Maintained in a table (TCJ04)

HI Expert,
I am looking for your advice on the problem i am stucked in. I am SAP-FI member. Issue is that:-
"Two users aren't maintained in a table (TCJ04) that is needed to be
assigned as person responsible on a wbs-element. Out from what the person
responsible when this was set up several years ago this is supposed to be
"automatically" populated from a table (TCJ04) also used for EIH (or
alternatively directly from SAP HR).
Since the users are set up for EIH it seems to be a problem for FI, so I would
appreciate if you can help me how to resolve this issue.
Thanks in advance
Best Regards
Bipin Tiwari

Welcome to the Oracle Forums. Please take a few minutes to review the following:
https://wikis.oracle.com/display/Forums/Forums+FAQ                 Oracle Forums FAQ
http://forums.oracle.com/forums/ann.jspa?annID=432                 Before posting on this forum please read
http://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo 10 Commandments for the OTN Forums Member
http://www.catb.org/esr/faqs/smart-questions.html                  How to ask questions the smart way
Following these simple guidelines will ensure you have a positive experience in any forum; not just this one!
Where you want to do this ?
In Database ?
Then you post in wrong forum.
Also what is your os version ,database version ?
In forms ?
Do you want to create table from forms ?
Then what is your form version and database version ?

Similar Messages

Maintain acct determination (table T030B) for posting key IRX / IGX (M8395)

Dear Guru,
I am testing IS-Oil & Gas (Downstream) - Exchanges.
Created Exchange Agreement and Purchase Contract and Sales Contract, Purchase Contract and Sales Contract are assigned to the Exchange Contract.
A PO is created with reference to the Purchase Contract.
Upon post goods receipt in MIGO, encountered error message "Maintain account determination (table T030B) for posting key IRX (Message no. M8395)" that does not allow PGR to get through.
A call-off is created with reference to the Sales Contract.
Similarly, when PGI is performed in VL01N, encountered error message "Maintain account determination (table T030B) for posting key IGX (Message no. M8395)" that does not allow PGI to get through.
Checked in OBYC, there is no transaction key for IRX and IGX.
Please advise. Thank you.
Regards,
WL

Hi WL,
Please use transaction code O54E to maintain the required configuration.
I hope this helps you.
Thanks & Regards
Kalpesh Chavda

Maintain account determination (table T030B) for posting key IRX (M8395)

Dear Guru,
I am testing IS-OIL - Exchanges.
Created Exchange Agreement and Purchase Contract and Sales Contract, Purchase Contract and Sales Contract are assigned to the Exchange Contract.
A PO is created with reference to the Purchase Contract.
Upon post goods receipt in MIGO, encountered error message "Maintain account determination (table T030B) for posting key IRX (Message no. M8395)" that does not allow PGR to get through.
A call-off is created with reference to the Sales Contract.
Similarly, when PGI is performed in VL01N, encountered error message "Maintain account determination (table T030B) for posting key IGX (Message no. M8395)" that does not allow PGI to get through.
Checked in OBYC, there is no transaction key for IRX and IGX.
Please advise. Thank you.
Regards,
WL

Hi WL,
In an Exchange scenario, the account determination entry would have to go added through tcode O54E for this purpose. You would see both the IRX and IGX entry in the above mentioned tcode.
Menu path: IS-OIL Downstream --> EXG --> Account Assignment
You would not be able to see the IRX or IGX transaction key in OBYC.
Hope the above helps.
Thanks.
Edited by: Kok Wai Phang on Jul 10, 2011 7:58 AM

Error Maintaining multi-lingual tables.

