Mandatory UI properties not working

Hello All,
I had tried to create an Determination in my node for dynamic propertychange.
   With no check box is chosen in the Request, Read & write Node.
   Node Category Assignment Before retrieve.
   With Node Property change trigger as Update.
By doing this , While updating the node , the determination is fired and execution is coming to the determination but My mandatory UI properties is not set with set_attribute_manadatory. But set_attribute_read_only is working fine.
Can you tell me what is the reason?
Currently our system is with this configuration- WEBUI 731 package 5.
Regards,
Partha

Hello Partha,
"mandatory" can have two different semantics (either mandatory at save or mandatory for each single modification). Thus there is no inbuilt BOPF logic to validate this property - but that's the reason for the library validation mentioned above which can be either configured for save or for each modification - depending on your use case. By the way: That validation evaluates the mandatory properties set by your determination.
In case of readonly there is only one single semantic (to display the attribute readonly). That's why this logic is automatically validated.
Best regards
Tilmann

Similar Messages

Organizer properties not working

I have Windows 8.1 installed and I am using the test version of Photoshop 12 and Premiere Elements 12.
Whenever I try to change something in the Properties of the Organizer I get to the message Organizer
is not working any longer and will be closed. Is this because I am using the test version ??

After making a search click the show all button - to start a new search.
Two stars and lower will give you all photos tagged with one and two stars
To find items which are unrated - click the menu Find à By Details (Metadata)
Set the criterion to zero.

Link properties not working

can anyone see why none of my mouse overs, link colors etc
are not working?
.homepagebuttons {
font-family: Arial, Helvetica, sans-serif;
font-size: 18px;
color: #CC9966;
.homepagebuttons a:link {
color: #669933;
.homepagebuttons a:visited {
color: #669933;
.homepagebuttons a:hover {
color: #FF6600;
.homepagebuttons a:active {
color: #669933;

Well, of course. Your CSS says to find a container with the
class
.homepagebuttons, and to style any links in it. Had you
wanted to style
links with the class .homepagebuttons, your CSS should be -
a.homepagebuttons { ... }
not -
.homepagebuttons a { ... }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mike" <[email protected]> wrote in message
news:f0abva$8fd$[email protected]..
>
> "Joe Makowiec" <[email protected]> wrote in
message
>
news:[email protected]..
>> On 20 Apr 2007 in macromedia.dreamweaver, Mike
wrote:
>>
>>> can anyone see why none of my mouse overs, link
colors etc are not
>>> working?
>>
>> Not without context. We'd be guessing. Post a link?
>>
>> --
>> Joe Makowiec
>>
http://makowiec.net/
>> Email:
http://makowiec.net/contact.php
>
>
>
> Hmm found it.
>
> If i add the hyperlink after ive applied the CSS style
to the text it
> works
>
> Works - <a
href="/index2.htm">
>
> Doesnt work - <a href="/index2.htm"
class="homepagebuttons">
>
> Not sure why it makes such a difference. I made sure the
css styles were
> in the right order in the style sheet LVHA
>

OS X deployment.config and deployment.properties not working?

I have a deployment.config file at: /Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home/lib/deploy/deployment.config with the following contents:
deployment.system.config.mandatory=false
deployment.system.config=file\:/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home/lib/deployment.properties
The deployment.properties file is located at: /Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home/lib/deployment.properties with the following contents:
#deployment.properties
deployment.macosx.check.update.locked
deployment.macosx.check.update=false
deployment.expiration.check.enabled.locked
deployment.expiration.check.enabled=false
None of this is working. Do I have the wrong directories or syntax somewhere?
The documentation at : System- and User-Level Properties says that the deployment.config file will override user settings when placed at ${deployment.java.home}/lib/deploy/deployment.config.
It seems like the deployment.config file is being ignored completely. I am working with Java 7u40 and higher. Nothing seems to do it.
Any help would be appreciated!! Thanks!

Yeah, it only happened to me in the last couple days, so I'm not sure what's happening (latest OS and latest version of Logitech Control Center (but a somewhat old MX Revolution)). Logitech's software is notoriously flakey on Macs, so I'll just chalk it up to that

"Click To Change All Properties" Not Working In Dreamweaver CC For Padding/Margins

Every time I try to use the "Click To Change All Properties" option in Dreamweaver CC (the chain link icon in the middle of the Magin/Padding box), it never seems to work. Nor does it use the CSS shorthand, it lists the top, bottom, left and right margins/padding separately no matter if I have the chain link icon connected or broken. If I have it set to link all four sides, then enter a value into the top, nothing happens to the other sides. It's not until I enter a value in to the bottom that it auto fills in the other two sides. Anyone else having this issue?

