Make a parameter mandatory when you choose a particular value from pameter2

Hello,
How do I make a parameter mandatory in sql script?
I have 2 optional parameters:
1) parameter1 (&1)
2) parameter2 (&2)
parameter1 has 4 values:
1) East
2) West
3) North
4) South
paramete2 has 3 values:
1) 123
2) 456
3) 789
when I choose a value (North) from parameter1 the parameter2 has to become mandotory. If i choose any values from parameter1 other than North, parameter2 should be optional.
Any help would be greatly appreciated.
Thank you

We do not currently support mandatory parameters in the standalone release. Its in the works thou
tim

Similar Messages

How do you choose a particular Channel from an Advise.vi to perform an Array Max & Min.vi on that particular channel only?

Reading all the channels for a FP-AI-100 through an Advise.vi but I need to read the Max & Min from channels 0 & 1. How is this done?
Thanks

The easiest way is to use two copies of the Index Array function. You would wire the output from FP Advise.vi to the n-dimension array input of both Index Array functions. For channel 0, you would use the an index value of 0 (on the first Index Array) and for channel 1, you would use an index value of 1 (on the second Index Array). Alternatively, the Index Array function is what is called a growable array function, you can drag the bottom of the node downwards, adding outputs. In this case, you can set it for two outputs and only use one copy of the Index Array.
Considering that you are relatively new to FieldPoint and LabVIEW, I recommend that you consider using the FP Read.vi instead of the FP Advise.vi. The FP Advise.vi is a more advanced version of the
FP Read.vi and has more "gotcha's" in its use. To save yourself some debugging headaches it may be easier to use the FP Read.vi. The single biggest difference in coding between the two is that an FP Advise.vi in a loop, automatically times the loop, whereas an FP Read.vi in a loop requires a timer such as Wait Until Next ms Multiple.vi.
Regards,
Aaron

Photoshop CS5 crashes when you choose menu items when FinderPop is installed (Mac OS)

FYI - Knowledge Base document was created to outline this problem and provide a solution:
Photoshop CS5 crashes when you choose menu items when FinderPop is installed (Mac OS)
http://kb2.adobe.com/cps/891/cpsid_89140.html

FinderPop released a new updated version today. It can be found at the below link. Adobe makes no promises about 3rd party software, however my limited testing does indicate that the crash on inverse selection is fixed by this latest beta drop of FinderPop.
2.3.0.6
http://www.fnarr.net/fp/viewforum.php?f=3

Setting up iCloud when you choose do not use icloud

How do you activTe iCloud when you choose do not use iCloud on last iOS update

Follow: http://www.apple.com/icloud/setup/

HT2736 How long until a redemption code appears when you choose now to send the gift?

How long does a gift code appear when you choose now to send it?

In a real time.

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

HT1535 What all gets erased when you choose to manually manage your music?

I got a new laptop not long ago and I currently have the newest version of iTunes installed on it. I also just got the iPhone 5 so I wanted to put more (new) music on it that did not upload with iCloud. Except I want to manually manage my music as opposed to automatically syncing. When I choose the option to manually manage, it says that everything will be erased from my iPhone. Can someone just clarify what exactly will be erased, is it just my music and apps or is it basically everything on my phone as if its gettign restored to its factory settings?
Thanks

Hi, welcome to Apple Discussions.
Unlike most of Apple's iPod devices, the iPhone is resticted to holding content from a single library, even when manually managing that content. If a particular file isn't in the local iTunes library when you update the device (e.g. add or remove a single track) it will be deleted. This makes any potential benefit of manual management pointless. Since this restiction is imposed by iTunes you may prefer to look at 3rd party tools to manage media content on your iPhone. Alternatively stick your library on an extenal drive so that you can manage it from any computer avaiable to you.
tt2

How to make table cells mandatory when visible

I have a form with two hidden subforms. Each subform contains a table with fields that need to be mandatory when visible.
The subforms are hidden or revealed based on a selection from a drop-down list.
I found the below script which works great for making a text field mandatory when visible, but, how do you apply this to cells in a table?
I can't figure it out.
if ("RMC-Fort Lupton-FIRE-DOT" == xfa.event.newText)
    Table.FL.presence = "visible";
    Table.FL.TextField1.mandatory ="error";
else
    Table.FL.presence = "hidden";
    Table.FL.TextField1.mandatory ="disabled";
if ("RMC-Ault-FIRE-DOT" == xfa.event.newText)
    Table.ALT.presence = "visible";
    Table.ALT.TextField2.mandatory ="error";
else
    Table.ALT.presence = "hidden";
    Table.ALT.TextField2.mandatory ="disabled";
Thanks in advance!

Hi Bibhu,
Thanks for responding.
Here is the table structure. Rows 1 through 25 are all the same. Each row has two cells with Radio Buttons named "AsFound" and "AsLeft." Both need to be mandatory when visible. If you need more information, let me know.
Thanks!
Kurt

Why preferences make a grafical bug when you close it?

[http://screencast.com/t/mosz2dXev Here can you see a video of the problem]
I have tried to disable all addons, but it did not help.

There are two reasons this happens.
1. The file is damaged, or (more often) made slightly wrong by bad software (more common than you'd think). Adobe Reader repairs the file, and wants you to save the repaired file. (If you do, the message won't be repeated)
2. The file does some clever stuff with forms when you open it, and changes the file. Again Adobe Reader wants to save it. (Even if you do, the same thing could happen next time).
If you didn't make the file you can safely ignore this.

When you choose the Send Later option, where does the email go?

