Makefile for building 32 and 64 bit versions of a driver/app

Does anyone have good example Makefile that can build both a 32bit and 64bit version on device driver and userspace programs? I'm using gcc and gmake to build a streams module and some user space utilities for both 32 and 64 bit x86 and Sparc architectures. I currently have a bunch of taget specific make files, but I know there must be a better more elegant way of doing this. Ideally I would like to build both the 32 and 64 bit versions for the running architecture with the same make command. I don't need to cross compile (ie. build sparc on x86 ).

Yes, with Creative Cloud you will have both 32 and 64 bit versions installed. 32 bit is useful in cases when you have a plugin that only supports 32 bit, not 64 bit.
You might check below forum discussion as well.
http://forums.adobe.com/message/4737722

Similar Messages

  • Building 32 bit version of ROracle on windows

    I have not been able to build 32 bit version through Zip file provided. It always build 64 bit version. Commands doesn't give any error but it doesn't create directory for 32 bit version. I want to Rscript and since it doesn't have 32 bit DLL I couldn't use Rscript.

    The recommended method of building binary R packages is to use:
    R CMD INSTALL --build pkg
    where pkg is the name of a source tarball (in the .tar.gz format, e.g., ROracle_1.1-11.tar.gz).
    This operates by first installing the package and then packing the installed binaries into the appropriate binary package file for the particular platform.
    The ROracle installation instructions contains the complete set of steps and prerequisites for building a Windows 32bit version using the package source.
    Sherry

  • My computer is not recognizing my ipod shuffle.  The computer says to use the ipod reset utility.  When I tried doing this it told me that it was for a 32 bit version which I obviously do not have.  My computer is only a few months old.  What do I do now?

    My computer is not recognizing my ipod shuffle.  The computer says to use the ipod reset utility.  When I did that it came up with another message that it was only good for a 32 bit version.  I guess I do not have a 32 bit version.  I just purchased my computer a few months ago and it uses the windows 7 operating system.  What do I do now?

    Not sure if this helps:-
    The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered  owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work.  Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple  Store and explain that they were gifted to you and ask how you can use them.  The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

  • Why is there no Boot Camp support for the 64-bit version of Windows 7 on the 64-bit iMac that I'm using?

    The early 2008 24" iMac 8,1 has a 2.8 ghz E8235 Intel Core 2 Duo processor with a data width of 64-bits.
    I am straining badly to understand why Apple is only providing drivers for the 32-bit version of Windows 7 for the 64-bit hardware that I want to install it on.

    The 64 bit drivers are there, but there have been some installation
    issues depending on Windows OS and Apple hardware.  You may
    want to post on the Bootcamp forum to get more direct response to
    your issue.
    FWIW, at one point, I forget when, I found I needed to manually
    open the 64 bit versions of the drivers to install them that were created
    on the bootcamp driver install disk (image).  As I recall the was a
    64 bit .msi "global" installer but even at that there was an individual
    one that needed to be manually installed.
    Its been a while since I last did this since I have been doing everything
    in Windows virtual machines with Parallels.

  • ITunes: Installer is indented for a 32-bit version of windows. Please obtain a 64 bit installer

    I get this error message when installing the itunes64Setup.
    Installer is indented for a 32-bit version of windows. Please obtain a 64 bit installer from www.apple.com/support.
    Originally ,I copied my old 32bit files from Vista to a new windows 7 machine and then I  tried to reinstall iTunes  and got the error message.
    In addition, i tried to uninstall iTunes and it will not uninstall. Then I tried to clean it off manually and reinstall it. I still get the same message Installer is indented for a 32-bit version.
    Any suggestions.

    64bit architecture is a bit tricky, particularly when it comes to hardware. While I'm fairly sure Apple (like a lot of other companies) will work to support this in the future, the fact is that folks running 64bit right now are in a huge minority (less than 1/10 of a percent) and it's impossible to support everybody.
    There are probably about 10 times the number of folks running some version of Linux on their PCs (we're not talking Macs here right now) and yet they can't use the iPhone or a whole lot of other things. It's just the way of thw world -- pick something that isn't mainstream and you pay for being on the bleeding edge.
    It will catch up to you -- patience is indeed the key.

