Managed System Setup / Configure Diagnostics for Solution Manager itself

Hello,
I'm trying to run the "Managed System Setup" for the Solution Manager itself and
I got a problem in the step 4 (Diagnostics Configuration / Configure Diagnostics):
In the new opened window is only the ABAP stack displayed and the Java stack
is missing.
Does somebody know how to make the java stack visible?
From my point of view seems the configuration of the SMSY ok. The java stack is also
as "relevant" set.
The Solution Manger 7.0 EHP1 is on SP25.
Thanks in advance for your help!
Kind regards,
Joern

Hi Jorn,
I dont think its happening just because of your CR Content.
Still If you want to update it,then go to Administration Tab in SLD->>Import the latest CR Content from there.
As the latest CR Content is :SAP CR Content Version (sld/active): SAP_CR 7.6 (produced 11/17/2011)
And Jorn if you are stucked in the Diagnostic Agent registration then Go to Agent Candidate Administration->>In connection
Parameters Tab go to->>Custom SLD Connection Parameters->>Apply->>Mark the Diagnostic Agent you want to
connect->>Attach->>Give the password of the SMD_ADMIN->>Apply->>This way you will connect to the available Diagnostic
Agent.Hope this will help your problem.
Thanks & Regards
Ajitabh
Edited by: jitu001 on Dec 23, 2011 5:47 PM

Similar Messages

How to configure CTS+ for Solution Manager for XI 3.0

Hi ,
We are working on XI 3.0 SP 20 and Doing a file system based transport of .TPZ files. We observed that there is a possibilit of misssing the objects while tranporting. So we are planning to set CTS+ with our Solution Manager.
Question:
1. Can we configure CTS+ through the latest version of Solution Manager for XI 3.0 landscape?
If Yes .. How? If No... Why?
2. Is there any way to make the the transport automated like ABAP tranports.
If there is.... Please send the link or documents..
Thanks
Manoj

Hi Venkat,
Thank you for the Demo. The Demo gives me information about the CTS+ setup. I am looking for the compatability of CTS+ for XI 3.0.
We have Solution Manager 7.1 setup in place.
Please let us know if we can setup CTS+ on solution Manager (7.01 EHP1) and use it to transport XI 3.0 SP20 IR/ID objects across the XI landscape.
Regards,
Manoj

Required "/" (root) file system size on UNIX for Solution Manager.

Hello SAP Gurus,
   I am setting up SAP Solution Manager 3.2 on HP-UX. It is asking me about 350MB free sapce on "/" file system for Central Instance installation and about 120MB free sapce on "/" file system for Database Instance installation.
   I am installaing everything on to shared disk which mounted under /usr/sap. Why it needs free sapce in "/" file system. Is there any workaround to get rid of this requirement, as I have very less free sapce on "/" file system and I don't want to take the risks involved in increasing this size.
   Are there any SAP recommended sizes for "/" file system?
   I stuck in the middle of setting up SAP landscape on HP-UX (11.23). I searched through the Installation documents but I couldn't find any thing helpful in this regard. It is urgent requirement to set up this so please let me know any solution or workaround ASAP.
   Any help is greatly appriciated.
Thanks in advance.
Regards,
cvr/

Hi Vaibhav.
Normally "canonical path not available for (folder name)" means:
1. Wrong username/password. Please double check you credentials.
2. The resource cannot be linked from the portal server. Please be sure that you can connect to the next ports in windows server from the Unix Server:
a. NetBIOS Session Service TCP 139 This port is used to connect file shares for example.
b. TCP 445 The SMB (Server Message Block) protocol is used among other things for file sharing in Windows NT/2000/XP. In windows NT it ran on top of NetBT (NetBIOS over TCP/IP), which used the famous ports 137, 138 (UDP) and 139 (TCP). In Windows 2000/XP/2003, Microsoft added the possibility to run SMB directly over TCP/IP, without the extra layer of NetBT. For this they use TCP port 445.
I hope these things help somebody.
Best Regards,
Jheison A. Urzola H.

