Maintain Excise defaults for pricing condition in TAXINN procedure

Hi all,
I post this message as I'm customizing CIN part for creation and calculation of excise invoice. I have read lot of post but i'm a bit confused about right procedure to adopt. I try to explain:
I'm doing a stardard sales flow (sales order -> delivery -> commercial invoice -> excise invoice) and the only method I have found to flow excise values in excise invoice is to insert pricing conditions in India -> Basic settings -> Determination of excise duty -> Maintain excise defaults for TAXINN procedure.
In this table I have insert pricing conditions I use in my SD pricing schemas (in this case I use a copy of JINFAC). I have insert pricing conditions corresponding to BED % and BED total, and also CESS % and total and S&HCESS % and total.
If I remove pricing condition from this table, corresponing value in excise invoice, when I create it, become 0.
My dubt is if is correct to populate with table to flow excise values in excise invoice. I ask it as I have read differents approach and differents customizing settings applied in similar situations. In particular, I have found documentation in which, for TAXINN procedure, is recommended to leave blank "excise defaults" (with exception of CVD condition). What is the right method to use?
There is one right procedure or, as it seems reading posts, someone have to do his "proper CIN customizing" based on results that have to obtain?
Thanks in advance for any contribute that can help to clarify this situation.
Regards
Gianpaolo

Hi all,
I think to have found solution to my dubt.
If I use "condition based Excise determination" I have to insert records with pricing schema (if is a copy of standard J* schema, like ZINFAC that is a copy of JINFAC) and excise pricing conditions in the transaction below:
India -> Basic settings -> Determination of excise duty -> Condition-based Excise determination -> Classify condition type
To determine value in excise invoice seems that program check before table in transaction described before. If in this table don't find records for pricing schema-excise pricing condition the program check also table in transaction below:
India -> Basic settings -> Determination of excise duty -> Maintain excise defaults
If during this second check find excise pricing conditions insert, can determine equally the values of excise in excise invoice.
This is the result of my checks. I hope this could be useful for other people with similar problem.

Similar Messages

Maintain excise default

Dear friends,
For tax procedure TAXINN I want maintian condition type JEXI, JECS, JHX1 in excise default table but ECS AP, ECS AR,A/P ATI COND Columns are missing in the maintain excise default table, please tell me how to add this colums ,

Hello
For TAXINN, you are required to maintain only the CVD condition type and leave all other fields blank. There is no need for maintaining all other ocndition types.That is required only got TAXINJ.
Regards
Gregory Mathews

MAINTAIN EXCISE DEFAULTS details

Dear Experts,
Please explain the maintain excise defaults under mm CIN configuration detaily.
Thanks in Advance

HI kiran,
Actually when we working with TAXINN we are using these set of conditions like
JMOP-IN:BED setoff %
JMX1- IN BED setoff Total
i.e when we are using TAXINN we are not maintaing Excise percentage in J1ID for this
JMOP- is a % componets eq: 10% or 14% or 16% on how much percentage it has to calculate is the Total set off conditions Like 10 % is on 100 , 14% on 100 .
Like how we are giving in TAXINJ at J1ID Excise rate maintainace for Chater ID and in FTXP-taxcode creation time we use to maintain 100 -in Contions.
If in JMX1 or JMX2,JEX1,JHX1 If we are not maintain To percentages While maintaing conditins in FV11
System will not calculate in PO for the 10%,2%,1%:
Following Conditions how we are maintining tehpercentages in FV11;
For Various acess sequence as per our Config:
JMOPIN:BED setoff %[10] --- ,JMX1IN:A/P BED setoff Total [100]
JECP:IN:A/P ECS setoff[2]---JEX1IN:A/P ECS SetoffT-[100]
JSEP:IN:A/P SHEECS setoff[1]---JHX1IN:A/P SHEECS SetoffT-[100]
I think you are clear now.
With regards
Shrinivas gangoor
Edited by: Shrinivas Gangoor on May 21, 2009 4:01 PM

Maintain Excise Defaults

I have not maintained Maintain Excise Defaults
I am not getting the tax calculated.. in MIGO... while trying to capture and post the invoice...it will be a cause...

