Management Studio Fails when added Integration Services step to SQL Server Agent Job

Hi,
I have two new servers I've setup with Windows Server 2012, SQL Server 2012 SP1, Visual Studio 2012 SP4. I've previously been on SQL 2008 and VS 2008 so this is new to me.
I am finding SSMS is throwing an exception on both machines when i do the following:
1. Go to SQL Server Agent | Jobs
2. Create a new Job.
3. Select Steps and click New Step
4. Change the job type to SQL Server Integration Services Package.
Following error occurs:
TITLE: Microsoft SQL Server Management Studio
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
ADDITIONAL INFORMATION:
The C++ module failed to load.
(DTEParseMgd)
Index was outside the bounds of the array. (DTEParseMgd)
I also find if I take an existing job with SSIS package steps and attempt to edit those steps the same message appears. This issue happens on both my servers as they have been configured almost identically. This doesn't occur when selecting any other job
type.
I've also tried installing cumulative update 8 in a hope that this may fix it but with no success.
As my entire environment is based around SQL Agents running SSIS i'm a little bit concerned, especially since I have some tight deadlines getting these servers running.
I have found nothing relating to this issue. Any help greatly appreciated.
Simon
Below is the detailed error message:
===================================
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
Program Location:
   at Microsoft.SqlServer.Management.SqlManagerUI.DTSJobSubSystemDefinition.Microsoft.SqlServer.Management.SqlManagerUI.IJobStepPropertiesControl.Load(JobStepData data)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.UpdateJobStep()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.typeList_SelectedIndexChanged(Object sender, EventArgs e)
   at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
   at System.Windows.Forms.ComboBox.set_SelectedItem(Object value)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.InitializeStepCombo()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.InitializeData()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.OnInitialization()
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SetView(Int32 index, TreeNode node)
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SelectCurrentNode()
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.InitializeUI(ViewSwitcherTreeView treeView, ISqlControlCollection viewsHolder, Panel rightPane)
   at Microsoft.SqlServer.Management.SqlMgmt.LaunchForm.InitializeForm(XmlDocument doc, IServiceProvider provider, ISqlControlCollection control)
   at Microsoft.SqlServer.Management.SqlMgmt.LaunchForm..ctor(ISqlControlCollection control, IServiceProvider provider)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.editJobStep_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.RunDialog(Form form)
   at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
   at System.Windows.Forms.Form.ShowDialog()
   at Microsoft.SqlServer.Management.SqlMgmt.RunningFormsTable.RunningFormsTableImpl.ThreadStarter.StartThread()
===================================
The C++ module failed to load.
(DTEParseMgd)
Program Location:
   at <CrtImplementationDetails>.LanguageSupport.Initialize(LanguageSupport* )
   at .cctor()
===================================
Index was outside the bounds of the array. (DTEParseMgd)
Program Location:
   at _getFiberPtrId()

Hi,
I hadn't installed CU3 however as a test i tried installing CU4 and this didn't help. Since my first emails i have more issues that have brought a complete hault to the upgrade project.
If i double click on a package to run it manually I basically get the same issue. This means i have no way of running any packages except throught VS.
I've also found that regardless of the order of the software installs it still fails. It's related to SP1 of SQL and SP4 of VS.
I'm on Server 2012. When install in the following order SQL 2012, SQL SP1, VS2012, BIDS, VS SP4 i have no problem until VS SP4 is installed. If i install VS SP4 then BIDS it also fails at the last step. If i install all the VS and BIDS software first, then
SQL then SQL SP1 it fails at the SQL SP1 step.
This means i could actually install everything and either ignore the SQL SP1 or the VS SP4 and i'd be fine however this is not really a solution as i will never be able to patch the software and once live this is very dangerous.
I am still surprised there is no obvious solution to this. I'm only installing MS software on a fresh box and only installing 5 pieces of software (including the SPs). I would have though if this was an issue others would have come across it too.
Has anyone else installed all these components and got them working on the same OS. I believe early on in my testing i installed these in Windows Server 2008 and didn't have the issue.
Regards.
Simon.

