Maintenance Certificate missed in license type

Hello everyone,
We are in the middle of the upgrade to our BW landscape from 3.5 to 7.01. After I upgraded our BWT system today and ready to apply support packages, as usual I go to apply maintenace certificate according to SAP's instruction on "How to Request a Maintenace Certificate manually through SAP support Portal". I found NO "maintenance certificate" under license type, only have "standard and Java" license type. It is very strange since I just applied "maintenance cerfiticate" on 5/15/2009 when I update support package for my BW sandbox (BWS)! Not sure why it is no longer there? Have you guys experience the same? And how can I get my maintenance certificate for my BWT system so I can move forward with my support package update?
Thanks for your help. This is very important since our upgrade is stopped now.
Yujun Ran

Hi,
What kesavan has mentioned above is perfect for manually applying the Maintainance certificates.
These certificates can be made to automatically distribute across the systems in the landscape.
refer to the below FAQ, and also to the below notes;
Note 1280664 - Distribution of maintenance certificates: Troubleshooting
When will a Maintenance Certificate be required by SAP's software logistics tools?*
Maintenance Certificate will be required for all customers as of January '09.
Details:
As of SPAM/SAINT- version 0034 the Maintenance Certificate will be required to import support packages. SPAM/SAINT- version 0034 will be released in January u201909.
All support packages released in 2008 can be applied using a SPAM/SAINT- version prior to version 0034 and therefore do not require a Maintenance Certificate. Hence, when using SPAM/SAINT- version 0034 or higher version, all support packages require a valid Maintenance Certificate in order to be imported.
Java support packages (imported using JSPM) will require a Maintenance Certificate in the near future. Currently a warning is displayed.
Which version of SAP Solution Manager will be required to benefit from automatic deployment of Maintenance Certificates?
SAP Solution Manager 7.0 SP 16 will be required to benefit from automatic deployment.
Regards,
Ravi
Edited by: Ravi Kumar on Jun 23, 2009 8:40 AM
Edited by: Ravi Kumar on Jun 23, 2009 8:44 AM

Similar Messages

Block Sales document if License is missing under any license type

Hi,
We have a scenario where we using multiple license types for a legal regulation. If any license is missing for any license type that determined while screening, the order should be blocked.
For example, For Legal Regulation EAR, we have two License types LTYP1 and LTYP2 and we maintain only License for EAR with LTYP1. During the sales order creation, system screens and found that 2 license types determined. Since 1 license is missing for Legal Regualtion EAR with LTYP2, the order should blocked. But at this moment, system found 1 license with combination EAR with LTYP21 hence it is released.
But when we see the Log, system shows RED indicator against EAR with LTYP2, it means it could not found license for this combination, but the order is released. Our requirement is NOT to release this order and it should determine all the licenses determined for license types
How should we achieved this scenario? Pls help
Regards,
Pradeep

I finally managed to find my way through with this issue so for others who might have the same requirement:
1) Check the check box Check multiple license types under Global Trade Services > Compliance Management > Legal Control > Control Settings for Legal Control
2) Create an entry for the legal regulation and Code List Object PAPOF under Global Trade Services > Customs Management > Customs Code Lists > Assign Customs Code Lists Procedure to Legal Regulation
3) Create the issuing authority for the legal regulation under Global Trade Services > Customs Management > Customs Code Lists > Maintain Customs Code Lists for Legal Regulation
4) Assign the issuing authority to one license type out of two as I've noticed that it won't work if the two license types have the same issuing authority (one created license will release the order).
under Global Trade Services > Compliance Management > Legal Control > Define License Types
Config done on GTS 10.0

How to install maintenance certificate and License with solution Manger?

Hi all,
Is this possible to install maintenance certificate and License with solution Manger atomatically ?
Regards,
Neni

Hi Swaroop,
There is a feature in SAP Solution manager through which we can instal the licenses.
Please see below links,
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/41/42b6397c604278b6626f3d570c98c8/content.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/89/a7c08d740c4cffb491f98801f17d30/content.htm
Thanks,
Jagadish.

