Mandate title field in attaching the note in PO-SOOD-OBJDES

Dear all,
                  My requirement is to mandate title field after creation of PO . please help me how can i make SOOD-OBJDES mandate.
regards,
Prashanth Maturu.

Hello Ramesh,
Check your declerations,
In internal table  I_HHEADER , the quantity field is of character type. And in internal table I_HITEM, the field GAMNG is of type quantity. There will be type mismatch.Correct it and see if it works.
Regards

Similar Messages

  • When converting a PowerPoint presentation to a PDF how do I attach the notes?

    I can convert the PowerPoint PDF but the notes are not attached.  What should I do?

    Hi Annie + 13,
    This can not be accomplished through Create PDF but through Acrobat you can add notes.
    Take a look at this screenshot.
    Make sure you have selected the 'Convert Speaker Notes' option.
    Regards,
    Florence

  • Analytics Beta: If we had "Article Title" fields empty

    Hi Shikha,
    This is Q for you :
    If we had "Article Title" fields empty for the folio and then entered those later, we only getting new analytics data bound to those article titles. The older data stays under ::unspecified:: article title.
    Is there a way to run database queries and make changes to the analytics data so it will relate article's unique id to the article title if the the title is not empty? That way the old analytics data will get under proper Article Titles once those are entered.
    Thank you,
    Gennady

    Thank you Shikha,
    We are not a SiteCatalayst user, so only have what available in Analytics Beta. Please don't forget to add some info about use of both Folio Names and Article Titles in Analytics or maybe even chnage Article Titles into required field if the checkbox "I'm planning to use DPS Analytics" is checked. Those just ideas.
    Regards,
    G.

  • The form field arguments.image did not contain a file.

    Hi there,
    I'm getting a strange error with a simple file upload and I
    can't figure it out for the life of me. It's odd, because old code
    I have written before has worked fine in this area, and I really
    honestly can't see where I am going wrong.
    First the error:
    The form field arguments.image did not contain a file.
    The error occurred in
    C:\ColdFusion8\wwwroot\red_roof_rentals\components\query.cfc: line
    37
    35 :
    36 : <!---<cftry>--->
    37 : <cffile action="upload"
    accept="image/jpg,image/jpeg,image/gif" filefield="arguments.image"
    nameconflict="overwrite"
    destination="#getDirectoryFromPath(getBaseTemplatePath())#\properties\">
    38 : <cfset variables.image = "#file.ServerFile#" />
    39 : <cfset variables.thumb = "thumb_#file.ServerFile#"
    />
    I have researched this and found other people have had the
    same problem - although please be aware that I do not beleive this
    to be an issue with whatever version of CF I am running. I have
    still not found an answer.
    I have one template with my form called
    "admin_create_property.cfm". When the form posts it invokes a CFC
    method that uploads the file and inserts stuff into the database.
    However, it dies at the file upload part with that bizzarre error.
    There are only two files working in this:
    admin_create_property.cfm
    query.cfc
    I will write the code out for these so you can see. Please
    see attached code. Please note that I have taken out as much
    irrelevant code as possible (html, doctypes etc etc).
    Any help with this would be greatly appreciated as I am
    absolutley stumped to be quite honest. I've heard people say it
    could be any of the following:
    1 - Need to use enctype="multipart/form-data" - which I DO
    2 - cffile filefield can't contain ## - which it DOESN'T
    3 - Inut type must be file - which it clearly is.
    Please please help, I feel stupid asking about this but I
    need you guys more than ever!
    Kind regards and thanks in advance,
    Mikey.

    I don't get what you mean as this is what I am doing.
    <cfinvokeargument name="image" value="#form.image#" />
    This takes the value of the image file field and passes it to
    the CFC as an argument.
    Am I doing something wrong with this? Sorry for my
    stupidness!
    Thanks for you help, further assistance would be greatly
    appreciated.
    EDIT: Interestingly enough, if I just use the tag on my
    "admin_create_property.cfm" page instead of using the CFC method
    like this...
    <cffile action="upload"
    accept="image/jpg,image/jpeg,image/gif" filefield="form.image"
    nameconflict="overwrite"
    destination="#getDirectoryFromPath(getBaseTemplatePath())#\properties\">
    It seems to upload the image just fine. Why then would this
    not work if all I am doing is simply passing to the CFC the value
    of the "form.image" as an argument so that the file upload can
    happen in my CFC instead of in the calling template??!
    It's really bizzarre.
    Mikey.