Similar Messages

SSIS Package Fails when Scheduled as a SQL Server Agent Job

I have an SSIS package that runs without any problems when executed through BIDS.
However, when I schedule the SSIS as an Agent job, it fails completely or part way through. When it partially runs, the part that it is failing on is a Script Task that moves the source data file to an archive folder (on the same server).
I have tried using my domain account as the owner of the job, then the job fails straight off and I get an error:
Unable to determine if the owner (Domain\MyID) of job JobName has server access (reason: Could not obtain information about Windows NT group/user 'Domain\MyID'
If I change the owner to the 'sa' account , then the job partially runs, but then fails because 'sa' is a SQL account and does not have access to the filesystem.
I have managed to get it to work by using the SQL2008_Local account and granting modify permissions to the affected folders.
My question is - what is the advised way of doing this?
Thanks
Gary

Hi Garyv.King,
When you see a SSIS package fails running in a SQL Agent job, you need to first consider the following conditions:
1. The user account that is used to run the package under SQL Server Agent differs from the original package author.
2. The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
For more detailed information about the issue, please following this KB article:
An SSIS package does not run when you call the SSIS package from a SQL Server Agent job step
http://support.microsoft.com/kb/918760
You can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues.
The following 4 issues are common encountered in the SSIS forum.
1. The package's Protection Level is set to EncryptSensitiveWithUserKey but your SQL Server Agent service account is different from the SSIS package creator.
2. Data source connection issue.
3. File or registry access permission issue.
4. No 64-bit driver issue.
For more information about it, please see:
How do I troubleshoot SSIS packages failed execution in a SQL Agent job:
http://social.technet.microsoft.com/Forums/en-US/sqlintegrationservices/thread/e13c137c-1535-4475-8c2f-c7e6e7d125fc
Thanks,
Eileen

SQL Server Agent Job Failing on Job Step

Hi,
Firstly, apologies if this post has been made in the wrong group. Running SQL Server 2012. I'm attempting to add a SQL Server Agent Job which calls a stored procedure that sends a Database Mail message. The SQL Server and SQL Server Agent
both run under the NT AUTHORITY\NETWORK SERVICE account. The Database Mail service has been enabled, and a public profile created. When running the stored procedure manually, I receive no errors - everything runs as expected and I do receive an
email containing the expected information.
I've created the job, job step, job schedule, attached the schedule to the job, and assigned the job to server, all using T-SQL without error. I've also enabled the mail profile on the SQL Server Agent, and I know that part is working because when
the job fails, I get an email notification of the failure.
I've checked the command text in the job step and parsed it within the SQL Job Step Edit window to confirm, it shows as parsing correctly. However, when I manually run the job itself, I get the following:
Execution of job failed. See the history log for details.
I check the history log and it shows:
[474] Unable to refresh Database Mail profile Database Mail Profile. (reason: ) (Not a typo, the history log shows no reason)
[260] Unable to start mail session.
[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
The command text on the failing job step is as follows:
DECLARE @date [varchar](10)
SET @date = CAST(GETDATE() AS [varchar](10))
EXEC [dbo].[GetExceptions]
@company = 'MyCompany',
@checkDate = @date
With regard to the date value being passed as varchar: This stored procedure is used to check for exceptions against multiple databases on this server (hence the company parameter) via dynamic SQL. I'd much prefer to use proper data typing but this
is the only way I could get it to work.
Does anyone have any suggestions on anything else I could check, or insights into why this is failing? Any help is greatly appreciated!
Best Regards
Brad

I am not sure if this really helps but I would do follow the below steps:
1. make sure sql server agent has database mail enabled(rigt click on server agent--properties--alert system--enable database mail and choose right profile.) and RESTART THE SQL SERVER AGENT.(i know you said it i working, but sometimes, restart the
sql server agent might fix)
2. check agent error log and check if any error messages.
3. run the command text you mentioned in sql server and see if it is working.(i know you said it is working but just to make sure).
4. make sure sql server agent service user has permissions to run database mail in msdb. check this https://msdn.microsoft.com/en-us/library/ms186358.aspx
5. Check the output from select * from msdb.dbo.sysmail_log and if it says anything
6.it does not look like the job log is getting truncated but to make sure, get the job step output to a text file.to do this, edit the job step and on the job step properties click on advanced, enter path to the output file. this will give the complete
output for the step.
Hope it Helps!!