Hello, for past few days i have been stack at this error, can't find the solution. So i am bringing my problem here, hoping for an answer.
Platform: Linux Red Hat Enterprise 5
i am on R12.1.3 version and DB: 11g 2 realise.
I need to install a Finnish language on EBS, so i licensed Finnish language in EBS.
As mentioned in subject my problem lies within Maintaining multi-lingual tables.
After i run the adadmin and select Maintain multi-lingual tables, everything is right until the last jobs, where 3 workers fail! here is the error
sqlplus -s APPS/***** @/u01/ar121/VIS/apps/apps_st/appl/ibc/12.0.0/sql/IBCNLINS.sql
Connected.
PL/SQL procedure successfully completed.
MESG
LANGUAGE=AMERICAN
PACKAGE=IBC_CITEM_VERSIONS_PKG
SQLERRM=ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-20000: Oracle Text error:
DRG-50857: oracle error in textindexmethods.ODCIIndexInsert
ORA-20000: Oracle Text error:
DRG-10607: index meta data is not ready yet for queuing DML
DRG-50857: oracle error in drdmlv
ORA-01426: numeric overflow
ORA-30576: ConText Option dictionary loading error
MESG
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 752
select to_date('ERROR')
ERROR at line 1:
ORA-01858: a non-numeric character was found where a numeric was expected
And here is the worker fail
ATTENTION: All workers either have failed or are waiting:
FAILED: file IBCNLINS.sql on worker 1.
FAILED: file CSNLINS.sql on worker 2.
FAILED: file IRCNLINS.sql on worker 3.
the worker error is the same on all three workers, just script is changed.
I am pretty new at EBS, and newbie at DB administration too, so don't be so hard on me. Thx
Edited by: 905194 on Dec 30, 2011 4:17 AM
Edited by: 905194 on Dec 30, 2011 4:20 AM
Edited by: 905194 on Dec 30, 2011 4:23 AM

Was this instance upgraded from 11i and 10g database ? If so, a step in the upgrade may have been missed. Pl see this MOS Doc
Applying The Patch 6678700 Worker 1 Failed: File Cskbcat.Ldt. ERRORS: ORA-20000: Oracle Text error: DRG-50857: oracle error in textindexmethods.ODCIIndexUpdate, DRG-13201: KOREAN_LEXER is desupported (Doc ID 1333659.1)
If you are using 11.2.0.3, MOS Doc 1386945.1 (Oracle Text release 11.2.0.3.0 mandataroy Patches) may be applicable
HTH
Srini

How to maintain variant in table RSRPARAMETRIZA?

Dear Experts,
I have to maintain variant in table RSRPARAMETRIZA via ABAP Program. Some thread in SDN advice the class CL_RSR_PARA but I don't know how to use this class to update the field "Content of Variant" in table RSRPARAMETRIZA.
Please tell me the class or function that can update the variant?
Thank you,
Zilla D.

Hello Narendar,
Check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/45/adee2396f711d1b46b0000e8a52bed/frameset.htm
Also, a table control wizard in Screen Painter(SE51) exists, which takes you step by step through the Table Control generation and also creates code, so you can start using the Table Control right away.
You can either specify a database table, or use an internal table from program.
If you want to use internal table, it needs to be predefined in your program, before you start creating the table control.
Reward if helpful.

