Make Select for another table in HTML Client

Hi,
I need to make a Select first row from another table in html client and then, put value in one field of my screen. How can do it ?
I have table Orders with field Order ID, CustomerID, Telephone , but telephone is not in CusomerTable .
I Have a Query on table Telefonos named telefonos de cliente, and then linked in Screen this query with CustomerID .
I need to select from this table, or directly from the telefonos table, the first value.
Thanks!

Thanx, but while compiling it says:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
REP-0749: After form trigger cannot reference a report column.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Similar Messages

How to populate a table based on a row selection from another table.

Hi, i just started to use ADF BC and Faces. Could some one help me or point me a solution on the following scenario .
By using a search component , a table is being displayed as a search result. If i select any row in the resulted table , i need to populate an another table at the bottom of the same page from another view. These two tables are related by primary key . May i know how to populate a table based on a row selection from another table. Thanks
ganesh

I understand your requirement and the tutorial doesn't talk about Association between the views so that you can create a Master-Detail or in DB parlance, a Parent-Child relationship.
I will assume that we are dealing with two entities here: Department and Employees where a particular Department has many Employees and hence a Parent-Child relationship.
Firstly, you need to create an Association between the two Entities - Department and Employees. You can do that by right clicking on the model's entity and then associating the two entities with the appropriate key say, DepartmentId.
Once you have done that, you need to link the two entities in the View section with this Association that you created. Then go to AppModule and make sure that in the Available View Objects: 'EmployeesView' appears under 'DepartmentView' as "EmployeesView via <link you created>". Shuttle the 'DepartmentView' to the right, Data Model and then shuttle
"EmployeesView via <link you created>" to the right, Data Model under 'DepartmentView'.
This will then be reflected in your Data Controls. After that, you simply would have to drag this View into your page as a Master-Detail form...and then when you run this page, any row selected in the Master table, would display the data in the Detail table.
Also, refer to this link: [Master-Detail|http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html]
Hope this helps.

How to dynamically display the data from a table base on row selection of another table in ADF

Hi ,
I have a requirement in ADF. I need to change the data of a table based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                     For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
My method is following
    public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
"Definition DepartmentId of type Variable is not found in EmployeesView1."
I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
Thanks
Nilesh

Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
However, if both tables are on the same page; using your hack about;
On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
I would bind table two to a RichTable component:
RichTable t2;
public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
               refreshTable2(pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
private void refreshTable2(Number pallet){
RichTable x=getT2();
CollectionModel cm=(CollectionModel)x.getValue();
JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
ViewObject vo =dciter.getViewObject();
ViewCriteriaManager vcm=vo.getViewCriteriaManager();
ViewCriteria vc=vcm.getViewCriteria("listById");
vo.applyViewCriteria(vc);
vo.setNamedWhereClauseParam("DepartmentId",pallet);
vo.executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

Make select for each row - another solution?

For example I have a function with day before selection:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
function ABS return boolean is
ret number(10,2);
begin
for sab in (select saldod from ndv_ccli, nd_clientes where
(:p_dtvenc-dtdoc) = (select min(:p_dtvenc-dtdoc) from ndv_ccli, nd_clientes
where (:p_dtvenc-dtdoc>0)and
ndv_ccli.cod_cli = cod_cli) and
ndv_ccli.cod_cli = cod_cli order by dtdoc desc,cddb )
loop
ret := sab.saldod;
end loop;
return (ret);
end;
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
In report I use the value of this function(a) in another function(b) to sum with few values.
Output of function(b) has a lot of rows and for each row it makes select in function(a) to find the value, but actualy it is the same. Is it possible to do this select only one time and then put in function(b) only it's value? Because it makes report too slow...
tnx before

Thanx, but while compiling it says:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
REP-0749: After form trigger cannot reference a report column.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

