Making Import status as failed

Hi All,
Is there any way to make the import process as failed by using the event script.
Before file import or by using after file import.
Thanks Ravi.

Hi,
you can set the status to fail in the sub-event "EndProcess" of event script ImportAction.
HTH

Similar Messages

Zfs-import-cache.service fails on startup

I have been using zfs for a couple of days now.
It's only for storage purposes, not for root system.
I installed it, and enabled zfs.target for startup, but since a couple of reboots ago, I noticed zfs-import-cache.service fails resulting in sometimes, the pool not getting mounted.
● zfs-import-cache.service - Import ZFS pools by cache file
Loaded: loaded (/usr/lib/systemd/system/zfs-import-cache.service; static)
Active: failed (Result: exit-code) since sáb 2014-07-05 23:42:21 CEST; 44min ago
Process: 174 ExecStart=/usr/bin/zpool import -c /etc/zfs/zpool.cache -aN (code=exited, status=1/FAILURE)
Main PID: 174 (code=exited, status=1/FAILURE)
jul 05 23:42:21 7thHeaven zpool[174]: Unable to open /dev/zfs: No such file or directory.
jul 05 23:42:21 7thHeaven zpool[174]: Verify the ZFS module stack is loaded by running '/sbin/modprobe zfs'.
jul 05 23:42:21 7thHeaven systemd[1]: zfs-import-cache.service: main process exited, code=exited, status=1/FAILURE
jul 05 23:42:21 7thHeaven systemd[1]: Failed to start Import ZFS pools by cache file.
jul 05 23:42:21 7thHeaven systemd[1]: Unit zfs-import-cache.service entered failed state.
Any idea why would this happen?
Thanks.

Xi0N wrote:BTW, I'm trying to setup zed so it would send me an email on every event, but I don't seem to get it working. I installed and started postfix, but I still don't really know how to configure it so the mails get sent. Any tips?
You need to create a script in /etc/zfs/zed.d/ - see the zed man page.
Use the existing scripts in that dir for examples (e.g. scrub.finish-email.sh).
The existing scripts use /etc/zfs/zed.d/zed.rc; in that you need to set “ZED_EMAIL” to the email address to mail to in order to make the existing mailer scripts do something. Your script could instead hard code the email address.
cmtonkinson wrote:I've got a related problem I just posted about yesterday, I wonder if this busywait tactic would work in my scenario as well - although isn't there a way to do this with Require/After instead of an ExecStartPre wait script?
If you look at zfs.target et al, you'll see they already use Require/After/Before to order things. Xi0N's problem is not the ordering, but that the kernel module hasn't always created the zfs device when systemd runs the .service.
I use ZFS as my root, and the zfs hook runscript has a similar wait in it - so for me the zfs device exists by the time systemd runs the .service.
I don't know if your problem is the slowness of the zfs kernel modules or something else. My first port of call would be to check the journal for errors.

EMD_MAINTENANCE.EXECUTE_EM_DBMS_JOB_PROCS(); job status is failed

Hi all,
after I import dump fully database , the EMD_MAINTENANCE.EXECUTE_EM_DBMS_JOB_PROCS(); job status is failed,
what is the reason and how could I start it successfully.
appreciate your help.

user2075318 wrote:
Osama , thx for the updates,
but unfortunatly I don't have access to oracle support site,
it's grate if you can give me the 444033.1 document please.you need to have valid license to get oracle.support.com , otherwise i can't post anything here it will be illegal to do that

(UCCE) CUIC - Dataset status is Failed (Database error)

I copied the RD Skill Summary Weekly Historical report definition, added several formula fields. I copied the report because this isn't my forte and didn't want to chance mucking up the existing one.
It didn't take long to figure out that if I change the datatype or check the export as hh:mm:ss checkbox -- I get the "Dataset status is Failed (Database error)" error when running any reports against that definition. I then have to delete the reports, delete the definition, recreate the definition, and recreate the reports.
For some reason though, that error has been popping up intermittently without any changes to the definition. I tried doing an export of both the definition and reports (prior to getting the error when running the reports), and then deleting and importing after getting the error, but end up getting the same error. Full error details attached.
Basically, I'm recreating the report definition and reports every day throughout the day. I'm getting pretty quick at it, but it's still a pita. Any ideas are greatly appreciated.
thanks,
will

Nevermind - the stock report definition from cco is 15128 characters long. it's getting truncated down to 15000. Awesome.

Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
Thanks

Hi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Add-on Status is Failed, but Add-on is connected

Good Day!
Hi Experts,
I had created an installer for my Add-on for the client. This is a project from SAP B1 Studio.
SAP B1 version is 9.0 PL11.
1. The add-on is running ok in Debug Mode.
2. I've successfully created an ARD File.
3. Successfully installed ARD File.
4. On Add-on Manager, when I tried to click Start, the add-on says Incorrect Connection String for Add-on. Even if the Status is Failed, the Add-on still executes. It still displays the custom form, the events, CFL etc.
I've used the SAPBouicom.Dll in my debug folder, and I ensured the latest SAP B1 Studio and DI API is installed (PL11). I even removed the old files and reinstalled but the same result appears.
Your help is greatly appreciated in this matter.

i had already a Debug Code in my Environment.
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Environment.GetCommandLineArgs.GetValue(1).ToString
                Try
                    SboGuiApi.Connect(sConnectionString)
                    ' Causes an Error Here but if I don't terminate the Add-on here, the Add-on will still run
                Catch ex As Exception
                         'System.Windows.Forms.MessageBox.Show("No SAP Business One Application was found")
                         'End
                    Try
SBO_Application = SboGuiApi.GetApplication()

Blank Screen in Import Manager under Import Status Tab

Hi Experts,
Problem: Blank Screen in Import Manager under Import Status Tab.
I have opened import manager with source file(excel & xml) and i have also did mapping from source fields to destination fields and also seleted display/key field in match records tab and refreshed it. when I select Import Status tab. I am not able to see any details/status regarding the map which i have done. when i click on excute button.. the source file is sucessfully import and pop up dailogue box shown. I have also checked in Data Manager and data was visible.
But.. at Import Status Tab in import manager.. i am not able to see any details.. it is just showing as white blank screen.
If any one know the solution could you please help me out.
Thanks
Bharat

Hi Bharat,
As per New MDM Release we have to Install MDM 7.1 servers on 64 bit machine and GUI's can be installed on 32 machine, whreas if you are using MDM 5.5 Version then 32 bit machine can be used.
Now as you said that you have sucessfully imported the excel file and then you have mapped the filed after that without any error you got the ready to import screen to import the data into MDM database then processwise there is no problem as far as screens are concern i will suggest you please un-install MDM Import Manager GUI and then again install it, your problem would be solved.
If it doesnt please do let us know.
Thanks and Regards
Praful.

Import from iphoto fails every time.

Import from iphoto fails every time.

It should not be a serious flaw, since this something that you only do ONCE. You don't want to use both organizer and iphoto. You'll have two sets of photos with no knowledge of each other. Import from iphoto is not meant to be a regular use item, only for the one time after you've decided organizer is what you prefer. It's fine to make a small test catalog while you decide whether iphoto or organizer suits you better, but to keep on using both is going to make you crazy in short order.

STMS problem ( import status - import runnig does not change)

I have the same problem like this:
While Transporting request in our production server the status of request from import running (truck sign) does not change.
But the effect of the request is seen in the production but status does not change.
see :Re: STMS problem ( import status - import runnig does not change)
I did se14 as experts suggested, the history truck sign go away,seem work fine,
but when new request need STMS to trans, the truck sign happened again,
I need you help,thank you!

thanks for all reply,
the last two answers are the same,I think this is the right key,
I'm a ABAPer actually,yesterday I asked our headquarters basis to help,
and I don't know what he did,now this problem is be solved,
PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
thanks again!

Import status- import running does not change during the mass import of TR

Dear All,
I have successfully imported single requests in my newly installed SAP ECC EHP4 PRD system but when I have tried to import 8 transport requests(Mass Import) then the Import status is not changing from import running (Truck button still appears).
But the effect of the request is seen in the production system but the status does not change.
I have checked the logs and found that all the requests have been imported successfully but the Truck status does not change.
I have restated the system but no use still the same.
Thanks in Advance...
Latha

Import Running for a long time on ECC 6.0
The background job RDDIMPDP is running on client 000 as well as the relevant client.
Below is the TP System Log:
WARNING: System CC6. Warning. 20090914042136 :
WARNING: Background job not running properly. Function: G Jobcount: 04512801 Status: S.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
As per NOTE: 26966, it could be b'cause the background job process slots are occupied,
Regards
Vikas Nagar

