Management of LR3.2 Versions on Computer?

Greetings-
I posted this on another thread, but never received a response. Now it seems to have been "lost" in the traffic for that previous thread!
Can someone clear this up for me so that I don't erase/remove the wrong program?
Thanks.
Stephen
Glad to see there's a new update. Haven't tested it yet....but I'm optimistic.
Here's my question....
I downloaded LR 3.2. I notice that it "updated" the original LR3 application on the machine instead of the 3.2 RC version. What should I do now....erase the RC version? And, if so, what is the most effective way to clean that off of my machine?
(Curious...what would have happened had I erased the original LR3 when I downloaded (and started using) the RC version?)
Thanks.
Stephen

If you are happy with the LR 3.2 final version, you can delete the 3.2 rc application ...... there shouldn't be any need to delete any other files.

Similar Messages

Recovery Manager could not restore your computer.

HP G32-301tx Notebook PC LK435PA
windows 7 64-bit
Recovery Manager could not restore your computer.

Hi:
You will either need to see if you can get a set of recovery disks for your PC by reading the info at the link below, or make your own W7 DVD.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
Here's how:
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn as ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

2012 R2 RDS Shadowing from Server Manager - how to view client computer names

Hello,
I have a 2012R2 RDS session based deployment. We have a few generic user accounts for a production environment where a group of users uses the same username to start multiple RDS sessions. This creates a bit of a challenge when support has to shadow one
of those sessions because they all appear with the same name: domain\username. The Connections pane in RDS (Server manager) does not list client computer name, which would be the distinguishing factor. The old version of the RDS console (remote
desktop manager) had this information. Citrix appears to have it as well. Is there a way around this limitation in 2012R2 Server Manager?
Thanks

Hi,
As far as I know, there are two ways.
1. Use the Task Manager. In the Users Tab, you can see the client name.
http://social.technet.microsoft.com/Forums/en-US/1d571c01-69ff-4508-af0f-d7eeecd806b6/forum-faq-how-to-manage-rds-user-connections-and-processes-in-a-rds-2012-deployment?forum=winserverTS
2. Use the Terminal Services PowerShell Module. With the Get-TSSession in PowerShell, we can get the detailed information.
http://archive.msdn.microsoft.com/PSTerminalServices
Hope this helps.
Jeremy Wu
TechNet Community Support

DPM console not connecting . Error- Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345) DPM console not connecting

I am having problem connecting the DPM console to ther server. It gives me following error -
"Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345)"
The server is DPM R2 and the same console is working on one other computer.
Any idea how to solve the problem?
Thanks

Hi
Please make sure you have both versions of Microsoft Visual C++ 2008 Redistributable installed..
Also make sure you have .netframework 2 installed. If you look at the dpm logs it should say what is missing.

HT1386 How do I manage 2 iPhones on one computer?

How do I manage 2 iPhones on one computer? We tried this and ended up with each others numbers and apps. We have our own iTunes ID, it is mainly the music on the computer that we want for the phones. Who has the answer without us getting each others apps & contacts. HELP!!!!

How to use multiple iPods, iPads, or iPhones with one computer

Managing Multiple iPods on One Computer

Can I manage three iPods on one computer? One is an iPod Mini and two are Fifth Generation 80 GB iPods, so I need to be able to have at least two different music libraries due to memory space. (Three would be preferable.) Does anyone know if this is possible? Thank you!
Dell Desktop Windows XP

If you are adding a second or more iPod for your own use, just connect the new iPod to your computer and follow the on screen instructions. It will update from your existing library. Depending on the size of your library and the type of iPod you choose you can have it update all songs and playlists, selected playlists only or you can manage it manually.
If the iPods belong to different people, there are basically two ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library and or user account.
b) Creating multiple user accounts and having separate libraries.
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page:
Loading songs onto iPod shuffle - Windows
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library:
Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out if you need it. You can read about Windows user accounts here:
Using Windows XP User Accounts

How can I manage several ID on my computer, one for my iPhone and another one for the iPad of the family?

Hi everybody
Just have bought an ipad2 and i would like to manage several IDs on my computer (i.e keep my iPhone ID and create another one for the ipad to manage apps for my iPhone (4) and the apps for the iPad).
How can I resetup the iPad to create that new ID on itunes?
Thanks for your help
Jp

If you have separate iTunes accounts for the two devices then you'll need to buy 2 copies of any app that you want on both device - you can't copy or move apps from one account to another (they are tied to the account that bought/downloaded them). If you want to reset the iPad then logout of the account on it (Settings > Store and tap the id on the right-hand side) and then Settings > General > Reset > Erase All Content And Settings will reset it back to factory defaults.
You may want to consider one of three options mentioned on this page http://support.apple.com/kb/HT1495

I am trying to manage my media from the computer but it keeps saying my session has timed out and I've tried it so many times. How can I successfully manage my media?

