Managed folder policy will not apply to entire database
Exch2007 sp3
I have run several versions of this pshell command trying to set a MRM policy for a specific Exch2007 database, but the policy is not getting applied…..the mailboxes don’t show the policy
Get-Mailbox -domaincontroller DC.domain.com | Where{$_.Database -eq "mail\sg1\private information store"} | Set-Mailbox -ManagedFolderMailboxPolicy "90day"
When I run this version, it returns info about a corrupted mailbox.
If this mailbox is what is stopping the cmd from completing, is there a parameter to skip bad mailboxes?
Thanks!
Hi,
What's the error/warning of that corrupted mailbox? Since it’s a corrupted mailbox, I suggest to disable this mailbox then run command to apply managed folder mailbox policy.
In addition, just set the policy on DB isn’t enough to see the effects in user’s Outlook. To do this we need to schedule the managed folder assistant to run on a mailbox server
For EMC:
“Server Configuration”->”Mailbox”->locate related mailbox role and right-click it->choose “Properties”
In the “Messaging Records Management” tab->set the running schedule
For EMS:
Start-ManagedFolderAssistant
https://technet.microsoft.com/en-us/library/bb691428%28EXCHG.80%29.aspx?f=255&MSPPError=-2147217396
Document for reference
Managing Messaging Records Management
https://technet.microsoft.com/en-us/library/bb123507(EXCHG.80).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support
Similar Messages
-
Folder Redirection policy is not applied to a user, when the server target is changed.
After server target is changed via group policy, when user login (roaming profile)first time, the the new server target has not been applied, instead it's pointing to the old folder redirection path.
But if we reset the windows profile (roaming ), the new folder redirection works, can you please specify a solutions that the new folder redirection works when the user login for the first time. so it reduce the time on resetting users profile.
it seems that we need to delete the old folder redirection path from the user profile (roaming user profile) via group policy or similar solutions..
Many Thanks> But when the specific users login they all get the same error, it
Is the old server removed from the domain? Seems so - or some other
authentication related issue, hard to tell from here...
> seems that the roaming user profiles still keeps the old server details,
Yes - if you change redirection targets, FR moves content from old to
new, and only if this ends sucessfully, it will update the redirection
target.
Make the old redirection target accessible to the user and you'll be fine.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
HT204074 I see a song in my purchased folder but will not play on iphone after it is synced
I see a song that I purchased from itunes store and is in my purchased folder but will not sync to my phone. it has a greyed out hollow circle next to it and it will not play on phone.
In your summary page scroll all the way down to the bottom and make sure "sync only checked songs and vidoes" is NOT checked. Then go to your music tab to the right of the summary and uncheck music> apply> sync> Re-check sync music> apply> sync.
Hope this helps!!! -
OPatch will not apply the patch, exiting...
Hi,
i have 2 Ebs R12 12.0.5 environment.
i just apllied a patch #6116405 on one system and it was fine. the second system (second ebs R12)
seems like it was skipping 2 main components...and i do not know why.
Would someone please give me an advise.
Thanks in advance
here is the command
$opatch apply
SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.1
SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.0
here is a logfile
Invoking fuser to check for active processes.
None of the patch actions is applicable to the Oracle Home.
OPatch will not apply the patch, exiting...
OPatch succeeded.
Creating log file "/u01/EBTRN/apps/tech_st/10.1.2/.patch_storage/6863699/Apply_6863699_10-03-2008_15-53-46.log"
Starting OPatch Apply session at 10-03-2008_15-53-46.
Command arguments are: apply
OPatch version is: 1.0.0.0.55
The contents of the file: /etc/oraInst.loc
inventory_loc=/u01/EBTRN/oraInventory
Performing RAC pre-req. check...
