Making User Input Data UPPERCASE

I am using htmlb and want to know how to make an input field show/receive UPPERCASE data (as user types in the data).
Thanks, in advance, for your help.

you do not have any property in htmlb:inputField for this.
i just implemented what Graham Robbo has suggested in the following example code. check it out .
      <htmlb:inputField id = "IP1"
                         width = "100"/>
      <s cript for="IP1" event=onkeyup type="text/ja vascript">
                  thas.value=thas.value.toUpperCase();
      </s cript>
in the above code change the thas ( 2 occurrence) to this
PS: do reward points to Graham Robbo

Similar Messages

How to display records that match user input date

hi all,
i need to display records that match user input date (i.e., for example if the difference between user input date and record date is less than 5 years then display those records) , this is for hr bw. any exit is there to check for validation for records to be displayed based on some abap coding.
vijay

I just see getApplication method but "Retrieves a list of all the deployed applications."
My scenario is: I get user, end i want to discorver how application this user i enable to see.

Formula variable for a user input DATE value

Hi All,
I want to create Formula variable for a user input DATE value as I need to use it in a formula to compare between user entry date & date in the DSO. Does any body has any idea about it?
I tried to create formula variable with manual entry but then I am not getting DATE option.
Regards,
Sonal

Hi ,
You have to create a formula variable in the formula.
The formula variable in the general tab would have the reference characteristic as your date characteristic on which you have created a user entry variable or on which you intend to create a date entry variable.
Give the proceesing type as replacement path.
Next in Replacement path mention you would replace the variable with value of another variable.
Mention the variable name.(This is the actual varaible created on the selection screen),
Also mention you would replace only from value/to value of the variable.
Check the following help link
[Replacement path type formula variable|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
Hope this helps,
Best regards,
Sunmit.

Adobe form not saving user-input data into saved pdf file

Hi forumers,
I'm a new abap developer and I'm tasked to create an interactive adobe form that will require the user to input data in the form.
No data is passed and received from PDF, but PDF has to be u2018Fillableu2019. I am able to fill out the form but when I actually save the form, it will be saved as a blank form again. I've seen the relevance of the LS_DOCPARAMS-FILLABLE = 'X' on this forum and I have incorporated it in my code. But how should I code the abap program to enable to save the user input as well into the form.
DATA: GV_FMNAME TYPE FPNAME,
      LS_DOCPARAMS    TYPE SFPDOCPARAMS,
      LS_OUTPUTPARAMS TYPE SFPOUTPUTPARAMS.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
    I_NAME                     = 'ZSC_ZRUFORREP'
IMPORTING
   E_FUNCNAME                  = GV_FMNAME
*   E_INTERFACE_TYPE           =
*   EV_FUNCNAME_INBOUND        =
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
    IE_OUTPUTPARAMS       = LS_OUTPUTPARAMS
EXCEPTIONS
   CANCEL                = 1
   USAGE_ERROR           = 2
   SYSTEM_ERROR          = 3
   INTERNAL_ERROR        = 4
   OTHERS                = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LS_DOCPARAMS-FILLABLE = 'X'.
LS_DOCPARAMS-DYNAMIC = 'X'.
CALL FUNCTION GV_FMNAME
EXPORTING
   /1BCDWB/DOCPARAMS        = LS_DOCPARAMS
* IMPORTING
*   /1BCDWB/FORMOUTPUT       =
EXCEPTIONS
   USAGE_ERROR              = 1
   SYSTEM_ERROR             = 2
   INTERNAL_ERROR           = 3
   OTHERS                   = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
*   E_RESULT             =
EXCEPTIONS
   USAGE_ERROR          = 1
   SYSTEM_ERROR         = 2
   INTERNAL_ERROR       = 3
   OTHERS               = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
dgrachee

Not quite yet, I have to say...
If you check the domain "FPINTERACTIVE", you'll see these values:
               Print Form
X     Interactive Form with Additional Usage Rights
N     Interactive Form Without Additional Usage Rights
F
So, you are not providing "additional usage rights" (Adobe Form Credentials), meaning there could be a problem when you want to use those forms in a Production environment.

Save user input data

I would like the ability to have a settings screen and allow the user to enter parameters. These parameters need to be saved even when the program (VI) is shut down. As an example I made a quick simple program, Sample test 1.vi. Here there is input data, amplitude, a maximum setting and a minimum setting. I would like the user to be able to set the settings (maximum and minimum) to the desired level, run the program, stop the program, shut down the program. Upon restarting the program the settings should be at the last entered value. Any ideas or assistance is appreciated. Thanks,Brian
Attachments:
Sample test 1.vi ‏8 KB

Look through the example VIs that ship with LabVIEW. They have examples on working with ini files. I have included an example of the VIs that we use for our applications as well.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot
Attachments:
Application Template-Get Test Specific Parameters From Config File.vi ‏20 KB
Application Template-Save Test Parameters To Config File.vi ‏19 KB
Application Template-Test Parameters.ctl ‏6 KB

APEX4: How to create a report whose data is based on user input date fields

Using Apex 4 I've to create a report that allows the user to input two date and shows a report between the date range.
How can I do this?
Thank you.