Optimal system setup / configuration

Hello -
Any suggestions / advice on how to optimize my system for running the FCS (version 2 or 3) and possibly obtain real-time editing performance with just simple transitions, titles, color correcting, audio sweetening?
My current setup:
2009 MacPro 2x2.26ghz
16gb RAM
ATI 4870
HDD =
BAY 1 = 640gb = MAC OS
BAY 2 = 500gb/7200/16mb (formatted as Mac x-journal)
BAY 3 = 500gb/7200/16mb (formatted as Win NTFS)
BAY 4 = 500gb/7200/16mb (currently have B/C running Win 7 on this one)
2x24" Monitors
(still researching on getting some decent monitors for audio; currently just using headphones)
What I'll be editing:
VIDEO
- Analogue tape (Hi-8, VHS)
- Digital tapes (Mini-DV shot with XL1 and Sony PD150 cams)
- 5D MK2 files
PHOTOS
- Still photos from P&S cameras as well as the 5D MK2
AUDIO
- Audio (on camera audio, off camera audio like from a H4n type of device, pre-mixed CD's, SmartSound, Soundtrack, GarageBand compositions)
If there is a link to a different thread, website or PDF that has all this kind of info., please post that or those links; much appreciate it.

MartinR wrote:
You have more than enough computing power to do what you said you want to do.
You can do a lot of +user optimizing,+ however -
Learn FCS inside out
Don't use your system HD as one of your scratch disk locations
Keep your HDs under 50% full
Do not run other apps while you are capturing, importing, editing, rendering, exporting or burning
Got it; thanks!!
MartinR wrote:
Set up a Location with network services turned off and use it when you are running FCS
Where do I read up more on setting up a Location? In FCS or in Mac OS?
MartinR wrote:
If you have items in your user account Login Items list, remove them
I noticed I have iTunesHelper listed; but it is checked as hide. Should I just delete it out?
MartinR wrote:
Put all your drives in Spotlight's privacy list so OSX doesn't index them
But if I do this, won't it prevent me from searching for files in those drives?
MartinR wrote:
Backup ... backup ... backup ... did I say backup?
Absolutely...doing this currently.

Print setup configuration (variant) for app

Dear Gurus,
Thru FBZP i have configured the Payment run steps but when i do the payment run in f110 when i do the print job
it is saying that rogram RFFOAVIS: No records selected
Program RFFOAVIS: No records selected
Message no. F0073
Diagnosis
The system did not find any data to be processed in the payment dataset.
Procedure
Check the selection criteria with which you started the payment medium program RFFOAVIS and compare it with the payment list.

Hi Sridhar,
Go to SE38, end enter your program name (RFFOAVIS) and click on execute button. Then select print immediatly button and save it with a variant name.
Now whenever you are using F110, you can (need) to enter this variant name in printout/data medium tab next to RFFOAVIS line under variant. Then you won't get this error.
Hope this will help you.
Pl. assign points if useful.
Thanks

Documentation for Solution Manager 4

Hi all!
Iam going crasy..
At the moment I am just customizing the solution manager 4. In the reference guide section create background jobs they refer to the configuration guide of the solution manager 4. 0 to get a complete list of background jobs for the solution manager 4.0.
Ive downloaded the configuration guide for solution manager 4.0 but there is no information about this. I know the place of documentation on the sap market \solutionmanager.
Did anybody know something more?
Thank you for help!
Best regards
Thomas

Hello Thomas,
Please in spro go to Basic Settings->SAP Solution Manager System->Schedule Background Jobs
The information of this point is more than enough to configure these jobs.
In a previous Configuration Guide you can see:
Periodic Jobs
Periodic Job scenario
REFRESH MESSAGE STATUS used to collect responses from SAP for messages
and Issues sent from the SAP Solution Manager
SOLMAN_ISSUE_STATUS_REFRESH Service Desk
SM:SCHEDULER Solution Monitoring
BTC_CMS_COLLECTOR Change Manager
LANDSCAPE_FETCH Implementation and distribution
CRM_ISSUE_REFRESH Implementation and distribution (testing)
Best regards,
Dolores

DEV, QAS, PRD Systems be monitored in ONE SOLUTION (DSWP)

Hi solman lovers:)
If there any chance to monitor 3 systems: develop. quality assurance and productive in ONE solution?
If yes, please explain what should we do (what's the role of the solution should be and etc...)
Thanks.
Best regards,
Vladimir.