Hi,
Not requires to maintain Excise Defaults ,Just keep & map condition types carefully in following path where you specify which condition type is used for which sort of tax.
SPRO --> Logistics general > tax on Goods Movements> India > Condition-Based Excise Classify Condition Types> Determination
Regards,
Biju K

Changing the Sequence of the Access Sequence for Pricing Condition Type

Hi Friends,
We have an access sequence to determine the pricing. We have 8 key combinations for the same.
Customer/Plant/Material/Batch
Sales Org/ Dist Ch/ Cust Region/Plant/Material/ Batch
Price List Type/Currency/Plant/Material/ batch
Plant/Material/ Batch
1st 4 is with batch. and 2nd 4 is without batch. At the time of implementation ie., before 8 years the 1st 4 key combinations were used. But now based on the business need we are not using the 1st 4 key combination rather we are using the 2nd 4 which is without batch.
My question is that can we change the access sequence so that while the system fetches the price it need not go through the entire ( 91,02,401 ) records.
If this is possible then
Will there by any impact during viewing of past data?

Hi,
There are two options.
1)Change the validity dates for those condition records to earlier date.
2)Usually the sytem checks from top to bottom.If it finds the record in first table then it will return that value and stop searching.
As your not required things are on the top,remove the condition records for them using VK12 T.Code.And maintain the records for what condition tables you are required.
Regards,
Krishna.

Standard report for pricing condition.

Hello everyone,
Is there any standard report to see the price maintain in particular condition record in VK11 with different key combination. can anybody tell me in which table it is maintain.
Regards,
Naveed Ansari.

Hi
The Standard report for Pricing condition is V/LD.
You can get datas like Material prices, Individual prices, discounts & surcharge prices, Material list/Material pricing Group with & without scal display, Price list types with & without scale display.
V/LB   SAPMV14A       Change Pricing Report
V/LC   SAPMV14A       Display Pricing Report
V/LD   SAPMV14A       Execute pricing report
V/LE   RV14ALLE       Generate pricing reports
Award if useful to you
Thank you
Edited by: narendran vajravelu on Oct 14, 2008 7:23 AM
Edited by: narendran vajravelu on Oct 14, 2008 7:25 AM

CIN -Maintain Excise Default

Hai SAP Gurus,
     I am facing problem in CIN customization. When I am going to configure the CIN Sap Customizing Implementation Giude> Logistic General> Tax on Goods Movement > India > Basic Setting> Determination of Excise Duty > Maintain Excise Default. Here I am not getting other fields after NCCDA/R. Here how can I get remaining fields (ECCAR,ECCAP,ECCPER,ECC Cond,ADC,A/PAT1Con,A/RAT1Cond.
I am giving details what I am facing problem in TAXINN Procedure..
Tax proc     Cvd cod     Tax code     Tax jur-code   A/PBED Cond A/PAED cond       A/PSED cond
A/RBED cond A/RAED cond A/RSED cond       A/RCESS Cond BED Per     AED Per     SED Per
CESS Per NCCDA/P Cond     NCCDA/R Cond     NCCDPerc -
After NCCD Perc remaining fields are not getting in my procedure. How can i get remaining fields in my procedure.any one please guide to me
Thanks &Regards
sanjay

Hi
Please check which support pack level your in. Also kindly ensure that all the SAP note related to CIN is is present in your system. Ensure that all the relevant notes are present in your system.
Regards
MBS

Mandatory Fields for IDOC ORDERS01 for Pricing Condition EDI1 to trigger

Hi ,
I'm Testing an Inbound ORDRSP using we 19 for Pricing Conditions EDI1. What are the Mandatory Fields for IDOC ORDERS01
Thanks

hello,
I think it's better to execute VA01 to create a sales order; in that way you should have an idea of mandatory fields.
Thanks.

Receive "The page cannot be displayed" for Pricing Conditions

To all,
I receive the message "The page cannot be displayed" for Pricing Conditions when I select the "Accesses" button. I then received the message "HTML field saved to C:\temp\CRM_IPC.html".
This only seems to happen when using the pricing in the service order confirmation.

Hi Bob,
R u using IPC for pricing, if yes just check the connections to the IPC server.
The error is because of the IPC connection not getting established.
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra

Function module to change the value for pricing condition type

Hello experts,
I want to change the value for pricing condition type for an item in the transaction CRMD_ORDER.
I used many function modules but none are working.
Please kindly suggest a function module that will change the value for a condition type .
I have used the following function module but its not working, please correct the coding if anything needs to be changed or added. Please help me .
Thank you.
CLEAR PRCD_COND.
     SELECT SINGLE * FROM PRCD_COND WHERE KPOSN = WA_ORDERADM_I-GUID AND
                                          KSCHL = COND_TY.
IF SY-SUBRC = 0.
*    MOVE-CORRESPONDING PRCD_COND TO L_COND_CHG.
*    CLEAR L_COND_CHG-KBETR.
    L_COND_CHG-STUNR = PRCD_COND-STUNR.
    L_COND_CHG-KBETR = COND_PRC.
*    L_COND_CHG-KSCHL = COND_TY.
    INSERT L_COND_CHG INTO TABLE T_COND_CHG.
L_HEAD_GUID = CRMD_ORDERADM_H-GUID.
L_ITEM_GUID = WA_ORDERADM_I-GUID.
INSERT L_HEAD_GUID INTO TABLE HEAD_GUID.
INSERT L_ITEM_GUID INTO TABLE ITEM_GUID.
    CALL FUNCTION 'CRM_ORDER_READ'
     EXPORTING
       IT_HEADER_GUID                    = HEAD_GUID
       IT_ITEM_GUID                      = ITEM_GUID
     IMPORTING
       ET_ORDERADM_H                     = LT_ORDERADM_H
       ET_ORDERADM_I                     = LT_ORDERADM_I
       ET_PRIDOC                         = IT_PRIDOC_RD
       ET_DOC_FLOW                       = T_DOC_FLOW
*     CHANGING
*       CV_LOG_HANDLE                     =
*     EXCEPTIONS
*       DOCUMENT_NOT_FOUND                = 1
*       ERROR_OCCURRED                    = 2
*       DOCUMENT_LOCKED                   = 3
*       NO_CHANGE_AUTHORITY               = 4
*       NO_DISPLAY_AUTHORITY              = 5
*       NO_CHANGE_ALLOWED                 = 6
*       OTHERS                            = 7
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
MOVE-CORRESPONDING LS_PRIDOC_RD TO L_PRI_COND.
INSERT L_PRI_COND INTO TABLE PRI_COND.
LOOP AT IT_PRIDOC_RD INTO LS_PRIDOC_RD.
MOVE-CORRESPONDING LS_PRIDOC_RD TO L_PRIDOC_CHG.
L_PRIDOC_CHG-PRIC_COND = PRI_COND.
L_PRIDOC_CHG-REF_GUID = LS_PRIDOC_RD-GUID.
L_PRIDOC_CHG-COND_CHANGE = T_COND_CHG.
INSERT L_PRIDOC_CHG INTO TABLE PRIDOC_CHG.
ENDLOOP.
LOOP AT LT_ORDERADM_H INTO LS_ORDERADM_H .
MOVE-CORRESPONDING LS_ORDERADM_H TO L_HEADER.
INSERT L_HEADER INTO TABLE HEADER.
ENDLOOP.
LOOP AT LT_ORDERADM_I INTO LS_ORDERADM_I.
MOVE-CORRESPONDING LS_ORDERADM_I TO L_ITEM.
INSERT L_ITEM INTO TABLE ITEM.
ENDLOOP.
L_FIELD-FIELDNAME = 'STUNR'.
INSERT L_FIELD INTO TABLE FIELD.
L_FIELD-FIELDNAME = 'KBETR'.
L_FIELD-CHANGEABLE = 'X'.
INSERT L_FIELD INTO TABLE FIELD.
L_INPUT-FIELD_NAMES = FIELD.
L_INPUT-REF_KIND = 'E'.
L_INPUT-REF_GUID = LS_PRIDOC_RD-GUID.
L_INPUT-OBJECTNAME = 'PRIDOC'.
INSERT L_INPUT INTO TABLE INPUT.
    CALL FUNCTION 'CRM_ORDER_MAINTAIN'
     EXPORTING
       IT_PRIDOC                     = PRIDOC_CHG
     IMPORTING
       ET_EXCEPTION                  = EXCEPT
     CHANGING
       CT_INPUT_FIELDS               = INPUT.
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
REFRESH EXCEPT.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
    IT_OBJECTS_TO_SAVE         = HEAD_GUID
*   IV_UPDATE_TASK_LOCAL       = FALSE
*   IV_SAVE_FRAME_LOG          = FALSE
*   IV_NO_BDOC_SEND            = FALSE
*   IT_ACTIVE_SWITCH           =
IMPORTING
   ET_SAVED_OBJECTS           = SAVED
   ET_EXCEPTION               = EXCEPT
   ET_OBJECTS_NOT_SAVED       = UNSAVED
* CHANGING
*   CV_LOG_HANDLE              =
* EXCEPTIONS
*   DOCUMENT_NOT_SAVED         = 1
*   OTHERS                     = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK AND WAIT.