Excel Import Fails in SQL Server Agent Job but not when executed in BIDS

We have a SQL Server agent job that has ran successfully for the past 6 months. It started failing about a week ago. I don't believe anyone installed anything on the server. The proxy account used to run the job is an admin on the server.
I've tried everything I can think of or that I found on searches. I even changed the connection manager from an Excel source to using an Microsoft office 12.0 Access Database Engine OLEDB connection and it still runs in BIDs and not as an agent job.
I also setup my LANID as a proxy account to see if the job would run (checking security) -- and it fails with the same error.   I also made sure the path is
\\server\share rather than a drive letter. Any ideas?
The package is executed in 32 bit mode. The package still runs fine in BIDS (where BIDs is opened on the server) but fails in the SQL Agent job with:
Executed as user: xxxxxx\xxxxxx. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 9:00:00 AM Error: 2014-12-01 09:00:02.46
Code: 0xC0202009     Source: xxxxxx Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE
DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "External table is not in the expected format.". End Error Error: 2014-12-01 09:00:02.65
Code: 0xC020801C     Source: Load File to Staging Excel Source [43]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager
"Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-01 09:00:02.77
Code: 0xC0047017     Source: Load File to Staging SSIS.Pipeline     Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-01 09:00:02.90
Code: 0xC004700C     Source: Load File to Staging SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-12-01 09:00:03.02     Code: 0xC0024107
Source: Load File to Staging      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:00:00 AM Finished: 9:00:03 AM
Elapsed: 2.761 seconds. The package execution failed. The step failed.

I logged on to the server with the account that the SQL Agent runs under and ran the following from a command
line to execute the package:
"D:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe" /FILE
"\"K:\SSIS\xxxxxx\xxxxx.dtsx\"" /CHECKPOINTING OFF
/REPORTING EWCDI /X86
I wanted to see if it was a security issue with the agent account account - but
this ran fine.
I then updated the SQL Agent job to use an operating system command instead
of a SSIS package on the job step. This fails...
The issue is definately with the SQL Server Agent

Sql server agent job failing

Hi, I created a ssis package, that simply transfer an excel sheet into ole db, it works on its own, but when I try to use the sql server agent service, the first step is successful,but the second step of execution is not, but I don't have enough details
to check the problem.
when I check the database , a table is created, with only the column headers, but no rows.
please can some one guide me. cheers.
this was in the error log, i checked, and imake sure the file dtx, or the excel was not opened, but what i dont know is about the file permission
,ssa3,Error,1,USER-PC,ssa3,ssas3,,Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:38:23
Error: 2014-10-23 11:38:23.34
Code: 0xC0202009 Source: Package Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available.
Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "The Microsoft Jet database engine cannot open the file 'C:\Users\User\Desktop\dup.xls'. It is already opened exclusively by another user<c/>
or you need permission to view its data.".
Code: 0xC020801C Source: Data Flow Task Excel Source [2] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009.

You can also create a proxy account in sql agent with required permissions to folder etc and configure it to run the job so that it always works
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SSIS package fails under SQL Server Agent job

Hi All
I have designed a SSIS package to encrypt a file using Cipher (EFS) it works fine from BIDS & Package Execution Utility.
But SQL Server Agent job is failing to do this. I am getting the error as
" In executing C:\Windows\System32\Cipher.exe /e /a C:\Test.txt at "",The Process Exit code was 1 while the expected was 0."
Please help me.
Thanks

Two things that usually come to mind when this happens from BIDS locally to the SQL Agent are
1. Security is not
adequate under the SQL Agent Service Account
Rule the security problem out by setting up a proxy account that you know ahs security to run the needed tasks in the package. Either that or give the service account the permissions needed.
2. 32bit BIDS development and running under a 64bit Platform in your SSIS installation
This can be fixed by selecting run in 32bit more or running the package with the 32bit installed version of DTEXEC found in the Program Files (x86) folder where you installed tools.
Next, setup logging in the package so you get a more detailed error message. Event handlers on the tasks will be much more detailed using the OnError event. you can write that to either a flat file with a data flow in the event handler or simply
insert the event into a table using the ? as the parms. If you need assistance setting that up, here are basic steps for a SQL Server table
1) Select the task and click the event handler tab in BIDS
2) Select OnError event handler in the list
3) Click the enable link and drag a Execute TSQL Task over to the window
4) Create a table in your SQL Server database (create one so you don't litter your user DBs if needed)
5) Open the task and add the connection as needed. Then add this statement
INSERT INTO dbo.TableYouCreated
(PackageName, SourceName, EventInfo)
VALUES (?,?,?)
6) Go to parameter mappings and add 4 new mappings as following
System::PackageName
Input
nvarchar
0
System::SourceName
Input
nvarchar
1
System::ErrorDescription
Input
nvarchar
2
Save and reimport the package and then the event of the errors should insert into the table in detail
Ted Krueger
Blog on lessthandot.com @onpnt on twitter

