Manipulate Product/Service Selection at start of SC (SRM 7.0)

Hello,
I want to manipulate the possibility of selecting 'Product' or 'Service' at the beginning of SC creation. Normally I would do this with BAdI BBP_SC_MODIFY_UI. But this doesn't help. Is there any other place which needs to be considered or checked?
I have the following situation:
Selection is disabled and the value is 'Product'.
Customer wants to have the selection of 'Product' and 'Service' again.
Any help would be appritiated.
Kind regards,
Thomas
Note: SRM 7.0
Edited by: Thomas Mueller on Dec 19, 2011 3:51 PM

Problem solved.
I used enhancement implementation: WD_BADI_DOMODIFYVIEW, Meth. WDDOMODIFYVIEW
You need to know the ID of the UI element as well. Example:
lo_element = view->get_element( id = 'ITM_TYPE_DROPDOWN' ).
IF lo_element IS BOUND.
lo_dropdown ?= lo_element.
lo_dropdown->set_enabled( value = ' ' ).
ENDIF.

Similar Messages

Vista SP1 - CF Service will not start

Running Vista Business. Life was good, I was productive! (CF 8 btw).
After installing Vista SP1, CF service will not start. Digging a little deeper, turns out JRUN can't fire off "coldfusion", one of the servers listed. Here is the error:
04/06 11:49:20 error Failed to create new connection
java.net.SocketException: select failed
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
at java.net.ServerSocket.implAccept(ServerSocket.java:453)
at java.net.ServerSocket.accept(ServerSocket.java:421)
at jrun.jms.core.kernel.mipc.MultiplexConnectionServer.run(MultiplexConnectionServer.java:15 4)
Some digging turned up the possiblity that the jndi.properties file isn't being read. Changed permissions on it to let everyone in. Heck, you guys can probably get at it right now form where you are its so open!
More digging, turns out Windows Firewall like to block port 2930, which is apparently used for internal communication with jndi settings or some such. Opened that up. Found evidence of further internal communication on port 900, opened that up to.
Found this very useful and a bit scary info about missing DLLs and so forth:
http://www.communitymx.com/content/article.cfm?page=6&cid=224AA
Found reference to the updated Vista TCP/IP stack being a culprit in some cases, which often seemed to come down to, get this, a new host file entry for localhost: ::1 localhost. Commented that out, still no joy.
Tried reinstalling. Still no go.
Pretty much exhausted all possibilities I was able to think of or find info about.
Any ideas or similar experiences? Or, failing that, the address of a tall building to jump off? Thanks!

Read the manual?!?! No way, never! That would be like... stopping at a gas station to ask for directions!
But seriously, I did poke around there a bit. I do tend to forget that there is more to there is more there than the language reference.
Never been stuck like this though. Probably done over 100 installs dating back to CF4 on just about all windows flavors but have never had to dig in to the guts of the underlying Java like this.
Thinking it has to be something unique to this machine; I have done other Vista installs of CF8 with only minimal issues (typically having to set the service to run under an account that has permissions, maybe even set jrun.exe and jrunsvc.exe to execute under an admin account, but thats about it). Unfortunately, partially because of the environment we operate in, a fresh workstation install is a good day and half to two day ordeal.
Help me Obi Wan, you're my only hope!

'error 1069 - (The service did not start due to a logon failure) in BAM

I installed BAM on XP SP2, i do have IIS configured and XE DB, after installing when i tried starting the services as per post-installion guide.i did found the error 'An error 1069 - (The service did not start due to a logon failure).In google i could find a remedy saying
Remedy: Go to Start /Programs / Administrative tools / Services. Right-click the Goodlink Server and select Properties. Click the Log On tab. Retype the correct password. Start the Goodlink service.
i did so but did found the same error.So i tried changing a few things in LogOn tab such as " Earlier it was logging in from machine name and pwd , since it gave an error" i changed it to local system account ." now all services of BAM have started except Oracle BAM Active Data cache.
Anyone pls rep how do i resolve this? Do i need to re-install? i need this to be done very urgently.

