Make changes in DME file in Transaction F111

Hi Friends,
I have to make changes in DME file in Transaction F111.
Friend please help with some user exit or event module with some some info.
Thanks in Advance,
Best Regards

Hi,
That is aspecial character you need to remove this special character before you pass this data to BDC....
data: lv_char type x value '0D'.
do.
   if view_fields-value cs lv_char.
     replace lv_char with space into view_fields-value.
     condense view_fields-value.
     modify view_fields index lv_index transporting value.
   else.
     exit.
   endif.
enddo.
here you might have to replace 0D with the correct value whihc you can see in dbug mode by clicking on the hex display button also try with '09 in place of 0D.
Regards,
Himanshu

Similar Messages

Making changes in DME File TCode F111

Hi Friends,
I have to make changes in DME file in Transaction F111.
Friend please help with some user exit or event module with some some info.
Thanks in Advance,
Best Regards

Give yourself write access to the enclosing folder in that folder's Get Info window.
(59544)

Change the DMEE file properties

Hi Guys,
We need to make some changes to the DMEE file properties as below :
We need to make sure that FPAYH-DOC1R is listed in sorting at level 1.Actually the issue is that , even the payment exceptions are being captured in the DMEE file that is being downloaded.
We need to eliminate these exceptional items from being captured in the DMEE file that is getting downloaded. Actually , we are capturing the DMEE file after the payment proposal stage. At this stage, the exception items are being captured in the DMEE file which is not correct. We want to eliminate these exceptional items from the file.
Can you please suggest if this would eliminate the exception items from the file and also can you please let me know , where i can change the DMEE file properties.
Thanks for your suggestions .
Regards,
Srikanth .

Goto transaction DMEE, select your DME tree, goto DME Tree properties, goto tab "Sort/key fields".
Also check levels. Insert field DOC1R in Sort/key field at appropriate level (usually level 3).
Alternately you can also go to DMEE tree through FBZP. Select payment method in country and click on payment medium format setting, then DME Engine.

Why is the version file smaller than the original file, although I didn't make changes in the file? And why is the keywords don't exporting with original files?

Hi! Why is the version file smaller than the original file, although I didn't make changes in the file? And why is the keywords don't exporting with original files?

Wild guess: you're using the the wrong export settings. You'll need to tell us more before we can help you - like the export settings you're usng, the size and format of the originals etc.

You don't have permission to make changes to that file.

I have recently reinstalled iWeb from a time machine backup due to the fact that I had to re install Leopard, I can get my old website to load but when I make changes I get the following message when I try to save it: +You don’t have permission to make changes to that file.+
I have set all the permissions to Read & Write for all the users but it still will not work, any ideas please.
I have also done repair permissions etc

I'm having the same problems. I can't find the iWeb.plist file anywhere. I deleted the iLife.plist file in case it was there, but I still can't edit my website. This website was made on my computer, but under a different login name. I copied the file to another login name and that's where I'm trying to publish my website from. It keeps telling me that I don't have permission to edit. Anymore thoughts. Thanks anyone.

SAVE FAILED. You don't have permission to make changes on that file.

I have copied the domain file from one machine to edit the website from another machine. The editing job can be done without hassle. When I try to publish the we site from the machine where I have imported the domain file appear the message:
SAVE FAILED. You don't have permission to make changes on that file.
What's wrong ??
After 2 minutes appears another window: Your domain has been published...

And how did you copy it over?
Depending on how the file was brought over, it may still have permissions set from the prior volume (I had this problem with iPhoto libraries). It's able to create the web content from the live document, but unable to save the changes to the domain.sites file.
You can try running "repair permissions" with Disk Utility in your Utilities folder to see if that helps.

Why do most of my stacks come ungrouped when I make changes to other files in the same folder?

I have a folder of about 3000 graphics and photos that I use for work. I've meticulously organized them all by using unique file names, keywords, and sorting. However, when I make changes to a set of files (especially using the batch rename tool), a large percentage, even a majority, of the other stacks in the folder come ungrouped.
This has been happening to me for several months, and so far I can't see any type of order or factor that makes certain files come ungrouped. Many times, it's the same files that come ungrouped, but in addition to those, there will be other random stacks that I lose. My stacks are only a few files big (each stack is comprised of the same picture in different file types) and with how many files I have, this has become seriously detrimental to my workflow and efficiency. Anywhere from 20-70 stacks will become ungrouped. I almost always have my files sorted by filename, and when I rename files using batch rename, I give them such similar names that I'd think there would be no reason for the rest of my files to come ungrouped. For example, if there are three files I want to group, I will give them a name like background_001, background_002, and background_003. After I do this, I'll discover that my stacks with names like template_(sequence number) and UI_(sequence number) have come ungrouped. It will do this with pages and pages of stacks at the same time, regardless of how I have the files / stacks sorted. It doesn't happen everytime I rename a batch, either. I just created 10 batches of 3 like-named files each, and after this last batch, about a hundred files came ungrouped.
I understand that doing things like changing the sorting method of files, or renaming a file so that it's thrown in the middle of a stack, will ungroup my stacks. I don't think I'm doing any of these things (I've been trying desperately to make sure I don't change the sorting method of my files or do anything to a file that might have an effect like this). I don't use ratings or color labels in these folders, the only tools I use are batch rename, keywords, and stacks.
Is there any way to preserve my stacks so this stops happening in the future, or I can correct it when it does?