ODBC 10.2 client makes SELECT FOR UPDATE run slower

Hi all,
I'm facing a strange problem with Oracle OBDC: I got an application which needs to connect to an Oracle DB via odbc.
Server is a 10.2.0.1; if I connect using ODBC driver installed by Oracle 8 client everything is ok but if I use ODBC driver installed by Oracle 10 client or Oracle XE client SELECT FOR UPDATE statements become really slower.
My application always does the same statement:
SELECT list_of_fields
FROM table
WHERE primary_key =
AND ...
FOR UPDATE;
If I use the Oracle 8 ODBC, this select is almost immediate; but if I use Oracle 10 ODBC it tooks ~4 seconds.
The statement is identical, so the access plan must be the same.
The ODBC configuration is identical too; tnsnames.ora entries are the same.
So, why the 10x clients are slower?
thanks for every answer
andrea
Message was edited by:
user585511
Message was edited by:
user585511

Which cursor library are you using? The ODBC Driver Manager's cursor library strips off the FOR UPDATE silently (see Appendix F of the ODBC Programmer's Reference). Depending on what version of the "Oracle 8 client" you were using, there may not have been an ODBC driver cursor library, so you may have been forced to use the driver manager's. Potentially, the slowdown is that you're now actually locking the rows now and may be running some contention issues.
It would be worthwhile to trace the sessions and see what the difference in waits is.
Justin

Select for partitioned table, will this work with sign?

Hi,
I have partitioned table and select for it like :
PARTITION BY RANGE ( "INDATE" )
(   PARTITION "PRT_20091201" VALUES LESS THAN (TO_DATE(' 2009-12-02 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')...
   SELECT COLUMN_LIST FROM TABLE1   WHERE
           ( indate >= to_date(t_indate || t_timefrom, 'mm/dd/yyyy HH24:MI:SS'))                       AND
           ( indate <= to_date(t_indate || t_timeto,   'mm/dd/yyyy HH24:MI:SS'))                        AND... so selecting all info for the given date withing specifiied time period, and I'm using >= condition on partitioned column, do you think it will work correctly getting directly to the single partition, or Oralce requires me put strictly = sign for that column, and then additioanly I can probably select time period, something like:
SELECT COLUMN_LIST FROM TABLE1   WHERE
          ( indate = to_date(t_indate , 'mm/dd/yyyy'))                        AND
               ( trim_to_time(indate) >= to_char(t_timefrom, ' HH24:MI:SS'))              AND
               ( trim_to_time(indate) <= to_char( t_timeto,   ' HH24:MI:SS'))              AND... Tx all
Tr

trento wrote:
Hi,
I have partitioned table and select for it like :
PARTITION BY RANGE ( "INDATE" )
(   PARTITION "PRT_20091201" VALUES LESS THAN (TO_DATE(' 2009-12-02 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')...
SELECT COLUMN_LIST FROM TABLE1   WHERE
( indate >= to_date(t_indate || t_timefrom, 'mm/dd/yyyy HH24:MI:SS'))                       AND
( indate <= to_date(t_indate || t_timeto,   'mm/dd/yyyy HH24:MI:SS'))                        AND... so selecting all info for the given date withing specifiied time period, and I'm using >= condition on partitioned column, do you think it will work correctly getting directly to the single partition, or Oralce requires me put strictly = sign for that column, and then additioanly I can probably select time period, something like:
SELECT COLUMN_LIST FROM TABLE1   WHERE
( indate = to_date(t_indate , 'mm/dd/yyyy'))                        AND
( trim_to_time(indate) >= to_char(t_timefrom, ' HH24:MI:SS'))              AND
( trim_to_time(indate) <= to_char( t_timeto,   ' HH24:MI:SS'))              AND... Tx all
TrI agree with David that the first example looked okay, but you should test to make sure. You can check individual partition contents by executing a query using the PARTITION option to specifiy a specific partition to check the values there.

How to implement line selectability for a table control using table Wizard?

