Making test code 'Fool Proof??' using an Abort type option
I have created 2 different tests for the Techs where I work. I have both set-up with abort buttons so if something should happen it will abort the test. but every now and then it seems as if someone will close one of the prompts for the test by clicking the 'X' in the upper right. I know I can just do away with the title bar and MAKE them press the button on the front panel to continue but I am not sure I want to do that just yet. What I am curiouos on is if the prompt vi that is running is a subvi in my main program, is there a way to pass through some sort of output if the vi is closed by that 'X'? this way I could put the program into an idle state. allowing the user to select a new task in the program without having to close it and restart.
This program was made about a yer agao and since then I have learned more with LabVIEW and will be working on cleaning my code and improving it as there are some things I should address, but making it fool proof is at the top of my list.
I am hoping there is a way to allow the subvi to pass a boolean or something to know that the prompt window was closed prematurely and to go into an idle state. if not I will remove the title bar to fix that problem.
Jeff D.
OS: Win 7 Ultimate
LabVIEW Version: 2011,2010,2009 installed
Certified LabVIEW Architect
Hi Dennis - the "discard?" option is a nice feature - never noticed it - thanks for the pointer.
When they give imbeciles handicap-parking, I won't have so far to walk!
Similar Messages
-
Unit Test code using wrong persistence unit
In the midst of learning Maven, I created a simple application in which I am using JPA (Java Persistence 1.0.2) with EclipseLink implementation (2.0.2).
Note: This is an Application Managed environment. So I manually control EntityManager's life cycle.
The persistence.xml file used by the main source code is different from the one that unit test code uses. Main code uses an Oracle DB and the test code uses an in-memory Derby.
Running unit tests was updating the Oracle DB (!) and I eventually managed to fix that by using two different persistence-units in the XML files.
However, I don't understand why that fixed the problem. I manually create and shut down the entity managers and they are not running concurrently. I'm pretty sure Maven (or the way I set it up) doesn't mess up the resources (XML files). In fact by looking at Maven's debug output I can see it's using the right XML file for unit tests.
Could someone enlighten me, please?Do you have both persistence.xml files on your classpath? If so, and they contain the same name for their respective persistence units, you should be getting a warning or error since they must have unique names. There is no way to tell which one you want to access otherwise.
Best Regards,
Chris -
I am writing an application for Test Stand, we are using modules previously written in HTBasic. Whenever I make a change to the code and try to re-run the program, it just runs the old version of the code. The only way to refresh the code is to close Test Stand down and restart it. Is there a way to flush the memory of modules?
Hi,
I haven't used HTBasic with TestStand 2.0.x, but I'm assuming that you have the steps in the sequence set to unload when sequence file is closed (look under the step properties -> run options tab).
If you're still prototypeing, use the File->Unload all modules option. Have a look at page 4-3 in the user manual - it refers to .DLLs, but I'm assuming the HTBasic falls into the same methodology.
Altering the run options from it's default will affect the memory useage and speed of execution of the test sequence. Have a look at page 5-22 (page 158 in the .pdf) in the TestStand user manual - basically, if a code module is loaded into memory already, when the step gets to execute, the loading overhead is already done. If it stays in memory after this, then it's avail
able for next time (quicker second run 'cos it doesn't need to load again. However, the balanceing factor is the sequence is useing more memory at a time, by haveing the module ready.
My usual setting is to use Load dynamically, and Unload after sequence executes. I use this is only during development however, as this is not the most speed friendly, but a compromise so that if I don't call a step I don't load it, but if I do use a step, I'm sure it's free again when I need to modify the .dll modules I create. If you have a look on page 5-7 (143) of the user manual you can set the sequence file to effectively over-ride each step's load and unload settings - useful if you want to revert back again later. If you use this, you'll see that the top two run options for the step are greyed out, but if you set it back with the sequence file options, they do revert back to their original settings.
Hope that helps (and works!!)
S.
// it takes almost no time to rate an answer -
What stub code does APEX uses when making a web service call ?