I wrote an email this morning which I did not want to send right away so I chose the Send Later option under the File menu. The email disappeared and now that I want to send it - I can't find it. It's not in drafts or anyplace else for that matter...

'''Local Folders|Outbox'''
But when you start or close Thunderbird it should remind you and offer to send them…
And your '''File '''menu entry should have an option to send unsent mail.
I have '''File|Send Unsent Messages''' here.

How to set a field as mandatory when another field contains specific values

Hi SAP Experts,
Is it possible to set the Plant Specific Material Status field as mandatory when the DChain-spec. status field contains a specific set of values? Thanks.
Regards,
Kim Yong

Hi Kim,
I think you can achieve this using the validation tab in the field.Add a new rule for validation select the condition as test and in the value you have use formula according to your senario.Select the 'Stop execution'.This will make the field mandatory.
I hope this helps...
Naga

Photoshop CS3 doesn't open or error occurs, when you Edit in Photoshop CS3 from Photoshop Lightroom 2

Problem: When you try to Edit in Photoshop CS3 from Adobe Photoshop Lightroom 2, Photoshop CS3 doesn't open, or after Photoshop opens, you see the error message, "Photoshop could not be launched".
This issue is currently being investigated. At present, there are two possible areas that might be causing this issue. Corrupted metadata or a corrupted catalog, or Photoshop CS3 has not been updated to 10.0.1, or the update did not apply correctly to the application.
We are working for a permanent solution for this issue.
Workaround: Please refer to this Adobe
TechNote for further information.

Quote
"FIX IT OR SEND ME MY MONEY BACK NOW!!!!"
This is a user to user forum, there is no one here to make a refund. Who are you SHOUTING at!!

How to make a report to display next 18 months of data with when user select a particular month from the filter in power pivot tabular model.

Hi,
i have a dimension table with month_key having values (201201,201202,201203.......202011,202012) and month name ( Jan 12, feb 12,......NOV 20, Dec 20) and a fact table with columns (month_key ,measure_types, Amount)
My requirement is to create a power pivot report in which when a user select a month from the filter, the report should display the (selected month+18 ) month's data against each type . when JAN 12 is selected ,the jan 2012 +18 = june 2013
, month name should be populated with months till june 2013 only .
i tried creating calculated column"END DATE " in the fact table with dax expression to calculate the 18th monh from the current month as below
month_key END DATE
201201       201306
201202       201307
and thought of filtering the table with month key <= ENDDATE but it is not working as expected. could you please guide me on this ? Is there any time intelligence function that serve the purpose . Iam using excel 2010
..hence could not do any calculation on the report side also. please suggest .
Thanks in advance

Do you need to show the measure calculated for those 18 months as a total on 1 row, or do you need to select a single month and then display on row filters 18 distinct rows?
The first is trivial as driezl has suggested.
The second will require a second calendar table.
I created this example workbook for a coworker who had a similar problem. You will have to use the disconnected table as your filter and pull your related table onto the rows.
Finally, the easiest way to deal with the sort of date arithmetic you need to do is to restructure your date table to have a series of "Sequential" fields. These fields should be the number of units of time since the beginning of your calendar.
For example, consider a calendar starting on January 1, 2010. For January - December 2010, [MonthSequential] = 1, 2, ..., 12. For January - December 2011, [MonthSequential] = 13, 14, ..., 24, and so on, incrementing by 1 for each sequential month in time.
Assuming you have this set up in your date tables (one related to your model - DimDate - and one disconnected - DisconDimDate) your measure would look like this:
18 Month Measure:=
CALCULATE( [Measure]
, FILTER( DimDate
, DimDate[MonthSequential] >= MAX( DisconDimDate[MonthSequential] )
&& DimDate[MonthSequential] <= MAX( DisconDimDate[MonthSequential] ) + 18
Please review this example along with the workbook I have linked above.

HT4528 Is it possible to buy an iphone for yourself at the apple store when you're using an upgrade from a different phone number on your plan?

I broke my old phone a few days ago, and my phone number doesn't have an upgrade until the summer of next year. My dad offered me his upgrade, since he doesn't need a new phone and it would save me a few hundred dollars. Is it possible for me to go into the Apple store and purchase a new iPhone when I'm using an upgrade from a different phone number? I already cleared it over with the people at Verizon, who told me I could switch the upgrade over online.

There are 2 issues here.
Some carriers REQUIRE a data plan in order to use an iPhone on their network. This requirement will vary from carrier to carrier. The iPhone is designed to be constantly connected. If you do not manually go in and turn off cellular data (not just 3G) The phone will attempt to connect to the Internet over the cellular data network. If you have your carrier specifically block these requests, you shouldn't be charged for them. If not, it could end up costing you lots of money you didn't expect. The other thing that will happen is things like visual voicemail will not work (if the carrier supports it to begin with) and you will get lots of messages about not being able to connect to cellular data if you're not in range of WiFi you can connect to. MMS messaging also will not work.
The second issue surrounds the statement: "use the iphone 4 with a standard cdma phone plan".
It is NOT possible to purchase an unlocked CDMA iPhone. ALL CDMA iPhones are locked to Verizon.

HT4993 When you switch to an iPhone from an old phone can you transfer your voicemail message?

I want to switch to an new iPhone but I don't want to lose my recorded voicemail message. Is this possible to transfer?

If Sprint's system works the same as Verizon's, your old voicemail account is deleted when you switch to an iPhone. That includes any saved voicemails. You may be able to send them, from within the voicemail system, to someone else. Verizon also works with another vendor which will archive your messages for you. Check with Sprint to see if they do something similar.

Make a parameter mandatory when you choose a particular value from pameter2

Similar Messages

Maybe you are looking for