Hi Ivan:
Absolutely, you can.
Refer to the following blog:
/people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
Regards,
Federico

Undocumented configuration parameters for FP2000

I have been looking at the configuration of my FP2000 system, and there are settings that I cannot find discussed in the documentation. In the configuration box for the FP2000 itself, there is a parameter called "pause" that is in msec. What does this do? In the configuration of each of the modules, there is a parameter called "retry count". I have a pretty good idea of what this means, but I would like to see a detailed explanation so I can be sure that I am setting it properly. Can someone please tell me where these are discussed? I have looked through the online help with FieldPoint Explorer, and have read through the pdf manual of the FP2000 itself.
Rich

The Retry Count is a communications parameter, to get it's description (and the description of any paramter in FieldPoint Explorer), you can place the mouse cursor over the paramater and press F1. The description of Retry Count is: The number of times the FieldPoint server retries communication after an error with a FieldPoint device before it terminates a communication transaction.
The description for Pause is: Time to sleep for the bank between its data scan cycle. Set this value (1-1000) to give your embedded LabVIEW RT application more CPU time.
In a more detailed explanation: The Pause setting controls how long the IA Control Environment goes to "sleep". FP-20XX modules have two processes running in them at all times; the IA Control Environment an
d the LabVIEW Run-Time Engine. The processor has to share time/computation power between both processes. By changing the priority levels of VI's or by changing the pause parameter, you can control how much processor time is spent on the LabVIEW engine vs the IA Control Environement. By setting the pause parameter, you can have the IA Control Environemt put itself to sleep for periods of time. The IA Control Environment is the portion of the code that publishes FieldPoint data over the ethernet (e.g. making the FP-20XX publish data like a FP-1600 or FP-1601). By putting it to sleep for periods of time, it will delay reading I/O modules, writing to I/O modules (sent commands are not lost but are queued up waiting for the sleep period to end), and transmitting changed data values.
Regards,
Aaron

Solution Manage Diagnostics - error in the system setup

Hello,
I have installed SMD and I installed one system with the Setup Wizard of the SMD. According to the result of the setup, it was successful.
However, when I do a self check in SMD, I get the five following errors in the Monitored Setup node :
5 error(s) found:
No DB agent autoconfig status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No JVM startup parameters setting status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No Roles assignment status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No SSO Setup status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No Telnet agent autoconfig status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
Can anybody help me ?
Thank you

If you goto http://server:port/smd >>> Diagnostic Setup >>> Diagnostic System >>> Setup Wizard, do you have a message similar to:
Last Diagnostics setup wizard execution on Tue Oct 09 13:34:44 2007 :
- 0 setup steps disabled by user
- 13 setup steps succesfully executed
- 0 setup steps executed with warnings
- 0 setup steps in error
If you do, your Diagnostic server is correctly setup.
For Managed system, same thing, http://server:port/smd >>> Diagnostic Setup >>> Managed Systems >>> Setup Wizard, or check setup results to make sure it's completed.

Managed system Configuration Diagnostics Prerequisites check fail

Dear All,
My solman_setup initial configuration part and basic configuration part all passed without error. And when I do the managed system configuration part , first I choose the solution manager itself and the client 001 to config , and then the maintain connection passed OK , but in the next step , check Prerequisites, it fails. The Navigation Button just open a link to the SAP Service Market Place, and the IMG documentation just let me to see the note 1010428. The deatl part of the execuation result of the Prerequisites open a page but with error statement as below :
Service cannot be reached
What has happened?
URL https://sapsolmgr.centurydsp.com:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding service is not available.
Note
The termination occurred in system SM2 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-https-c:000-u:SAPSYS-l:E-i:SAPSOLMGR_SM2_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Any comment will be appreciated.
Enddy.