What stub code does APEX uses when making a web service call (manual web service reference)
I am using APEX (which was part of the 11g installation).Hi Steve,
Some options for the same issue:
web service time out
How to check for Web Srvice Timeout in ABAP Proxy call
Regards
Vijaya -
With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Is there a reference test code for Android to see if GPU acceleration is working on a device or not?
The subject says it all:
Is there a reference test code (available for downloading) for Android to see if GPU acceleration is working on a device or not once the AIR RC1 with GPU is installed ?
Perhaps something 'like' away3d info panel which shows if GPU is active or not...
I will try to build one in the meantime. Just didnt want to reinvent the wheel here.
TIA for any pointers. //GHI agree with the above posts, it would be great to have a place with a list of already known problems, and a way for those of us with the time and interest to participate in making the FiOS experience better. Several thoughts:
1) Send a PM to a moderator here asking to participate in a test, or asking for improvements to the Forum. I have done that, some of the improvements I suggested have occurred (thanks Kathleen and CharlotteS), hoping more will; it can't hurt. And I understand my request to be a beta tester has been forward to development. At least one poster put that kind of request in a forum post and I think his was also forwarded.
2) Go to the following Verizon Products Trial site and sign up to test new things: https://www36.verizon.com/MM/Protected/TestTrack/SignIn.aspx. No guarantees, not much on the site right now, but if you sign up you might get to participate in the future.
3) Consider using the Verizon Direct forum at http://www.dslreports.com to report problems rather than the FSC (or after a frustrating experience with the FSC). You have to be a registered user to post in that forum, but I have had a good experience using it. Verizon employees monitor the forum and respond, and only they and you can see the details of your and their posts (one of the things I have suggested to the moderators here is something like Verizon Direct here).
I am retired, I have time to put into an effort to improve FiOS TV. Plus I have quite a bit of experience in testing new computer hardware and software before announcment and/or delivery to customers (IBM), so I think I could help (and I really don't think I could hurt it...). Plus in two more days I will have had FiOS TV for three full years, I have gone through all of the good (and a little bad.....) along the way.
FWIW...
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.5.0
Keller, TX -
Dreamweaver as code generator for use in other applications?
Hello and thank you in advance for your time and your help!
I realize and apologize for this lengthy post but I had to explain my issue thoroughly...
I've just begun teaching myself to use Dreamweaver CS3 (on an iMac running OS X 10.5.8 - Leopard) with the "Dreamweaver CS3 Missing Manual". I don't know HTML or CSS but am very willing to learn as much as I can. In the near future, I hope to create a new website for my domain in Dreamweaver. However, I have an urgent and immediate need and would like to know whether Dreamweaver can serve a specific purpose...
My question is whether I will still be able to accomplish the following (even if it is by different means) once I convert to Dreamweaver from FrontPage AND whether or not I should abolish all of the current files at my web server and remove FrontPage extensions before I invest any time into making Dreamweaver my new tool for website development and maintenance.
I have a domain hosted by GoDaddy and a rather old website that I created using FrontPage 2002 (on a Windows XP desktop). For over 5 years now, I've used FrontPage so that I can work WYSIWYG to generate HTML code that I use in my eBay auction listings. Recently, however, the "network folder" for my web server (on the Windows XP desktop) stopped accepting my password and I cannot find a fix for it. It's my opportunity to finally break from FrontPage but I'm hoping that, before I do, someone can tell me whether or not Dreamweaver can serve my interim and long-term purposes.
I've been uploading image files using the "network folder" in Windows XP that I set up with FrontPage over 5 years ago. I "drag and drop" or "cut and paste" image files from my computer to my web server in Windows Explorer via the "network folder". Once the images are on the web server, I open FrontPage and ensure that the images show up in my web server files. I then open an existing .html document that I have saved on my hard drive, replace text and images within the file, save the file under a different file name, and then switch to code view where I copy the code directly from FrontPage into my eBay listing. This works perfectly well and has for over 5 years. I do not publish these .html files to the web, nor do I upload the .html files to my web server. They exist only on my hard drive and simply to provide the underlying HTML code for the eBay listings and nothing more. This method allows the images in my eBay auctions to be automatically sourced to their location on my web server without requiring me to do anything more than insert the image(s) from my web server into the .html document/file.
