Maintain box name in through varaible in Module pool

HI all,
When we create a box on screen then if we give a name to the box it will named that box at the right side (Header part) on the box.
My query is it possible to <b>change the box name through varaible</b> or there is any other possibilities to change that ?
Points are assured.
Thanks
Sanket sethi

Hi Sanket.
What you mentioned is not the NAME of the BOX . It is called TITLE (or TEXT) of the BOX.
We can change it dynamically.
1. Declare a Variable with the Same name as the BOX in the TOP include
DATA : BOX1(30) TYPE C.
2. In the PBO module assign the required text to this variable. It will reflect as a TITLE of the BOX.
BOX1 = 'Hello'.
REWARD IF HELPFUL.

Similar Messages

How to hide subscreen in module pool

hello expert.
i created one Box, and inside box i created one subscreen in Module pool ->layout.and two radio button out side of the Box.
if i select 2nd radio button , want to hide subscreen.
how to hide subscreen. could you please send me the solution asap , it's urgent.
i written below code but not working.
LOOP AT SCREEN.
IF rad2 Eq 'X'
     IF SCREEN-NAME = 'SUB1' .
            SCREEN-INPUT = 0.
            SCREEN-INVISIBLE = 1.
            MODIFY SCREEN.
     ENDIF.
ENDIF.
ENDLOOP.
Regards
srinivas

example:
BOX1
        MATNR [                          ] (Normal screen)
BOX2
        BOM [ BOM-OW] TO [BOM-HIGH] (subscreen)
BOX3
       radio buttons
       push button
       selection screnn etc..
if i selection 2nd radio button i will get.
BOX1
        MATNR [                          ] (Normal screen)
BOX2
        empty
BOX3
       radio buttons
       push button
       selection screnn etc..
my requirement is:
BOX1
        MATNR [                          ] (Normal screen)
BOX3
       radio buttons
       push button
       selection screnn etc..

How to set up for user's request to go through a specific module that i selected

I am testing if it is possible all requests from users should go through a module
that i made or not.
For example, all most web server is setted all requests should go through the
log module for writing log when users request a certain page.
Like this, how to set up the configuration all request should go through a certain
module.
Would you tell me the answer please.

Power on the Time Capsule for a few minutes, then hold in the reset button firmly with a ball point pen or something similar for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Connect an Ethernet cable from one of the LAN <--> Ethernet ports on the back of the Uverse router to the WAN "O" port on the Time Capsule
On your Mac, open up Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Other WiFi Devices tab
Click on the Time Capsule
The setup utility will open up automatically and take a minute to analyze the connections then suggest a setup on a screen that looks like this:
Type in a simple name that you want to use for the Wireless Network Name
Type in a name that you want to use for the Time Capsule device
Type in a password
Verify the password
Click Next
The utility will set everything up for you in a minute or two. When you see the message of Setup Complete on the screen, click Done
You can now log onto the wireless network that you created by selecting the name and entering the password
Post back on your progress and we will next get backups going again

How to capture the selected values from module pool dialog list box !

Hi experts,
Can anyone help me out in capturing the values from the list box.
i am able to set the values in the list box.But i am not able to capture the selected value from the list box. Always the list box name is getting as "space"
I also tried in using the FM "VRM_GET_VALUES" but it is retireving all the values. Is there is any flag for filttering out the selected value.
Your inputs are appreciated.
Thanks,
Vijay.

Along with the PBO and PAI event, add a POV event in the flow logic of the screen
DEMO_DROPDOWN_LIST_BOX -is a good demo example.
PROCESS ON VALUE-REQUEST.
FIELD structure_name-field_name MODULE create_dropdown_box.
In the report :
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
sdyb_conn-carrid will contain your selected field

Is it possible to enter our own value in dropdown list box in Module Pool. How?