  • OM Notable able to capture Approver Rejected comments from the Note field in WF

    Hi,
    Could you see attached image, I need to capture the comments from Approver if it is rejected.
    Any these comments must flow to (Notification from AR).
    Could you let me know how to capture Rejected comments.
    Approver has Note field for providing Rejected comments.
    Thanks

    hi,
    If you want to use digital signatures for each status do the following procedure
    1) Define signature strategy for each status
    2) Select status detail and assign signature strategy
    3) Under 'Attributes' select 'Content version'
    4) Select the 'Status type' as 'Locked'
    Assign a signature strategy to the document status.
    Also the required settings are made under Document Management >> Control data >> Define document type >> Define document status. (You can select any status for which you want digital signature for approval)
    Assign a signature strategy to the document status.
    Save the changes.
    Create DIR
    Once the Document is reached to that particular status it will ask for digital signature. Choose Digital signature (Double click on Enter key).
    if everything is right 
    The Digital Signature dialog box appears. Enter your comment upto 200 words in the text field. Select the individual signature strategy is assigned to you DIR. Put the login id and password.Thus the Digital signature process has been completed.
    If this answer is useful donu2019t forget to award points,
    Thxu2026

  • User Profile Synchronization not displaying Title field correctly

    Hello,
    I've an issue with User Profile Synchronization (SP 2010). The Title field is displaying correctly for most of the users but still there are few user for them the Title field is blank. However in "User Information List" it displays the Title field
    properly for those users. But in Central Administration when I check the User Profiles it's blank.I have already run Full Profile Synchronization few times in Central Administrations. Every time it's shows as successful but still no luck, still the Title field
    is blank for some profiles.
    Can anybody help on this? Thanks in advance.

    Hi ,
    Firstly , I need to verify the followings:
    Whether the title field of user information list is changed if you type a value in user profile page and perform full sync.
    Whether you have upgraded to SharePoint 2010.
    If you have upgraded to SharePoint 2010, you need to make sure the user information list is mapped or connected to AD directly. More information, please refer to the post below:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/926abf50-83a0-4e9c-a4cb-4848fcf4f88d/sharepoint-2010-userprofile-title-field-empty?forum=sharepointgeneralprevious
    If this issue still exists, please create a new User Profile Services Application, and compare the result.
    Here are some similar posts for you to take a look at:
    http://social.technet.microsoft.com/Forums/en-US/0b9b5747-80b2-4a2e-8e8e-c918bc9d6cbd/user-profile-synchronization-not-working-correctly?forum=sharepointadmin
    http://blog-sharepoint.blogspot.in/2010/08/user-information-list-not-synchronised.html
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • "Title" field not showing up in infopath forms

    We have a custom infopath form for submitting requests. It have  a column called "Title" ( the default Title which is the same one, that will show when you create  a new form library)
     The issue which we are facing is that- while we edit the form template in the designer 2010 view, we are not seeing the "Title" column.
    We had scrolled through the fields section and also rules to check if something is working behind, but not.
    Please let me know how to make this "Title" field visible in designer tool.
    Its showing in the SharePoint form library but not  in infopath designer(while editing).
    My blog: http://sharepointr.com - ZedProg Profile

    Hi ,
    Could you provide a screenshot about your issue?
    The list "Title" column could be displayed and customized in InfoPath Designer.
    Please create a new list to customize with InfoPath Designer, see if it's this particular list issue.
    Please make a copy of this problem list, then create a new "Text box" and bind the data source "Title" in InfoPath Designer for a test, see if this could work for you.
    Thanks
    Daniel Yang
    TechNet Community Support

  • Tracking the title field in reports-9i

    hi
    I am working with oracle 9i reports ...here iam designing a template and in the template i need to have a report title as it appears when we make use of a default template ....can any of u tell me how can i track the title field that we give in the report style tab...

