MAN, I hate the labyrinthine way PSE 11 works! "Watch Folder Service" Error

MAN, I hate the labyrinthine way PSE 11 works! Both in the program itself, and in the "support" section. This is so stupid! I just entered my question 5 minutes ago, now I have to enter it all over again. I've been trying to find an answer to my problem for 5 months! It is NOT "faster and easier to find your answer on-line." It is a royal runaround! Aaagh!
When I launch Photoshop Elements 11 - Organizer
1. A box called Elements Organizer comes up, saying it is "Updating." After a long time, it reaches 100%
2. A box called Watch Folder Service comes up, saying: "The Watch Folder Service returned and error: Message Format, Invalid Tag Id."
3. Then Photoshop is completely jammed. I cannot do anything until I use CTRL-ALT-DEL (Windows Task Manager) to shut down PSE.
Get me out of here!

Tou could try a reset this is from the Help system Here
Restore default preferences
Preference settings control how Photoshop Elements displays images, cursors, and transparencies, saves files, uses plug‑ins and scratch disks, and so on. If the application exhibits unexpected behavior, the preferences file may be damaged. You can restore all preferences to their defaults.
Note:
Deleting the preferences file is an action that cannot be undone.
Do one of the following:
Press and hold Alt+Control+Shift (Mac: Option+Command+Shift) immediately after Photoshop Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file.
Go to Edit > Preferences (Mac: Photoshop Elements > Preferences > General), click the Reset Preferences on next launch button, and then click OK. When you restart Adobe Photoshop Elements, all preferences are reset to default settings.
A new preferences file is created the next time you start Photoshop Elements. For information on a specific preference option, search for the preference name in Help.

Similar Messages

What is the best way to work with Word documents in The InDesign CS4???

I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????

It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter

Event in ical on my iphone 4 does not synch with ical on my imac. the other way around works perfect

the other way around works perfect. does anyone has a clue?

I just realized I am having the same problem. All iCal events are on my iMac, but I can only view the last 12 months or so on my iPhone 4s. Searching within iCal or the main Search window on the iPhone give the same results, zero.
So when I am at the doctors and they want to know when my child last saw Dr. SoAndSo, the search on the phone shows zero, when I know this is an annual appointment.
Very frustrating. I hope there is a setting that I've just missed since I got the phone last Fall.

What is the best way to work with AVCHD 720 24p footage in FCE4.1?

Hi I have a Panasonic HMC-150 and I've been shooting 720 24p footage at 21 mbps transfer rate.
I was wondering what is the best way to work with this material in FCE 4.1? I see that in the easy set up menu they only have the option of 1440X1080i at 50 or 60 fps or 1920X1080i at 50 or 60 fps.
Also in the rates drop down menu there is only 50 or 29.97.
So I was wondering which is the best choice for 720 24p footage and will it look alright in any of them? Also is it possible to customize these settings?
And finally can you work with faster transfer rates (21mbps) in FCE?

Yikes, this is going to be tricky since FCE does not support native 24p editing.
The work around for some of us is that AVCHD material that is 24p is often recorded to disc at 60i using telecine, in which case it can be editing at 29.97 frames per second, and then detelecined afterward for final export at 23.98 fps. The problem is that I think your camera actually records real 24p - not 24p packed into 60i. When you import the material from the camera what does QuickTime report the framerate as?

What is the best way to work with mixed media in 1080 timeline?

Hi there,
I have a project shot mostly in 1080 24p but a bit of 720 24p and 4x3 30p footage.
What is the best way to work with this mixed media?
Thanks!
Steven

Hi Shane,
Ok just to recap (thanks for being patient by the way)...I have put some questions in here...feel free to write in caps to respond and we'll put this baby to rest!
1) I will work in a 1080p FCP sequence, correct?
2) HD 1080p footage captured as applepro res hq I will leave as is and work with?
3) HD 720p footage which was captured as applepro res hq. Can I just drop in 1080 timeline and let FCP do its work? Or should i run through compressor, if so what setting shall I submit it too?
4) I dont have a budget for an external hardware to convert SD to HD...should I capture my SD Beta through Final Cut and just leave and let FCP do its work? Or should I run through compressor? If so what setting shall I submit it too?
5) For for my master sequence in FCP am I not using an I-Frame format apple pro res if I am using my apple pro res hq 1080 footage as my formatted sequence? I am not sure what you mean by GOP?
6) I also found some 60p footage 1080p XDCAM compressor shot with the same XDCAM camera. I put in the 1080p 24p timeline but it was pretty choppy...any ideas of this conform?
Thanks very much for all your help it has gone along way,
Steven
Saying what CODECS you are working with was my question. 1080, 720, 4:3...really says nothing. There are a dozen 1080 codecs, another dozen 720 codecs, and nearly 100 4:3 formats.
Best to capture all the footage to one uniform codec.
Second best is to work with one format and let FCP conform the rest to that...IF and only IF that format is an I-Frame format like ProRes. GOP formats as master sequence formats cause TONS of issues.
What I'd do is work 1080 ProRes, just add the 720p footage (Use Compressor to convert it if you didn't have a lot, but if you had a lot, just add it), but I'd capture all the SD 4:3 footage via a Kona 3 or Matrox MXO2 as 1080 ProRes. Hardware conversion of SD to HD is much better than anything FCP can do. AE might do good as well. But then use Compressor to convert 29.97 footage captured (you can't convert 29.97 to 23.98 when you capture) to get to 23.98.