Windows XP is not a certified platform for BAM. However, the product works fine on XP for evaluations and demos. For production, use a certified/supported version of Windows as is documented in the Software System Requirements section of the BAM Install Guide.
All Postinstall steps apply to all versions of Windows that BAM runs on except for the Postinstall step called "Required Configuration for Microsoft Windows Server 2003". As indicated by the step name, this one is for W2003 only.
"network not found windows 53 error" is generally a network, account or password issue. Please follow the Install Guide step by step to avoid installation issues like this.
See "Troubleshooting Start Page Issues" for start page problems.
As indicated in the Install Guide, you can use host names or IP addresses:
"12. On the Configure location of Oracle BAM step, enter the host name or the IP
address where each component is to be installed, even if it is not being installed at
this time, then click Next."
Regards, Stephen

"Reporting services" service does not start automatically

I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log:
1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect.
2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
If i select "start" from service's context menu then it starting normally and it's state becomes Running.
What can i do to make reporting services starting automatically on system load?

i have the same problem here in one of our servers ,, it was working and suddenly it stopped i don't know why
when i reviewed the Event Viewer :
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 8/22/2010
Time: 12:05:26 PM
User: N/A
Computer: SERVICE-CENTER
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. ---> System.UnauthorizedAccessException:
Access to the path 'C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer\RSReportServer.config' is denied.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at Microsoft.ReportingServices.Diagnostics.Globals.SafeOpenXmlDocumentFile(XmlDocument doc, String pathToXmlFile)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.LoadDocument()
   at Microsoft.ReportingServices.Diagnostics.R...
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any body can help with this ,, because i didn't find anything helpful till now !!!
dear all
i installed SQL Server 2005 SP2 and it solved my problem
wish you all luck

Password service won't start

Following an unplanned hard restart of our server (Mac OS X 10.9.5, Server 3.2.2), the password service won't start, so our staff can't log into mail, calendars or file sharing.
When I launch Open Directory, the main window has the message "Unable to load replica list", then it switches itself off after a minute or so.
I've looked at the certificates in Server and they have the green tick so presumably are OK.
DNS is working OK and running the command "sudo changeip -checkhostname" reports success.
Here's the section of log that repeats every few seconds as PasswordService repeatedly starts up and exits:
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService[5890]) Exited with code: 1
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:02.540 xscertd[249]: Failed sending LookupCRLByCARecordName command to com.apple.xscertd.helper: The operation couldn’t be completed. (com.apple.certificateserver error 42005.)
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd[5894]) Exited with code: 1
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd) Throttling respawn: Will start in 7 seconds
13/03/2015 20:55:10.206 xscertd-helper[5897]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper[5897]) Exited with code: 1
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject loadXMLData]: Unable to locate passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject saveXMLData]: ldap_modify_ext_s of the passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.684 PasswordService[5901]: int pwsf_GetPublicKey(char *): ldap_search_ext_s cn=authdata for Public Key returned -1
13/03/2015 20:55:10.687 com.apple.launchd[1]: (com.apple.PasswordService[5901]) Exited with code: 1
I have backups (both Time Machine and clones of the hard drive) that I could use to restore the corrupted bit of the configuration, if necessary, but I don't know what to restore.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname.
5. Only if you're still running Mavericks server, follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]

I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
Applying 10.245.33.37_cinder.pp
10.245.33.37_keystone.pp: [ ERROR ]
Applying Puppet manifests [ ERROR ]
ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
Additional information:
* A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
* Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
* Did not create a cinder volume group, one already existed
* File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
* To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
Packages:
[root@slcai461 ~]# rpm -qa|grep keystone
python-keystoneclient-0.9.0-5.el6.noarch
python-keystone-2014.1.3-2.el6.noarch
openstack-keystone-2014.1.3-2.el6.noarch
[root@slcai461 ~]# rpm -qa|grep packstack
openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
Log :
[root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
 (at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Wrapped exception:
Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
Notice: Finished catalog run in 3.10 seconds
Please let me know how to fix this.