Dear Experts,
Being new to ABAP, I am trying my hands on Dropdownlist box on Module Pool.
I want to pull data from Ztable(Custom Table) into Dropdown list box on Screen in Module pool and be able to edit it, delete it and enter new data through it, thus thereby able to manage the Ztable. Is it possible in dropdown.
Looking forward for experts advice.
Regards
Deepika

Dear Kannan,
Thanks. But why sud I write an event in Table maintenance generator. My code is in Module Pool and it has no connection with Table Msintenance.
The I/O field Drop down list box is on the Screen in my Module Pool. I am able to pull data in it from Ztable but now I want to edit this pulled data and also want to enter new data in this dropdown list box.
Regards
Deepika

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*&      Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
    CREATE OBJECT v_custom_container
      EXPORTING
        container_name              = 'NARRATION1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT v_editor
      EXPORTING
        wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
        wordwrap_position          = line_length
        wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                     = v_custom_container
      EXCEPTIONS
        error_cntl_create          = 1
        error_cntl_init            = 2
        error_cntl_link            = 3
        error_dp_create            = 4
        gui_type_not_supported     = 5
        OTHERS                     = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " editor_output
getting textdata in internal table as follows
*&      Form create_text
FORM create_text .
REFRESH : it_texttable,
            it_text.
IF v_doc_number IS NOT INITIAL.
    IF v_editor IS NOT INITIAL.
      CALL METHOD v_editor->get_text_as_r3table
        IMPORTING
          table                  = it_texttable
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          error_dp_create        = 3
          potential_data_loss    = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

Data insert through module pool programming

hi
I want to insert the data into the data base through module pool programming.I am taking the fields from different tables, I need sample code ,please help me