Hello SDN Community,
I have created a table control using the Table Wizard. I found my exact question in this forum, but unfortunately it had not been andsered. While I cannot paste a screen-print into this plane-text area, here are the steps I followed...
1) SE51
2) Create new screen 0100
3) Click Layout button
4) Clidk Table Control (with Wizard) and draw box on canvas.
5) Step is "Start" - click Continue
6) Step is "Name of Table Control" - provided name
7) Step is "Table Name" - provided name of dictionary table (AUFK)
8) Step is "Definition of Columns" - selected order numver and order text
9) Step is "Table Control Attributes" - Line Selectability is in display mode - cannot set it.
I would like to have a selectability column for my table. Would appreciate any insight into how to do this.
Thank you,
Dean Atteberry.

This is a puzzling...
For the table control wizard, in the Table Control Attributes step, I was able to get line selectability to open up by declaring a char01 data element at the beginning of my type.
The puzzling is in regards to the "Selection col. fld" entry field.
If I leave it blank and try to go to the next step, I get message "Enter the name of the selection column if you are using a program table"
So it looked like it wanted to know the name of my selection column. So I type in "CHAR1". and got the message "The field "CHAR1" for the selection column is already contained in the table."
Hmmmmm.... don't understand............
Dean Atteberry.

HOw to improve insert/update/select for nested table.

Hi All,
I think this is my second thread for nested table.
i just want to know what are the different ways available to improve the insert/update/select operation on Nested table.
Thanks in advance.

By not using a nested table for data storage in the first place...
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:8135488196597
Perhaps Parallel Query/DML might give some relief.

Select * for multiple tables in cfquery does not work anymore as it used to with CF5

I am migrating from CF5. the following code used to work:
SELECT *
FROM tablea a, tableb b
where a.id =b.id
now I get an error when getting the value of ID (error:
queryname.ID undefined). I suspect the * is the problem and is not
permitted in that format with CF 7.
Any help will be appreciated
Thanks

cfdump is, for the most part, a debugging tool which allows
you to look at varialbes and their values at various points of the
template. Rarely would you want to let real users see that sort of
output.
I'd be suspicious if adding cfdump, and nothing else solved
the problem. I also wouldn't rely on it as a permanent solution.
Using select * for a query against more than one table is still
"sloppy" code and cold fusion tends be less forgiving of sloppy
code with each upgrade.
In case you were wondering, it's "sloppy" because it brings
back more data than you need. You will never need the joining
fields twice.

No 'order by' selection for cluster tables generates run-time

Hi together,
Basically I want to use a "select...order by" statement with table mhnd.
Since mhnd is a cluster table you can not use "...order by".
So, I use a select ... into table. I then sort this table and finally read it (index = 1)
Unfortunatly this approach generates huge run-time.
What can be done to minimize run-time?
Thanks for any help

Hi Gerd,
Which cluster table you are using and what`s data you wanted? Maybe there are some FM to extract data from it.
regards,
Archer

Dynamic select for multiple tables

Hi Thanks for your reply.Can you please help me in this issue.
I have a requirement like how to select data from multiple tables using dynamic select. How do we maintain dynamic where condition.
Manohar.

[How to write dynamic where clause|How to write a Dynamic Where clause]

Select into another table

Hello -
I'm running Oracle 8.1.7.4. Is there a way to run a query and automatically load the results into a newly created table? For example, my secondary table currently does not exist. I want to run a query, and at the same time, create and load the secondary table with the query results.
Thanks.

A utilização da clausula storage (initial value integer) pode melhorar o desempenho no momento da criação da tabela, pois evita a extensão automática do segmento no momento da carga, segue um exemplo:
create table teste
storage (initial 2048 k) /*para ser mais preciso verifique o tamanho do segmento tabela1 e substitua o valor initial da clausula storage */
as select * from tabela1 nologging

How to restrict the record selection for PLPO table .