This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

How to make changes to .fmx file using the form builder

Hi all
I have a .fmx form in the AR_TOP directory of the Oracle E-business suite.Now I need to make some changes to the form and compile it and place it back .But the .fmx file didnot open using the form builder 6i .So is there any way that i can convert the .fmx to .fmb so that I can open the form using the Form builder 6i??
I have the toad s/w installed but I dont know how to open the form using the Toad.
Thanks

I have a .fmx formYou cannot open a fmx-file with any developer tool. To make changes to the source-code you need the fmb-file and open it witj Forms-builder
AR_TOP -directory of the Oracle E-business suiteBe careful when changing source-code in the ebusiness-suite. If its a module from oracle i don't if its supported if you do changes in it.
I have the toad s/w installed but I dont know how to open the form using the Toad.Toad is definitely the wrong tool for forms-modules.

'Finder wants to make changes' when copying files between two Macs

Hey all,
I've read a few versions of this problem on the forums here but haven't tracked down a solution.
I have two Macs on the same network – I recently got a second-hand Mac Pro, and my Macbook Air. The computers are both on the network and can browse their respective folders and the like, but when I go to copy or sync files between the computers, I get a file permission issue.
Finder on either computer prompts: 'Finder wants to make changes. Enter your password'. At the same time a corrupted version of the file copies to the other computer but with 0 bytes that doesn't open...
Has anyone solved this issue before – it'd be greatly appreciated to hear any approaches!

On the laptop I got 513
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Make changes in text file.

Hi all,
we are uplaoding a text file by bdc but when we are importing our text file from some other system we are getting some box type symbol in that text file , how to delete those boxes before uploading it to sap
plz help
regards
sarabjit

Hi,
That is aspecial character you need to remove this special character before you pass this data to BDC....
data: lv_char type x value '0D'.
do.
   if view_fields-value cs lv_char.
     replace lv_char with space into view_fields-value.
     condense view_fields-value.
     modify view_fields index lv_index transporting value.
   else.
     exit.
   endif.
enddo.
here you might have to replace 0D with the correct value whihc you can see in dbug mode by clicking on the hex display button also try with '09 in place of 0D.
Regards,
Himanshu

Reg DMEE file format

Dear experts,
My requirement is that i have to change the DMEE file format for format tree GB_BACS according to user requirement. I have copied to ZGB_BACS and trying to change it according to user requirement. But when the functional trying to attach ZGB_BACS to configuration, it is throwing an error stating it is not updated in table. Can anyone help me in achieving this.
tks in advance

Stephen,
I'm sure you're trying various alternatives with your mentioned transaction, but in the documentation, I find reference to DME, and here's what it says.
DME
Data medium exchange in this case involves the creation of a file which corresponds to the rules of the credit institution in question for automatic payment transactions and which contains all the necessary payment information.
The information relevant for the payment medium (file format, creation data, payment amount in local currency, payment documents involved etc.) are stored in the system and can be called up via the DME manager.
Other functions of the DME manager are:
- Downloading the file into your local (PC) file system
- Displaying and printing the file contents
- Generating a payment summary for the data medium
I would strongly suggest putting as many parameters as you know while trying to extract an output from this program.
If things still don't work, have a look at T.Code PC00_M99_FPAYM. The Easy Access path is HR --> Payroll --> Europe --> Great Britain --> Payroll --> Bank Transfer
Just in case you haven't looked here, there are a bunch of other programs here that might turn out to be useful to you.
If you have, and tried & discarded all of these, I guess a custom development is your only way out.
Regards
Gulshan

How do I make changes to an external drive connected to my Mac mini from my Windows 7 PC