    Hi,
    The Report Title field does NOT get picked up from the template file. It is created by the Report Wizard. So what I would suggest is that you don't specify your title in the Report Wizard Style Tab.
    Instead, include a boilerplate object in your template (probably in the Report margin area), and right or left-align it. Once you make your report using this template, you specify the Title manually in the Report paper layout editor, by editing this boilerplate object.
    Navneet.

  • When sending email PO in a PDF attachment, the attachment can not be openen

    Hi all,
    We are trying to send an email with the PO in PDF format.  We got the email but the attachment can not be opened. 
    Error reads: Adobe could not open test.pdf because  it is either  not a supported file type  or because  the file has been damaged (for example , it was send as a email attachemnet and was not  correctly decoded).
    Could any body bring some light?   We know that everything in SCOT is fine because we can email the PO through configuration to the vendor without problem. It is just these extra copies that do not work.
    a) We are modifying our custom Print program to add the code below after closing the form.
    in few words:
    a) We are getting the OTF from closing the form.
    b) Converting the OTF to PDF
    c) Sending the PDF as attachment.
    data: lt_docs      TYPE TABLE OF docs.
    data: pdf_bytecount TYPE i.
    data: begin of pdfout occurs 0,
       tline type tline,
    end of pdfout.
    Ende Formulardruck --------------------------------------------------*
      CALL FUNCTION 'CLOSE_FORM'
           IMPORTING
                result = result
           tables
                otfdata = otf.
      IF RESULT-TDSPOOLID NE SPACE.
        SPOOLID = RESULT-TDSPOOLID.
        PERFORM PROTOCOL_UPDATE USING '320' SPOOLID SPACE SPACE SPACE.
      ENDIF.
      if result-userexit eq 'C' or
          result-userexit eq 'E'.
        retco = '9'.
      endif.
      CALL FUNCTION 'CONVERT_OTF_2_PDF'
        IMPORTING
          bin_filesize           = pdf_bytecount
        TABLES
          otf                    = otf
          doctab_archive         = lt_docs
          lines                  = pdfout
        EXCEPTIONS
          err_conv_not_possible  = 1
          err_otf_mc_noendmarker = 2
          OTHERS                 = 3.
    Creation of the document to be sent File Name
       maildata-obj_name = 'TEST'.
    Mail Subject
       maildata-obj_descr = 'Subject'.
    Mail Contents
       append mailtxt.
      describe table mailtxt lines tab_lines.
      read table mailtxt index tab_lines.
      maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
    Creation of the entry for the compressed document
      clear mailpack-transf_bin.
      mailpack-head_start = 1.
      mailpack-head_num = 0.
      mailpack-body_start = 1.
      mailpack-body_num = tab_lines.
      mailpack-doc_type = 'RAW'.
      append mailpack.
    Move OTF code to structure SOLI form email
    CLEAR solisti1. REFRESH solisti1.
    LOOP AT otf.
      solisti1-line = otf.
      APPEND solisti1.
    ENDLOOP.
    Move pdf code to structure soli form email
      clear solisti1. refresh solisti1.
      loop at pdfout.
        solisti1-line = pdfout.
        append solisti1.
      endloop.
      loop at solisti1.
         move-corresponding solisti1 to mailbin.
         append mailbin.
      endloop.
      describe table mailbin lines tab_lines.
    mailhead = 'TEST.OTF'.
      mailhead = 'TEST.PDF'.
      append mailhead.
    Creation of the entry for the compressed attachment
      mailpack-transf_bin = 'X'.
      mailpack-head_start = 1.
      mailpack-head_num = 1.
      mailpack-body_start = 1.
      mailpack-body_num = tab_lines.
    mailpack-doc_type = 'OTF'.
      mailpack-doc_type = 'PDF'.
      mailpack-obj_name = 'TEST'.
      mailpack-obj_descr = 'Subject'.
      mailpack-doc_size = tab_lines * 255.
      append mailpack.
      mailrec-receiver = '[email protected]'.
      mailrec-rec_type = 'U'.
      append mailrec.
      mailrec-receiver = '[email protected]'.
      mailrec-rec_type = 'U'.
      append mailrec.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
              EXPORTING
                   DOCUMENT_DATA              = maildata
              TABLES
                   PACKING_LIST               = mailpack
                   OBJECT_HEADER              = mailhead
                   CONTENTS_TXT               = mailtxt
                   RECEIVERS                  = mailrec
              EXCEPTIONS
                   TOO_MANY_RECEIVERS         = 1
                   DOCUMENT_NOT_SENT          = 2
                   DOCUMENT_TYPE_NOT_EXIST    = 3
                   OPERATION_NO_AUTHORIZATION = 4
                   PARAMETER_ERROR            = 5
                   X_ERROR                    = 6
                   ENQUEUE_ERROR              = 7
                   OTHERS                     = 8.
    ENDFORM.

