Make a blink once at the record if there is an update.

Dear programmer,
Currently, I am writting a JSP page to view a record in the database. Lets say the JSP page will refresh by itself for every 10 seconds. How to make the record in the JSP page to blink once if the administrator updated the record from the admin control panel? The purpose of doing this is to let the customer to know that the record has been currentlt updated and change and customer can able to notice it easily. I had tried <blink>, but it is for netscape only and it blink 'forever' for the record. I just want the record to blink once and not loop.
Can someone tell me this? Thanks.
-Eugene-

An easy solution would be to highlight rows that have changed by setting the font color to red. Since the page will refresh in ten seconds I would use the refresh to reset the font color back to black the next time the JSP gets displayed.
Probably better that a single blink. What if you were not looking at the page when it blinked? you would miss it.
The alternative would be to look into using div/layer tags and javascript to set the div/layer invisible/visible to make it blink.

Similar Messages

  • HT5957 My iphone showed to the settings that there is an update available, so there was a software update  and i did it , but i don;t like this version ,and I want to go back .How can i do it

    My iphone showed to the settings that there is an update available, so there was a software update  and i did it , but i don;t like this version ,and I want to go back .How can i do it

    You cannot go back.

  • OSB DB Poller deleting the record when there is a failure

    Hi All,
    My project consists of below OSB services..
    DB Poller -> Proxy service A -> Proxy service B
    DB Poller is JCA Based and it should delete the polled record after the complete flow is successful. If there is any error in my OSB Proxy services, the record should not be deleted.
    Proxy service A calls Proxy service B using routing(static). My Proxy service B is throwing error and the record is getting deleted.
    If I change to Dynamic routing the record id not getting deleted and the flow works as expected. The routing option configuration is same for both static and dynamic routing.
    The only configuration in my routing option is QOS="Exactly once" .
    Can anyone let me know why the record is deleted if I use static routing?
    Thanks in advance

    In your scenario record will be deleted as your DB Poller will commit the transaction once the message has been delivered to Proxy Service A.
    If you want the message not to be deleted then you must have only the DB Poller proxy include the logic of proxy A and must make a call to proxy B.

  • HT1918 Somehow the country associated with my account was changed to China.  I did not make this change and now the system will not let me update either my credit card information or the country back to the United States.  Help!!!

    Somehow the country associated with my account was changed to China.  I did not make this change.  My credit card information needs to be updated but the system will not let me update either my credit card information or the country back to the United States.  My updated credit card information is not accepted because the country is China.  It will not allow me to change the country until the credit card information is changed. Help!!!

    This exact thing has happened to me. Did you get it resolved? If so, how??

  • Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

    How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

    Hello Beckieor,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    Follow these steps to troubleshoot the above issues:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I have ios 5.1.1 and when I check for updates the phone says there are no updates

    i have ios 5.1.1 and when I check for updates the phone says there are no updates

    Go to Settings > General > Software Update and see if you can update it over the air.

  • Firefox is telling me my yahoo toolbar is not compatible with firefox 4.i have no refresh button or any of the others . will there be an update to make my yahoo toolbar work with this new firefox?

    firefox 4 came on my computer thru an update. now i do not have my yahoo toolbar that has the refresh button the home button and the other buttons that are on yahoo tool bar. i want to use my yahoo toolbar and it says it isnt compatible with firefox 4... HELP!
    fire fox does not have a refesh button it doesnt have a home button so i can access my homepage. i want that back

    As Digital Persona have abandoned it, there will be no update to their extension. It may work with the Fingerfox (SE) extension - https://addons.mozilla.org/firefox/addon/fingerfox-se

  • I'm trying to make a logo animate onto the screen - is there a technique for that?

    I'm editing a TV spot for a client and want to animate their logo, by making it "draw" itself onto the screen. Any recommendations for how to do that?

    depends on how the logo looks like and what kind of 'appearance' you want ...
    drop-dead-simple:
    use any paint.app which supports psd-layers (recommending Pixelmator …), 'split' the diff. elements into separate layers (needs perhaps some retouch) and fade in/move in each layer. (made that for some other request awhile ago : http://youtu.be/uEDjHtADYj8 )
    not-that-complicated:
    in Motion, matte tool, paint some lines, which cover the logo, use the write-on behavior... (thousands of tuts at YT ... )
    all-bells-and-whistles:
    use tools as Blender, Cinema4D or mObjects (=the 3D-plugin for Motion) to re-enact the logo in 3D, flying, tumbling, lens flares, chrome shine, fire balls, Hollywood!