When I am in firefox and I go to google and click on a link, it pops up as something else randomly. The only way it works is by coping the link into address bar

When I am in firefox and I go to google and click on a link, it pops up as something else randomly. The only way it works is by coping the link into address bar. I thought it might be google so I went to bing and it did the same thing. it will not go to the link but instead change to livesearchnow or ihavenet.com
It is really a pain as I search google ALOT. So please someone help. I reset firefox once and even reinstalled it once as well as updated it once. Nothing works.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

What is the best way to work on multiple songs in one long recording?

I often record the local open-mic nights and generally just leave logic recording the entire night so i end up with lots of songs/bands in one big recording.
What is the best way to work with such a recording? Is there a better way than just using the event marker when a new band plays?
Also once i get home id like to save each band to a separate project but i cant seem to find an easy way to do this?
Obviously each band needs a different mix hence needing separate projects? or am i missing a much better work method?
any help greatly appreciated!
many thanks

As for your second point, just do a "save as" new file name and cut and erase any unwanted audio from the arrange window (ie. the bits that aren't in the song you want separate). You can do this for as many songs as there are and create a different mix for each one no problem. You multiple select and drag all the regions to the beginning of the arrange window (make sure you do them at the same time so's they don't go out of synch. All the separate songs and mixes can be saved in the same project folder as the original audio files are stored in (the folder structure should be there already if you started a new logic project, so no need to change that.
I would think using markers so you know where each song begins during the show, and the above method after, would be a very good way of organizing things. You may want to stop actually recording between bands too though I expect you are already doing this.
Its really as easy as that. Sometimes things just are.

What is the proper way to publish standard proxies/services using PI?

Hello experts,
Iu2019m working on a Project where we have an ECC 6.0 and we need to publish some standard services to external third-party applications. We found that the functionality that these third-party applications need is accomplished by the service MaintenanceRequestCreateRequestConfirmation_In of component ESA ECC-SE 603. As we are centralizing all our interfaces in SAP Process Intregration I have installed the ESA ECC-SE 603 XI content in SAP PI. After the installation, in tr. SPROXY transaction of the ECC system I can see the proxy properly implemented and ready to be called. And now I have to configure the interface in Integration Directoy. What I wonder is whatu2019s the best practice to configure this in PI? As I can see in ESR the service category is Inbound but, if Iu2019m not wrong, I have to publish a Outbound service? What should I do? Copy the entire definition to my own Software Component and create my own Outbound service? What is the proper way to publish standard proxies/services using PI?
Thank you in advance.

Using the Page Items to Submit property on the report region, the Refresh action is all that should be needed. I created a copy of page 2 on page 3, removed the Set Value action, and it is working as expected. I don't have access to 4.2.1 to try it on that specific patch level, but I've been using Page Items to Submit with a Refresh DA since 4.2.0 with no problems.

I cant get the itunes store to work , it has a error code when I try to use it, any idea why?

I cannot get the itunes store to work, it has an error code when I try to use it, any ideas?

What error code number are you getting, rodeo?

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
Mylenium

What is the best way to work on the same InDesign file in different locations?