Hi,
Am selecting 'plnnr' and 'vornr' from PLPO table . For one Plnnr their are multiple Vornr including 0001 & 9999.
I want to select only those entries which have only Vornr 0001 & 9999.
Ex : 1) Plnnr - 5689
           Vornr - 0001,2536,8989,9999
       2) Plnnr - 8787
           vornr - 0001
       3) Plnnr - 5936
           vornr - 9999
       4) Plnnr - 2345
           vornr - 0001,9999
Here for this example i want to select only the entry with Plnnr = 2345 as it only contains 0001 & 9999.
Can any one let me know how to get this in a select query.
Your help is much appreciated.
Thanks in advance.
Ravi Kasnale.

Hi
Try with below code
RANGES:r_vornr FOR plpo-vornr.
TYPES:BEGIN OF ty_plpo,
plnnr TYPE plpo-plnnr,
vornr TYPE plpo-vornr,
END OF ty_plpo.
DATA:it_plpo_temp TYPE STANDARD TABLE OF ty_plpo.
DATA:it_plpo TYPE STANDARD TABLE OF ty_plpo.
DATA:it_plpo_temp1 TYPE STANDARD TABLE OF ty_plpo.
DATA:wa_plpo_temp1 TYPE ty_plpo.
DATA:v_line TYPE sy-tabix.
START-OF-SELECTION.
r_vornr-sign = 'I'.
r_vornr-option = 'EQ'.
r_vornr-low = '0000'.
CLEAR:r_vornr-high.
APPEND r_vornr.
r_vornr-sign = 'I'.
r_vornr-option = 'EQ'.
r_vornr-low = '9999'.
CLEAR:r_vornr-high.
APPEND r_vornr.
SELECT plnnr vornr FROM plpo INTO TABLE it_plpo_temp1 WHERE vornr IN r_vornr.
CLEAR:it_plpo[].
LOOP AT it_plpo_temp1 INTO wa_plpo_temp1.
    CLEAR:it_plpo_temp[].
    it_plpo_temp[] = it_plpo_temp1[].
    DELETE it_plpo_temp WHERE plnnr <> wa_plpo_temp1-plnnr.
    DESCRIBE TABLE it_plpo_temp LINES v_line.
    IF v_line EQ '2'.
      APPEND LINES OF it_plpo_temp TO it_plpo.
    ENDIF.
ENDLOOP.
SORT it_plpo BY plnnr.
DELETE ADJACENT DUPLICATES FROM it_plpo COMPARING plnnr.
Regards
Srilaxmi

Inserting record in table on selection of another table

Hi All,
I have a table with multiple line items, and i have one insert button.
If i select line items in first table i want to create new records in 2nd table that is new structure( some values are same ).
Here problem is i am getting all records in second table eventhough i select only one? check this code and help...
here code i am using..in insert button.
DATA lo_nd_it_lips TYPE REF TO if_wd_context_node.
DATA lo_el_it_lips TYPE REF TO if_wd_context_element.
DATA ls_it_lips TYPE wd_this->Element_it_lips.
DATA lt_it_lips TYPE wd_this->Elements_it_lips.
navigate from <CONTEXT> to <IT_LIPS> via lead selection
lo_nd_it_lips = wd_context->path_get_node( path = `ZRETURN_DEL_CHANGE.CHANGING_3.IT_LIPS` ).
get element via lead selection
lo_el_it_lips = lo_nd_it_lips->get_element( ).
get all declared attributes
lo_nd_it_lips->get_static_attributes_table( importing table = lt_it_lips ).
DATA lo_nd_pack_mat TYPE REF TO if_wd_context_node.
DATA lo_el_pack_mat TYPE REF TO if_wd_context_element.
DATA ls_pack_mat TYPE wd_this->Element_pack_mat.
navigate from <CONTEXT> to <PACK_MAT> via lead selection
lo_nd_pack_mat = wd_context->get_child_node( name = wd_this->wdctx_pack_mat ).
loop at lt_it_lips into ls_it_lips.
    ls_pack_mat-PACK_MATERIAL = 'PACKING1'.
    ls_pack_mat-packing_qty = ls_it_lips-PICK_QTY.
    ls_pack_mat-material = ls_it_lips-matnr.
    ls_pack_mat-plant = ls_it_lips-werks.
    append ls_pack_mat to lt_pack_mat.
endloop.
lo_nd_pack_mat->bind_table( LT_PACK_MAT ).
Thanks,
venkat.