SQL Server Agent job between 2 instances fails with Error 18456 - Login Failed for user

Hi,
SQL Server version: 2012 EE
OS: Windows 2008 R2 Enterprise
In my server, i have 2 instances, and I am trying to configure a SQL Server Agent job to query one table in Instance A, and insert some modified data in Instance B, both in the same server.
When i execute the job in instance A, i get the following error:
Executed as user: NT SERVICE\SQLSERVERAGENT. Login Failed for user "NT SERVICE\SQLSERVERAGENT". [SQLSTATE 28000] (Error 18456). The step failed.
I have already configure instance A as Master and disabled encryption, by changing the parameter MsxEncryptChannelOptions to 0 in regedit. I've also made my target instance (instance B) as a Target.
What am i missing?
Thanks for your attention and pacience

Hello,
The NT SERVICE\SQLSERVERAGENT (virtual) account is not available on the other as you just mentioned. That is the reason for the login
failed error. Try using a Windows login as the
SQL Server Agent service account in both servers, the same Windows login (not a virtual account), and run jobs as the “sa” account.
http://msdn.microsoft.com/en-us/library/ms345578.aspx
You can also try a proxy account.
http://technet.microsoft.com/en-US/library/ms190698(v=SQL.105).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Schedule a SSRS report as step in SQL SERVER agent

Hi All,
The requirement is that can we schedule a job as a step in SQL Server Agent.
Scenario: I got a SQL Agent job which got multiple steps. Executing SP's, running SSIS etc. The last setp i want to setup is run a SSRS report where it gives the report of all the steps. It is like a summary report.
Is that is possible. If so hw can i achieve it.
Thanks in advance.

You can use rs utility to render reports using below script file
http://skamie.wordpress.com/2010/08/11/using-rs-exe-to-render-ssrs-reports/
and call rs utility from bat file or using xp_cmdshell.
Then include this script as last step in your job.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Visakh, I added you to this list:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/64ad4f52-2fd8-4266-b4a4-5657c8870246/needed-more-answerers?forum=sqlgetstarted
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

SQL Server Agent job fails with error : The package execution returned DTSER_FAILURE (1).

Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.

The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Database Mail Fails For SQL Server Agent Jobs / Maintenace plans - Why ?

Database Mail Fails For SQL Server Agent Jobs / Maintenace plans - Why ?
This has been a very common question I have seen relatedt to Database mail and I thought will post here so if you run into this issue, it could be due to one of the following and also have mentioned below how to get around them. Bottom line is datbase mail works fine with SQL Agent jobs and maintenace plans in SP1 on all platforms.
1. If you see this on 64 bit platform and on RTM build, this is a bug that is addressed in SP1.
2. If you see the below error message, it is known issue and this is because of design that requires SQL Agent to restart, if SQL Agent was started before enabling databasemail and setting a new profile. We are evaluating to change this design of not requiring to restart agent for our future release.
Re: 264] An attempt was made to send an email when no email session has been established
This problem will go away after restarting SQL Server Agent in this case. Thanks,
Gops Dwarak, MSFT

This may be related to the fact that DBMail, by default, shuts itself down after 10 minutes of inactivty. If the mail service isn't running, you won't be able to queue up any mail messages.
There may be a built-in mechanism for addressing this problem, but I found that I can detect this situation and start the mail listener before sending db mail. I use the following in stored procs that need to send email.
You could increase the inactivity period for db mail shutdown from 600 seconds to some larger value.  It might not make sense to do so, since shutting it down releases its resources back to teh system; if your SQL server only sneds mail infrequently, it might be better to start the mail listener on demand. Someone with more experience than I might want to add their two cents' worth. :-)
/* Check the mail engine. Start the service if is is stopped         */
/* -- the DB Mail engine shuts down after 10 minutes (of inactivity) */
/* -- this setting can be changed, but we probably don't need to.    */
DECLARE @rc INT
IF NOT EXISTS (SELECT * FROM msdb.sys.service_queues
               WHERE name = N'ExternalMailQueue' AND is_receive_enabled = 1)
    EXEC @rc = msdb.dbo.sysmail_start_sp
    -- TODO: add handling and logging for any engine start issues

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

Manage SQL Server Agent Jobs

What is the best way to manage SQL Server Agent Jobs?
Requirement: If any job fails I need an entry(log) to be done in a table.
Please use Mark as Answer; if my reply solved your problem. Use Vote As Helpful if a post was useful. |WWW.FACEBOOK.COM/SONNIE.HIM | |+91-9742-354-384 |