Hi Dhanunjay,
REPORT zpe_str_le .
TABLES : zpe_str , zprd_mis1 , mseg , t001l.
*DATA : STR TYPE C VALUE '50'.
data : text(100) VALUE 'DELETED STORAGE LOCATION NO '.
SELECTION-SCREEN : BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-005.
SELECT-OPTIONS : S_ZSLOC FOR ZPE_STR-ZSLOC,
S_ZMACD FOR ZPE_STR-ZMACD,
S_ZPGRP FOR ZPE_STR-ZPGRP.
SELECTION-SCREEN : END OF SCREEN 123.
DATA : flag(1) TYPE c,
flag1 TYPE c ,
flag3 TYPE c VALUE '1'.
DATA : etab LIKE t001l OCCURS 0 WITH HEADER LINE.
SELECT * FROM T001L INTO TABLE ETAB.
DATA : ihead LIKE thead.
DATA : prevtab LIKE tline OCCURS 0 WITH HEADER LINE.
data : Jtab like TLINE occurs 0 with header line.
DATA : jtab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : itab LIKE zprd_mis1 OCCURS 0 WITH HEADER LINE.
*SELECT * FROM zprd_mis1 INTO TABLE itab.
DATA : BEGIN OF itab_sloc OCCURS 0,
werks LIKE t001l-werks,
lgort LIKE t001l-lgort,
lgobe LIKE t001l-lgobe,
END OF itab_sloc.
*FLAG = 0.
CALL SCREEN 100.
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'RET'.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 100.
*PERFORM PREVIEW.
LOOP AT prevtab.
WRITE : / prevtab.
ENDLOOP.
LOOP AT JTAB[] INTO ZPRD_MIS1.
WRITE : Jtab-TDFORMAT.
WRITE : Jtab-TDLINE .
*********ZPRD_MIS1-MANDT = Jtab-TDLINE .
*********ZPRD_MIS1-SLOC = Jtab-TDLINE .
*********ZPRD_MIS1-MCODE = Jtab-TDLINE .
*********ZPRD_MIS1-GCODE = Jtab-TDLINE .
*********ZPRD_MIS1-DESCR = Jtab-TDLINE .
*********INSERT ZPRD_MIS1.
ENDLOOP.
WRITE : JTAB-ZSLOC.
*********CALL TRANSACTION 'SO10'.
SET CURSOR 2 2.
WHEN 'DET'.
SELECT * FROM ZPRD_MIS1 INTO CORRESPONDING FIELDS OF TABLE ITAB.
CALL SCREEN 123 STARTING AT 10 5.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SKIP 2 .
WRITE :/1(8) 'STR.LOC' ,10(15) 'MRP. CTLR',27(10) 'P.GRP' ,39(40) 'DESCRIPTION OF PRODUCT'.
SELECT SLOC MCODE GCODE DESCR FROM zprd_mis1 INTO ZPRD_MIS1 WHERE SLOC IN S_ZSLOC AND
MCODE IN S_ZMACD AND
GCODE IN S_ZPGRP.
WRITE :/1(8) zprd_mis1-SLOC ,10(15) zprd_mis1-MCODE ,27(10) zprd_mis1-GCODE ,39(40) zprd_mis1-DESCR .
ENDSELECT.
WHEN 'CLEAR'.
flag = 4.
IF zpe_str-zsloc NE ' '.
CLEAR zpe_str.
ELSE.
MESSAGE 'ALREADY CLEARED' TYPE 'S'.
ENDIF.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'SAVE'.
IF zpe_str-zdesc NE ' '.
IF zpe_str-zsloc NE ' '.
LOOP AT itab.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0 AND flag = 5.
zprd_mis1-mandt = sy-mandt.
zprd_mis1-sloc = zpe_str-zsloc .
zprd_mis1-mcode = zpe_str-zmacd .
zprd_mis1-gcode = zpe_str-zpgrp.
zprd_mis1-descr = zpe_str-zdesc .
MODIFY zprd_mis1.
flag1 = 7.
MESSAGE 'STORAGE LOCATION MODIFIED' TYPE 'S'.
EXIT.
ELSE.
zprd_mis1-mandt = sy-mandt.
zprd_mis1-sloc = zpe_str-zsloc .
zprd_mis1-mcode = zpe_str-zmacd .
zprd_mis1-gcode = zpe_str-zpgrp.
zprd_mis1-descr = zpe_str-zdesc .
INSERT zprd_mis1.
APPEND itab.
flag = 5.
flag1 = 7.
MESSAGE 'STORAGE LOCATION CREATED' TYPE 'S'.
*MESSAGE 'DATA ALREADY SAVED' TYPE 'S'.
EXIT.
*ENDIF.
ENDIF.
ENDLOOP.
ELSE.
flag = 3.
MESSAGE 'PLEASE ENTER THE STORAGE LOCATION' TYPE 'S'.
ENDIF.
ELSE.
LOOP AT itab.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0.
MESSAGE 'ALREADY SAVED' TYPE 'S'.
ELSE.
MESSAGE 'ENTRIES FOR OTHER FIELDS REQUIRED' TYPE 'S'.
ENDIF.
ENDLOOP.
ENDIF.
WHEN 'CHECK'.
SELECT * FROM zprd_mis1 INTO TABLE itab.
IF zpe_str-zsloc NE ' '.
LOOP AT itab.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0.
zpe_str-zmandt = itab-mandt.
zpe_str-zsloc = itab-sloc.
zpe_str-zmacd = itab-mcode.
zpe_str-zpgrp = itab-gcode.
zpe_str-zdesc = itab-descr.
flag = 7.
flag1 = 7.
ELSE.
MESSAGE 'NO SUCH STORAGE LOCATION AVAILABLE' TYPE 'S'.
EXIT.
ENDIF.
ENDLOOP.
ELSE.
flag = 3.
MESSAGE 'PLEASE ENTER THE STORAGE LOCATION' TYPE 'S'.
EXIT.
ENDIF.
WHEN 'DELETE'.
IF zpe_str-zsloc EQ ' '.
flag = 3.
MESSAGE 'NOSUCH LOCATION AVAILABLE' TYPE 'S'.
ELSE.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0.
zpe_str-zmandt = itab-mandt.
zpe_str-zsloc = itab-sloc.