I think I'm discovering that Dreamweaver works specifically with websites and I'm wondering whether I can use it more generically in this way. If I'm learning correctly, Dreamweaver is quite particular about web server files having an exact match to a root folder on my hard drive. I've defined my site within Dreamweaver and I've since downloaded all existing files from my web server to my hard drive within a folder that is designated as the root folder. However, when I now open an existing .html document (one originally created in FrontPage and stored on my hard drive only) and replace an image (by cutting the existing image and dragging the other from the "remote view" of the "files" pane) with one that exists both on my web server and in my root folder, Dreamweaver makes the source/reference path point to the image file on my hard drive and, as you know, that won't do if I transfer that code to my eBay listing. So I've uploaded the actual .html file to the web server within Dreamweaver (something that I never had to do with FrontPage) and now I can change the HTML code manually (or the source in the "properties" panel for the image) for the image source to include "http://mydomain/..." (it doesn't include that automatically as FrontPage did). That now seems to make the code work but I have to store my .html files on the server and I have to make that manual change.
My question is whether I will still be able to do accomplish the following (even if it is by different means) once I convert to Dreamweaver from FrontPage AND whether or not I should abolish all of the current files at my web server and remove FrontPage extensions before I invest any time into making Dreamweaver my new tool for website development and maintenance.
Thank you very sincerely for taking the time to read this and for your response and good advice!Get Turbo Lister (a free page editing and listing tool from eBay).
http://pages.ebay.com/turbo_lister/
eBay uses some seriously flawed markup on their auction pages. In fact, they don't even ALLOW you to use good code. You're better off using their proprietary tools for this. IMO, DW is not the right tool for creating eBay pages.
When you're ready to build a serious web site, come back to Dreamweaver.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
Is $99 sign up required before you can test code on a device (iphone/itouch
Hi
Is the $99 sign up required before you can test code on an iPhone/ Itouch device?
I am just trying to compile a simple program and run it on the device, but I get a CodeSign error. Is Codesign something that can be done without signing up for $99, or is there a special code given during sign up to use unique to the developer? Just want to test code on a real device, not in the simulator. Seems a bit much to require me to pay a $99 fee to do so if I'm just writing stuff for myself at this point.Even after paying the $99 fee, I don't believe this provides for being able to install your own developed app on your iPhone - not via the simulator only, or does it?
-
Is this logging code faster than using a standard logging API like log4J
is this logging code faster than using a standard logging API like log4J or the logging API in java 1.4
As you can see my needs are extremely simple. write some stuff to text file and write some stuff to dos window.
I am thinking about using this with a multi threaded app. So all the threads ~ 200 will be using this simultaneously.
* Tracer.class logs items according to the following criteria:
* 2 = goes to text file Crawler_log.txt
* 1 = goes to console window because it is higher priority.
* @author Stephen
* @version 1.0
* @since June 2002
import java.io.*;
import java.net.*;
import java.util.*;
import java.text.*;
class Tracer{
public static void log(int traceLevel, String message, Object value)
if(traceLevel == 1){
System.out.println(getLogFileDate(new Date()) +" >" + message+ " value = " + value.toString()););
}else{
pout.write(getLogFileDate(new Date()) +" >" + message + " value = " + value.toString());
pout.flush();
public static void log(int traceLevel, String message )
if(traceLevel == 1){System.out.println(message);
}else{
pout.write(message ) ;
pout.flush();
//public static accessor method
public static Tracer getTracerInstance()
return tracerInstance;
private static String getLogFileDate(Date d )
String s = df.format(d);
String s1= s.replace(',','-');
String s2= s1.replace(' ','-');
String s3= s2.replace(':','.');
System.out.println("getLogFileDate() = " + s3 ) ;
return s3;
//private instance
private Tracer(){
System.out.println("Tracer constructor works");
df = DateFormat.getDateTimeInstance(DateFormat.MEDIUM, DateFormat.MEDIUM);
date = new java.util.Date();
try{
pout = new PrintWriter(new BufferedWriter(new FileWriter("Crawler_log"+getLogFileDate(new Date())+".txt", true)));
pout.write("**************** New Log File Created "+ getLogFileDate(new Date()) +"****************");
pout.flush();
}catch (IOException e){
System.out.println("**********THERE WAS A CRITICAL ERROR GETTING TRACER SINGLETON INITIALIZED. APPLICATION WILL STOP EXECUTION. ******* ");
public static void main(String[] argz){
System.out.println("main method starts ");
Tracer tt = Tracer.getTracerInstance();
System.out.println("main method successfully gets Tracer instance tt. "+ tt.toString());
//the next method is where it fails - on pout.write() of log method. Why ?