Failure during running Maintain Multi-lingual Tables

Hi,
Currently, the system is running with R12.1.1 on RHEL 5.7.
All the prerequisite patches are installed including language performance.
Then, I am adding 4 additional languages. So, what's done is...
1. Activated languages in the license manager.
2. Run Maintain Multi-lingual Tables in AD Admin.
I assigned 16 workers for this, and the last two assignments failed with the following messages.
FAILED: file JTFNLINS.sql on worker 2 for product jtf username JTF.
Deferred: file JTFNLINS.sql on worker 2 for product jtf username JTF. (Deferment number 1 for this job)
Assigned: file JTFNLINS.sql on worker 2 for product jtf username JTF.
FAILED: file FNDNLINS.sql on worker 1 for product fnd username APPLSYS.
Deferred: file FNDNLINS.sql on worker 1 for product fnd username APPLSYS. (Deferment number 1 for this job)
Assigned: file FNDNLINS.sql on worker 1 for product fnd username APPLSYS.
FAILED: file JTFNLINS.sql on worker 2 for product jtf username JTF.
FAILED: file FNDNLINS.sql on worker 1 for product fnd username APPLSYS.
Completed: file AKNLINS.sql on worker 6 for product ak username AK.
There are now 0 jobs remaining (current phase=Done):
0 running, 0 ready to run and 0 waiting.
ATTENTION: All workers either have failed or are waiting:
FAILED: file FNDNLINS.sql on worker 1.
FAILED: file JTFNLINS.sql on worker 2.
So, when I looked at the worker specific logs, followings are the error message.
LANGUAGE=AMERICAN
PACKAGE=JTF_GRID_COLS_PKG
SQLERRM=ORA-01653: unable to extend table JTF.JTF_GRID_COLS_TL by 16 in tablespa
ce APPS_TS_SEED
select to_date('ERROR')
ERROR at line 1:
ORA-01858: a non-numeric character was found where a numeric was expected
Time when worker failed: Tue Sep 06 2011 10:11:16
LANGUAGE=AMERICAN
PACKAGE=FND_LOOKUP_VALUES_PKG
SQLERRM=ORA-01653: unable to extend table APPLSYS.FND_LOOKUP_VALUES by 16 in tab
lespace APPS_TS_SEED
select to_date('ERROR')
ERROR at line 1:
ORA-01858: a non-numeric character was found where a numeric was expected
Time when worker failed: Tue Sep 06 2011 10:11:36
1.
When I had search work, it seems that <not enough space> is causing this.
Or, is there any other reason than this for the failure?
2.
If <not enough space> is causing the failure, how could this be handled/solved?
3.
After the solution is applied, how is <Maintain Multilingual Tables> resumed?
Currently, my status is that I am on pause at the following message;
ATTENTION: All workers either have failed or are waiting:
FAILED: file FNDNLINS.sql on worker 1.
FAILED: file JTFNLINS.sql on worker 2.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Can anyone help me out of this problem...?
Thanks in advance,
- SH

Hi,
When I had search work, it seems that <not enough space> is causing this.
Or, is there any other reason than this for the failure?I believe this is only the reason and you need to add some space to APPS_TS_SEED tablesapce.
ALTER TABLESPACE APPS_TS_SEED add datafile '/<replace with the actual file name path>' size 1024M;
3.
After the solution is applied, how is <Maintain Multilingual Tables> resumed?
Currently, my status is that I am on pause at the following message;If you have not stopped the adadmin, then use adctrl to restart the failed workers.
If you have already stopped/quit adadmin, then run adadmin again.
thanks

Maintain multi lingual tables poor performance

hello all,
i am trying to install 4 new langauges into one of my test environments.
the first stage is to add the language via licence manager - i have done this ok.
the enxt stage is to run 'maintain multi lingual tables' via adadmin
the problme i am having is that one process is taking over 48 hours to fail with snapshot too old, even though i have increased the undo_retention from 10800 to 48000, the job JTFNLINS.sql still fails
I have a tar raised at the moment, but with not much information coming back,
has any one got any tips/hints on how i can get this job working succesfully and in a shorter time?
many thanks
rob

Maybe you have already seen this note 199716.1
Sam
http://www.appsdbablog.com

Maintain Multi-Lingual Tables Option Fails On Cznlins.Sql

Hi all.
I am trying to install Albanian language in a 11.5.10.2 fresh installation.
I applyed all the neccesary patches to come to the NLS apply patch stage.
I followed the link
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316804.1
for applyeing NLS Patch. I have to run the AD Utility Maintain Multi-Lingual Tables ,before applying NLS.
But the workers fail on Cznlins.Sql.
The worker's log shows:
Start time for file is: Wed Jun 18 2008 14:13:08
sqlplus -s APPS/***** @/oracle/prodappl/cz/11.5.0/sql/CZNLINS.sql
PL/SQL procedure successfully completed.
MESG
LANGUAGE = AMERICAN
PACKAGE= CZ_LOCALIZED_TEXTS_PKG
SQLERRM= ORA-01400: cannot insert NULL into ("CZ"."CZ_LOCALIZED_TEXTS"."CREATED_
BY")
select to_date('ERROR')
ERROR at line 1:
ORA-01858: a non-numeric character was found where a numeric was expected
Time when worker failed: Wed Jun 18 2008 14:13:08
My question are:
1.) Has anyone encountered this problem before.On the specific Cznlins.Sql file?
2.) Shall i skip Maintain Multi-Lingual Tables, install the NLS, and run Maintain Multi-Lingual Tables after the installation?Do you recommend me to do this?
Thanks in advance, Soni