zpe_str-zmacd = itab-mcode.
zpe_str-zpgrp = itab-gcode.
zpe_str-zdesc = itab-descr.
IF zpe_str-zsloc NE ' '.
CALL FUNCTION 'G_CHECK_PASSWORD'
EXPORTING
password = 'PLANT1'
EXCEPTIONS
not_authorized = 1
canceled = 2
OTHERS = 3.
IF sy-subrc = 0.
PERFORM PREVIEW.
DELETE FROM zprd_mis1 WHERE SLOC = zpe_str-zSLOC.
UPDATE zprd_mis1.
APPEND itab.
MESSAGE 'STORAGE LOCATION DELETED' TYPE 'S'.
ELSEIF SY-SUBRC = 2.
MESSAGE 'OPRATION CANCELLED' TYPE 'E'.
ELSEIF SY-SUBRC = 3.
MESSAGE 'UNAUTHORIZED' TYPE 'E'.
ENDIF.
ELSE.
MESSAGE 'STORAGE LOCATION CONTAINS NO DATA' TYPE 'S'.
ENDIF.
ELSE.
MESSAGE 'STORAGE LOCATION CONTAINS NO DATA' TYPE 'S'.
ENDIF.
ENDIF.
WHEN 'CREATE'.
FLAG3 = 12.
IF zpe_str-zsloc EQ ' '.
MESSAGE 'ENTER THE STORAGE LOCATION' TYPE 'S'.
EXIT.
ELSE.
LOOP AT etab.
READ TABLE etab WITH KEY lgort = zpe_str-zsloc .
IF sy-subrc = 0.
read table itab with key sloc = zpe_str-zsloc .
if sy-subrc = 0.
zpe_str-zmandt = itab-mandt.
zpe_str-zsloc = itab-sloc.
zpe_str-zmacd = itab-mcode.
zpe_str-zpgrp = itab-gcode.
zpe_str-zdesc = itab-descr.
flag = 7.
flag1 = 7.
clear flag .
clear flag1.
message 'storage location alredy exist' type 'S'.
ELSE.
FLAG = 2.
MESSAGE 'STORAGE LOCATION ENTIRES DOESNOT EXIST' TYPE 'S'.
ENDIF.
else.
message 'no such storage location exist' type 'S'.
endif.
endloop.
FLAG = 2.
exit.
endif.
WHEN 'CHANGE'.
SELECT * FROM zprd_mis1 INTO TABLE itab.
IF zpe_str-zsloc NE ' '.
LOOP AT itab.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0.
flag = 5.
flag1 = 6.
zpe_str-zmandt = itab-mandt.
zpe_str-zsloc = itab-sloc.
zpe_str-zmacd = itab-mcode.
zpe_str-zpgrp = itab-gcode.
zpe_str-zdesc = itab-descr.
ELSE.
MESSAGE 'NO STORAGE LOCATION AVAILABLE' TYPE 'S'.
ENDIF.
ENDLOOP.
ELSE.
flag = 3.
MESSAGE 'PLEASE ENTER THE STORAGE LOCATION' TYPE 'S'.
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'AAA'.
SET TITLEBAR 'aaa'.
IF flag3 = '1'.
CALL FUNCTION 'G_CHECK_PASSWORD'
EXPORTING
password = 'PLANT1'
EXCEPTIONS
not_authorized = 1
canceled = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE 'un authorized' TYPE 'S'(001).
LEAVE TO SCREEN 0.
ELSEIF SY-SUBRC = 2.
MESSAGE ' OPERATION CANCELLED' TYPE 'S'(001).
LEAVE TO SCREEN 0.
ELSEIF SY-SUBRC = 3.
LEAVE TO SCREEN 0.
MESSAGE 'RESTRICTED' TYPE 'S'(001).
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR flag3.
ENDIF.
SELECT * FROM zprd_mis1 INTO TABLE itab.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
IF flag = 5 AND flag1 EQ 6.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 1.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'DELETE' OR screen-name = 'CHANGE' OR screen-name = 'CHECK'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
EXIT.
ENDIF.
IF flag = 2.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 1.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'DELETE' OR screen-name = 'CHANGE' OR screen-name = 'CHECK'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
EXIT.
ENDIF.
IF flag3 = 12.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 1.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'DELETE' OR screen-name = 'CHANGE' OR screen-name = 'RET' OR screen-name = 'CHECK'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
EXIT.
CLEAR FLAG3.
ENDIF.
IF flag = 4.
IF screen-name CP 'ZPE_*'.
screen-input = 1.
ENDIF.
ENDIF.
IF flag1 = 7 AND flag = 5.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZSLOC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'DELETE' OR screen-name = 'CHECK' OR screen-name = 'SAVE'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF flag1 = 7 AND flag = 7.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZSLOC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'CHECK' OR screen-name = 'SAVE'." OR screen-name = 'DELETE'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF flag1 = 4 AND flag = 3.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZSLOC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'SAVE' OR screen-name = 'DELETE' OR screen-name = 'CHANGE' OR screen-name = 'CHECK'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