Thank you for your help. I think I figured out what I might have been doing wrong when setting the margins. I would first clickt the chain icon to join everything, then enter in a value in the Top box, but I wouldn't see the other boxes update with that same value, so I would immediately click the Bottom value box. Instead, if I just click on the inner white box, just outside of the perimeter of the chain icon, it updates all of the remaining values.
The shorthand setting worked as well for the Padding/Margins. Thank you!

Boot.properties not working in SOA 11g environment (Enterprise Linux)

I need to get this working because I want an unattended start-up of the Managed (SOA) server.
Here's the problem...
The Administration server script ($MW_HOME/user_projects/domains/base_domain/startWebLogic.sh) runs perfectly. I am not prompted for a username or password.
The installation gives me two (different) scripts of the same name - startManagedWebLogic.sh
One of these scripts is in $MW_HOME/wlserver_10.2/common/bin. I've ignored this one. The 2nd one (the one I'm using) is in $MW_HOME/user_projects/domains/base_domain/bin
The proper (single) location of the boot.properties file is unclear to me. I have placed two copies of the identical file (two files - not a link) in $MW_HOME/user_projects/domains and $MW_HOME/user_projects/domains/base_domain
Each file looks like this:-
# Generated by Configuration Wizard....
username=weblogic
password=welcome1
If I run startManagedWebLogic.sh from a terminal, I am prompted for username and password.
I enter the username (weblogic) and password (welcome1) and the SOA server starts.
In the unattended mode, the invocation is (effectively) this:-
nohup startManagedWebLogic.sh soa_server1 >mwl.log 2>&1 &
In this case an exception is thrown (weblogic.security.SecurityInitializationException)
It seems quite clear to me that the boot.properties file is being ignored either because there is some configuration value that indicates that it should not be used or, more likely, it's in the wrong place!

During start up of the managed server, it looks out for the boot.properties within the server root directory by default. Hence you should put your boot.properties file in the Managed Server root directory.
That may be in your case : $MW_HOME/user_projects/domains/base_domain/servers/ManagedServerName/ Directory.
Or else you can specify the location of the boot.properties files using the following parameter:
-Dweblogic.system.BootIdentityFile=filename
where filename is the fully qualified pathname of a valid boot identity file.
To specify this argument in the startManagedWebLogic.sh script, add -Dweblogic.system.BootIdentityFile as a value of the JAVA_OPTIONS variable. For example:
set JAVA_OPTIONS=-Dweblogic.system.BootIdentityFile=C:\BEA\user_domains\mydomain\boot.properties
Thanks,
Sandeep

Download/Upload and Properties not working with Netstorage

I had applied some authorized updates to a SLES 11, SP2, (OES 11.1, PATCHLEVEL=1) running eDirectory 8.8 SP7, server and rebooted a week ago.
I didn't notice anything wrong initially and thus was living in stupid comfort! :O
I was able to get to the Novell "Welcome" web page, and I can get into iMonitor and Remote Manager, but when I try iManager, I get "Error 503 Service Unavailable".
After looking and trying various postings in the Novell forum unsuccessfully, I loaded iManager on a Linux Desktop and I am working with that, but I can't help think that is somehow related to my netstorage problem.
I am able to successfully login to netstorage and I can navigate around to folders OK.
Local users have a mapped drive and they are working OK with the nss volume.
However, then I log in as admin and select a folder and choose Properties, I get "Error 500 Server Error" and if I try it again after that I get "Error 503 Service Unavailable"
And, when anyone tries to use the other options, such as Upload or Download, nothing happens.
I verified that Apache2 is running and that tomcat6 is running.
Below is the catalina.out file for chucks-n-giggles.
May 16, 2013 1:09:49 PM org.apache.catalina.core.AprLifecycleListener init
INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: /usr/lib64/jvm/java-1_6_0-ibm-1.6.0/jre/lib/amd64/default:/usr/lib64/jvm/java-1_6_0-ibm-1.6.0/jre/lib/amd64:/usr/lib
May 16, 2013 1:09:49 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
May 16, 2013 1:09:49 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 788 ms
May 16, 2013 1:09:49 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
May 16, 2013 1:09:49 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.18
May 16, 2013 1:09:50 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8080
May 16, 2013 1:09:50 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 1092 ms
Thanks for your time!
Stan

Originally Posted by Demaximis
I looked at the /var/log/apache2/error_log right after I tried to bring up the properties of one of the netstorage folders and this is what I see:
[Fri May 17 08:47:27 2013] [error] (111)Connection refused: proxy: AJP: attempt to connect to 127.0.0.1:9009 (localhost) failed
[Fri May 17 08:47:27 2013] [error] ap_proxy_connect_backend disabling worker for (localhost)
[Fri May 17 08:47:27 2013] [error] proxy: AJP: failed to make connection to backend: localhost
Does this point to where the issue is?
I'm not 100% sure if that's the culprit or not. I didn't think netstorage used an odd port like that.
I vaguely remember encountering this before a long time ago.
Out of curiosity, is the actual server name (like: oes11sp1.abc.com) in your /etc/hosts
AND
is that the same DNS name you are using to access the netstorage server?
In our case, we use a different DNS name vs. what the server name really is and we have to adjust the /etc/hosts correctly for some of the internal components to work.
Also, when you installed OES11, did you accidentally leave the checkbox checked to add the local host definition to the /etc/hosts?

