561642.44, 834180.977, 36.826, 561638.677, 834185.419, 36.771, 561636.693, 834194.824, 37.158,
561635.462, 834202.105, 37.241, 561631.998, 834208.745, 37.268, 561628.871, 834213.994, 37.241, 561627.554, 834220.393, 37.82,
561625.79, 834226.697, 39.532, 561620.561, 834236.494, 39.891, 561619.265, 834249.687, 39.697, 561619.883, 834260.02, 41.326,
561620.977, 834264.399, 43.093, 561622.557, 834270.723, 43.452, 561622.172, 834276.978, 43.452, 561621.347, 834285.541, 43.479,
561622.214, 834292.055, 43.645, 561619.718, 834302.583, 43.755, 561616.762, 834316.47, 43.755, 561608.842, 834328.241, 43.7,
561606.346, 834334.93, 43.7, 561605.27, 834341.929, 43.7, 561603.925, 834350.648, 43.728, 561602.462, 834358.405, 43.838,
561599.552, 834366.629, 44.031, 561594.551, 834374.291, 43.396, 561590.644, 834383.986, 43.065, 561588.48, 834392.21, 44.942,
561586.923, 834397.32, 46.737, 561584.608, 834402.898, 49.299, 561581.389, 834410.194, 50.077, 561580.437, 834419.49, 51.907,
561580.438, 834427.63, 53.127, 561582.245, 834433.389, 55.791, 561586.664, 834433.397, 57.503, 561593.88, 834433.608, 57.475,
561596.305,834439.653, 57.42, 561591.804, 834445.862, 57.309, 561589.097, 834447.689, 57.014)));
SELECT sdo_geom.validate_geometry_with_context(geometry, 0.0005) FROM TEST1;
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'TEST1' AND column_name = 'GEOMETRY';
INSERT INTO user_sdo_geom_metadata VALUES ('TEST1','GEOMETRY',
     MDSYS.SDO_DIM_ARRAY(
     MDSYS.SDO_DIM_ELEMENT('X',400000,750000,0.0005),
     MDSYS.SDO_DIM_ELEMENT('Y',500000,1000000,0.0005),
     MDSYS.SDO_DIM_ELEMENT('Z',-10000,10000,0.0005)
), 2157);
DROP INDEX TEST1_SPIND;
CREATE INDEX TEST1_SPIND ON TEST1(GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('layer_gtype=line sdo_indx_dims=2');And here's another table with a 2D geometry and a 2D index:
CREATE TABLE TEST2 (
ID                NUMBER PRIMARY KEY,
GEOMETRY     SDO_GEOMETRY);
INSERT INTO TEST2 (id, geometry) VALUES (
1,
SDO_GEOMETRY(2002, 2157, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(561816.516, 834055.581, 561819.504, 834057.173,
561817.942, 834060.818, 561810.044, 834078.997, 561805.576, 834087.634, 561801.572, 834094.299, 561798.558, 834100.467,
561796.254, 834107.637, 561793.754, 834115.605, 561794.049, 834123.694, 561793.698, 834130.518, 561792.905, 834138.883,
561787.867, 834145.772, 561782.544, 834150.548, 561777.707, 834156.53, 561773.945, 834161.32, 561771.061, 834166.957,
561768.155, 834173.131, 561764.735, 834178.744, 561759.603, 834187.782, 561756.146, 834195.493, 561753.416, 834198.821,
561754.141, 834205.691, 561756.768, 834209.681, 561757.217, 834216.701, 561753.086, 834232.46, 561744.371, 834254.589,
561740.936, 834263.001, 561737.198, 834272.208, 561732.231, 834284.915, 561730.52, 834297.01, 561728.339, 834310.053,
561727.825, 834328.069, 561730.461, 834342.992, 561729.808, 834367.948, 561730.216, 834396.988, 561732.273, 834419.047,
561732.783, 834424.668, 561731.647, 834432.212, 561731.872, 834439.436, 561731.39, 834449.269, 561732.041, 834462.813,
561733.583, 834471.926, 561733.229, 834485.049, 561730.868, 834498.462, 561726.379, 834512.59, 561725.776, 834528.932,
561727.488, 834555.23, 561729.357, 834577.873, 561731.05, 834595.931, 561731.163, 834611.928, 561734.057, 834637.031,
561732.67, 834636.4, 561725.401, 834633.796, 561721.039, 834632.493, 561718.777, 834632.167, 561710.437, 834632.888,
561647.929, 834636.658, 561644.963, 834630.085, 561632.796, 834629.813, 561625.553, 834627.647, 561620.473, 834626.711,
561608.718, 834624.94, 561599.935, 834619.684, 561596.67, 834613.843, 561594.27, 834607.774, 561592.513, 834601.752,
561591.349, 834593.899, 561597.265, 834584.888, 561595.956, 834571.479, 561595.075, 834556.196, 561593.997, 834539.68,
561594.316, 834528.071, 561595.261, 834516.44, 561595.538, 834504.804, 561597.227, 834497.417, 561599.3, 834490.416,
561601.265, 834482.61, 561605.126, 834475.502, 561599.232, 834473.683, 561593.076, 834471.379, 561599.154, 834451.112,
