Making checkboxes checked only when a certain value is true

I am trying to make a checkbox dynamically check itself. I only want the checkbox to be marked if a value is true. I am using JSP
here is what my code looks like.
<input type="checkbox" name = "Full1" value ="0">
<input type="checkbox" name = "ReadWrite1" value ="1">
<input type="checkbox" name = "Read1" value ="2">
<input type="checkbox" name = "Delete" value ="0">
say that my variable is
var = 0;
I want to to do something like this
if(var=0)
<input type="checkbox" checked name = "Full1" value ="0">
else
<input type="checkbox" name = "Full1" value ="0">

Guys, he said he was using jsp.
So Scooter, assuming that's what you meant (and not client-side javascript), you could achieve this effect with:
<% if (var == 0) { %>
<input type="checkbox" checked name="Full1" value="0">
<% } else { %>
<input type="checkbox" name="Full1" value ="0">
<% } %>

Similar Messages

  • Adding UIElement only when a certain rabiobutton is selected

    Hi,
    I would like to know if its possible to add a new Group UIElement with checkboxes inside it, if a certain radiobutton is selected and when another radio button is selected this group will disappear ...
    I will have to play with the method action onSelect...
    Thanks !

    Hi Benjman,
    Hi Benjman,
    U can do this., first create check box ui element also and bind visibility to an attribute.. then in onSelect of radio button show tat else hide tat..
    [Show/Hide UI Elements|http://wiki.sdn.sap.com/wiki/display/WDABAP/SimpleapplicationtochangepropertiesofUIElementsduringruntimeinWebDynpro+ABAP]... refer this link
    Reply if u need some more clarifications.,
    Thanks & Regards
    Kiran

  • Keeping the checkbox , checked, even when page refreshes.

    Hi,
    How do I get the value of thea checkbox, and what is the value of a checkbox?
    One thing when my BSP page refreshes, the 'tick' in the checkbox, vanishes, and the application pops up a message, that a particular category has not been checked.
    and how do I make my checkboxes  stateful, i.e it doesn't lose their 'tick' even when the page refreshes.
    Regards,
    Gautam

    Hi,
    What do you mean by refreshing? Using the reload button of the browser or submitting the form and showing the form again? If it's the latter, you only need to check the value of the field of your checkbox and add <b>checked</b> in the <input...> tag.
    Eddy
    <a href="/people/eddy.declercq/blog/2007/02/28/pimp-up-the-jam-choose-your-favourite for your favourite pimped out S(D)N site!

  • Making Wifi Network Only Available on Certain Computers

    My roommate and I have a password-protected wireless network. However, we are pretty sure someone else is able to use our wifi because we can manually check our bandwidth online; when we are out of town, bandwidth is still being used, and I have had more than one person connected to my iTunes before.
    My roommate said she's connected to password-protected wireless networks (for which she didn't know the password) before and had no idea how it even worked. But that must be what's happening!
    I've heard of wifi networks that only allow certain computers to connect to them. How can I get ours to do that, too?

    See if any of this helps.
    http://www.macriot.com/article.php/20050206065014907
    http://compnetworking.about.com/od/wirelesssecurity/tp/wifisecurity.htm
    My router lets me turn on a log file in it that records all traffic through it. Check your routers instructions to do this.

  • Avaialability control is checked only if the assigned value is increased in PO

    We are using former budgeting. We have have made the following setting. Warning message for AVC at Purchase requisition level and error message for AVC at PO and all other transaction groups. System is not issuing error message when the budget is exceeded in PO.
    eg: Budget 1000
    Purchase requisition created for 1100. Warning message at this stage is issued.
    Purchase order created against this PR for 1100. I expect the system to issue error message. However, no messages are issued.
    I would like to make the system messages error for processes starting from PO onwards like GR, SES, Invoice etc.
    I understand this is the standard behaviour of SAP since the fund is already reserved at PR stage and as long as the assigned value does not increase from the PR value. However, we would like to issue error message at PO stage even if there is not change in the assigned value if the commitment exceeds the budget.
    Thanks for your help.
    regards
    Raghuveer Kamath

    Hi,
    With BCS, you have a possiblity to issue a message, when a ledger is defined with so-called 'strict' logic. Otherwise, in former, if there is no decrease in consumable budget (and in your case there is none), AVC check is not triggered.
    Regards,
    Eli