I have an external drive which I learned had to be FAT32 for the read write option to be set in the Mac Mini. I did that and moved all the media files back on the external HDD. On the Mac Mini, I shared the 4 folders I needed (Ebooks, Movies, TV Shows, and Transfer). Also on the Mac, I added a user account "Ephraim" because that is the login I have for the WIN7. No Passwords are used right now. The current login being used on the mac is "Media". With the change to FAT32 I have set the permissions on the MAC to Read/ Write for Everybody. Everything listed shows read/write. From the WIN 7 "Ephraim" login, I mapped drives for every folder on Mac external. So, "TV Shows" is drive letter Z:. I can access all the folders/drives to view the files but, still get an error when attempting to change a name or move a file. "You need permission to perform this action. You require permission from the Computer's administrator to make changes to this file". On the Mac and the PC, the user accounts "Media" and "Ephraim" are set to administrator. SMB and AFP are selected under options. Under Get info, permissions show read write. I created a media login on the PC but could not see the mac mini at all. FYI the Mac mini is connected via ethernet.

In addition, I just realized I can make changes to sub folder names and move sub folders in to other sub folders. For Example: I have "Dexter" folder and Sub folders named "Season 1" and "Season 2". I move "Dexter Season 3" into "Dexter" folder, and I change the name to "Season 3". That can be done but I still cannot move a video file from an existing folder or change video file name itself. For example: I cant move a movie file from a sub folder to Gen Pop of the Movie folder, or change the name to my format. I want all files under movies with no other folders present, and I want the name to follow a format (Name Year Ex: "Flight 2012"). I have the mac mini in the living room and need to be able to make changes or additions from my desk, so as to not disturb people who are watching Cable TV by changing the input to work on the Mac files.

ERROR: You require permission from ************* to make changes...

I've read the previous entries on this problem which describe changing ownership of the file/directory/whatever. I've done all of that and it seems to be correct because I show up in the <Properties> box as <Owner>.
But the message I get about requiring permission tells me that I have to have permission from *myself* - that's hard to figure out.
I'm logged on to my administrator: machinename/user and that's the name I changed ownership to. Yet I get the error: "You require permission from machinename/use to make changes to this file."
So now what? I'm stumped
TIA
Aboonah

Aboonah,
There are standard permissions set to drives when Windows is installed. Usually the account created is given the same permissions as the standard Windows Administrator, which would explain why you could modify and delete about 3 months ago. Apparently something
happened along the way. Here are the two things that I would try.
1. Open up my computer --> Right-click the C: drive --> Click properties --> click the security tab --> Select Users (should be computername\Users) --> Make sure full control is enabled, if it isn't then Edit the permissions to allow full
control. (If for some reason it isn't enabled you may have to log in under the administrators account to make any changes)
NOTE: You might want to check the administrators permissions as well to see if they have full control, AFAIK you can't reduce their permissions, but I may be wrong there.
2. Click Start --> Right Click computer --> select manage --> Expand the Local Users and Groups --> Click the Groups folder --> Double Click Administrators --> Check to see if the computer name is listed under the administrators group -->
if it isn't then add it.
Let me know the results.
EDIT: Is this PC on a domain?

How can I change the policy file?

I have designed an applet to read a file from the local Machine.
This applet thro a servlet reads the contents of the file specified.
I use Tomcat 4.1.12 server and this is an client-server application.
To read the file in the local machine, I set the permission as follows in the .java.policy file in the Local Machine.
grant codeBase "http://MyMachine:8080/Example" {
permission java.io.FilePermission "<<ALL FILES>>", "read, write, delete, execute";
as the applet file is in the Example of the server "MyMachine".
Its working and my applet is able to read the file from the local machine it runs.
Now my problem is I cannot set/change the policy file in every machine where my applet runs.
Instead if there is a way to change the policy when the applet downloads,that'll be effective.
That is I donot want to go and change the policy file manually in each and every machine where my applet runs(I donot even know which are the machines going to run the applet).
Is there any means to acheieve my need?
Please explain me in detail or direct me to the relevent web sites or links.
Thank you

Hi Hosuke,
I had the same problem, thanks for the advise.
Still I have a remark to make.
The thing is that, in order for the applet to have the permission granted (for whatever), you need to have a policy file which you can include in the JAR file (like you explained before) AND also you need to add an entry in the java.security file (located for me: "C:\Program Files\Java\j2re1.4.1_01\lib\security\java.security") that tells the applet where to find all the .policy files.
Something like: policy.url.4=file:/c:/java.policy
But since we are talking about an applet we are not able to make changes to this file.
Maybe you or anyone else knows a workaround for this problem.
Thanks in advance,
Ronald Vromans.

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

Make changes in DME file in Transaction F111

Similar Messages

Maybe you are looking for