561589.097, 834447.689, 561591.804, 834445.862, 561596.305, 834439.653, 561593.88, 834433.608, 561582.245, 834433.389,
561580.438, 834427.63, 561580.437, 834419.49, 561581.389, 834410.194, 561584.608, 834402.898, 561586.923, 834397.32,
561588.48, 834392.21, 561590.644, 834383.986, 561594.551, 834374.291, 561599.552, 834366.629, 561602.462, 834358.405,
561603.925, 834350.648, 561605.27, 834341.929, 561606.346, 834334.93, 561608.842, 834328.241, 561616.762, 834316.47,
561619.718, 834302.583, 561622.214, 834292.055, 561621.347, 834285.541, 561622.172, 834276.978, 561622.557, 834270.723,
561620.977, 834264.399, 561619.883, 834260.02, 561619.265, 834249.687, 561620.561, 834236.494, 561625.79, 834226.697,
561627.554, 834220.393, 561628.871, 834213.994, 561631.998, 834208.745, 561635.462, 834202.105, 561636.693, 834194.824,
561638.677, 834185.419, 561642.44, 834180.977, 561645.42, 834175.485, 561646.359, 834170.867, 561647.274, 834165.532,
561646.072, 834159.721, 561642.138, 834150.085, 561642.485, 834141.235, 561645.982, 834134.786, 561649.112, 834128.847,
561651.695, 834122.292, 561654.854, 834117.181, 561661.408, 834111.23, 561666.013, 834106.399, 561668.578, 834100.894,
561672.208, 834093.502,561673.131, 834087.641, 561675.868, 834081.55, 561676.875, 834077.262, 561672.716, 834074.456,
561669.257, 834075.821, 561664.582, 834079.468, 561658.336, 834080.105, 561653.234, 834078.769, 561653.028, 834073.777,
561657.67, 834070.739, 561658.59, 834067.116, 561657.514, 834061.742, 561660.041, 834055.935, 561664.229, 834051.781,
561666.717, 834047.218, 561667.946, 834042.976, 561670.832, 834037.185, 561671.963, 834032.137, 561674.434, 834025.125,
561680.716, 834022.389, 561685.179, 834019.771, 561686.278, 834015.727, 561696.229, 834005.955, 561695.935, 834005.726,
561677.805, 833994.91, 561683.163, 833985.817, 561703.01, 833949.434, 561725.891, 833961.856, 561744.35, 833971.197,
561768.396, 833983.86, 561777.842, 833988.883, 561798.333, 833999.743, 561797.243, 834005.725, 561783.574, 834040.515,
561798.127, 834046.391, 561807.001, 834050.509, 561816.516, 834055.581)));
SELECT sdo_geom.validate_geometry_with_context(geometry, 0.0005) FROM TEST2;
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'TEST2' AND column_name = 'GEOMETRY';
INSERT INTO user_sdo_geom_metadata VALUES ('TEST2','GEOMETRY',
     MDSYS.SDO_DIM_ARRAY(
     MDSYS.SDO_DIM_ELEMENT('X',400000,750000,0.0005),
     MDSYS.SDO_DIM_ELEMENT('Y',500000,1000000,0.0005)
), 2157);
DROP INDEX TEST2_SPIND;
CREATE INDEX TEST2_SPIND ON TEST2(GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('layer_gtype=line sdo_indx_dims=2');Now if I check how these two geometries relate to each other, the answer is OVERLAPBDYDISJOINT, which makes sense when inspecting the geometries.
SQL> SELECT
2 sdo_geom.relate(t1.geometry, 'determine', t2.geometry, 0.0005) relate_1_to_2,
3 sdo_geom.relate(t2.geometry, 'determine', t1.geometry, 0.0005) relate_2_to_1
4 FROM test2 t2, test1 t1
5 WHERE t1.id = t2.id;
RELATE_1_TO_2        RELATE_2_TO_1
OVERLAPBDYDISJOINT   OVERLAPBDYDISJOINT
1 row selected.So, I'd expect this query to return something...
SELECT /*+ ORDERED */ t1.id, t2.id, sdo_geom.relate(t1.geometry, 'determine', t2.geometry, 0.0005) relate
FROM test2 t2, test1 t1
WHERE sdo_relate(t1.geometry, t2.geometry, 'mask=overlapbdydisjoint') = 'TRUE'
AND t1.id = 1
AND t2.id = 1;Nada. And this...
SELECT /*+ ORDERED */ t1.id, t2.id, sdo_geom.relate(t1.geometry, 'determine', t2.geometry, 0.0005) relate
FROM test1 t1, test2 t2
WHERE sdo_relate(t2.geometry, t1.geometry, 'mask=overlapbdydisjoint') = 'TRUE'
AND t1.id = 1
AND t2.id = 1;Nada.
And this...
SQL> SELECT /*+ ORDERED */ t1.id, t2.id, sdo_geom.relate(t1.geometry, 'determine', t2.geometry, 0.0005) relate
2 FROM test2 t2, test1 t1
3 WHERE sdo_relate(t2.geometry, t1.geometry, 'mask=overlapbdydisjoint') = 'TRUE'
4 AND t1.id = 1
5 AND t2.id = 1;
        ID         ID RELATE
         1          1 OVERLAPBDYDISJOINT
1 row selected.This version gives the right answer.
Can anyone explain this?