Hi,,
To be able to call a function module in an update work process, you must flag it in the Function Builder. When you create the function module, set the Process Type attribute to Update with immediate start
Alternatively u can use this function module.
CRM_STATUS_DATA_SAVE_DB
BAPI_CUSTOMERCRM_CHANGE (If u wish to use a bapi for this).
Also , Let me know what error you got when implementing other function module.Does the function module didnt return any error but still the value is not changed for pricing condition type?

Automatic PO adjustment for pricing condition changes sap

Hello SAP users,
How to prevent automatic PO adjustment for pricing condition changes to purchase order items that are marked for deletion. Please respond.
Thanks

Hi,
Check the settings in below configuration:
SPRO>MM>Purchasings>Conditions>Automatic document adjustment-->Control doc. adjustment.
SAM

Default value for pricing condition

Hi,
I have a requirement for a manual pricing condition for Minimum Order charge - ZMIN - to be automatically populated with a fixed value of £6 when entered manually onto an order.
Please advise if this is possible.
Thanks in advance.
Mike

Thanks for that SAP2020.
Where would I put the default value of £6? When I go into the order, I'd want the user to key in the pricing condition of ZMIN and then the condition value to be automatically populate with £6 automatically rather than having the user key the value manually.
I don't want to use condition records/access sequences to define the £6 as the minimum order charge is at the discretion of the person taking the order.
Thanks again,
Mike

Table for pricing condition type

My pricing condition is like this
MP00-PRICE,MP01-EDUCATION CESS,MP02-VAT,MP03-CST;
The pricing procedure is MP0000;
I have created access sequence & condition record for MP00,MP02,MP03.
But to set the education cess (MP01) to appear automatically kindly let me know which table (NO),(for MP03& MP02-Std table -628 ) was taken would suit the need so that access sequence can be set for it for automatic updation

Dear Pradeep,
From what i understood from your post, the decision on access sequence and tables used entirely depends on the business requirement.
I would advice you to maintain the same access sequence as what is now maintained for the PRICE (MP00-PRICE).
Thanks & Regards,
Hegal K Charles

Decimal Places for Pricing conditions in Purchase info record

Hi guys:
In the material master, Moving average price/std price 2 decimal places, purchase info records -pricing conditions we have option of 2 decimal places.
Is there any we can increase the number of decimal places .?
Thanks
sweth

Hi,
you can either have high prices or high accuracy, but not both together (because field length stays fixed).
Don't think about a modification - to much changes would be necessary. I never have seen a situation, where you needed more than about 6 significant digits (= not '0'): high prices don't have decimals.
So you usually change a factor: Maintain prices for higher or smaller units to get into the correct range. Or you might use different currencies in different situations. You can also maintain prices per 100 or 1000 units (in case of cheap products).
If nothing else is possible, you might use two conditions: one without decimals, second one only decimals, the sum of both can be a very precise high price.
Better to use the option price unit if you want exact value in place.
Kuber

Vendor determination for pricing conditions

Hi experts,
Can we automatically define Vendors for particular pricing conditions?
like we can manually define vendors for Freight at the time of PO
I want it in case of customs duty paid to customs department..
Krishna

Krishna,
When you have special pricing conditions for a selective vendor to whom you are ordering a material (i.e. sending a PO)
for the above, there is a schema groups for vendor to be configured in MM in IMG Display; also called as vendor schema (VS). And it (i.e. VS) consists of special conditions like freight and other special pricing conditions.
Suggestion: To configure the VS follow the steps:
1. define schema groups for vendor,
2. define schema groups for purchase organization
3. assignment of schema groups to purchase organization
by that the configuration setup is done, and now you can use the vendor schema in vendor master (i.e. through XK01)
i.e, in purchasing view of vendor master and then automatically the specified pricing conditions such as freight and etc will be pulled into the PO and it gets invoiced at the time of invoice verification)
And for the CVD condition, the value for this condition can be maintained in condition records through FV11. And when you capture the CVD for the customs before GR. The amount of CVD will be posted to the respective G/L account (i.e. to the CVD (G/L) account which is configured in Maintain company code settings in Tax on goods movements and is part of CIN configuration setup.
Hope this will clarifies you,
Reward, if it helps,
Regards,
Srin.K

Maintain Excise defaults for pricing condition in TAXINN procedure

Similar Messages

Maybe you are looking for