  • Colours are not changing when a certain value is used

    Hi all. This might look strange. But anywayz...
    I am developing a game related to controlling trains and preventing them from clashing into one another. Naturally, my game allows the user to control the colour of the signals present at each station. My game has 3 layers: the first one does the game calculations, the second does the rendering aspects of the game, and the third constantly passes latest game data to the rendering layer.
    Now, the data for the signals comes from the first layer as an array of Integers. The array is named 'aspect'. Below is the code:
          switch(aspect.intValue())
    case 1:
    objGraphics.setColor(java.awt.Color.RED);
    break;
    case 2:
    objGraphics.setColor(java.awt.Color.ORANGE);
    break;
    case 3:
    objGraphics.setColor(java.awt.Color.GREEN);
    System.out.println("green");     
    The default colour of all the signals is red. Now while the game is in progress, if the user changes the colour of the signal to, for example, green, the change is not reflected on-screen. However, the SOP call works fine - the word 'green' is printed in the console.
    What further surprises me is that if I change the statement 'case 1' to 'case 4', and then while the game is in progress, change the colour to green, then the change is reflected on the console.
    I placed SOPs to find out if the values inside 'aspect' are correct. Ya they are correct - they contain values '1' at the start of the game, and when the user changes to green, then they contain '3'.
    So what could be the problem?

    Jeez... sorry.. my mistake.
    What I was doing was this: for drawing the signals, I take all the signals from the Calculations layer and store them in a Vector. Now this becomes a Vector of Integer arrays.
    In the Rendering layer, I have a loop which draws the stations. I also have a method which draws the aspects for each station. Inside the loop, for each station, I call this method. But I don't know what I was thinking while writing the method - I wrote it such dat it draws all the signals for all stations. Thus, for each call, it would redraw all the signals, not the ones for the current station.
    I have changed dat now, and it works. When the user selects a station and then selects the signal he wants, the change is rendered onscreen. Yippee!!
    sabre150, u were right after all!!! Also, thanks to all those who stopped by to rack ur brains over an issue that shouldn't have been one in the first place.
    But what I don't understand is this: Even with my wrong code, shouldn't the change be rendered? Ya, I know it was rendering the signals repeatedly, but then it should have rendered them rightly, isn't it? Or am I not getting something?

  • Firefox crashes only when entering certain websites, e.g., Bank of America, American Express, Smilebox (unstable) but not others. There are no crash reports. All software is current. Any suggestions? Thanks!

    Once I enter the log-in information the problem occurs, quickly. Gone.

    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • Disable a group of check boxes when we open a page in the display only mode

    Hi all,
           I need help in making a group of checkboxes display only when i open it in the display mode. I have made the following coding for it,butits not working.Can you help.
    MODULE disable_indicator OUTPUT.
      IF action_type = display_only.
        LOOP AT SCREEN.
          IF screen-name = INDICATOR_SET_OVERDUE_ITEM'.
            screen-input = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
        ELSE.
          LOOP AT SCREEN.
          IF screen-name = 'INDICATOR_SET_OVERDUE_ITEM'.
            screen-input = 1.
            MODIFY SCREEN.
           RETURN.
          ENDIF.
          ENDLOOP.
      ENDIF.
    ENDMODULE.                 "

    Hi  Kushaal Choudri,
    Chek out in Debug mode if first IF condition is triggering or not ?? Also assign Screen Group if u want to disable multiple fileds at a time and use it in IF condition...
    MODULE DISABLE_INDICATOR OUTPUT.
      IF ACTION_TYPE = 'DISPLAY_ONLY'. ==> Put it between Single Quote and check the CASE as it's case sensitive...
        LOOP AT SCREEN.
          IF SCREEN-NAME = 'INDICATOR_SET_OVERDUE_ITEM'.
            SCREEN-INPUT = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN.
          IF SCREEN-NAME = 'INDICATOR_SET_OVERDUE_ITEM'.
            SCREEN-INPUT = 1.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDMODULE.                    "disable_indicator OUTPUT
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7

  • Logging data only when value of tag increases

    Hello,
    I want to data log only when my tag value is increases another it will not log data in database.
    So how do I do this.
    Thanks & Regard
    Nitin Jain

    A functional global, which will look at the current value, compare it to the previous, and if the new value is greater, signal that fact, and replace the previous value with the new value. You probably want the comparison to have a range, or a threshhold, so that it has to have increased by a certain amount before this all occurs, also are you only concerned in increasing? If you signal were a slow sinusoidal one you would register increases all the way up one side of the waveform, then once the peak was reached no more data would be saved, unless of course the amplitude increased. Do a search on functional globals, Action Engines, to see what I'm refering to as a storage mechanism.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • How to run TCP/IP Tx in cRIO vi only when value changes?