Hello Enddy,
This sounds as if you have yet to configure the HTTP services in SPRO or have misconfigured them. Please review your configuration for the HTTP Services as it should resolve your issue.
Please review the diagnostics URL to see if it helps you out:
http://service.sap.com/diagnostics
Also, please review the following SAP Notes which will also guide you through diagnostics and solution manager setup/installation:
1010428 End-to-End Diagnostics
1145779 SAP Solution Manager 7.0 Installation
1163836 Solution Manager Diagnostics required for troubleshooting
Also pay attention to the relevant notes listed on the bottom of these. If you follow these documents, I'm sure you will have your issue resolved.
Hope this helps you out!
Thanks,
Mark

ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeem

Hi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok

Managed System Configuration Error for MDM 7.1 SP09

Greetings, Needed your expert advise. We are getting an error while configuring our MDM Servers (Version 7.1.08.196) in Solution Manager. As suggested in SAP Note 1798643 , I have manually filled the required details and transferred through sldreg.exe to SLD. Now when i try to perform Managed System Configuration, it is throwing the below error. The definition of Technical System '~MDM' is not correct: '~MDM': No Path found in Installed Technical System 'SID~MDM~'. I'm not sure how to manually update the Install Path for our MDM Servers. Since, the data to LMDB is automatically supplied, I might not be able to manually edit anything. Could you please advise if there is any step to solve this issue. Thanks, Haseeb Ahmed.

Dear ,
Haseeb,
I had the exact same problem with MDM managed system setup . I was on MDM 7.1 SP10.
1940337 - RCA template for Solution Manager 7.10 SP10
This note should resolve your problem. This note has the updated template for MDM.
It did for mine
Thanks
Amit

System copy guide for Solution Manager 7.0 SPS15

Hello,
a new hardware is needed for our SAP Solution Manager 7.0 SPS 15. I will install a new SAP Solution Manager and do a system copy from the old hardware to the new one. There is no migration neccessary, because OS and DB will be the same.
Now I'm searching for some informations and guides to do a system copy of a SAP Solution Manager. All I found was a system copy guide of Netweaver 04s SR3/SR2 with informations about Java Usage Types but not for Diagnostics.
Are there any guides or howtos to do a system copy with SAP Solution Manager ABAP+JAVA? Does anyone have experiences and advices?
Kind regards,
Sascha Piotrowsky

> Looking forwards to this event I'm afraid of forgetting some dependencies or configurations which have to be changed also, like SMD-Agents configuration,s trusted connections, wiley introscope, e2e and so on.
Wily is not part of the copy - you will need to copy this "manually". The connections et al must be re-done...
Markus

Service desk configuration for solution manager

hi this ,
sudheer i have configured the service desk configuration on my solution manager system with all satellite system, i have mapped all business partners in my satellite systems to solution manager , and also iam able to see all messages are send by business partners using DSWP transaction, but how to see reply from solution manager sytem to satellite system ( message inbox of satellite system)
can any body tell the configuration of satellite system to see reply message from solution manager ?
thanks and regards
sudheerkoppala@ g ma il .com

>
sudheer koppala wrote:
> sudheer i have configured the service desk configuration on my solution manager system with all satellite system, i have mapped all business partners in my satellite systems to solution manager , and also iam able to see all messages are send by business partners using DSWP transaction, but how to see reply from solution manager sytem to satellite system ( message inbox of satellite system)
> can any body tell the configuration of satellite system to see reply message from solution manager ?
There is no "message inbox" in satellite systems, but you can use the SAP Solution Manager to have a central access to all reported messages.
Configure Work Center "Incident Management" in SAP Solution Manager and grant access for message reporters.
See answers to similar question in accessing the service desk message from satellite system
Best regards,
Ruediger

System refresh for solution manager

Hi All,
Do you think its possible to do a system refresh for solution manager?
Even though we do, wont there be a lot of inconsistencies between satellite system and with new solution manager?
Ideally i need do system refresh of X solution manager to Y solution manager
Thanks
Gopal

Hi,
How about the consistency between your two X and Y systems. Are they in single TMS. Requests properly transported from X to Y? If its positive, then go ahead you can make System Refresh..
Feel free to revert back.
--Ragu

Managed System Setup / Configure Diagnostics for Solution Manager itself

Similar Messages

Maybe you are looking for