Hi hsawwan
i am sending you the Road Map of patches i have applied,in my OEL 4 server enviroment.
1.     Apply patch 4320012
2.     Apply patch 6502082
3.     Apply patch 6323691
4.     Apply patch 6831988
5.     Apply patch 4948577
6.     Apply patch 5713544
7.     Apply patch 4261542
8.     Apply patch 5216496
9.     Apply patch 5753922
10.     Apply patch 6195759
11.     Apply patch 5938515
12.     Apply patch 3830807
13.     Apply patch 4586086
14.     Apply patch 4888294
15.     Apply patch 5989593
16.     Apply patch 3218526
17.     Apply patch 3761838
18.     Apply patch 4206794
19.     Apply patch 5903765
20.     Apply patch 3865683
21.     Apply patch 4619025
22.     Apply patch 6372396
23.     Apply patch 4653225
24.     Installation of Oracle 10g R2 database,software only(different home).
25.     Installation of Oracle 10g R2 companion cd products.
26.     Installation of Oracle 10g R2 pachset2
27.     Apply patch 5257698
28.     Upgrading to Oracle 10g R2
29.     Configuring AutoConfig on db tier
30.     Apply patch 5753621
31.     Prepare for NLS(failed on AD Maintain Multi-Lingual Tables on CZNLINS.sql file)
Is this the right way, before applying NLS, for albanian language?
Do you think i have any conflicts in my list of patches?
Thanks, Soni

Maintain lookup/hierarchy tables from Netweaver Portal

How do we maintain loopup/ hiearchy tables from SAP Portal instead of data manager? Is this part of standard delivered portal content iviews or we need to create custom code to perform this?
Any pointer or guidance or best practice would be greatly appreciated.
Thanks in advance.

Hi,
I think it is not possible to maintain lookup / hierarchy table directly on portal, you can create lookup / hierarchy data on MDM data manager and by using standard Business content of MDM iview or by customizing iview you can represent hierarchy data to portal
refer following link for MDM Portal Content Development Guide
http://help.sap.com/saphelp_nwmdm71/helpdata/en/45/c87d0243e56f75e10000000a1553f6/frameset.htm
Thanks,
Jignesh Patel

Authorisations maintained in custom tables

Hello Everbody,
I just have a small question regarding AC.
For some workflows, authorisations are maintained in custom tables in our system. E.g. a workflow process for asset approval where a certain user can only approve the asset if it is below a certain limit... This limit is maintained in a simple table...
Can AC also handle scenarios like that and check with RAR for "SoD" or "sensitive access"?
Thanks
Andreas

Hello Andreas,
Exploring the feature of Supplementary Rules in RAR should help you in this scenario. You can maintain reference for a table where you have this limit is maintained.
Regards, Varun

How maintaining the connection table for sticky/persistent/non-persistent?

Question about how to maintain the connection table for the source(client) and destination(server) in the CSM(or CSS).
I know the sticky has the table and max size such as 128K(css11501)as per CCO but not clear how works the persistant and non-persistant case.
Q1) persistant. does it maintain the conntion table to tracking the session? then, any information the table size?
Q2) non-persistant. is this also have connection table? then, how it works?
why I'm asking is want to understand how the session keep tracking. for example, the router based on the routing table(stateless) versus PIX firewall has stateful table. As analogue, is the non-persistnet stateless and statefull for the persistent and sticky?
Thnaks in advance,

The CSS uses FCB to maintain information about active connections.
Each connections requires 2 FCB - one for client to vip and one for server to client.
When you boot the CSS it will immediately reserver a good amount of memory to create a list of FCB.
Each connection will then take 2 FCB from the list.
You can do a 'flow stat' from llama mode to verify how much free/used FCB you have.
When running low on FCB, the CSS will try to allocate more memory.
Gilles.