SAPKB70104 No queue calculation because of a missing maintenance certificat

Dear SDNites,
I have recently installed ERP6,EHP1 on Linux with DB29.7 for our Sandbox env'.
I am trying to update the SAP patche level for ABAP and BASIS from release-701,level03,patch SAPKA/B70103 to SAPKA/B70106.
My current SPAM level is 7.01/39. When I am trying to calculate the queue after display/define, it thorws an error as follows..
"SAPKB70104 No queue calculation because of a missing maintenance certificate "
My question, as I am using the latest SPAM version..still do I need to have the maintanance certificate in place...?
Pls help me in this regard
Thanks in advance
Venu

Hello Venu,
the fact of running the last/next-to-last version of SPAM is not directly related to the error you're facing.
Besides note #1240265 that Karan Singh suggested, you can request a Maintenance Certificate manually through the SAP Support Portal.
https://websmp209.sap-ag.de/~sapidb/011000358700001504082008E
I hope this information helps.
Best regards,
Tomas Black

Maintenance Certificate through MOPZ

Dear All,
I want to renew my Maintenance Certificate through Service Marketplace and I already have requested Maintenance Certificate
for SRM 7.0 As (ABAP) and AS(JAVA).
As I am able to apply maintenance certificate for SRM 7.0 As JAVA,but not able to get the license of SRM 7.0 AS ABAP.
Is it possible to apply the Maintenance Certificate through MOPZ as I got Solman7.1 SP04 Installed in my System?
I already have gone through the Links below:
http://wiki.sdn.sap.com/wiki/display/SMP/LicenseKeyApplication+%28XX-SER-LIKEY%29
https://websmp209.sap-ag.de/~sapidb/011000358700001857722008E.pdf
Thanks & Regards
Ajitabh

Hi all,
Thanks for your replies.
I want to know one thing As I have applied the maintenance certificates for AS ABAP and AS JAVA of SRM 7.0.
As I got the certificate for JAVA and I have already applied it but still not getting certificate for ABAP.
I did it manually through SMP.
As I have checked in SOLMAN_WORKCENTER->>License Management->>As I can see Two columns as Maintenance Certificate and Received Maintenance Certificate.
While in Maintenance Certificate Column I am getting Yellow LED and in the Received Maintenance Certificate I am getting Green LED for SRM 7.0.I am Confused regarding this Certificate.
Kindly help me out.
Thanks & Regards
Ajitabh

Maintenance certificate

Dear All,
System not generation new Maintenance certificate.
In SDCCN of satellite system log of Maintenance Package job as below.
12.07.2009     20:30:42     Maintenance Package completed     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Not due, due every 0 , last successful run 175430 20090702     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Get License Data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Not due, due every 7 day(s), last successful run 203050 20090709     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Refresh service definitions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Not due, due every 1 day(s), last successful run 203042 20090711     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Refresh sessions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Not due, due every 7 day(s), last successful run 203043 20090709     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Delete old session and log data :     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Next periodic task 0000000089 has been created to run at 20090713202713     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Maintenance Package started     /BDL/SAPLBDL11     0
Please kindly help to resolve problem.
Regards,
Nikunj Thaker.

Dear David,
Thanks for reply.
Manually execute Get License Data in satellite system and log as below.
14.07.2009     10:51:41     Retrieval of license data completed from destination SM_SMNCLNT100_BACK     /BDL/SAPLBDL11     0
14.07.2009     10:51:41      > License data retrieved from Solution Manager and installed     /BDL/SAPLBDL11     0
14.07.2009     10:51:41      > Local system number: 000000000311082908     /BDL/SAPLBDL11     0
14.07.2009     10:51:41     Fetch license data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
14.07.2009     10:51:41     Retrieval of license data started from destination SM_SMNCLNT100_BACK     /BDL/SAPLBDL11     0
After finishing above manually executed Maintenance Package in satellite syste and log as below.
         14.07.2009     10:52:41     Maintenance Package completed     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Not due, due every 0 , last successful run 105141 20090714     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41     Get License Data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Not due, due every 7 day(s), last successful run 203050 20090709     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41     Refresh service definitions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Not due, due every 1 day(s), last successful run 203042 20090713     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41     Refresh sessions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Not due, due every 7 day(s), last successful run 203043 20090709     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41     Delete old session and log data :     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Next periodic task 0000000093 has been created to run at 20090715202713     /BDL/SAPLBDL110
         14.07.2009     10:52:41     Maintenance Package started     /BDL/SAPLBDL11     0
So still there is no difference in log of Maintenance Package after executing Get License Data.
Still i am not getting new maintenance certificate.
Regards,
Nikunj Thaker.

"Automatic Maintenance Certificate" is not updating satellite systems

Hi,
I want to activate Automatic Maintenance Certificate via solution manager to my satellite systems
Solution Manager is 7.01 at SPS23
Satellite systems are all on Netweaver 7.01 SPS06
Right now, Solution Manager receives automatically the maintenance certificate.
Unfortunately, my satellite systems do not receive it.
on my satellite system (PRD - ECC 6.04), in SDCCN, I see that job "Maintenance Package" shows these messages:
Maintenance Package completed
Updating license data completed from destination [Maintenance Package]
No active master Solution Manager destination maintained. [Maintenance Package]
Updating license data not possible [Maintenance Package]
note that I reviewed completely SAP note 1280664 to no avail.