Hi,-
I think you are running into these bugs 7158518 and 7710726.
Could you please request the patch for the bugs so that they are published on Metalink
if they dont exist there?
Please let us know if these fix your problem.
Best regards
baris

Operating Unit List Of Values is Null When Entering Transaction Types

Hi,
Operating Unit List Of Values is null when entering Transaction Types in Receivables Manager responsibility. I also re-checked MO: Security Profile and MO:Operating Unit Profile options that were set correctly. Please let me know how to troubleshoot the problem and fix accordingly.
Thanks for the help.
Regards,
Sri

There are some pointers in the below note
Troubleshooting Transaction Types In Oracle Receivables [ID 1090878.1]
Mahendra

Display Null when the column has a particular date value

Experts,
I have write the below query in Date column,
CASE WHEN Table.Column='Bad A'
THEN CAST(Null as "Table"."Date")
WHEN Table.Column='Bad b'
THEN CAST(Null as "Table"."Date")
ELSE "Table"."Date"END
but I am getting *" Invalid Alias Format : Table_name.Column_name required"*
Please let me know where I did mistake.
Thanks in Advance.
Thanks,
Balaa...

Is that Table withe data column that you are using to replace the values in the main column using the case statement is an alias table or physical table? If it is alias table, you might want to try to use physical table instead.
Thanks,
-Amith

[svn:fx-trunk] 9407: Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties .

Revision: 9407
Author:   [email protected]
Date:     2009-08-19 15:11:34 -0700 (Wed, 19 Aug 2009)
Log Message:
Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties. This states test exposed this.
We should rethink if we want to clear hostFormat rather than have a hostFormatChanged flag. If there is no hostFormat at measure then it has to be fixed because there is no line break format to check for auto-size.
QE notes:
Doc notes:
Bugs: SDK-22779
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22779
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as

Oh my god, it is too long! You definitely check out types, casting and especially ODP.Net (it does everything for you)... etc. They can help you to simplify your code. I do not have enough time to copy paste it to Studio and understand and solve your issue, so I got title of your message as your main question.
In Oracle, you can create an autonumber field by using sequences object. This is really useful when you need to create a unique number to act as a primary key.
Basically you can create a sequence simply typing;
CREATE SEQUENCE MY_SEQUENCE;
now you have a sequence called "MY_SEQUENCE"... Then, I advice you select a number from sequence;
select MY_SEQUENCE.nextval from dual;
I said I advice actually kinda must, although it called sequence, I cannot be sequential. Do not even try to predict the value. You can be sure that it is unique number so you can use it.
Then insert you record and use that number part of your primary key. I think that's it. Have fun.

Delay when querying from CUBE_TABLE object, what is it?