DATA: BEGIN OF r1 OCCURS 1.
INCLUDE STRUCTURE ddshretval.
DATA: END OF r1.
*& Module VALUE_SLOC INPUT
text
MODULE value_sloc INPUT.
SELECT lgort werks lgobe FROM t001l INTO CORRESPONDING FIELDS OF TABLE itab_sloc.
DELETE ADJACENT DUPLICATES FROM itab_sloc COMPARING lgort.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'LGORT'
value_org = 'S'
TABLES
value_tab = itab_sloc
return_tab = r1
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
IF r1-fieldval IS NOT INITIAL.
zpe_str-zsloc = r1-fieldval.
ENDIF.
ENDIF.
EXIT.
*ENDSELECT.
ENDMODULE. " VALUE_SLOC INPUT
FORM PREVIEW.
*TABLES : ZPE_STR , ZPRD_MIS1 , MSEG.
data : ihead like thead.
DATA : prevtab like TLINE occurs 0 with header line.
data : Jtab like TLINE occurs 0 with header line.
*data : Jtab like thead occurs 0 with header line.
*data : text(100).
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'ST'
LANGUAGE = sy-langu
NAME = 'ZSLDEL'
OBJECT = 'TEXT'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES = prevtab[]
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if not prevtab[] is initial.
append lines of prevtab to jtab.
endif.
*IHEAD-TDFDATE = SY-DATUM.
*IHEAD-TDFTIME = SY-UZEIT.
ihead-TDOBJECT = 'TEXT'.
ihead-TDNAME = 'ZSLDEL'.
ihead-TDID = 'ST'.
ihead-TDSPRAS = sy-langu.
type-pools : slis.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = 'SLOCATION'.
*append Jtab.
*Jtab-TDFORMAT = ''.
Jtab-TDFORMAT = '*'.
Jtab-TDLINE = ZPE_STR-ZSLOC.
append Jtab.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = 'DATE'.
*append Jtab.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = SY-DATUM.
*append Jtab.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = 'TIME'.
*append Jtab.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = SY-UZEIT.
*Jtab-TDFORMAT = ''.
*append Jtab.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = ihead
INSERT = 'X'
SAVEMODE_DIRECT = ' '
OWNER_SPECIFIED = ' '
LOCAL_CAT = ' '
IMPORTING
FUNCTION =
NEWHEADER =
TABLES
LINES = Jtab
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = '*'
NAME = '*'
ID = '*'
LANGUAGE = '*'
SAVEMODE_DIRECT = ' '
KEEP = ' '
LOCAL_CAT = ' '
IMPORTING
COMMIT_COUNT =
TABLES
T_OBJECT =
T_NAME =
T_ID =
T_LANGUAGE =
ENDFORM.
*&spwizard: declaration of tablecontrol 'TBLECTL' itself
controls: TBLECTL type tableview using screen 0100.
*&spwizard: lines of tablecontrol 'TBLECTL'
data: g_TBLECTL_lines like sy-loopc.
data: OK_CODE like sy-ucomm.
*&spwizard: output module for tc 'TBLECTL'. do not change this line!
*&spwizard: update lines for equivalent scrollbar
module TBLECTL_change_tc_attr output.
describe table ITAB lines TBLECTL-lines.
endmodule.
*&spwizard: output module for tc 'TBLECTL'. do not change this line!
*&spwizard: get lines of tablecontrol
module TBLECTL_get_lines output.
g_TBLECTL_lines = sy-loopc.
endmodule.
*&spwizard: input module for tc 'TBLECTL'. do not change this line!
*&spwizard: process user command
module TBLECTL_user_command input.
OK_CODE = sy-ucomm.
perform user_ok_tc using 'TBLECTL'
'ITAB'
changing OK_CODE.
sy-ucomm = OK_CODE.
endmodule.
INCLUDE TABLECONTROL_FORMS *
*& Form USER_OK_TC *
FORM USER_OK_TC USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME
CHANGING P_OK LIKE SY-UCOMM.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA: L_OK TYPE SY-UCOMM,
L_OFFSET TYPE I.
&SPWIZARD: END OF LOCAL DATA----
*&SPWIZARD: Table control specific operations *
*&SPWIZARD: evaluate TC name and operations *
SEARCH P_OK FOR P_TC_NAME.
IF SY-SUBRC 0.
EXIT.
ENDIF.
L_OFFSET = STRLEN( P_TC_NAME ) + 1.
L_OK = P_OK+L_OFFSET.
*&SPWIZARD: execute general and TC specific operations *
CASE L_OK.
WHEN 'INSR'. "insert row
PERFORM FCODE_INSERT_ROW USING P_TC_NAME
P_TABLE_NAME.
CLEAR P_OK.