Tween : copy / paste properties not working on a particular tween

Hello,
I'm making very simple tweens with the "new" (not classic) method.
I want the object to move only after a while so I'm trying to duplicate start position to a later keyframe but, for some reason, it just doesn't work on my project whereas it work on a test file.
I copy and paste properties of the first frame to the other keyframe but it's not applied at all.
1 = start position
2 = keyframe with pasted properties but position is still the same (between 1 and 3)
3 = end position
Any reason why this wouldn't work ? Thanks.

3 is a keyframe. it doesn't matter what you change in keyframe 2. keyframe 3 is unchanged and is expected to remain unchanged unless you change it.
start over and drag the start (keyframe 1) to frame 12 where you want the tween to start. if you want the tween to end on frame 24, remove some frames from that tween after moving its start (and end).

UIButton Properties not working...

I am trying to change a button's properties to hide it once it has been pressed. Not having any luck. Here is what I have:
#import <UIKit/UIKit.h>
@interface MyPageViewController : UIViewController {
IBOutlet UIButton *my_button;
@property (nonatomic, retain) IBOutlet UIButton *my_button;
@end
#import "MyPageViewController.h"
@implementation MyPageViewController
@synthesize my_button,
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
if(field1 == UP) {
my_button.hidden = TRUE;
In IB have my_button attached to a start_loop method.

Overriding a UIResponder method in a view controller only works if the view doesn't override the same method. Since UIControl overrides the touch methods, I wouldn't expect touchesBegan in the controller to ever get called (put a NSLog in that method to find out). Why not just connect the touch down event in my_button to a controller action in IB (assuming you really don't want the action to wait for touch up inside)? I would also remove the (field1==UP) condition when testing to rule out problems in that logic. My first implementation of an action method is generally just NSLog. I don't add the rest of the code until I'm confident the method is getting called when expected.
Also, if you want start_loop to be called after the button is hidden, you'll need to call start_loop from the method that hides the button. Once the button is hidden, it won't respond to further touch events. All in all, you might consider just connecting touch up inside to an action method which sets hidden and calls your start_loop method. This might be a better interface than what you're trying to do now, since users don't expect buttons to respond on touch down.

Intuos Pen Tablet keystroke shortcuts/pen properties not working in Photoshop

Recently got the Intuos Creative Pen Tablet from Wacom but the keystroke shortcuts I set up for the pen in Photoshop are not recognized in Photoshop. Instead, the pen acts with the properties found under the "All other applications" tab. Anyone know how to fix this?

It's a nightmare trying to keep up with all the name changes Wacom are giving their products. I don't even know what I own anymore. Only what I used to own befoer I apparently owned something else.
From what I can see on the Wacom site, this tablet doesn't have Express keys or wheel. So does it rely on keyboard shortcuts, or does it have a HUD you can pick things from? If thisa is a new installation, have you tried restarting the computer to make the new properties take? What version of Photoshop are you using? And does the tablet properties recognize that version of Photoshop? Did you add Photoshop to the properties? If so, could you be using say the 32bit version, having set the tablet properties to the 64bit version?

Page Properties not working

When I try to change the link colors in page properties, it doesn't work, it keeps going back to default.
I'm using Dreamweaver CS5.5 for Mac
Any help would be appreciated.
Thank you
Judy

Here's the resulting code:
 
 Categories
 
 <table width="644" border="1" align="center" cellpadding="0" cellspacing="0">
 <tr>
 <td><ul>
 <li><a href="fiction.html">Fiction</a> 
 