    My design uses NI's TPC-2006 as the user interface for a cRIO-based product.  I use TCP/IP to exchange data between the TPC-2006 and cRIO.  My code causes the TPC to lock up after a variable number of minutes, typically about 10.  The OS is completely locked and requires a power cycle to recover.
    Based on the theory that the TPC-2006 is not keeping up with the TCP/IP packets sent by cRIO, I want to try configuring cRIO to transmit only when it has something new to say.  The event structure that I use for the TPC-2006 won't work on cRIO.  Can anyone out there suggest another approach?
    Jeff
    Climbing the Labview learning curve!
    Sanarus Medical
    Pleasanton, CA

    Hi Jeff,
    The simplest way to reduce transmission overhead in this scenario would be to encase your existing TCP/IP routine in a case structure that only executes if the data element you're interested in is not equal to its last value (stored in a shift register).  This shouldn't add much in the way of computational overhead on the RT side, but should reduce the flood of data if the value doesn't change very often.  Keep in mind also that if you have LabVIEW 8, you can use Shared Variables to send the data over your tcp/ip connection only when a new value is written to the variable - this may meet your needs just as well.
    Cheers,
    Matt Pollock
    National Instruments

  • Conditional suppress only if all column values are zero

    I would like to suppress whole column if dbfield value is 0.00. I was able to suppress it in common tab of format field by using formula if dbfield =0.00 then true else false.
    But i would like to suppress column value only when all the values in column are equal to 0.00. Otherwise I would like to retain those 0.00.
    Let me know how I can do this?
    Your response is appreciated
    -Thanks
    Raghu

    Go to "Format Field...", select the Common tab, and put something like the following in the Suppress formula.
    Maximum({dbField}) = 0

  • Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

    The javescript in below link works for me.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
    However, I'd like to set default user for people picker only when user checks a checkbox. 
    I am new to  development. Could you please help me on this requirement ?
    Thank you very much. 

    Hello,
    Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
    http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • How can i set a form to read only when a checkbox it checked?

    How can i set a form to read only when a checkbox it checked?

    Hi,
    If you search the forums for Paul's example LockAllFields. This contains a function in a script object that you can call from the click event of the checkbox.
    Re: Saving Fillable Form as non-fillable PDF
    Good luck,
    Niall
    Assure Dynamics

  • Serv. Desk: Action: send an email only when a value in a field has changed

    Hello,
    In Soution Manager 4.0, Sevice Desk, I would like to create an action which creates an email only when a value of a certain field has changed.
    - only in change mode relevant
    - only when a value of one field has changed (e.g. Message Processort has changed from Buss. Partner 4 to 5. Than a mail should be sent to BP 5).
    - it should only send this kind of email when the field value has changed in change mode. In other words: it should not sent the email e.g. when the status has changed.
    I tried all kinds of things but I do not know on how to define the COnditions for an Action, so I can compare e.g.
    if <old value> <> <new value>
    Any ideas or experience on how to implement this without major modifications ?
    Thanks
    Christian

    Hi Christian,
    check out my question on SDN.
    Email on Status Change
    it has details on how to send an email when the status changes. I believe you are going to have to do something like this for each of the fields you want to create an Action Starting Condition for.
    regards,
    Jason

  • Insert statement in when-checkbox-checked trigger doesn't work

    in a when-checkbox-checked trigger, I wrote the follwing code :
    IF :sunday = 'Y' THEN
    msg_alert('Y','I',false);
    pkg_var.v_day_count := pkg_var.v_day_count + 1;
    msg_alert('1','I',false);
    :schtm_skmk.day_id := '1';
    msg_alert('2 ',I',false);
    INSERT INTO schtm      
    (ROUTE_ID, DAY_ID, FLIGHT_ID)
    VALUES
    (:schmf.ROUTE_ID, :schtm_skmk.day_id, 1);
    COMMIT;
    msg_alert('end insert schtm','I',false);
    END IF;     
    if the checkbox is checked, I assigned value '1' to day_id. Then, I want to insert a row into table SCHTM. But, the insert statement fail. The msg_alert '2' pop up. The msg_alert 'end insert schtm' does not pop up, meaning the insert statement fail. It also fail after I replace the insert statement with the exact value of the item. But if I execute this statement in SQL plus, it insert a row into the database.
    What is strange here is it did work before, I successfully insert 2 rows into database. But when I test it again just a while later, it never work anymore.
    Please help.
    Thanks,
    Shu Wen

    It seems that you have missed ELSE. By the way there is only one INSERT ...

Maybe you are looking for