WHEN 'DELE'. "delete row
PERFORM FCODE_DELETE_ROW USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
CLEAR P_OK.
WHEN 'P--' OR "top of list
'P-' OR "previous page
'P+' OR "next page
'P++'. "bottom of list
PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
L_OK.
CLEAR P_OK.
WHEN 'L--'. "total left
PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
WHEN 'L-'. "column left
PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
WHEN 'R+'. "column right
PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
WHEN 'R++'. "total right
PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
WHEN 'MARK'. "mark all filled lines
PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'DMRK'. "demark all filled lines
PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'SASCEND' OR
'SDESCEND'. "sort column
PERFORM FCODE_SORT_TC USING P_TC_NAME
l_ok.
ENDCASE.
ENDFORM. " USER_OK_TC
*& Form FCODE_INSERT_ROW *
FORM fcode_insert_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_LINES_NAME LIKE FELD-NAME.
DATA L_SELLINE LIKE SY-STEPL.
DATA L_LASTLINE TYPE I.
DATA L_LINE TYPE I.
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line *
GET CURSOR LINE L_SELLINE.
if sy-subrc 0. " append line to table
l_selline = <tc>-lines + 1.
*&SPWIZARD: set top line *
if l_selline > <lines>.
<tc>-top_line = l_selline - <lines> + 1 .
else.
<tc>-top_line = 1.
endif.
else. " insert line into table
l_selline = <tc>-top_line + l_selline - 1.
l_lastline = <tc>-top_line + <lines> - 1.
endif.
*&SPWIZARD: set new cursor line *
l_line = l_selline - <tc>-top_line + 1.
*&SPWIZARD: insert initial line *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor *
SET CURSOR LINE L_LINE.
ENDFORM. " FCODE_INSERT_ROW
*& Form FCODE_DELETE_ROW *
FORM fcode_delete_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: delete marked lines *
DESCRIBE TABLE <TABLE> LINES <TC>-LINES.
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
IF <MARK_FIELD> = 'X'.
DELETE <TABLE> INDEX SYST-TABIX.
IF SY-SUBRC = 0.
<TC>-LINES = <TC>-LINES - 1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " FCODE_DELETE_ROW
*& Form COMPUTE_SCROLLING_IN_TC
text
-->P_TC_NAME name of tablecontrol
-->P_OK ok code
FORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
P_OK.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TC_NEW_TOP_LINE TYPE I.
DATA L_TC_NAME LIKE FELD-NAME.
DATA L_TC_LINES_NAME LIKE FELD-NAME.
DATA L_TC_FIELD_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME.
ASSIGN (L_TC_LINES_NAME) TO <LINES>.
*&SPWIZARD: is no line filled? *
IF <TC>-LINES = 0.
*&SPWIZARD: yes, ... *
L_TC_NEW_TOP_LINE = 1.
ELSE.
*&SPWIZARD: no, ... *
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
ENTRY_ACT = <TC>-TOP_LINE
ENTRY_FROM = 1
ENTRY_TO = <TC>-LINES
LAST_PAGE_FULL = 'X'
LOOPS = <LINES>
OK_CODE = P_OK
OVERLAPPING = 'X'
IMPORTING
ENTRY_NEW = L_TC_NEW_TOP_LINE
EXCEPTIONS
NO_ENTRY_OR_PAGE_ACT = 01
NO_ENTRY_TO = 02
NO_OK_CODE_OR_PAGE_GO = 03
OTHERS = 0.
ENDIF.
*&SPWIZARD: get actual tc and column *
GET CURSOR FIELD L_TC_FIELD_NAME
AREA L_TC_NAME.
IF SYST-SUBRC = 0.
IF L_TC_NAME = P_TC_NAME.
*&SPWIZARD: et actual column *
SET CURSOR FIELD L_TC_FIELD_NAME LINE 1.
ENDIF.
ENDIF.
*&SPWIZARD: set the new top line *
<TC>-TOP_LINE = L_TC_NEW_TOP_LINE.
ENDFORM. " COMPUTE_SCROLLING_IN_TC
*& Form FCODE_TC_MARK_LINES
marks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
&SPWIZARD: EGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: mark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = 'X'.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Form FCODE_TC_DEMARK_LINES
demarks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: demark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = SPACE.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
Source : https://forums.sdn.sap.com/click.jspa?searchID=15092700&messageID=5654151
Have A Good Day
Chaitanya.