  • I want to sync music from my PowerBook G4 to my Ipod Generation 7 but it says i need to update the Powerbook but the Powerbook says there is no updates plus i need to update Itunes but its not working.

    I want to Sync music from my PowerBook 4 to my Ipod generation 7 but it says I need to update Itunes to 10.7 but when it finishes updating and i go back to itunes nothing has changed and Itunes is not updated.

    In order to install iTunes 10.7 or later you need OSX 10.6.8 or later. A PowerBook can install up to OSX 10.5.8
    I hate to be the bearer of bad news but any new iPod won't sync with iTunes on Mac not using an Intel processor.

  • Just updated iphone4 to ios5, now apps won't open, they blink once but won't run

    After updating to ios5 on my iphone4 I cannot open apps, for instance, facebook, twitter, pandora, etc., when I touch them to open they blink once and the screen returns to normal. Safari and the like operate. ???

    So i guess what's not working is the notification center. I swiped it and saw it but it's not showing the phone call or email that just came in. just the weather update! On my friend's phone who had upgraded she had a little bar across the top that was always there with current notifications. Mine doesn't do that. Any suggestions?

  • What is the Keyboard Shortcut to make a COPYRIGHT Symbol on the iPad?

    What is the Keyboard Shortcut to make a COPYRIGHT Symbol on the iPad?

    There's probably another way but if you enable the Emoji keyboard (settings/general/keyboard/international keyboards/add keyboard/Emoji) then it's available there.
    ©

  • Changing The record in a Standard Table

    Hi,
        I need to change the record which i had entered in the standard table.I can able to delete it by going in to the debugging mode but my question is how to change the record.
    Regards,
    Vijaya Lakshmi

    To update the data of any table, go to transaction SE16N, type u201C&SAP_EDITu201D. It will activate SAP editing function.
    Esle.
    Opern any record in SE16.Double click on the record so that all the fileds will be displayed in vertical format.
    start debugging by /H
    change the value of "code" to "DELE" and execute.
    Moreover if you want to do this in PROD environment, I would NOT use the SE16n way, due to dependencies, which can have unwanted effects (database inconsistencies). Although in this case (only Name of customer), it might not be as bad as it normally would be.

  • Record Management. Search record by objects added into the record

    Hi all,
    We would like to navigate from the gos (generic object service) of a  business object to the record where this object is added. In principle the object will be added just to one record and it will be manually added from the organizer in the specific record. The point is that when someone is at the business object and at the gos press the record button, will navegate to the record.
    Our problem is how without adding any specific field can we know the record where this object was previously manually added.
    Any ideas? I was thinking of updating the attributes of the record (for example reference) after the object is added in the organizer, with the value of the object but I don´t know if there is a exit o service I could use when the object is added, the could give me the value of the object and also how to get the record values in order to update its attributes.
    Apart from this, can anyone tell me, in the definition of a record model, for an object model node, what the relationship  is used for? or where to find documentation, because I hope I could set a relationship with the record and the object that aftewards could be useful for my problem but when clicking there it just appear an screen with Available relationship _ Other objects but I can set any object o parameter and also in a record object I don´t find anything related with this.
    Best regards and thanks for the help

    Dear Pablo,
    Try this...
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0c5d6a5-71f7-2c10-d6ac-c476b82a9c87
    or
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40be7649-72f7-2c10-03b9-c85d56eff2e5
    You can find more cookbooks in here...
    SAP Netweaver Folder Management (ex-Records Management) [original link is broken]
    Best Regards,
    Pragya

  • HT1338 I am trying to open turbo tax 2012.  A box pops up that I don't have the update to be able to open it, however when updates is pulled up it says there are no updates.  I am a novice at this.  Do you know where I can get help?  Thanks

    I am trying to install Turbo tax 2012.  Ihave downloaded it but it says I do not have the correct version to open it.  I am computer illiterate.  When I open updates, the message says there are no updates.  Can you help?  Thanks

    What's the model number of your Lexmark printer?