Accessing inventory ... (retry 10 times, delay 30 seconds each time)
System Command: /u01/EBTRN/apps/tech_st/10.1.2/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/srvm.jar:/u01/EBTRN/apps/tech_st/10.1.2/OPatch/jlib/opatch.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/xmlparserv2.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/share.jar:/u01/EBTRN/apps/tech_st/10.1.2/jlib/srvm.jar" opatch/O2O "/u01/EBTRN/apps/tech_st/10.1.2" "/u01/EBTRN/apps/tech_st/10.1.2/oui" opatch.pl 1.0.0.0.55
Result:
output to OPatch:
NODE_LIST=NULL
NODE_COUNT=0
LOCAL_NODE=NULL
IS_CFS=0
RAC_CODE=0
HOME_INDEX=2
This is not a RAC system
Backing up the rollback script as "/u01/EBTRN/apps/tech_st/10.1.2/.patch_storage/6863699/rollback_6863699.sh_10-03-2008_15-53-47"
Interim Patch ID: 6863699
Checking the patch inventory.
Component Name: oracle.developer.reports.core
Component Version: 10.1.2.2.1
Component Name: oracle.developer.reports.core
Component Version: 10.1.2.2.0
Bugs fixed by this patch 6863699:
6116405 : AS11 CLASSIC - REPORTS MATS RUN HANGS
Reading patch XML files and doing sanity checks.
Read the command to action file map.
Performing initial safety check.
Invoking fuser to check for active processes.
Checking active processes:
Accessing inventory ... (retry 10 times, delay 30 seconds each time)
System Command: /u01/EBTRN/apps/tech_st/10.1.2/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/srvm.jar:/u01/EBTRN/apps/tech_st/10.1.2/OPatch/jlib/opatch.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/xmlparserv2.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/share.jar" opatch/CheckConflict "/u01/EBTRN/apps/tech_st/10.1.2/oui" "/u01/EBTRN/apps/tech_st/10.1.2" opatch.pl 1.0.0.0.55 6863699 "6116405 " /u01/EBTRN/apps/tech_st/10.1.2/OPatch/6863699/etc/config/actions
Result :
SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.1
SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.0
None of the patch actions is applicable to the Oracle Home.
OPatch will not apply the patch, exiting...
OPatch succeeded.There was a bug. even in readme file was asking for Opatch 1.0.0.0.52 and mine was 1.0.0.0.0.55
tech support had told me that i need to upgrade it at least 1.0.0.0.0.57 ans up.I had a suspect in opatch version from the beginning, but did not expect the version to be incorrect in the patch README file -- which I should NOT do next time :)
no wonder my other instance with version 1.0.0.0.0.57 works fine with this patch.
Thanks everyone.Thanks for sharing the solution. -
Apple TV will not play the entire song
I use Apple TV to play music because of the sound system hooked to my HD television. However, I have discovered that Apple TV will not play the entire song if it is long. For example, "Tales From Topographic Oceans" by Yes is one album of six 20+-minute songs. When each track gets about half way through, the system switches to the next track. I cannot find anything in Settings to fix this, either in iTunes on Apple TV. Help?
the newer appletv dont have their own strorage
so they can only access the shared lib of the computer
some computers are set to power saving levels where they will turn off if not used by a real user for X mins
if that happens the shared lib will no longer be avaible to the atv in which case it will not be able to keep playing -
TS1363 my iphone 4 shows up in computer folder but will not connect to itunes
I have unintalled and reinstalled itunes, updated iphone 4 and it still comes up in my computer folder but will not connect to itunes itself says there is an error to connecting help please!
Hey there Jachin W.,
It sounds like you are unable to connect to your home Wi-Fi suddenly on 2 different iOS devices. I would be interested to know if the affected phones are able to connect to a different Wi-Fi connection, but barring that I would use the following article to help troubleshoot the devices and the Wi-Fi connection:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section from toward the bottom if needed:
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
All the best,
Sterling -
Redo log files are not applying to standby database
Hi everyone!!
I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database. I run the following command on the standby database.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
1. How to resolve this issue ?
2.Is it compulsory to have Primary database open ?
3. I have created standby control file by using command
SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should I have different database name for both or existing one is correct ?
Can anybody help me to come out from this stuck ?
Thanks & Regards
Tushar LapaniThank you Girish. It solved my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
I did following scenario.
1. Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
Thanks -
Archive not applying on dr database
Hi All,
Archive log are transferring from primary db to standby db.but archive are not applying on dr database.