Thanks all,
I went through all the links except provided by
Tom Phillips, couldn't open it. The thing is that I know results of a Agent job are stored in a table and I can create a SSRS report too and subscribe it to myself or I can use these system tables as a source for my destination table (as asked in the question)
and create a job to run that code every (so) minutes. But what if the subscription to that report got failed due to network error and what if the job which is managing other jobs, itself fails.
Is there any full proof idea which I can implement. My client has 2008 R2 installed.
I have created an object termed as Alerts_FollowUp which I use for sending SMS to respective owner including me. The idea is to make an entry into a table with job name and status. If it status is failed then via Job name I can pick the owner name and number
stored in my master table and have an entry done in the Alerts_FollowUp. After this using FIORANO I am sending these records to a telecom lease line network which are sending my texts to the respective mobile numbers.
I believe the provided explanation was necessary and sufficient.
Please use Mark as Answer; if my reply solved your problem. Use Vote As Helpful if a post was useful. |WWW.FACEBOOK.COM/SONNIE.HIM | |+91-9742-354-384 |

SQL Server agent job failing to back up database

I have set up a SQL server agent job to back up database on regular basis.. For some reason the back up fails.. Could not find any meaningful info in the logs.. Transaction logs are getting created for the same DB but not the database back up..
The below is my environment..
MS SQL Server 2005 - 9.00.1399.06
Windows 2003 server SP2
Any pointers would be helpful.. I checked the event logs and the agent logs and did not see obvious error.
Thanks

I have set up a SQL server agent job to back up database on regular basis.. For some reason the back up fails.. Could not find any meaningful info in the logs.. Transaction logs are getting created for the same DB but not the database back up..
The below is my environment..
MS SQL Server 2005 - 9.00.1399.06
Windows 2003 server SP2
Any pointers would be helpful.. I checked the event logs and the agent logs and did not see obvious error.
Thanks
NO answer can be provided unless you show us the error message. There can be numerous reasons for backup job to fail. See job history for details please post complete information present in job history.
Check errorlog and note what error message is there at time when the backup job failed. You could find something useful. Please learn how to post question in forum just saying I have a problem will not help both of us.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

HOw to avoid DeadLocks when you schedule a Sql Server Agent Job and calling SSIS packages

Hi All,
I have scheduled 2 packages in in Sql Server Agent jobs .
First job which is having Package 1 executing at 11 AM and where I am inserting the data in the table.
Second job which is having Package 2 executing at 12 AM and where I am updating the data in the table based on the first job inserted records.
When I am executing my first job it taking more time and executing till 12 AM and from 12 AM my job 2 also starting ,so getting deadlocks conflicts because inserting happening from job1 and updating happening from Job 2.
How to avoid deadlocks and fix the issue.
Please Suggest .
Thanks & Regards,
Anand

Hi Anand,
Here is another solution, you can set the Job 2 not to run based on a schedule, and create another SQL Server Agent Job which starts at 12 AM and run with a specified time interval to execute a SQL statement in which you do the following steps:
1. Get the status information of Job 1 using the statement:
DECLARE @i int;
EXEC @i = msdb.dbo.sp_help_job @job_name = ‘Job Name'
2. If the value of @i is 1 which means the status of job 1 is success and current time is, then start the job 2. So, the statement is as follows:
IF @I = 1
EXEC msdb.dbo.sp_start_job @job_name= ‘Job Name’
Regards,
Mike Yin
TechNet Community Support

How to run a SQL Server Agent job step on certain days/frequency

I've a SQL Server Agent job. One of the requirement is that a particular step should only run on certain frequency i.e. Certain Date and time. Any suggestions how can that be done?
GBM

yes
1. Make first step as a Transact SQL step. Keep command as below
IF DAY(GETDATE()) = <Your date value>
AND DATEPART(hh,GETDATE()) = <your time hour)
AND DATEPART(minute,GETDATE()) = <your time minute)
SELECT 1
ELSE
RAISERROR 'Job cant be run at this time'
Then for job step properties set the following properties in advanced tab
This would make sure it will quit the job without executing other core steps untill it reaches the required day and time
You can add more conditions in IF based on requirement like if you want time to be on certain second or month to be particular value etc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Management Studio Fails when added Integration Services step to SQL Server Agent Job

Similar Messages

Maybe you are looking for