  • USB sync cable different for CDMA and GSM version phones?

    I recently ordered a USB sync cable for Iphone 4S from ebay. I want to know whether the USB sync cable for Iphone 4S is different for CDMA and GSM version phones? And if they are then what are the likely consequences if they are interchanged and used inadvertantly.

    All recent iDevices use the same type of connector/cable.
    Stedman

  • I bought student version for cc and still can't use the apps

    I bought student version for cc and still can't use the apps and when i sign in only the free CC membership appears I also chick the bank the transaction was successful and  i only resieve a confirmation email. i need to work with these apps so badly ... i hope i can fix it asap

    Does your subscription show on your account page? https://www.adobe.com/account.html

  • How do I download the iTunes for Window 32-Bit version?

    My Computer is under Window 7 32-Bit version. I cannot found the latest 32-Bit version iTunes for my computer. Please somebody told me that the link for the 32-Bit version. THx

    Welcome to the Apple Support Communities
    http://www.apple.com/itunes/download

  • Wanting to deactivate PS Elements on Mac and transfer program to a friend. Is it OK to download a trial to my friend's Mac and use my serial number.  Also is the serial number the same for Mac and Win versions?  Many thanks.

    Wanting to deactivate PS Elements on Mac and transfer program to a friend. Is it OK to download a trial to my friend's Mac and use my serial number.  Also is the serial number the same for Mac and Win versions?  Many thanks.

    Yes it should work transferring PSE10 from Mac to Mac. There is a download link below for PSE10, which your friend could use. There is a formal licence transfer process but it’s not necessary for your friend to register the product (activation is sufficient) although he couldn’t benefit from future upgrade pricing without registration. Serial numbers typically can only be registered one time.
    Boxed versions of PSE are normally multi-platform with disks for both Windows and Mac; so the serial number is the same. Downloads have tended to be single platform only although I believe the current version PSE12 will work on both Windows and Mac with the same serial number – boxed or download.
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  • I have upgraded my iTunes for Windows and I have lost all my apps and music

    I have upgraded my iTunes for Windows and I have lost all my apps and music.
    Although i signed in with my iTunes account, i can see only 5 apps (that i downloaded in the last 2-3 days), although on my iPad and iPhone i have more than 100 apps.
    If i connect my devices to iTunes, the syncronisation will be made the other way, from iTunes to iPhone/iPad, so i will lose everything.
    1. How can i restore these apps from the iCloud back-ups from my devices to my iTunes? Or any other method possible?
    2. If you can also give me a suggestion about how to find my music playlists, that would save me from a lot of useless work on creating them again.
    Thank you!

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    In the unlikely event that all the media has been inexplicably and permanently removed from your computer, see Recover your iTunes library from your iPod or iOS device.
    When you get it all working make a backup!
    tt2

  • I removed the 64 bit version of Firefox and now my bookmarks for the 32 bit version are gone. How do I get them restored?

    Are previous bookmarks for the default stored somewhere on my hard drive?

    See [[Uninstall Firefox from your computer]]. It's not specifically mentioned in the article since most people don't have multiple versions of Firefox installed (such as a released version and a [http://nightly.mozilla.org Nightly version]) but using the uninstall option '''Remove my Firefox personal data and customizations''' removes ALL of your Firefox [[Profiles|profile folder]] data and settings (bookmarks, passwords, cookies, etc.) . If you did choose that option when you uninstalled your 64-bit version of Firefox, then I'm afraid the profile data is gone.

  • Use different DPS accounts for iPad and Android versions of same app?

    Hi there,
      When creating an Android version of an iPad DPS app should the account used to create the content (the 'Title ID' in the DPS App Builder) be the same for both versions, or different? In the content viewer I know that iPad content will show up even on Android, so I'm thinking that the answer is probably no, but I haven't managed to find it mentioned in the Adobe docs.
      Thanks,
    Toby

    It depends, but usually the answer is that you want to use a different account for iOS and Android. Not all features supported in the iOS viewer are supported in the Android viewer. For example, if you use panoramas or iOS-specific web views in your articles, you'll want to be able to use different content for the Android viewers. Search for "dps supported features" for a comparison chart.
    I use different Application accounts for my apps. I use the Share/Copy feature to transfer the folios from the iOS account to the Android (or Windows) account. Then I delete the few articles that don't work well in the viewer and replace them with articles generated from different source files. That works well and doesn't require too much extra effort.
    If you want to reduce the amount of letterboxing in Android viewers, you'll definitely want to use different accounts and use, for example, 1280x800 folios instead of 1024x768.