Customisation for F5 is not maintain in j_1iexcref table

Dear Friends,
In our business process some invoices are not relevant for Excise like F5 or Scrap Sales etc.
After creation of Invoice we go for Batch Utilization in J1i3
By this we create 1000 to 1500 excise invoice every day per plant.
in that day if we created any non excisable invoice like f5 or scrap sales invoices.
That day it fetch error:- "Customization for F5 is not maintained in J_1IEXCREF table"
Due to non excisable invoice we are not maintained in "Assign Billing type to Delivery Type"
How we can solved this issue without going J1IIN individual excise invoices generate.
Regards
Arun

If it is a manufacturing plant, you are suppose to create an excise invoice even if any material is not excisable. This is from excise point of view. I am not sure, whether the client is a manufacturer.
Coming to the requirement, in J1I3, you have the option of selecting "SD Document category". Here select "M" and execute, assuming that in F5 you have not made any changes in VOFA.
thanks
G. Lakshmipathi

Custom transaction has to be created to maintain the custom table

My requirement is like this:
We have received the request to create a special transaction to maintain directly the table ZZRPPT_SUBCONPRI (Subcontracting price table).
Currently the table is accessed through transcation code SM30. Access to this t/code is limited due to the security reasons.
So new transaction has to be created to maintain this table.
Could you please suggest in this?
US

Hi Srinivas,
You can create a program and in that you can call the table with the specificied restrictions.
Maintain the transaction code for that program.
Assigning the table
z_view = 'ZZRPPT_SUBCONPRI '.
For the restriction
REFRESH z_funct.
CLEAR z_funct.
z_funct-function = 'ATAB'.
APPEND z_funct.
Lock the table
CALL FUNCTION 'VIEW_ENQUEUE'
EXPORTING
    action    = 'E' "E for Lock
    view_name = z_view.
Call SM30 transaction for 'ZZRPPT_SUBCONPRI'
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    action                       = z_action
    view_name                    = z_view
TABLES
    excl_cua_funct               = z_funct
EXCEPTIONS
    client_reference             = 1
    foreign_lock                 = 2
    invalid_action               = 3
    no_clientindependent_auth    = 4
    no_database_function         = 5
    no_editor_function           = 6
    no_show_auth                 = 7
    no_tvdir_entry               = 8
    no_upd_auth                  = 9
    only_show_allowed            = 10
    system_failure               = 11
    unknown_field_in_dba_sellist = 12
    view_not_found               = 13
    maintenance_prohibited       = 14
    OTHERS                       = 15.
Definately the above solution will work out, because i had implemented for many of my customized tables.
Reward points if helpful.
Kannu.

Short dump while maintaining a database table

Hi SAP experts,
I have created a ZTABLE and a maintenance view for that.We have been maintaining the table since long.Today I opened the maintanence view( SM30) for that table.I clicked on the maintain button and went inside.I did slide the columns for the sake of my convineince .But when I clicked on the back button to come out,it suddenly gave me a dump.When I saw the dump analysis ,it has the following error analysis.
Error analysis:
Inconsistency with structure length of Dictionary structure "ZTABLE".
An inconsistency was discovered when the description of data type "ZTABLE" was accessed: According to the ABAP load, the structure should have been
279 bytes long, according to information from the ABAP Dictionary at runtime, the structure is actually 304 bytes long.
This situation may arise from changes being made to the structure at program runtime.
Please someone explain why the dump has come in detail.
Regards,
Rajesh.

Hello,
Seems that the table structure was changed and the maintenance view wasn't updated.
Try to generate the maintenance view again.
Regards.

How to maintain data in table control

plz send a detail description of how to create table control and maintain data in that table control.

Hello Narendar,
Check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/45/adee2396f711d1b46b0000e8a52bed/frameset.htm
Also, a table control wizard in Screen Painter(SE51) exists, which takes you step by step through the Table Control generation and also creates code, so you can start using the Table Control right away.
You can either specify a database table, or use an internal table from program.
If you want to use internal table, it needs to be predefined in your program, before you start creating the table control.
Reward if helpful.

Maintained in a table (TCJ04)

Similar Messages

Maybe you are looking for