How to display a screen as Popup Dialog box in Module Pool

Hi All,
I have a requirement to display a popup dialoge box into module pool.
i need to display a screen as a popup on the current screen on a button click.I have developed a screen and in atribute tab i have defined the screen type as modal dialog box but it is displaying previous screen screen is hide i want to display on the same screen as a popup.
Thanks
Narendra

Hi Narendra,
Try to trigger the popup once it is done with the previous action might be anything.
i have shown one sample code where after i click on save button when the data is saved successfully
after that it has to trigger me a popup asking for conformation for the next action.
A small piece of code
INSERT INTO ZORMD1 VALUES WA_ZORMD1.
    IF SY-SUBRC = 0.
      G_LOCAL1 = 0.
      MESSAGE S000. " Data saved successfully and immediately call the popup
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
        EXPORTING
DEFAULTOPTION = 'Y'
TEXTLINE1 = 'SUCCESSFULLY SAVED'
          TITEL = 'POPUP FOR conformation'
         START_COLUMN         = 25
         START_ROW            = 10
        CANCEL_DISPLAY       = 'X'
       IMPORTING
ANSWER = G_PRINT
IF G_PRINT = 'J'.
PERFORM PRINT_OUT.
ENDIF.
Do the modification according to your requirement.
Cheers!!
VEnk@

How to populate list box in module pool program

How to populate list box in module pool program.
Please give me reply as soon as posible
regards,
Venu.

hi,
go thrugh the folling code .
TABLES sdyn_conn.
DATA   ok_code TYPE sy-ucomm.
Global data
TYPES: BEGIN OF type_carrid,
         carrid type spfli-carrid,
         carrname type scarr-carrname,
       END OF type_carrid.
DATA itab_carrid TYPE STANDARD TABLE OF type_carrid.
*& Processing Blocks called by the Runtime Environment                 *
Event Block START-OF-SELECTION
START-OF-SELECTION.
CALL SCREEN 100.
Dialog Module PBO
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
Dialog Modules PAI
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
Dialog Module POV
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
the following code should be included in flow logic of screen
process on value-request.
field scarr-carrname module create_dropdown_box.
in module pool select list box.
hope it is useful.
regards,
sreelakshmi.

Function module to get the name of all the function module used

I want to populate a internal table with the name of all function module used in the submitted program?? Is there any function module which return the name of all the function module used?

Hi Priya
Try this one RPY_FUNCTIONMODULE_READ.
Ranga

I am having difficulties in maintaining a facetime connection through my ipad. It will generally work for 20 seconds or so and then the frame freezes. It is difficult to follow our 2 year grandson. Any fixes?

I am having difficuties in maintaining a Facetime connection through my ipad 2. It will generally work for 20 seconds or so, and then the frame freezes. Sometimes we have audio with a freeze frame picture. It is difficult to maintain the attention of a 2 year grandson anyway, but the the lost connections make it impossible. Any fixes?

This is a connection problem with wifi. Either your wifi is failing, or your internet service is not fast enough for video feed.