This has nothing to do with apex 4.0. If you create a report using this query:
SELECT *
FROM emp
WHERE hiredate BETWEEN NVL (TO_DATE (:p1_date_from, 'mm/dd/yyyy'), hiredate)
AND NVL (TO_DATE (:p1_date_to, 'mm/dd/yyyy'), hiredate)and create two date picker items with names P1_DATE_FROM and P1_DATE_TO (take care of using the right date format), your report will show all records by default and those that match after you fill in the date items.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Custom Exit to count No: of Employee based on User Input Date

Hi There,
I have a requirement to Count the no: of Employees for each Position Id. This count value changes with time (Time-dependent).
So, when the user Keys-in a date at the Query Execution-Prompt, it should take the date value and then count the no: of employees for each Position Id.
Next, it should display text like If Count = 1    "Single"
                                                  If Count =2     "Double"
                                                  If Count >=3   "Triple"
I was informed that we should create a Calculated Key Figure and then introduce a variable in it with Replacement path as Customer Exit.
My Question is: Could any one provide me the logic to implement the Customer Exit for above requirement. I kow that I need to implement this is BI ABAP editor as Include file.
Further, I referred following Forums links. However, I need more information.
counting the number of rows.
Customer Exit Variable Code
Any Suggestions!
- Anil

Hi,
As I understood, first thing you may not have text for a key figure (will not be able to display "Single", "Doüble" etc..)
Are you doing reporting on master data or cube?.
If it is a master data the it will be better to include count at staging level. You just need to include one key figure count as an attribute and assign 1 over there. You may usee this key figure directly in report.
If it is one cube/DSO then just create one CKF assign value as 1 in report in that. Use Exception aggrigation for this CKF reffering Position id in report. Dipslay this key figure.
I hope it will help.
Thanks,
S

How to save user input data in pages into database ?

Dear Friends,
Hello. I am developing my first PeopleSoft application using PeopleTools 8.49 and SQL Sever 2005. In application designer, I have created fields, records, records' underlying tables in database, and pages. After users type in data into fields in a page, we need to click "submit" button in the page and save the data into Database. How to submit data into database ?
If we use JBuilder or Netbean instead of PeopleTools, we simply develope a server side script file like sth.jsp and link it to the "submit" button. The server side script file save data into Database. But in PeopleSoft application designer, I don't understand how to submit data in a page into database.
Can any friends help to solve this question ? Thanks.
Lucy

Hi:
Data will be saved in the database once you click on the 'Save' button on the page or if you use one of the 'Save' functions in PeopleCode (like DoSave(), DoSaveNow()). Generally, there is no need to write a script explicitly. Please refer to PeopleSoft Internet Architechture and PeopleCode peoplebooks (and other PeopleTools peoplebooks as well) for more reference.
You may want to attend PeopleTools training if you are fresh to PeopleSoft development.
Regards,
Sameer.

Passing user input data to existing pdf

My customer prints business cards, currently the printing requests are submitted by a variety of methods (e-mail,paper napkins, etc.) that create more work and consume to much time. When a request is finalized it is in pdf format and at that point ready to go to press.
I am trying to simplify this process by allowing the person that needs a card printed to fill out an online pdf form that looks exactly like their business card. When completed the form is submitted and their info needs to be passed to an existing pdf (also online) that also looks exactly like their business card. This pdf will be submitted for review and approval and used to go to press.
I have been designing/hosting web sites for years but pdf's are new to me. I purchased Adobe Acrobat Professional 7.0.8 and Live Cycle Designer 7.0, I have created both of the pd's described in the 2nd paragraph and used the Designer to build the form, uploaded to server and had the data saved as XML. I am able to import the XML data to the other pdf and it does so beautifully. I did it this way first to familiarize myself with the software. I also purchased a very comprehensive book on Acrobat 7.0 which also covers the Live Cycle Designer to some extent.
I learned that a Java Script would be necessary to accomplish my goal but after scouring the web and submitting my project needs to www.rentacoder.com I have been overwhelmed. The coders that responded were going to use everything except Java Script to achieve the desired results (PHP, Java)and cost ranging from $45.00 to $700.00.
I have downloaded from the Adobe web site the following;
Acobat JavaScripting Scripting Reference
Acrobat JS Guide
I do not write scripts and thought these could help but I can't understand exactly how my script should look.
These are the fields that will be completed by users;
Job Title, Full Name, Address1, Address2, City State Zip, Ph#, Cell#, E-mail Address.
URL to user form -www.tarantulawebdesign.com/bc/twd_form1.pdf
Url to pdf that data will be passed to - www.tarantulawebdesign.com/bc/bc_tmplt.pdf
Any help with my situation will be greatly appreciated!