Hi Guys,
We are using Oracle OLAP 11.2.0.2.0 with an 11g Cube, 7 Dimensions, Compressed and partitioned by Month.
We have run into a performance issue when implementing OBIEE.
The main issue we have is a delay while drilling on a hierarchy. Users have been waiting 7-12 seconds per drill on a hierarchy, and the query is only returning a few cells of data. We have managed to isolate this to slow performing queries on CUBE_TABLE.
For example, the following query returns one cell of data:
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('E01' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885' )
AND FINSTMNT_VIEW.TIME IN ('JUN11' ) ;
1 Row selected in 4.524 Seconds
Note: FINSTMNT_VIEW is the automatically generated cube view.
CREATE OR REPLACE FORCE VIEW "SCHEMA1"."FINSTMNT_VIEW" ("BASE","REPORT_TYPE", "COMPANY", "SCENARIO", "PRODUCT", "ACCOUNT", "SITE", "TIME")
AS
SELECT "BASE", "REPORT_TYPE", "COMPANY", "SCENARIO", "PRODUCT", "ACCOUNT", "SITE", "TIME"
FROM TABLE(CUBE_TABLE('"SCHEMA1"."FINSTMNT"') ) ;
If we increase the amount of data returned by adding to the query, it only increased the query time by .4 seconds
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('E01' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885', 'C010886', 'C010891', 'C010892', 'C010887', 'C010888', 'C010897', 'C010893', 'C010890', 'C010894', 'C010896', 'C010899' )
AND FINSTMNT_VIEW.TIME IN ('JUN11' ) ;
12 rows selected - In 4.977 Seconds
If we increase the data returned even more:
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('ET', 'E01', 'E02', 'E03', 'E04' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT', 'P00' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885', 'C010886', 'C010891', 'C010892', 'C010887', 'C010888', 'C010897', 'C010893', 'C010890', 'C010894', 'C010896', 'C010899' )
AND FINSTMNT_VIEW.TIME IN ('JUN11', 'JUL11', 'AUG11', 'SEP11', 'OCT11', 'NOV11', 'DEC11', 'JAN12') ;
118 rows selected - In 14.213 Seconds
If we take the time for each query and divide by the number of rows, we can see that querying more data results in a much more efficient query:
Time/Rows returned:
1 Row - 4.524
12 Rows - 0.4147
118 Rows - 0.120449153
It seems like there is an initial delay of approx 4 seconds when querying the CUBE_TABLE object. Using AWM to query the same data using LIMIT and RPR is almost instantaneous...
Can anyone explain what this delay is, and if there is any way to optimise the query?
Could it be the AW getting attached before each query?
Big thanks to anyone that can help!

Thanks Nasar,
I have run a number of queries with logging enabled, the things you mentioned all look good:
Loop Optimization: GDILoopOpt     COMPLETED
Selection filter: FILTER_LIMITS_FAST     7
ROWS_FAILED_FILTER     0
ROWS_RETURNED     1
Predicates: 7 pruned out of 7 predicates
The longest action I have seen in the log is the PAGING operation... but I do not see this on all queries.
Time Total Time OPERATION
2.263     27.864          PAGING     DYN_PAGEPOOL     TRACE     GREW     9926KB to 59577KB
1.825     25.601          PAGING     DYN_PAGEPOOL     TRACE     GREW     8274KB to 49651KB
1.498     23.776          PAGING     DYN_PAGEPOOL     TRACE     GREW     6895KB to 41377KB
1.232     22.278          PAGING     DYN_PAGEPOOL     TRACE     GREW     5747KB to 34482KB
1.17     21.046          PAGING     DYN_PAGEPOOL     TRACE     GREW     4788KB to 28735KB
1.03     19.876          PAGING     DYN_PAGEPOOL     TRACE     GREW     3990KB to 23947KB
2.808     18.846          PAGING     DYN_PAGEPOOL     TRACE     GREW     3325KB to 19957KB
What is strange is that the cube operation log does not account for all of the query time. For example:
SELECT "BASE_LVL" FROM TABLE(CUBE_TABLE('"EXAMPLE"."FINSTMNT"'))
WHERE
"RPT_TYPE" = 'MTD' AND
"ENTITY" = 'ET' AND
"SCENARIO" = 'ACTUAL' AND
"PRODUCT" = 'PT' AND
"GL_ACCOUNT" = 'APBIT' AND
"CENTRE" = 'TOTAL' AND
"TIME" = 'YR09';
This query returns in 6.006 seconds using SQL Developer, if I then take the CUBE_OPERATION_LOG for this query and subtract the start time from the end time, I only get 1.67 seconds. This leaves 4.3 seconds unaccounted for... This is the same with the my other queries, see actual time and logged time below:
Query     Actual     Logged      Variance
S3     6.006     1.67     4.336
L1     18.128     13.776     4.352
S1     4.461     0.203     4.258
L2     4.696     0.39     4.306
S2     5.882     1.575     4.307
Any ideas on what this could be or how I can capture this 4.3 second overhead?
Your help has been greatly appreciated.

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description:          Dell Wireless 1397 WLAN Mini-Card
IP Address:          192.168.0.118
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Tue Apr 17 16:59:28 2012
Lease Expires:          Wed Apr 18 16:59:28 2012
DNS Servers:          192.168.20.254
                    192.168.30.217
Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description:          Broadcom NetLink (TM) Gigabit Ethernet
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

MailboxExportRequest ContentFilter is "Received -ne $null" when querying by date.

Similar Messages

Maybe you are looking for