tt.log(1, "HIGH PRIORITY");
System.out.println("main method ends ");
//private static reference
private static Tracer tracerInstance = new Tracer();
private static Date date = null;
private static PrintWriter pout = null;
public static DateFormat df = null;
}In general I'd guess that a small, custom thing will be faster than a large, generic thing with a lot of options. That is, unless the writer of the small program have done something stupid, og the writer of the large program have done something very smart.
One problem with java in this respect is that it is next to impossible to judge exactly how much machine-level processing a single java statement takes. Things like JIT compilers makes it even harder.
In the end, there is really only one way to find out: Test it. -
Revision: 1433
Author: [email protected]
Date: 2008-04-28 13:13:12 -0700 (Mon, 28 Apr 2008)
Log Message:
adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console, used when running on Websphere with administrative security enabled. Should call setCredentials("bob","bob1") to use this RO.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xmlHi,
It seems that you were using Hyper-V Remote Management Configuration Utility from the link
http://code.msdn.microsoft.com/HVRemote, if so, you can refer to the following link.
Configure Hyper-V Remote Management in seconds
http://blogs.technet.com/jhoward/archive/2008/11/14/configure-hyper-v-remote-management-in-seconds.aspx
By the way, if you want to perform the further research about Hyper-V Remote Management Configuration Utility, it is recommend that you to get further
support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
For your convenience, I have list the related link as followed.
Discussions for Hyper-V Remote Management Configuration Utility
http://code.msdn.microsoft.com/HVRemote/Thread/List.aspx
Best Regards,
Vincent Hu -
Could this Fibonacci sequence generator and prime tester code be made more
Hey,
Could this Fibonacci sequence generator and prime tester code be made more efficient?
package sideprojects;
public class Exam2008Question2F
public static boolean isPrime(int n)
int div=2;
while(div*div<=n)
if(n%div==0)
return(false);
div++;
return true;
public static void main (String [] args)
int prev = 1, curr = 1;
System.out.println(prev+": It's a prime number.");
for(int i=0;i<10;i++)
if(isPrime(curr))
System.out.println(curr + ": It's a prime number.");
else
System.out.println(curr + ": It's not a prime number.");
int next = prev + curr;
prev = curr;
curr = next;
1: It's a prime number.
1: It's a prime number.
2: It's a prime number.
3: It's a prime number.
5: It's a prime number.
8: It's not a prime number.
13: It's a prime number.
21: It's not a prime number.
34: It's not a prime number.
55: It's not a prime number.
89: It's a prime number.Edited by: woodie_woodpeck on Apr 26, 2009 3:42 AMcorlettk wrote:
Not what you expected? Or are you saying something about the performance of long arithmetic verses int?No, I thought you posted your method using long's as well. When you implement them both using int's (or long's), the 6-increment should run quicker:
public class PrimeTester {
public static boolean isPrimeInc2(long n) {
if(n < 2) return false;
if(n == 2) return true;
if(n%2 == 0) return false;
long sqrtN = 1+(long)Math.sqrt(n);
for(long i = 3; i <= sqrtN; i += 2) {
if(n%i == 0) return false;
return true;
public static boolean isPrimeInc6(long n) {
if(n < 2) return false;
if(n == 2 || n == 3) return true;
if(n%2 == 0 || n%3 == 0) return false;
long sqrtN = 1+(long)Math.sqrt(n);
for(long i = 6L; i <= sqrtN; i += 6) {
if(n%(i-1) == 0 || n%(i+1) == 0) return false;
return true;
public static boolean isPrimeCached(long n) {
if(n == 2) return true;
if(n < 2) return false;
long[] cache = {2,3,5,7,11,13,17,19,23,29,31};
for(long c : cache) {
if(n == c) return true;
if(n%c == 0) return false;
long stop = (long)Math.sqrt(n);
for(long i = cache[cache.length-1]; i <= stop; i += 2) {
if(n%i == 0) return false;
return true;
public static void main(String[] args) {
long N = 1000000, start = 0, end = 0, repeat = 5;
while(repeat-- > 0) {
start = System.currentTimeMillis();
for(long i = 1; i <= N; i++) isPrimeInc2(i);
end = System.currentTimeMillis();
System.out.println("isPrimeInc2(...) upto "+N+" took "+(end-start)+" ms.");
start = System.currentTimeMillis();
for(long i = 1; i <= N; i++) isPrimeInc6(i);
end = System.currentTimeMillis();
System.out.println("isPrimeInc6(...) upto "+N+" took "+(end-start)+" ms.");
start = System.currentTimeMillis();
for(long i = 1; i <= N; i++) isPrimeCached(i);
end = System.currentTimeMillis();
System.out.println("isPrimeCached(...) upto "+N+" took "+(end-start)+" ms.\n");
} -
I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?