Hi Steven,
Luckily, you don't even have to write a single line of JavaScript code to get what you want! :-)
Just create a new data connection using an example xml-file. Then bind the form fields to their respective data connection field. Then select iomport xml-data in Acrobat Pro or insert a button (optional) with the following line of code:
xfa.host.importData();
Here's your file, I tuned a bit. You may want to have a look at it:
business-cards.pdf (download via filefactory, which is a bit slow and tricky...).
1) download the file
2) create a new text-document. rename it to something like business-card_data.xml
3) copy & paste the following example business card data:
<?xml version="1.0" encoding="UTF-8"?>
<form1>
<vcard>
<Name>John Smith</Name>
<Position>CEO</Position>
<Address1>Nowhere 1</Address1>
<Address2>Nonsense Enterprises Ltd.</Address2>
</vcard>
</form1>
4) Place both files (pdf, xml) in the same directory
5) open pdf, click the button, select the xml
Regards,
Steve

Use BEx variable for user input data, not to filter.

Hi,
I have a situation where I am displaying notification task data. Each header notif has a number of tasks. These tasks are marked either newest, oldest or no mark (in the middle) for each different task code.
Using VKF's and by passing the user entered variables for newest and oldest I am able to make KF calculations.
So if I have a notif that is like this:
Notif XYZ
Task 1 Code: SCM     Date: 1/1/2000
Task 2 Code: SCM     Date: 1/4/2000
Task 3 Code: SCK     Date: 1/10/2000
If the user selects Newest = SCM and Oldest = SCK
The key figure would use those 2 different notif tasks to calculate.
This works fine.
My problem now is that since the data is displayed at the line level. When the user enteres his choices for task code, BEx will filter to find one single task item that has both the Newest and Oldest values that the user entered. It will return no data.
Example:
NOTIF    TASK      NEWEST     OLDEST
XYZ.........1.......SCM
XYZ.........3..................SCK
If user enteres Newest = SCM and OLDEST = SCK
It will look for one line with both value, returning nothing.
So, I want to simply use the BEx selection screen to pass values to my virtual code (which I already have working)- but I do not want the report to filter on a notification that only has both values as OLDEST and NEWEST tasks.
Is this possible? To deactivate the BEx filtering for two infoobjects thus only passing the user entered values to my CMOD code?
Any help/suggestions would be appreciated.
Thanks in advance,
Brandon

Hi Prakash,
Can you explain what you mean? I know using a text variable would allow me to take the user entry and apply it to the header of a column... but how would it disable filtering on what was entered?
Thx

Date difference calculation with user input variable

Hi,
I have the following requirement in BEx:
The user inputs a date value and I have to calculate the difference between the date entered by the user with the Due Date in the cube, to determine the number of backlog days. Basically, I need to calculate Past Due in number of days. I need to display the Amount due for the Time buckets like 1 -10 days, 11 -30 days.
The report output has to be in the format below:
Columns:
1 u2013 10 days Past Due      $100.00
11 u2013 30 days Past Due    $15.00
Rows:
Customer#
The cube has data from Jan 2005 to June 2008.
For Eg:   User Input Date =   04/30/2008.
It should compare the input date to the due date for each record in the cube.
Any suggestions are appreciated.

Hi Kumar,
We have developed simar reports in our previous projects.
You need to follow the following steps.
1. Create a new restricted key figure globally on Past Due $100. Restriction details I will let you know in the ensuing steps.
2. Create another restricted key figure globally on Past Due $15. Restriction details I will let you know in the ensuing steps.
3. Create a Z varuable on Calday and offset it -1 (use the button next to exclude button).
4.Create another Z varuable on Calday and offset it -10 (use the button next to exclude button).
5. Create another Z varuable on Calday and offset it -11 (use the button next to exclude button).
6. Create another Z varuable on Calday and offset it -30(use the button next to exclude button).
7 Restrict the RKF past due 100$ (defined in sl 1)between the variable range defined in 3 and 4.
8. Restrict the RKF past due 15$ (defined in sl 2) between the variable range defined in 5 and 6
Now drag and drop those two RKF to column and you will get the desired result in C1 and C2 as follows:
Columns:
C1 :1 u2013 10 days Past Due $100.00
C2 :11 u2013 30 days Past Due $15.00
If the above info serves your purpose, please reward me with the point.
Regards,
Subha

How to change date format of user input prompt in infoview.