Hi
Try with tis code..
DATA lo_nd_it_lips TYPE REF TO if_wd_context_node.
DATA lo_el_it_lips TYPE REF TO if_wd_context_element.
DATA ls_it_lips TYPE wd_this->Element_it_lips.
DATA lt_it_lips TYPE wd_this->Elements_it_lips.
DATA: wa_temp TYPE REF TO if_wd_context_element,
        lt_temp TYPE wdr_context_element_set.
navigate from <CONTEXT> to <IT_LIPS> via lead selection
lo_nd_it_lips = wd_context->path_get_node( path = `ZRETURN_DEL_CHANGE.CHANGING_3.IT_LIPS` ).
CALL METHOD lo_nd_it_lips->get_selected_elements
RECEIVING
set = lt_temp.
DATA lo_nd_pack_mat TYPE REF TO if_wd_context_node.
DATA lo_el_pack_mat TYPE REF TO if_wd_context_element.
DATA ls_pack_mat TYPE wd_this->Element_pack_mat.
DATA lt_pack_mat TYPE wd_this->Elements_pack_mat.
get element via lead selection
lo_el_pack_mat = lo_nd_pack_mat->get_element( ).
navigate from <CONTEXT> to <PACK_MAT> via lead selection
lo_nd_pack_mat = wd_context->get_child_node( name = wd_this->wdctx_pack_mat ).
LOOP AT lt_temp INTO wa_temp.
CALL METHOD wa_temp->get_static_attributes
IMPORTING
static_attributes = ls_it_lips.
    ls_pack_mat-PACK_MATERIAL = 'PACKING1'.
    ls_pack_mat-packing_qty = ls_it_lips-PICK_QTY.
    ls_pack_mat-material = ls_it_lips-matnr.
    ls_pack_mat-plant = ls_it_lips-werks.
    append ls_pack_mat to lt_pack_mat.
CLEAR ls_pack_mat.
ENDLOOP.
lo_nd_pack_mat->bind_table( new_items = LT_PACK_MAT ).
Cheers,
Kris.

Select from another table within a select

Hello all,
Here is my problem. I am working with thousands of records in each of the tables I am accessing. In the following code it takes about 1min-2min to process this select statement. I get the results I want but the query time is unacceptable. With all of my queries combined it would take over 10 days to complete this code. I would like to cut this time down as much as possible and feel this is the only way to achieve this. I have also tried temp tables to store the rows from the second select statement, no luck. Any input would be greatly appreciated.
Thanks
select count(*)
     from first_table
     where id='1'
               and contract_year='2006'
               and site_code='00007'
               and district='00002'
               and std_id in (select std_id from second_table where attempt = 'Y' and scale ='Y');

A few thoughts. First, you could try this...
SELECT COUNT(*)
FROM   first_table a,
       second_table b
WHERE a.id='1'
AND    a.contract_year='2006'
AND    a.site_code='00007'
AND    a.district='00002'
AND    a.std_id = b.std_id
AND    b.attempt = 'F'
AND    b.scale = 'Y';If you have no indexes, you could try the PARALLEL hint to improve the query. You could CACHE one or both tables to improve performance. Of course, indexes are always a preferred option!. As a final thought, if this is really going to take 10 days, perhaps the procedure(s) you are executing are inherently inefficient. You might want start there first.
Greg Pike
http://www.singlequery.com

Make Select for another table in HTML Client

Similar Messages

Maybe you are looking for