Hi Abdul,
Sorry for my unprecise answer, but you talk about a tcode, but you're using a BAPI Call. Maybe you want to call the transaction in batch mode?
http://help.sap.com/saphelp_erp60_sp/helpdata/de/fa/09715a543b11d1898e0000e8322d00/content.htm
Regards,
Franz -
XML parser error while testing web service client using jdeveloper 10.1.2.1
hi
I have generated a web service stub/skeleton out of the wsdl file using jdeveloper 10.1.2.1.0. The client will return a complex type result, i.e., it will return an array of elements. When I try to run the client using jdeveloper 10.1.2.10 i am getting the following error:
E:\oracle\DevSuiteHome_1\jdk\bin\javaw.exe -ojvm -classpath E:\oracle\DevSuiteHome_1\jdev\mywork\Application2\Project2\classes;E:\oracle\DevSuiteHome_1\jdev\lib\jdev-rt.jar;E:\oracle\DevSuiteHome_1\soap\lib\soap.jar;E:\oracle\DevSuiteHome_1\lib\xmlparserv2.jar;E:\oracle\DevSuiteHome_1\jlib\javax-ssl-1_2.jar;E:\oracle\DevSuiteHome_1\jlib\jssl-1_2.jar;E:\oracle\DevSuiteHome_1\j2ee\home\lib\activation.jar;E:\oracle\DevSuiteHome_1\j2ee\home\lib\mail.jar;E:\oracle\DevSuiteHome_1\j2ee\home\lib\http_client.jar;E:\oracle\DevSuiteHome_1\lib\xmlcomp.jar mypackage2.RESSelectionServiceStub
oracle.xml.parser.v2.XMLElement@11
java.lang.ClassCastException: oracle.xml.parser.v2.XMLText
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:877)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:903)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:928)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.fromElement(WrappedDocLiteralStub.java:621)
at mypackage2.RESSelectionServiceStub.selectParticipants(RESSelectionServiceStub.java:112)
at mypackage2.RESSelectionServiceStub.main(RESSelectionServiceStub.java:43)
java.lang.ClassCastException: oracle.xml.parser.v2.XMLText
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:877)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:903)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:928)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.fromElement(WrappedDocLiteralStub.java:621)
at mypackage2.RESSelectionServiceStub.selectParticipants(RESSelectionServiceStub.java:112)
at mypackage2.RESSelectionServiceStub.main(RESSelectionServiceStub.java:43)
java.lang.ClassCastException: oracle.xml.parser.v2.XMLText
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:877)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:903)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:928)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.fromElement(WrappedDocLiteralStub.java:621)
at mypackage2.RESSelectionServiceStub.selectParticipants(RESSelectionServiceStub.java:112)
at mypackage2.RESSelectionServiceStub.main(RESSelectionServiceStub.java:43)
[Lmypackage2.ProfiledClaimant;@18
java.lang.ClassCastException: oracle.xml.parser.v2.XMLText
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:877)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:903)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:928)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.fromElement(WrappedDocLiteralStub.java:621)
at mypackage2.RESSelectionServiceStub.selectParticipants(RESSelectionServiceStub.java:113)
at mypackage2.RESSelectionServiceStub.main(RESSelectionServiceStub.java:43)
java.lang.ClassCastException: oracle.xml.parser.v2.XMLText
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:877)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:903)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:928)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.fromElement(WrappedDocLiteralStub.java:621)
at mypackage2.RESSelectionServiceStub.selectParticipants(RESSelectionServiceStub.java:113)
at mypackage2.RESSelectionServiceStub.main(RESSelectionServiceStub.java:43)
java.lang.ClassCastException: oracle.xml.parser.v2.XMLText
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:877)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:903)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.getType(WrappedDocLiteralStub.java:928)