    Dear Monica,
      You need to configure the system with respect to functional point of view and need to write the following code in print program. i have done this and solution is as follows.
    <b>  Reward me for this solution.</b>
    Process 11 (MM)     Sending RFQs and POs to vendors directly from the system instead of sending thru Courier or Fax     
    Existing Process (AS-IS)     Presently system is not supporting this requirement
    Business Requirements     RFQ’s to be linked with vendor master with e-mail to send enquiries directly through system instead of courier/fax. Vice versa P.O’s.  Specifications, drawings should also go to vendor along with mail.
    To-Be     
    Configuration Settings:                  
    1) Spro – Materials management – Purchasing – Messages – Output control – Message types – Define message types for RFQ/ PO
    •     Created ZEK1,ZMI and ZEK2 for RFQs
    •     Created ZIK,ZOC,ZOK,ZOM,ZSI, ZSK2 and ZSM for Pos
    •     The above New output types Included with existing Print Forms and Programs but modified with External send(5) medium, and added company’s letter head thru ABAP developments (details provided below)
    •     The above new output types also maintained for Fine- tuned control (thru same navigation) for New(1) and Change(2) operations
          2) Spro – Materials management – Purchasing – Messages – Output control – Message   determination schemas – Define message schema for RFQ/ PO
    •     Maintained the new output types in the control data
    3)     Maintain Condition records for the New out put types (copied same document types from the existing old output types)
    Easy access – Logistics – Materials management – Purchasing – Master data – Messages – MN01 (for RFQs)/ MN04 (for Pos)
    4)     Maintain Email id of Vendor in Vendor master.
    Developments (ABAP):
    1)  Copied the existing print programs and forms of the corresponding out types.
    2) Addition of header window in each corresponding form (HEADER window). Uploaded the HEADER3 graphics in the header window.
    INCLUDE HEADER3 OBJECT GRAPHICS ID BCOL LANGUAGE EN
    3) Added the the following code in TOP includes
                       TYPE-POOLs szadr.
               INCLUDE:  LMEDRUCKF09.
    data: intnast         LIKE snast,
          lvs_recipient   LIKE swotobjid,       "Internet
          lvs_sender      LIKE swotobjid,       "Internet
          lvs_comm_type   TYPE ad_comm,
          lvs_comm_values TYPE szadr_comm_values,
          p_retco         TYPE i.
    5)     Addition of the perform to SOS include for header window display
           PERFORM WRITE_FORM_HEADER.
    *&      Form  WRITE_FORM_HEADER
          text
    -->  p1        text
    <--  p2        text
    FORM WRITE_FORM_HEADER.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
       ELEMENT                        = 'HE1'
       FUNCTION                       = 'SET'
       TYPE                           = 'BODY'
       WINDOW                         = 'HEADER'
    IMPORTING
       PENDING_LINES                  =
    EXCEPTIONS
       ELEMENT                        = 1
       FUNCTION                       = 2
       TYPE                           = 3
       UNOPENED                       = 4
       UNSTARTED                      = 5
       WINDOW                         = 6
       BAD_PAGEFORMAT_FOR_PRINT       = 7
       SPOOL_ERROR                    = 8
       CODEPAGE                       = 9
       OTHERS                         = 10
    ENDFORM.
    6)     In the corresponding FORM include the following code has been added.
    DATA:  lvs_comm_type     TYPE   ad_comm,
            lvs_comm_values   TYPE   szadr_comm_values,