Import to QA fails

Hi Guys,
We have enhance the Standard ESS/MSS applications. The activation and check-in into development system went on successfully. The assembly step was also successful, but suprisingly the import to QA failed.
The logs give out the following error message. Suprising that it is stopped eploying at Per_Address_AU/Per_Addr DC. The DCs before that got deployed appropriately. After thsi failed the import paused. Please see the compelte error message below.
Appreciate any guidance
Failed to depl
oy the file '/usr/sap/QEP/JC01/j2ee/cluster/server0/./temp/webdynpro/public/sap.com/ess~au/webdynpro/Applications/com.sap.xss.hr.per.au.address.Per_Address_AU/Per_Addr
ess_AU.xml' into the database. Reason: Development Object 'sap.com/essauaddr' contains already same repository content. Hint: fully qualified name of the repository
VMO must be globally unique.
[EXCEPTION]
#3#sap.com/ess~au#com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook#com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to depl
oy the file '/usr/sap/QEP/JC01/j2ee/cluster/server0/./temp/webdynpro/public/sap.com/ess~au/webdynpro/Applications/com.sap.xss.hr.per.au.address.Per_Address_AU/Per_Addr
ess_AU.xml' into the database. Reason: Development Object 'sap.com/essauaddr' contains already same repository content. Hint: fully qualified name of the repository
VMO must be globally unique.
        at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.checkVMOsExistInOtherDC(RepositoryUpdateManager.java:504)
        at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.deployRepositoryContent(RepositoryUpdateManager.java:98)
        at com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook.onDeploy(RepositoryContainerHook.java:232)
        at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1007)
        at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1259)
        at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
        at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
        at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
        at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
        at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
        at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
        at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#00110A43A3160060000014E4000010FF00044A9E44E8228B#1207943571541#com.sap.engine.services.deploy##com.sap.engine.services.deploy#Administrator#388860####da0389700800
11dd9bd100110a43a316#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in operation update with application sap.com/ess~a
u.#2#update#sap.com/ess~au#
#1.5#00110A43A3160060000014E5000010FF00044A9E44E843CA#1207943571549#com.sap.engine.services.deploy##com.sap.engine.services.deploy#Administrator#388860####da0389700800
11dd9bd100110a43a316#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeployme
ntException: Exception in operation update with application sap.com/ess~au.
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:394)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:294)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
        at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
        at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
        at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
        at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Hi Viswadeep,
Application with same name not possible with the same application aliases - context root. You need to define different application aliases for the application to work properly.
Best Regards
Arun Jaiswal

Records goin to exception folder with "Ready to Import" status

Hello experts:
I am using import server to extract master data to MDM Data Manager, but after one true exception all the files keep going to the Exception folder, when I process them to the import manager through Port --> Exception folder, there are not really any exceptions, I go to Import Status tab and all of them are "ready to Import".
Any idea how to fix that?
Thanks for your help,
Claudia Hardeman

Hello Claudia,
"Ready to Import" in Import Manager means, that the field and value mapping is complete and that you can start the import process. During the import process it is possible that exceptions (e.g. value exceptions like a "Unique Constraint Violation") occure, so that the records can be imported partially only. So did you actually import the records in Import Manager?
Additionally you can have a look at the Import logs. They should contain some information why a file is placed into an exception folder.
Depending on the port configuration in MDM Console you might have to cleanup the exceptions first to unblock the port, too.
Best regards
Michael

Transport set import status is always = "MERGE" ...?

Hi,
My transport set import status is always = "MERGE" in Portal and I cannot delete this transport set.
What should I do ?
Thanks for your help,
Best Regards,
Jean-Christophe AUDARD

Hi!
The transport set status is MERGE when the import job has not been submitted to background. You might want to check your job_queue_processes parameter. The way to do this is
In SQL*Plus, simply perform the following query:
select name, value from v$parameter where name='job_queue_processes'
The value for job_queue_processes should be at least 2 to allow the execution of background jobs.
An alternative way of checking the job_queue_processes parameter is to simply examine the init.ora file in your database's ORACLE_HOME.

Utils import config command failed on CUCM8.6.1

I've created cucm861sub.flp file and uploaded it to the datastore on ESXi 4.1, then mapped to the floppy, i.e. I followed procedure on cisco wiki to the last letter. Still, after applying command I'm receiving following error: "Cannot locate configuration file"
I've used Winimage to crate 1.44MB floppy that contains only one file, called platformConfig.xml (file was downloaded directly from CCO).
Was anybody able to apply successfully new identity feature?

I opened a TAC case and found this is a bug. CSCtx55507 :utils import config" is failing.
these are the call manager versions that has the fix for this issue: 8.6(2.10000.30), 8.6(1.98000.87), 8.6(1.98000.39) or any later version.

Making Import status as failed

Similar Messages

Maybe you are looking for