I'm the creative director for an in-house creative department. We produce 37 catalogs and a multitude of print and electronic advertising each year, plus a variety of other items. Our problem is that we have two locations. In the current set-up, if I want someone at one location to work on a project but the files are at the other location, I have someone at the one location package all the materials involved with that project and either upload them to DropBox or copy them to an external drive and ship it. Not very efficient.
We have servers at both locations but there are different files at each location. I'm able to remote from my computer into a computer at the other location, but if everyone were to do that we would need double the number of CC subscriptions and computers, and it would bog down the internet connection that the entire company uses. I'm also connected to the server at the other location (again, over the internet) and have opened InDesign files that reside on the server there and tried to work on them here (over the internet) but that is much slower than remoting in.
The only way I can think of to alleviate this problem is to run duplicate servers at each location, but this would be an update and back-up nightmare (unless I'm missing something). Is anyone operating this same way and, if so, how are you dealing with it?
We can't be the only company that works like this. Maybe I'm just missing something.
Thanks,
Lloyd

We have servers at both locations but there are different files at each location. I'm able to remote from my computer into a computer at the other location, but if everyone were to do that we would need double the number of CC subscriptions and computers, and it would bog down the internet connection that the entire company uses. I'm also connected to the server at the other location (again, over the internet) and have opened InDesign files that reside on the server there and tried to work on them here (over the internet) but that is much slower than remoting in.
One tiny thing bothers me about your setup. And you said it above, you would need double the number of CC subscriptions and computers. Are you using two people to access under the same CC subscription. Even if they are working in two different time zones, it is technically violating the rules and spirit of the rules of being able to install on two machines at the same time.
You're allowed to install for two machines for one person working at the office and then at home. One person wouldn't be in two different locations at the same time.
Meanwhile, regards your problem, I remember reading about a system many years ago that was pretty simple. It was based on an old newspaper/magaizine system of "who has the folder." (Created before computers) In the old days, if someone was working on a file, they left a folder with their name in its place.
In the computer age, one person, working on a file, would move it to their desktop. Then, they would leave an empty folder with that document's name where it had been as well as their initials. So if I took "Shoes and Socks Fall 2015.indd" out, I would leave a folder named "Shoes and Socks Fall 2015_smsc" in its place.
And if it was necessary for me to have the images, I would make a copy of them onto my machine so I wouldn't tax the network. Then when I was finished, I would copy the file back to the server. The links should show up. If not, we could relink later.
With the empty folder on the server, anyone could tell who is working on a project. So if they were late getting it back, you could email them.
It relies on the people being disciplined enough to make the folders, move the docs, etc. But since you've ruled out all the systems for companies with dumb employees, you're going to have to make them follow the rules.

What is the efficient way of working with tree information in a table?

hi all,
i have to design a database to store,access,add or delete(the tree nodes) the tree information. what is the efficient way of accomplishing it?
let's assume the information to be stored in the table is parent,child and type(optional).The queries should be very generic(should be able to work with any database).
anybody has any suggestions?I have to work with large data.
quick response is highly appreciated.
thanks in advance,
rahul

Did you check out this link?
http://www.intelligententerprise.com/001020/celko1_1.shtml
Joe Celko has really gave some interesting way to implement tree in a rdbms.
Best wishes
Anubrata

What is the best way to work with a large amount of data?

Assume you have a big text file to work that you need to store and work with, what would be the best way to do that?
I will be adding / removing a lot of elements so I really want to stay away from array resizing overhead.
I don't want to step on any toes here, but would binary trees / linked lists in C++ be a better solution?

Assume you have a big text file to work that you need
to store and work with, what would be the best way to
do that?Parse it into a database. Then use SQL to manipulate.

What's The Best Way To Work! Local or Remote...

I have been working with Dreamweaver for just about 4 months now, but I'm struggling with finding the most preductive way to work.
Do you work in the local view or remote view.
With local all of the links with images all need to be changed when going live, but this is alot of work having to go through all the images again.
What do you guys do?

If your site is properly defined, you should never need to mess with changing links.
You should be working on local files, then uploading them when they're ready. When uploading, you should be moving files from your Local Root Folder to your Server Root Folder and they should appear with the exact same file structure from one to the other.
If your site isn't set up correctly in DW, you might accidentally be uploading files from something other than root folder to root folder which would cause all kinds of linking issues.
Here is a video with instructions to properly set up a Site Definition in DW...
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/

HT1296 When syncing Outlook on my computer w/my iphone, new events put into my iphone calender did not show up on my computer in Outlook. Is this the only way it works, Outlook to iphone and not both ways?

When syncing my Outlook calender with my iphone calender, only items from Outlook synced. Events I added to my iphone calender did NOT show up on my Outlook calender. Is this the way it works, only one way?

Go to Settings>Mail,Contacts,Calendars>Default Calendar and just confirm that you haven't selected a calendar such as the one listed under On My iPhone (if that's listed), and that your have selected your Outlook calendar here as your default. Assuming you have, if you are syncing your calendar using iTunes (rather than iCloud), you may need to reset your sync history in iTunes. Follow the troubleshooting steps here: http://support.apple.com/kb/HT1692.

MAN, I hate the labyrinthine way PSE 11 works! "Watch Folder Service" Error

Similar Messages

Maybe you are looking for