Open a File Dialog Box to browse through image files

Hi all
I need to develop a code to open a File Dialog Box to browse through Image Files in Oracle 10g.
Once the Image File is selected i need to save the file in a Table Column in the Backend Table.
Please help me.
Thanks
Nakul Venkatraman

Hi
Thanks for your prompt response on this.
I came across a Sample Form File which would allow the User to browse through files from local PC.
Following is the code :
declare
dirname varchar2(255);
v_filename varchar2(255);
begin
message('1');
tool_env.getvar('E:\', dirname);
message('2');
dirname := dirname || '\project';
message('3');
v_filename := get_file_name(dirname,NULL,
'All Files (*.*)|*.*|' ||
'JPEG Files (*.jpg)|*.jpg|' ||
'Bitmap Files (*.bmp)|*.bmp|' ||
'TIFF Files (*.tif)|*.tif|' ||
'CompuServe Files (*.gif)|*.gif|' ||
'PC Paintbrush Files (*.pcx)|*.pcx|' );
message('4');
if v_filename is not null then
read_image_file(v_filename,'ANY','pp_foto.foto');
end if;
end;
The code is written inside WHEN-BUTTON-PRESSED Trigger.
When i run the form it is not opening the dialog box.
Please help.
Regards
Nakul

Implement report through module pool(by se38).......

Please provide me the steps to implement a report through a module pool(by se38).................
Thanks and Regards
Suman Karmakar
Edited by: suman.career08 on May 27, 2011 10:13 AM
Moderator Message: Please search for available information. Thread Locked.
Edited by: kishan P on May 27, 2011 1:44 PM

Are you able to see the Delete Button, If so then it Definitely comes to AT USER-COMMAND.
WHEN 'VCART'.
LEAVE TO LIST-PROCESSING.
SET PF-STATUS 'LIST'. "This is for List status here you set the Delete button backbutton
loop at i_cart.
WRITE:/01(01) '|', I_CART-CHECK AS CHECKBOX,05(01) '|',
06(40) I_CART-CMAKTX,46(01) '|',
47(30) I_CART-LENGTH,77(01) '|',
78(07) I_CART-CHNG_QTY,85(01) '|',
86(03) WS_UOM,89(01) '|',
90(10) I_CART-LENGTH_LIN,100(01) '|',
101(07) WS_P1,108(01) '|'.
WRITE:/01(108) SY-ULINE.
endloop.
AT USER-COMMAND.
case sy-ucomm.
WHEN 'DELETE'.
" Here you need to delete the record.
"if you want to go back
LEAVE LIST PROCESSING.
"then you will go to main screen,
endcase.
try this approach..

Select current line through push button in module pool

Hi,
I have created one module pool program with table control. There I have inserted on push button where some logic is deployed.
Logic :-
If I push button on current line or any line, that line should be selected in the program. So that I can move that line to next internal table.
But, it always shows first line.
Please suggest the same.

hi amol,
GET CURSOR only works on the number of table control lines that can be displayed on screen at any one time. So, if your screen can display only 4 lines, all you'll ever get from GET CURSOR is a number 1 to 4.
But your screen also knows which of your table control records is currently displayed as the top line of your table control. This information is held in field TC_ITEMS-TOP_LINE (where TC_ITEMS is the name of your table control). By combining these two bits of information, you can find the correct line number of your selected record.
For example in the case you describe where you are clicking on line 5 but GET CURSOR thinks it is line 4 because your screen has moved down a record, I would think that TC_ITEMS-TOP_LINE would be 2. Add 4 and 2 together, subtract 1 and you'll get your correct line number.
hope it helps,
vikas

List Box Problem In MODULE POOL PROGRAM(EDIT MODE)

I Have Developed A MODULE POOL PROGRAM ,
It Basically Consists Of CREATE EDIT and DISPLAY Modes.
CREATE MODE:
When I am Creating For Example FORM NO 1,it is having Fields With drop down list box with values
A,B and C. if I Choose A then That form will Get Created With A value and Form 1 will be created.
EDIT MODE:
The same form If u want to edit In EDIT Mode ,it is displaying value A and it Showing the list box in the fillowing Manner.A,B,C,and A.(This is what the problem I am Facing Know).It Is Displaying the value two times.How to Avoid this ,PLs Help me in this regard.
Thaks & Regards,
Anuradha.

Where ever you are populating the List Box, write a REFRESH statement just before that.
Means Refresh the old content and add new content

Maintain box name in through varaible in Module pool

Similar Messages

Maybe you are looking for