            xprogramm         type   sy-repid.
      ... use stratagy to get communication type
          CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
               EXPORTING
                    strategy           = nast-tcode
                    address_number     = lfa1-adrnr
               IMPORTING
                    comm_type          = lvs_comm_type
                    comm_values        = lvs_comm_values
               EXCEPTIONS
                    address_not_exist  = 1
                    person_not_exist   = 2
                    no_comm_type_found = 3
                    internal_error     = 4
                    parameter_error    = 5
                    OTHERS             = 6.
          IF sy-subrc <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    convert communication data
          MOVE-CORRESPONDING nast TO intnast.
          MOVE sy-repid           TO xprogramm.
    7) By using the function module we can get sender and reciepient mail ids to variables lvs_recipient    lvs_sender
          CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
               EXPORTING
                    pi_comm_type              = lvs_comm_type
                    pi_comm_values            = lvs_comm_values
                    pi_country                = lfa1-land1
                    pi_repid                  = xprogramm
                    pi_snast                  = intnast
               IMPORTING
                    pe_itcpo                  = itcpo
                    pe_device                 = xdevice
                    pe_mail_recipient         = lvs_recipient
                    pe_mail_sender            = lvs_sender
               EXCEPTIONS
                    comm_type_not_supported   = 1
                    recipient_creation_failed = 2
                    sender_creation_failed    = 3
                    OTHERS                    = 4.
          IF sy-subrc <> 0.
          Avoids cancellation with message TD421
            p_retco = '1'.                                           "831984
            PERFORM protocol_update USING '740' space space space space.
          dummy message to make the message appear in the where-used list
            IF 1 = 2.
              MESSAGE S740(me).
            ENDIF.
            EXIT.
          ENDIF.
          IF xdevice = 'MAIL'.                                       "885787
        Check validity of email address to avoid cancellation with TD463
            CALL FUNCTION 'SX_ADDRESS_TO_DEVTYPE'                    "831984
              EXPORTING
                recipient_id            = lvs_recipient
                sender_id               = lvs_sender
              EXCEPTIONS
                err_invalid_route       = 1
                err_system              = 2
                OTHERS                  = 3.
            IF SY-SUBRC <> 0.
              p_retco = '1'.
              PERFORM protocol_update USING '740' space space space space.
           dummy message to make the message appear in the where-used list
              IF 1 = 2.
                MESSAGE S740(me).
              ENDIF.
              EXIT.
            ENDIF.
          ENDIF.
    8)     Attaching the new print program and form in NACE transaction.
    Steps for End user:
    1)     Creating the Purchase Order or RFQ with suitable document type through ME21N or ME41 .
    2)     Executing the transaction ME9F and in selecting the suitable output type.
    3)     Executing the transaction ZSEND_PDOC using INT as input.
    4) With above steps we can able to send purchase order or RFQ to vendor as an attachment through e-mail in PDF format.
    Regards
    Badari