Hi Daniel,
This is exactly the solution.
I finally also found another solution from http://forums.sdn.sap.com/post!reply.jspa?messageID=9122507#9122507
In managed system, goto SDCCN, browse through the menu options to reach task specific settings and then edit the RFC destination settings.
In RFC settings you get to see RFC of SM system.
Make the SM destination as master destination. Tick the Master checkox.
Thanks for your help.

Problem winth install Maintenance certificate

Hello A have a problem with the Maintenance certificate, I genered the certificate but enthe end of de row there is this message:
Limited license requested
I upload this certficate in the backend (t-code: slicense) and the result in the signal red and says on Note on Validity: Not yet valid
In this link Limited license requested says:
License keys for mySAP Business Suite
Additional Documentation
The license key you requested could only be granted for a limited time, for the following reason:
Restricted license key requested
You requested a restricted license key for your system. If you need an unrestricted license key, please request a new, unrestricted license key for the same system under this installation.
I regenerated the certificate but the resul is the same, I don`t know How can I request a new, unrestricted license key for the same system under this installation.?
thanks for your help

HI Naresh
I did these steps and I upload the license in backend but the message says: 2 licenses succesfull installed then in the list of license
there are two red trafic light
ITP Q1851760771 NetWeaver_DB6 11.08.2009 31.12.9999 Perm 0020310707 000000000310985405 Not yet valid
ITP Q1851760771 Maintenance_DB6 11.08.2009 12.11.2009 Perm 0020310707 000000000310985405 Not yet valid
I don`t know what`'s the problem?
any suggestion
Regards
Danny
Edited by: Graciela Troya on Aug 13, 2009 12:35 AM

Maintenance Certificate   Update

Hi,
    I added my development system in solution manager (Through SMSY).I want to configure every 3 months maintenance certificate will be update in development system through solution manager,is it possible,if any one plz guide me to do step by step.
Thanku

Hi,
    Thnaks for response,I am trying to distribute maintenance certificate automatically in solman for the satelite systems.
In the IMG choose the following path: SAP Reference IMG -> SAP
Solution Manager -> Configuration -> Scenario-Specific
Settings -> Change Management -> Node text not found ->
Activate Automatic License Data Distribution.
But I could not find this path in SPRO. So, Where should I activete the automatic distribution. And also please provide the steps needs to be followed both the solman and saltelite systems to automatically distribute the maintenance certificate.
Mine patch level is -- ST - 400 - 0018 .
Mine is job : REFRESH_ADMIN_DATA_FROM_SUPPORT successfully finshing.
guide me for the same to proceed.
Thnaku

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

Report generation for users having specific license type

Hi friends,
For my project purpose i have to generate report which has userId,License type of the user,corresponding composite role and single roles assigned to the user and transaction code.
I can get the report for user and license type from USR06 and roles,transaction from SUIM.
But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
Thanks in advance,
With kind regards
Karthick

> For my project purpose i have to generate report which has
userId,
License type of the user, TCode: USMM
corresponding composite role and single roles assigned to the user and transaction code.
1. Table: AGR_USERS, AGR_TCODES / USR08
2. SUIM -> a) Users by Complex selection criteria -> Execute -> Click on Roles => Full list of Roles per user.
-> b) Transaction -> Executable for users (all selection option)
>
> I can get the report for user and license type from USR06 and roles,transaction from SUIM.
>
> But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
1. As mentioned by Saby: use TCode SQV1 to map all the tables with a meaningful "foreign key".
2. Download all Table contents and map them in excel by using functions.
Regards,
Dipanjan

Need to pull License type from GTS to R3 in case of STO documents

Hi Gurus,
Currently, In standard sales order process, we are using 2 functional modules in R3 to get the ECCN number and license type from GTS. This is required to populate on some billing output.
Functional modules used are:
/SAPSLL/***_DOCS_SD0C_FETCH_R3
/SAPSLL/***_DOCS_SD0C_GET_R3
Using above mentioned functional modules, we can only pull ECCN number and license type from GTS only if we pass sales document number to this FM and further system pulls ECCN and license type from GTS by referring the sales document number.
Issue:
We have a requirement is to pull the License type in case of STO documents also but STO documents/STO deliveries are not checked for GTS check, so we can not use above mentioned functional modules to pull the license type from GTS to R3 because STO/PO / deliveries do not exist in GTS.
I just have the material number with me and I need to pull the license type from GTS to R3.
Could anyone please advise the table name or any structure where i can pass the material number in GTS and can pull the license type to R3.
Your kind response would be appreciated.