I am trying to manage my media from the computer but it keeps saying my session has timed out and I've tried it so many times. How can I successfully manage my media?

Hi Valeria07,
We want managing your media to be easy! It saddens me to hear that this is not occuring. Do you receive a specific error message when the browser times out? Have you tried using a different browser?
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

TS1717 While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please :(

While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please

That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions?

Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions

What happens when you try to restore? Error message?

After installing PS and LR newer CC versions, should I uninstall the previous versions? Computer is running extremely slow in those programs.

After installing PS and LR newer CC versions, should uninstall the previous versions? Computer is running ver slow in those programs.

you can uninstall them, but do not need to uninstall them. you should probably wait a few months to make sure all your peripherals and plugins work with the cc 2014 versions before uninstalling cc.

Question on managing two iPods on one computer

Currently, I manage my iPod Nano on my laptop and manage my iPod Video on my desktop computer.
Im now thinking of managing both iPods on one computer. My plan would be to use the same iTunes library for both iPods and whenever the nano is connected, I would have iTunes set to sync only selected playlists and when the iPod Video is connected, have iTunes sync all songs and playlists.
My queston is; if I set it like this the first time each iPod is connected, does iTunes remember this setup the next time each iPod gets connected (i.e., the next time the nano gets connected, iTunes will automacically sync selected playlists and the next time the iPod video gets connected, iTunes will automatically sync all songs and playlists)?

When you use multiple iPods with one iTunes library each can have it's own setting and iTunes will recognise each iPod when it's connected and use the setting you have chosen. If any of your iPods are currently set to update automatically you need to take care connecting to a different iTunes. You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7 installed hold down the Shift + Ctrl keys. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes 7.3 Keyboard Shortcuts for Windows
Once you have the iPod connected to the computer you intend to use you can set the update option accordingly. However just remember that if you did ever want to use the iPods on both computers again you would need to set them to manual update: Using iPod with Multiple computers

Drive appears in device manager but not in My Computer

I just wanted to post a solution that took me about 2 hrs to solve. Issue was, my firewire WD TB drive would be seen, by XP (SP3) on boot camp, in xp's device manager but not in My Computer. My goal was to format this as an NTFS drive for my boot camp files. I was unable to format this in Leopard as ntfs either. I tried installing HD drivers and formatting from leopard as FAT32 (just so Windows would see it) but all failed.
The solution I used was as below. (this would not work if you want to retain data on the drive, I didn't care as I was setting up an old drive and reformatting from scratch). Solution:
- Download free 10-day trial of Paragon's NFTS for Mac.
- Install on Leopard (note app seems sparse after download as if it didn't work) but... then...
- Open Disk Utility, you'll notice more options under Erase>Format Options drop down. Paragon acts like a plugin it seems and gives Disk Utility NTFS format options. Don't erase yet...
- Go to Partition tab, Select 1 partition and the options and select Master Boot Record and partition. (Win XP didn't see my 2nd partition when I did this so maybe it can only see the one). Anyhow create 1 big MBR partition.
- Then, go back to erase if you want and zero out.
Drive should then appear when you restart in XP.
I reformatted here from xp too just to be sure that the drive would be fully xp compatible though not sure this would be necessary.
BTW - I also had a 120GB usb drive with the same issue. For some reason with this one I was able to simply erase as FAT32 from leopard without the Paragon plugin and it showed up in XP. Go figure.

Hi Simnap,
Unfortunately Windows XP can only read hard drives that are 2 TB's or less due to barriers set in place by the age of the operating system and the hardware of that time period, even if its still used now. So you may have to partition the drive into (2) 2 TB's or (4) 1 TB's in order for XP to see it. Mac OS X supports 4 TB and above, just not XP.
Kind Regards,
Sidney S. Ramirez

How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg ‏27 KB

Hello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
    1- Deutsch
   ->2- English
    3- Español
    4- Français
    5- Italiano
    6- Nederlands
    7- Português (Brasil)
    8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much

[Solved] can't enter package management in latest version of Emacs

When I try to do something like 'package-install' or 'list-packages' in the latest version of Emacs, it refuses, complaining:
Lisp error: (void-function package-desc-vers)
package-desc-vers([(0 0 1) nil "Matrix themed Zone mode" tar])
ad-Advice-package--add-to-archive-contents(#[514 "@A\303H\304\305A\306HA\307H A\310H \311\fAG\312V\205*
Last edited by emacsomancer (2014-12-15 15:21:51)

Do you have an older version of melpa in your load-path (e.g. .emacs.d/elpa/melpa-x.x) over-riding the built-in package management in later versions of emacs?
If so, delete the melpa-x.x directory and restart emacs.

I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"

Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIE

This link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman

Management of LR3.2 Versions on Computer?

Similar Messages

Maybe you are looking for