  • TS2530 When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

    When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

    The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
    PLEASE HELP!
    -Old Appel

  • Field BSEG-MANST. does not exist in the screen SAPMF05L 0301 in mass update

    Hi,
    I am trying to perform a mass update of dunning data (level and date) on some open items. Using the mass change function through FBL5N, I receive the error message, and the update is not performed. I cheched with the layout editor, but the fields appears in the mentioned screen. The field is also allowed for modification in customizing, for the company code. I was not able to find the dunning fields in the field status editor, in customizing.
    Any hint?
    Thanks
    Massimo

    thanks, but it doesn't apply.
    More relevant is note 322163 Line items: mass change 'Payment Method' BSEG-ZLSCH, but this refer to a program error, our release is more recent, and, furthermore, the dunning fields aren't available for change in FB02.
    Regards, Massimo

  • In mail, my attachments, both photos and documents appear in the body of the message.  How can I get my attachments to appear as a separate attachment and not as part of the message.  Thanks for your help, Karen.

    In mail, my attachments, both photos and documents, appear in the body of the message.  How can I get my attachments to appear as a separate attachment and not as part of the main message????  Thanks for your help, Karen.

    softwater wrote:
    ...and costs $14.99
    Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
    As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
    In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
    If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
    I completely agree.

  • The contained field name "ADTAGR" does not exist in any of the database tab

    hı all
    how can l  solved thıs problem
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
    not caught in
    procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An Open SQL clause was specified dynamically. The contained field name
    "ADTAGR" does not exist in any of the database tables from the FROM clause.
    Information on where terminated
        Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
        The main program was "ZQMR_BILDIRIM ".
        In the source code you have the termination point in line 732
        of the (Include) program "SAPDBZQNQ".
    Error occurred during batch input processing
        The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
         occurred in
        procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
         declared
        in the RAISING clause of its signature.
        The procedure is in program "SAPDBZQNQ "; its source code begins in line
        715 of the (Include program "SAPDBZQNQ ".
    FORM put_qmfecat.
      DATA: l_tab_fields  TYPE  rsfs_tab_fields.
      DATA: l_ds_clauses  TYPE  rsds_where.
    Dynamische Feldselektion
      MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
      READ TABLE select_fields WITH KEY l_tab_fields-tablename
                                    INTO l_tab_fields.
      IF sy-subrc <> c_rc00.
        CLEAR l_tab_fields.
      ENDIF.
    Dynamische Selektionskriterien
      MOVE 'QMFECAT' TO l_ds_clauses-tablename.
      READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
                                 INTO l_ds_clauses.
    DB-Zugriff
      >>>>> SELECT (l_tab_fields-fields) FROM qmfe
      INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
       WHERE qmnum  =  rqmqmel-qmnum
       AND kzloesch =  space
       AND (l_ds_clauses-where_tab)
       ORDER BY PRIMARY KEY.
    regard sinan
    Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
    Edited by: eyup_sinan on Jan 6, 2012 3:30 PM

    You seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
    Rob

  • I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved

    I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved to emails. Help! How do I get my iPhoto back?

    Thanks, Sig.
    The old computer is a 2.6 Ghz Intel Core 2 Duo
    The new one is a 2.3 GHz intel core i7
    In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem.  Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page.  Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
    If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them. 
    (I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

  • How can I reliably search the "Notes" field in iOS?

    I know this isn't strictly an Applescript question, but I've found that the level of knowledge in this particular section of the boards is WAAAAAYYY higher than other sections, so I'm gonna ask this here anyway. FWIW, it does involve AppleScript....
    So I really miss the Palm style contact search by first initial and last name. So I wrote an applescript that runs nightly on my iMac and updates any new contacts to include this search term in the notes field. Actually, to be completely honest, some members of this forum wrote most of the script for me.... Anyway, for instance, Joe Smith has "JSmith" placed into the notes field.
    Now, usually when I search my contacts like this on my iphone it works like a dream. But sometimes the expected contact does not appear. In those cases, if I open the contact a different way (by searching for "Joe Smith," for instance, I find the contact, open it up, and always find that "JSmith" is actually in the notes field. My Applescript is working like clockwork... that's not the problem. Once I close the Joe Smith contact and retry the "JSmith" search, it now works. What gives?
    It's kinda like Spotlight is using a search index for the notes field but not the name itself? And the search index is not getting updated until I manually open the contact? But only on some contacte? Usually it updates itself just fine without my having to open the contact? And then today it failed to find a contact that has had the Palm-seach term in the notes field for at least three weeks. Once I opened it manually, though, it worked.
    So... help! Is there a way to force the iphone to manually rebuild whatever database spotlight is using to search the notes field? What's going on?

    I've turned on BOLD TEXT and turned on REDUCE MOTION but for me it feels like more than just the zooms in and out... I'm getting sick just reading emails and texts or just glancing at the lock screen. It's intant nausea. The only thing I can think of is that it's something to do with refresh rate or frequency of the screen.
    I thought I'd just get used to it but it has not subsided. I only hope I don't have to resort to backgrading to iOS 6 or worse, moving to a different brand of phone.

Maybe you are looking for