at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.fromElement(WrappedDocLiteralStub.java:621)
at mypackage2.RESSelectionServiceStub.selectParticipants(RESSelectionServiceStub.java:113)
at mypackage2.RESSelectionServiceStub.main(RESSelectionServiceStub.java:43)
java.lang.ArrayIndexOutOfBoundsException: 1
at mypackage2.RESSelectionServiceStub.main(RESSelectionServiceStub.java:55)
Process exited with exit code 0.I have googled to see if i can get any solution , i got the following information:
Cannot Generate a Stub or Skeleton for a WSDL that Uses Certain Types (3912349)
JDeveloper 10.1.2 only understands a subset of all of the complexTypes that can be defined in a WSDL document. For example, if the following appear in the "types" section of the WSDL, any use of those types will cause JDeveloper to generate a reference to UnknownType in a stub or skeleton:
• Restrictions of simpleTypes
• complexTypes which define attributes Does that mean that the jdeveloper will not support complex types?Could anybody tell me how to resolve the above said issue? Is there any patch that i can run to resolve the issue?Can i use the client generated using jdeveloper 11g to import into the oracle forms 10g, i.e., form builder 10g. Currently this is the version we have in our office.
-
Lost wifi connection while activation so my installation code is already used... what to do?
Hey there Adobe people!
I have a question about my installation code of the Creative Cloud membership. I've bought it at from a site my school suggests. Later when I received the installation code and download link I began with the activation on my Mac. After the step where I placed my installation code I had to keep my activation of my membership for a longer time. But then my wifi lost connection. I wanted to refresh the page but then the white squares where empty so I had to fill in my installation code again. But it said the code was already used. So I hope you have a solution for this.
Thank you in advance!
Simoneyou need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
To test how can we use the opt 'logical file name' to name the file based
Hi Sir/Madam,
to test how can we use the opt 'logical file name' to name the file based on the selection made in the dtp run for extracting data as flat file.Hi Vishali,
In the DTP select the file location as application server and give the logical file path. The actual file and logical path can be created using transaction "FILE" and "AL11".
Rest of the process is same as that of extraction from local file.
Regards,
Durgesh.
Maybe you are looking for
-
My iphone 4s' screen is broken. I haven't dropped it or anything, or else it must've shown through its physical appearance. It just went into hazy white and green and now i cannot use it. Can i have a replacement for it? Thanks
-
Goods receipt for PO , immediate TO
Experts, We are developing a custom RF transaction GR for PO. During this process I am using BAPI_Goodsmvt_create to create the material document in the back ground.I want to create the transfer order for the material document immediately in the bag
-
What USB Webcam will Work under Lion (Mac Mini)
Only a couple month back, I purchased an "Icecam2" from MacAlley for my Mac Mini. It worked just fine. But Lion doesn't appear to recognize it. Any work arounds? Are there any cameras that do work with Lion? (none of the once I have seen so far state
-
Black screen upon wakeup after longer sleep...
In the last 2 months or so, I have seen my MacMini 2011 OSX 10.7.3 crashing withing a minute of wakeup, after sleeps of more than 2-3 hours. Sometimes the Black screen occurs almost immediately, sometimes it takes up to a minute after the desktop app
-
Functional Specification for Travel Request Workflow
Dear All, EHP6 and 7.3 The standard travel request workflow( WS20000050) is not supporting for my business process. So we are developing custom Workflow. I want write Functional specification. Please provide some information to write functional speci