Below alert log of dr database
ORA-16037: user requested cancel of managed recovery operation
Fri Jan 14 17:05:40 2011
MRP0: Background Media Recovery process shutdown (QMSSTB)
Fri Jan 14 17:05:41 2011
Managed Standby Recovery Canceled (QMSSTB)
Fri Jan 14 17:05:41 2011
Completed: alter database recover managed standby database cancel
Fri Jan 14 17:07:56 2011
alter database recover managed standby database disconnect from session
Fri Jan 14 17:07:56 2011
Attempt to start background Managed Standby Recovery process (QMSSTB)
MRP0 started with pid=19, OS id=823510
Fri Jan 14 17:07:56 2011
MRP0: Background Managed Standby Recovery process started (QMSSTB)
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 2 processes
Fri Jan 14 17:08:01 2011
Waiting for all non-current ORLs to be archived...
Clearing online redo logfile 1 /oradb/oradata/QMSPROD/redo01.log
Clearing online log 1 of thread 1 sequence number 3401
Fri Jan 14 17:08:01 2011
Errors in file /oradb/oradata/QMSPROD/bdump/qmsstb_mrp0_823510.trc:
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oradb/oradata/QMSPROD/redo01.log'
Clearing online redo logfile 1 complete
Media Recovery Waiting for thread 1 sequence 3401 (in transit)
Fri Jan 14 17:08:02 2011
Completed: alter database recover managed standby database disconnect from sessionHi all,
Dr database query
SQL> select sequence#,applied from v$archived_log order by 1;
SEQUENCE# APP
3401 NO
3401 NO
3402 NO
3403 NO
3404 NO
3405 NO
3406 NO
3407 NO
3408 NO
3409 NO
3410 NO
SEQUENCE# APP
3411 NO
3412 NO
3413 NO
3414 NO
3415 NO
3416 NO
3417 NO
3418 NO
3419 NO
3420 NO
3421 NO
SEQUENCE# APP
3422 NO
3423 NO
3424 NO
SQL> select process,status,sequence# from v$managed_standby
2 ;
PROCESS STATUS SEQUENCE#
ARCH CONNECTED 0
ARCH CONNECTED 0
MRP0 WAIT_FOR_LOG 3401
RFS IDLE 3401
RFS RECEIVING 0
RFS RECEIVING 0 -
Urgent Group Policy Issue - not applying despite saying it does
Thank you for this urgent help. Auditors checking this out tomorrow morning.
We have a GPO that sets the eventlog audit settings for success or failure security events. The scope is set to Authenticated Users.
When I run the group policy wizard in GPMC it shows the settings applying to one of our servers in that OU.
When I run gpresult/z from that server it shows the policy applying to that server.
But when I go into gpedit.msc the security audit settings are all set to "not defined" and they are grayed out so I can't edit them manually.
As a test I set the GPO to deny applying to that server. I ran gpudpate/force on the system and then gpresult and it shows the GPO now not applying. But the settings are still set to not defined and still not editable. they are not being set by any other GPO.
In the event logs I only see three GPO errors but they are unrelated. A separate GPO is having issues creating user accounts. No other GPOs apply.
Quick help would be fantastic.
Server runs on Windows Server 2008 R2 (I can edit GPO but not the domain ones and I don't have access to the domain controllers).OK, After several hours I figured it out. Turns out there's bugs and odd functionality.
If someone ever tested the 'advanced audit settings' (which I did in the same GPO at some point) then it sets a registry key to disable the use of the older basic audit settings. But when you stop using those advanced settings in your GPO it doesn't remove
that registry bit. So I used the GPO to undo that setting. This was the first step. This is found Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options > "Audit: Force audit policy subcategory
settings (Windows Vista or later) to override audit policy category settings" to DISABLED.
Even though this is done, sometimes the GPO files on the domain controllers don't remove the old audit settings. So in the comments of another thread I found out you may have to go to
\\domain-fqdn\SYSVOL\domain-fqdn\Policies\{your-policy-id-where-this-setting-was-originally-set}\Machine\Microsoft\Windows NT\ and delete the Audit folder which is left behind due to some odd bug. If you don't do this even after doing the next step the
next gpupdate will bring that security setting above back down.