 </li>
 <li><a href="non-fiction.html">Non Fiction</a> 
 
 </li>
 <li><a href="children-young-adult.html">Children/Young Adult</a> 
 
 </li>
 <li><a href="romance.html">Romance</a> 
 
 </li>
 <li><a href="science-fiction.html">Science Fiction</a> 
 
 </li>
 <li><a href="humor.html">Humor</a></li>
 </ul></td>
 </tr>
 </table>

Updating CMS Node properties not working

I have a pageflow controller that is fetching a node from the content
management server, and updating a property on it. However, this value change
is not being persisted... the next time I load the node the old value is
still there and the modified time has not been changed.
Does the proper way to modify node metadata differ from the following????
NodeOps nodeOps = repManager.getNodeOps();
ID nodeID = new ID(repName,nodeUID);
Node node = nodeOps.getNode(nodeID);
Property currentProperty = currentProperty =
currentNode.getProperty("mymetadatatitle");
currentProperty.setValue(new Value("newStringValue"));
I have also tried using:
nodeOps.renameNode(nodeID,newName);
... which is also not persisting any changes. I have verified that the
incoming values reflect the changed values I would like to persist.
Is there some kind of transaction boundary that I'm not aware of, and a
transaction possibly rolling back? I don't see any errors or exception being
thrown and am stumped....
thanks!
Markus

Ahhhhhhh... I'm sure that'll solve it... thanks!
Markus
"Gregory Smith" <[email protected]> wrote in message
news:[email protected]...
The Property object is just a value object, so updating it does not
trigger a save.
Try this after your code:
node = nodeOps.updateProperties(node.getId(),
node.getProperties());
The returning Node should have the updated properties, as well, plus
anyother side effects from the save.
I'm not sure why renameNode() isn't persisting anything in the database
tables, without more information. Node is also a value object, so just
calling renameNode() won't modify the node instance you have unless you
reassign from the return value (e.g. node =
nodeOps.renameNode(node.getId(), newName)). However, just the call
should update the database once the transaction is finished. And, if
you're not creating an outer transaction somewhere (i.e. in the
jsp/servlet/jpf, or at an EJB boundary), then a transaction gets created
and comitted entirely within the call to renameNode().
Greg
Markus Blumrich wrote:
I have a pageflow controller that is fetching a node from the content
management server, and updating a property on it. However, this value
change
is not being persisted... the next time I load the node the old value is
still there and the modified time has not been changed.
Does the proper way to modify node metadata differ from thefollowing????
>>
NodeOps nodeOps = repManager.getNodeOps();
ID nodeID = new ID(repName,nodeUID);
Node node = nodeOps.getNode(nodeID);
Property currentProperty = currentProperty =
currentNode.getProperty("mymetadatatitle");
currentProperty.setValue(new Value("newStringValue"));
I have also tried using:
nodeOps.renameNode(nodeID,newName);
... which is also not persisting any changes. I have verified that the
incoming values reflect the changed values I would like to persist.
Is there some kind of transaction boundary that I'm not aware of, and a
transaction possibly rolling back? I don't see any errors or exceptionbeing
thrown and am stumped....
thanks!
Markus

Help! Slideshow properties not working with multiple albums

Hi,
The album properties in the slideshow creator doesn't seem to
work in the case of multiple albums in one slideshow. When I add an
album description and a thumbnail for a particular album, the info
is lost when I add similar information to a subsequent album, i.e.
only the last entry gets added to the final slideshow. Basically,
all entries in the album properties section don't get saved. Any
help would be really appreciated.
I'm using CS4 on windows vista 64bit which includes version
1.6 of create slideshow.
Thanks
P.S. Just tried the same thing on a friend's computer with
CS3 and windows xp and everthing works as expected. The create
slideshow version there is 1.5.

I also see this behavior.
h

Slide properties not working

Hi
Can someone help please? I'm half way through my captivate project and for some reason I am unable to add labels to the new slides. Also I don't have my list of master slides to choose from anymore. They still appear next to the timeline but I can't use the drop down list in the properties box to assign a master to a new slide. Also my continue action for a button doesn't always work. I'm confused.
thanks
Julie

Hi there Lilybiri
I hope you are feeling better.
I don't have any widgets or text animations, or advanced actions, it's a very basic project for my first attempt.
I have found a work-around, where I need to open a new project and then open up the project in question, and that seems to do the trick. I tried copying it over but this was so time consuming that I'll stick to the work-around for this project but will definitely keep an eye on this in the future.
Thanks for your help

CSS3 properties not working on Windows

I apologize if I'm asking a question that might be common
information... built an App for Mac (in HTML/JS) that uses CSS3:
box-shadow,
text-shadow,
-webkit-text-stroke
... but after transporting it to a windows machine, none of the
shadows or strokes show up.
I built the page in Safari, but tested it in ADT before
sending it over and it looked just fine. Are there CSS properties
missing from the Windows version of AIR? Or am I just doing
something wrong? What version of Webkit is in AIR?

Hi,
In Mac & Windows, the webkit version is 523. There
shouldn't be difference in HTML page rendering in AIR on MAC &
windows. You may have found a bug; please file it at
http://www.adobe.com/go/wish

Mandatory UI properties not working

Similar Messages

Maybe you are looking for