  • 64 bit version of Ultranav driver not available for download

    Using either Update Retriever or System Update, version 7.202.1616.206 of the ThinkPad UltraNav Driver 2 (Alps) 64 bit is missing from the System Update catalogue. Package ID: 6EGY02WW is not presented. Only the 32 bit version (Package ID: 6EGX02WW) is available.
               It can be downloaded and manually installed from the driver matrix, but you would have to realize that there was a more recent version available that System Update had not installed, and go looking for it. This update applies to machine types:
               -        R61 (Machine types: 8914, 8918, 8919, 8920, 8927, 8928, 8929, 8930, 8932, 8933, 8934, 8935, 8936, 8937)
               -        R61i (Machine types: 8918, 8932)
               -        R500
               -        X300, X301
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's
    Solved!
    Go to Solution.

     Hi Stormycloud,
    The problem is resolved. Today, on both of my R500 machines,  Update Retriever informed me that the 64 bit version of the Ultranav utility was available for download. On both of my machines I then downloaded the driver. I was then able to use System Update to install the driver. Thank-you. Case closed.
    Regards,
    Chuck
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

  • I want to install webutil for Forms [32 Bit] Version 10.1.2.0.2 (Production

    hi all
    i want to install webutil for version Forms [32 Bit] Version 10.1.2.0.2 (Production) plz guide me with full of configurations .Already i searched the forum but i am still not able to install.Plz help me out.thanks in advance.
    sarah
    Edited by: SarahSarahSarah on Sep 13, 2009 11:58 AM

    Fully agree with Michael's answer.
    For all things webutil the best place to start is the webutil home page on OTN.
    In appendix A of the webutil pdf there is a handy checklist.

  • Download link for Forms [32 Bit] Version 6.0.8.12.1

    Hi All,
    please give me the URL to download Forms [32 Bit] Version 6.0.8.12.1.
    Regards
    Manish

    Go to otn.oracle.com/products/forms and click on teh SOFTWARE link on the left.
    Grant Ronald
    Forms Product Management Grant,
    I also urgently need the version 6.0.8.12.1
    BUt the link you mentioned constains 6irel2nt.exe file. When installed it
    is verions 6.0.8.11.3
    What and where can I find a patch to make it 6.0.8.12.1
    OR would i have any problem compiling programs in the 11.3 and run in runtime 12.1?
    Many thanks on you advice!

Maybe you are looking for

  • ITunes will not open, iTunes error 7, Windows error 193

    Whenever I try to open iTunes lately, i keep getting this error message: After I click OK on this message, i get another message: When i go to uninstall iTunes to attempt and reinstall it, QuickTime and other components, i can remove all, except for

  • Passing ICM Call Variable info to CAD not working

    Hello, we are running UCCE 7.2(7) with CAD 7.2(1) SR2 and we seem to be having an issue with the ICM Call Variable information being populated in the CAD. Up until now, it's been working fine. We have our ICM scripts set ICM Call Variables 1, 2 and 3

  • Is apps password visible in any configuration files in Oracle Apps R12.0.6?

    Hi Is apps password visible in any configuration files in Oracle Apps R12.0.6? Is it hard-coded or soft-coded? Regards Ateeq

  • Date added missing for itunes 12.

    In previous version of iTunes there was a column header option for audiobooks called date added. (when book was added to iTunes). I use the header to sort in reverse order so I get most recently added books at top of list.  This option seems to be mi

  • Integrating Dashboard / Publisher report into another application

    Hi, We do have a requirement in one of our applications, which is on Tomcat server. Where in we need to integrate an existing Dashboard and Publisher report to this application. And it should not be through GO URL, where i need to specify the usernam