Next you have to reset your audit settings on your PC to the defaults. Unfortunately there is no way to do this. Auditpol /clear does not accomplish this. The only way to do this is to take the audit settings from another working system, export them and
then 'restore' those same settings to the affected server. To do this:
1. On 'working system' run cmd.exe as administrator and export the audit settings to a folder like this:
auditpol /backup /file:c:\working-auditpol-settings.txt
2. Copy that file to the broken system such as the C:\ drive and run this on the broken system:
auditpol /restore /file:c:\working-auditpol-settings.txt
Open GPEDIT.MSC and verify the audit settings are back to normal. Computer Configuration > Windows Settings > Security Settings > Local Policies > Audit Policy
Then run gpupdate/force on the formerly broken system. Close gpedit.msc and reopen and verify the settings were not overwritten. If you skipped the sysvol audit folder deletion step they may come back.
Hope this helps someone. -
Mac Book Pro has blinking folder and will not start.
MY Mac Book Pro mid 2010 has the blinking folder and is froze, I have entered into the Internet recovery mode and tried to reinstall OSX system. And in the Disk Utility there is no hard drive to select. What is the next step?
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
FM12: Show/Hide condition does not apply to entire book
FM12: From the Show/Hide Conditional Text pod, Show as per Condition applied to entire book does not consistently update book with correct condition. Now to get the desired condition, I have to apply the condition per section in the book. Has the workflow for this feature changed with FM12? Or is it a bug? Thanks, Patti
> ... I have to apply the condition per section in the book.
No, you don't. You can apply it to all component files in one operation. In the Book menu, select all component files.
View > Show/Hide Conditional Text
{edit}
[ Set ]
As Arnis pointed out, you do need to Update the book for complete re-application of Conditions.
Edit > Update Book
{select all possibly excluding Apply Master Page}
In particular, any Cross-References to conditionalized text will still be as they were until xrefs are updated.
We exclude AMP from Update because it is unstable in FM7, and run it as a separate operation, and re-Update book after that because pagination may have changed. -
Premiere CS6 project manager reports an error and will not manage my project. I have tried several times with both "Create New Trimmed Project" and " Collect Files and Copy to New Location". I have also tried to manage the project with options checked and unchecked (Include Preview Files, Include Audio Conform Files, Rename Media Files to Match Clip Names). Every time I try to manage the project, the process takes a few hours and then gives an error asking me to try again.
The project is 90 minutes long and uses multiple footage formats:
Sony FS100
Sony NEX7
Sony NEX-5n
Canon C300
Canon 5DmkII
Panazonic HVX200
My computer is:
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3
Graphics ATI Radeon HD 5770 1024 MB
Software Mac OS X Lion 10.7.5 (11G63)
Is this a bug, or are there specific things I can do to troubleshoot the problem? I have read of issues with AVCHD. I have confirmed all of my AVCHD folders are intact. Any other Ideas?
THANKS!I have this same problem on a Mac with CS6. I was simple trying to archive a project using the "collect files" option. After five or six hours of troubleshooting (Thanks Adobe) I have narrowed it down to MXF clips that came over in a Final Cut EDL (Projects created in PP with MXF files seem to be fine). In other words, as I was transitioning from FCP to Premiere Pro, I sent four or five projects out of FCP as an EDL, opened them in PP and continued to edit. It seemed to work really well until I attempted to archive my media. If there was a single raw MXF file in the timeline (Not the project panel for some reason) the Project Manager would give me the standard error:"An unknown error occurred during the Project Manager operation. Please save your project and retry the operation.".
I have found two solutions that seem to work, both of which are a pain in the ax.
Option 1: Save the original project file only to an archive folder. Then delete all the old timelines from the project, and save the project with a new name. Create a new timeline and just drag all the raw video and audio into it. (Project Manager needs a timeline of some sort to archive) Then use the Project Manager to archive the modified project. If I need the project in the future, I'll need to open the original PP project and relink all the media from the archived "media only" project folder.