Hi DG,
Thanks for your kind response. Regarding your second point, I am already pulling the ECCN number by using one customized functional module so I already have ECCN number with me. Could you please brief me how I can pull the License type linked to an ECCN number. What is the relationship table/ logic for pulling the license type by passing the ECCN number ??
Looking forward to your response.
Regards,
Anoop

Getting error in distribution of Maintenance Certificate via SDCCN

Hello All,
While executing SPAU in ECC 6.0 I am getting error in distribution of Maintenance Certificate via SDCCN.
While I am trying to download note 0001293657 Fehler bei Verteilung von Wartungszertifikaten über SDCCN- I am getting error in distribution of Maintenance Certificate via SDCCN...Please suggest

Hi,
Check wheather your Maintenance certificate is valid or not.
For checking the same goto Slicense TCODE.
Thanks
Anil

UCM: File is missing. Exception type is 'java.lang.Throwable'.

We have been having an intermittent issue with SES crawling UCM's data. There is a loose correlation between the issue occurring and the following exception appearing in UCM's Content Server Log:
File is missing. Exception type is 'java.lang.Throwable'. [ Details ]
An error has occurred. The stack trace below shows more information.
!syFileMissing,42000034474,1,61242!syExceptionType,java.lang.Throwable
java.lang.Throwable
     at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:81)
     at intradoc.common.Log.addMessage(Log.java:268)
     at intradoc.common.Log.errorEx2(Log.java:216)
     at intradoc.common.LoggingUtils.logMessage(LoggingUtils.java:97)
     at intradoc.common.SystemUtils.reportErrorEx(SystemUtils.java:462)
     at intradoc.common.SystemUtils.errEx(SystemUtils.java:547)
     at intradoc.common.SystemUtils.err(SystemUtils.java:538)
     at intradoc.indexer.CommonIndexerBulkLoader.handleLoadError(CommonIndexerBulkLoader.java:544)
     at intradoc.indexer.CommonIndexerBulkLoader.loadRecordWebChange(CommonIndexerBulkLoader.java:205)
     at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:309)
     at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:164)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:431)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:340)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
Can anybody tell me what conditions would cause this error?

well yes:
panel.addGLEventListener(new GLR());
"GLR" implements "GLEventListener" and defines the required methods
I installed the Netbeans OpenGL Pack on NetBeans 6.5 and there is a problem with that...mh :(
Ok I also tried to create a GLPanel-Sample-Project and modify it but netbeans don't know "javax.swing.GroupLayout;" I installed the JDK as well.
mh what can i do: try to fix my actual error or try to get GroupLayout in java.swing^^

The maintenance certificate is visible for a system in the SAP Supportporta

Hi Guys,
We are using automatic distribution of maintenance certificates by SAP Solution Manager.
We are ok with prerequisites ( back. jobs , system data , SDCCN jobs etc.) but maintenance certificate is not being applied to the satellite systems.
report RAGS_MK_DISPLAY_FILE does not list down systems and neighter I can see maintenance cert. in SAP support portal.
Can somebody provide hint.
Best Regards,
Tushar

>
TusharC Chavan wrote:
> We are using automatic distribution of maintenance certificates by SAP Solution Manager.
>
> We are ok with prerequisites ( back. jobs , system data , SDCCN jobs etc.) but maintenance certificate is not being applied to the satellite systems.
>
> report RAGS_MK_DISPLAY_FILE does not list down systems and neighter I can see maintenance cert. in SAP support portal.
Hi Tushar,
Have you already checked this SAP Note with hints for trouble shooting?
[SAP Note 1280664 - Distribution of maintenance certificates: Troubleshooting|https://service.sap.com/sap/support/notes/1280664]
General information: http://www.service.sap.com/maintenancecertificate
Report RAGS_MK_DISPLAY_FILE and SAP Support Portal does not show any entries
==> That means, SolMan has not requested successfully Maintenance Certificates.
Hints for trouble shooting:
- check log of job REFRESH_ADMIN_DATA_FROM_SUPPORT
- check whether these SAP Note have been already applied. Both SAP Notes are linked in troubleshooting note.
1293657 - Error in distribution of Maintenance Certificates via SDCCN
1251060 - Error in requirement process of maintenance certificate
Good luck and best regards,
Ruediger

Maintenance Certificate missed in license type

Similar Messages

Maybe you are looking for