  • Unable to use the recording port more than once at a ti

    Greets. I'm in a clan that uses Ventrilo for their Battlefield 2 games, and that's all fine and dandy...Love Ventrilo... Though, I am unable to talk in BF2 -and- Ventrilo at the same time. Everyone else in my clan can talk on BF2 and Ventrilo at the same time.Here's some examples so hopefully someone can help:Scenario )When I open Ventrilo first, and launch BF2, all my audio options for microphone are greyed out and set to 0%.Scenario 2)When I open BF2 first and launch Ventrilo, Ventrilo gives me an error about the <SPAN class=highlight>recording port already being in use or something weird like that.Scenario 3)When I open FRAPS first (with <SPAN class=highlight>recording sound enabled), then launch Ventrilo, Ventrilo gives me the same error. Same with BF2 when it comes second, all my options are greyed out.Would installing my sound card for my motherboard work, as long as I set the correct <SPAN class=highlight>recording device? I don't want to do that, because I want to use my SB Li've! instead. Does anyone have the same problem?
    Here is my DxDiag info:
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
    -------------Sound Devices------------- Description: SB Li've! Audio [D000] Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: PCI\VEN_02&DEV_0002&SUBSYS_00A02&REV_0A Manufacturer ID: Product ID: 00 Type: WDM Driver Name: ctaud2k.sys Driver Version: 5.2.000.0296 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 9/8/2003 9:47:22, 496800 bytes Other Files: Driver Provider: Creative HW Accel Level: Standard Cap Flags: 0x0 Min/Max Sample Rate: 0, 0Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, NoSensaura(tm) ZoomFX(tm): No Registry: OK Sound Test Result: Not run
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
    Earlier this afternoon, I started a cleansweep of my entire system with entries in the registry pointing to anything having to do with SB Li've!. I've got rid of -everything- except for one thing that's really bugging me:In the Control Panel, there's an AudioHQ icon, and when I double-click it, nothing happens... I don't know how to get rid of control panel icons, but considering that's still in there, makes me wonder if there is still something lingering from my last installation.
    Now, you're all going to laugh at me for this one, but I've been through two major upgrades (mobo, CPU, sound card, etc.) without formatting. I've been meaning to do this, but I hate formatting, because then it takes like a week to get the computer running the way you want it to.
    While uninstalling all my sound drivers, I decided to go into the add remove programs to uninstall some old crap I never used. I saw two enries....BF2, and BF2 demo... Thinking of how I don't play the demo anymore, I will uninstall the demo- 'cept it uninstalled the entire BF2 retail game. Sooooo.....My way to test this isn't even installed, but it seems to be working all right when I launch FRAPS and Ventrilo at the same time.
    But then it started to get strange...
    When prompted at Windows startup to install new hardware, I had inserted the SB Li've! driver disk and tried to run setup.exe - It says:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>So, on the New Hardware Installation, I had it automatically search for the drivers by CD-ROM, and it found them in the Drivers/audio/win2k folder (Running Windows 2K SP 4), and seemed to install them just fine. After they installed, I heard some sound, thinking everything went smoothly.Now I try to install the upgraded drivers I downloaded from Creative's website:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>So I check out my device manager:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/devicemanager.gif" border=0>Thinking I was able to run FRAPS and Ventrilo at the same time, I tried to load Battlefield 2 and Ventrilo at the same time and got this error:
    <IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/input.gif" border=0>
    So I knew it was hopeless.
    Then I popped in the SB Li've! CD again and it auto-loaded with the driver installation program, and I selected the typical installation, thinking I may have missed something doing a custom in the past.
    Now my device manager shows:
    - Creative Game Port
    - Creative SB Li've! series
    But, it gets strange again. After installing the factory drivers from the CD and then trying to install the updated drivers from Creative's website, I get the same error I got above:
    <IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>
    At this point, I am extremely stuck. Every one of my friends can play Battlefield 2 and have Ventrilo loaded at the same time, and still be able to talk through each program's independent voice over IP.
    Is my sound card even able to do such a thing?Message Edited by Jaldarith on 08-23-2005 05:37 PM

    Just checked the model of card youre using by Hardware ID
    PCI\VEN_02&DEV_0002&SUBSYS_00A02&REV_0A = SB0220 SBLi've! 5. Digital,
    and I think if this is correct, you'll may find some other frustrationed owners asking the
    same question you have.
    Have you tried these drivers
    and/or
    these drivers
    About this issue you and the others are having:
    [url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=4670" target=_blank>See this thread[/url]
    BTW:
    You perhaps can install Audigy 2 drivers and software to your card. Here are the instructions how to do it.
    It's quite easy process. Download Audigy driver/software package (~20MB) (link is there), extract it into some directory. Download the patch (link is on Automatic Method sentence)and follow instructions how to patch the instalation package. Then installation process. I've modded my Audigy 2 to Audigy 2 Zs using a similiar method and everyting else, but GraphicMixer, works great.
    .jtpMessage Edited by jutapa on 08-24-2005 06:38 AM

Maybe you are looking for