Unbelievably, if you were to take this route and then re-edit the project in the future, it looks like you would run up against the same archiving issue AGAIN next time (At least using CS6). You'd have to go through all the steps above to archive it a second time. Depending on the size of your project, you may want to take option 2 and get the pain over with once-and-for-all.
Option 2: If you only have a couple of MXF files in the timeline (in my case I had mostly renders from AE by the time I was done and THAT raw project had archived in AE just fine) you can export the raw MXF files to another format, then replace the media in your project panel. Finally, use the Project Manager to archive the project like you should have been able to in the first place if Adobe had written the code well in the first place! -
Managed Folder Policy - Missing Emails
We have a Managed Folders policy in place that my boss set up prior to leaving his job. However, a few users have complained that
emails in subfolders of the Managed Folders\Retain Folder have been purged. I don't know if these are user created or system created subfolders. I was under the assumption that anything under the Retain Folder would not be deleted. Emails directly under the
Retain folder are fine. Here is the only code I could find that was saved when the policy was created. Is there an argument that I should be adding? How does the retention of custom created subfolders work?
get-mailbox -resultsize unlimited | where-object -FilterScript {$_.organizationalunit -match "exchange123.foo.com/Exchange Mailboxes/foo/foo"} | Set-Mailbox -ManagedFolderMailboxPolicy retain -ManagedFolderMailboxPolicyAllowed -Confirm:$falseHi,
I suggest getting them back via database recovery.
Since we are going to move to Office 365 and don't want to change managed folder to retention policy, please make a full back up promptly to protect data in time.
Please double check whether the managed folder mailbox policy is configured correctly via following command:
Get-ManagedFolderMailboxPolicy | FL
Please check whether it has Event ID 9017 and 9018, to make sure the MRM working well.
Please check the Managed Folder Assitant service is working well.
Please increas the diagnostic logging level for the MRM, and then monitor the Event in the App log.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?FCPx answer: At least the answer that worked for me...
I had the same problem, as I believe many others had.
In my case the problem was with one of OSX Mavericks' new features: APP NAP.
It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
I just disabled App Napp on FCPx and now it works, again, like a charm.
This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
I hope this helps,
Mariano -
Remote management under Sharing will not allow me to add admin user
I have just imaged my iMac lab to Lion. I am using Apple Remote Desktop 3.5. (I have used it for several years and know how to set it up and use it.) The problem I am having is adding my admin account to the list of users that are allowed remote management through sharing in system preferences.
The user list shows every other account, but will not show my admin account. I have imaged labs each year and have never experienced this issue. Not sure where to go from here. I am able to log in to each of the systems using the missing admin account but can't add that user to authorize remote management as it isn't listed. The sytems have recently been updated to 10.7.4.
For example, I have these accounts:
Me (admin)
User 1
User 2
User 3
User 4
When I go to system prefs>sharing>remote manage and click the Add to authorize only certain users, I only see User's 1-4. The admin account isn't listed...even if I am not currently logged into that account.
*I have just updated to ARD 3.6.I can add "Administrators" under Remote Login just not Remote Management.
Maybe you are looking for
-
Purchased Movies burnt to dvd-r/dvd+r won't play in standalone dvd player
My panasonic dmr ex-77 plays all kinds of discs including the above. Having purchased from the ITunes store, making copies of the movies in both types of dvd, both are not recognised by my panasonic dvd player. I have tried others recorded on the pan
-
Dear Gurus, If some standard SAP field is added in a standard database table as a part of upgrade. Is there a way we can find out when that field is added to the database table. Regards, Subhajit
-
Searching SVC and CDMA Not Available.
Starting earlier today my phone refused to find itself in the service area, I know that the area I am in is covered. I travel a lot for my job and as such I often go through areas that lack service in the great wide open but today my phone did not re
-
Install OWB Runtime user on other DB than runtime repository
hello all Is it possible to install a runtime user on a different database than on which the owb runtime repository is installed? The OWB version we currently use is the 9.2.0.2 version so no Paris feature replies please. I think so but my DBA which
-
If I know the max length of input data, can I know the max length of encrypted output ? (e.g. for storing password in encrypted format, i should know the size of field, if max length of password is known )