Hi All,
Every report webi or deski having date field as prompt when viewed in view mode in infoview shows date format as M/d/yyyy h:mm:ss a.
Where this format is stored and how can we change it to dd/mm/yyyy.
Any ideas.
Regards,
Gaurav

Not sure id this helps...
I was up against a similar issue of placing the user input dates, Starting & Ending, into one cell for a reference on each report header. After a few hours of diligence, I came up with a working model that finally worked:
u_StartDateAsTXT=FormatDate(ToDate(UserResponse("Enter Date/Time Shipped (Start):");"MM/dd/yyyy hh:mm:ss a");"MM/dd/yyyy")
and
u_EndDateAsTXT=FormatDate(ToDate(UserResponse("Enter Date/Time Shipped (END):");"MM/dd/yyyy hh:mm:ss a");"MM/dd/yyyy")
The report header has the following function:
=u_StartDateAsTXT + u201C u2013 u201C + u_EndDateAsTXT

How to save User input into DB using webdynpro abap

Hi,
Im trying to create an application using webdynpro abap.
I want to know how to save the data input by user, into a database table.
In my UI, I have a table control which is editable and user inputs data into this. I need to know how i can transfer this data to a DB table.

hello,
u can do it by reading ur context node.
we bind our UI elements to context attributes of appropriate type .
we read their values using the code wizard or by pressing control+F7, click on radio button read node/attribute
here for ur specific case , u must have binded ur table control with the context attribute , now u need to simply read this attribute
eg suppose u have created a context node " cn_table"
reading context node cn_table
   DATA : lo_nd_cn_table TYPE REF TO if_wd_context_node ,
         lo_el_cn_table TYPE REF TO if_wd_context_element ,
         ls_cn_table    TYPE wd_this->element_cn_table.
*   navigate from <CONTEXT> to <CN_TABLE> via lead selection
lo_nd_cn_table = wd_context->get_child_node(
                   name = wd_this->wdctx_cn_table ).
**    get element via lead selection
lo_el_cn_table = lo_nd_cn_table->get_lead_selection( ).
lo_el_cn_table->get_static_attributes( IMPORTING
             static_attributes = wa_table ).
here wa_table is the work area of structure type . u need to create a structure first with the same variables as there are the context attributes in ur node cn_table
in ur
now ur wa_tablecontains value
u can nw use appropriate FM to update , delete and modify the DB table using the value
u cn directly use SQL statements as well in the method of ur view , but direct SQL statements are nt recommende
rgds,
amit

Max date data between the input date range.

Hi
I need to get the maximum date data's with in the date range.
Ex: this is sample date but , total records in DB around 2000.
NAME DATE Product1 Product2
aaaa 01/05/2011 5 5
aaaa 03/05/2011 3 3
bbbb 04/05/2011 6 6
bbbb 07/05/2011 2 2
aaaa 06/05/2011 1 1
case :1) If the user input date is 01/05/2011 to 05/05/2011
then the result should be
aaaa 3 3
bbbb 6 6
case :2) If the user input date is 01/05/2011 to 10/05/2011
then the result should be
aaaa 1 1
bbbb 2 2
so my result is purely based on max date between the input date range.
how to achieve the result

Dhiva wrote:
Hi
I need to get the maximum date data's with in the date range.
Ex: this is sample date but , total records in DB around 2000.
NAME DATE Product1 Product2
aaaa 01/05/2011 5 5
aaaa 03/05/2011 3 3
bbbb 04/05/2011 6 6
bbbb 07/05/2011 2 2
aaaa 06/05/2011 1 1
case :1) If the user input date is 01/05/2011 to 05/05/2011Jan 05 to May 05
or
May 01 to May 05
what date is 07/08/09?

Failed to accept user input when run report on Web

I've testing a report with one input parameter. It's a date with default current date. It is done by using SQL 'select sysdate from dual;' has been added to before form trigger. User is allowed to input any date other than the default sysdate before submitting the report. The report works fine when run in report builder, but it's failed to accepted user input date when called through web browser. The report still uses the current date as SQL parameter rather than user input date.
Can anyone help me to fix this bug?
The report is develped by Oracle 9i and is saved and run in .rdf format.

I created a report with a user defined parameter p_date of DATE type. In the layout model, I created a field with p_date as data source. In the before form trigger, I put
'select sysdate into :p_date from dual;
I run the report through rwservlet:
http://host:port/reports/rwservlet?report=datetest.rdf&destype=cache&desformat=html&userid=scott/tiger@orcl&paramform=yes
In the html parameter form, I change the date from default current date to a future date and that date is shown in the final report.
So I can't reproduce the bug.
One thing you can try it to turn on reports server trace file, see what command line is sent to reports server when you submitting the parameter form.
Thanks,
-Shaun

Making User Input Data UPPERCASE

Similar Messages

Maybe you are looking for