This problem connected with proxy-setings.
As the first steps you should try:
 1. export system env variable:
http_proxy=http://www-proxy.ru.oracle.com:80
https_proxy=https://www-proxy.ru.oracle.com:80
no_proxy=127.0.0.1,localhost
and you can also export
 export OS_TENANT_NAME=admin
 export OS_USERNAME=admin
 export OS_PASSWORD=root
 export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to Openstack dashboard.

Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What does this mean? I have had this phone for over a year..

Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What is the issue, had this phone over a year??

I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck!

I'm installing the newest itunes 64 bit on my win 7 64 bit professional os. using the itunes installer it loads itunes part way and then i get an error message saying that bonjour service failed to start. i cant get itunes any further. i have to back out

I'm installing the newest version of Itunes over the last version on my laptop. win 7 pro os. it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services. I can't retry, ignore only cancel which un-installs all that it has installed and reverts me to the last version which i had. any idea?

it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services.
Sometimes we can get past that one by disabling the Bonjour Service prior to the install.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try another iTunes install. Does it go through properly this time?

OracleOraDb10g_home1TNSListener service does not start

I am using Win XP. I have installed Oracle 10g.
OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
Thanks

Oracle installation was successful.
after lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
c-wireless.uc.edu)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
Thanks.

Oracel Service does not start

I create a service and it starts at times and would'nt at other times. In my services window, all I see is a 'starting' but it never starts. Where should I look. Please help. Thank you.

Hi Manuel,
I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
Using Registry Editor incorrectly can cause serious problems:
In Registry Editor, locate, and then right-click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
d.In the Value data text box, type TimeoutPeriod, and then click OK
Refer to:
Error 1053: The service did not respond to the
start or control request in a timely fashion - When trying to start the server service.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

JRun4 service does not start!

I installed JRun 4 trial edition.I have Java SE6.Everything goes well with the installation But JRun can not be started as a WindowsXP service.I have Microsoft WindowsXP Professional SP3.I tried executing the command
C:\JRun4\bin>jrunsvc.exe -starttimeout 900 " Macromedia JRun Default Server"
Usage:
jrunsvc -install <jrun-server> [service-name [service-display [service-descripti
on]]] [-<jrun-option>...]
or -remove service-name
or -start service-name
or -stop service-name
or -console service-name [-<jrun-option>...]
But it I think there is something wrong with how I use it.Your advice please on that too.I am herewith attaching the default error log and the admin error log also for you advice

Hi Manuel,
I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
Using Registry Editor incorrectly can cause serious problems:
In Registry Editor, locate, and then right-click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
d.In the Value data text box, type TimeoutPeriod, and then click OK
Refer to:
Error 1053: The service did not respond to the
start or control request in a timely fashion - When trying to start the server service.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Windows listener +service does not start automatically eventhough Automatic

Hi
When I restart the database server, the listener is not starting automatically , so as the service.
Both are set to start automatically.
This was working before and all of a sudden, this problem appeared.
I dont remember changing any setting on the database side but on windows server side, not sure if anything is changed.
The error we received:
============
The OracleServiceGEOOAP service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
The OracleOraDb11g_home1TNSListener service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
alert log
=======
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 11-MAR-2011 15:44:26
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
listener.log
========
Fri Mar 11 15:44:23 2011
11-MAR-2011 15:44:23 * service_update * geop * 0
11-MAR-2011 15:44:29 * service_died * geooap * 12547
TNS-12547: TNS:lost contact
11-MAR-2011 15:44:30 * service_died * geop * 12547
TNS-12547: TNS:lost contact
Fri Mar 11 15:44:37 2011
11-MAR-2011 15:44:37 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65288)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
11-MAR-2011 15:44:41 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65289)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
11-MAR-2011 15:44:43 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65290)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
Fri Mar 11 15:53:46 2011
So now we have to manually restart the listener and service , for the database to be opened. Is it possible to give direction what areas need to check, to solve this issue?
Thanks.

Hi Krithi,
Can you confirm my understanding here:
* Since a short time the automatic startup of the listener and Oracle instance fail.
* You can manually startup the listener and database instance without any problem, and then all runs as expected
so far so good?
What's your procedure to start the listener and DB instances?
Are you performing the startups with your own user account, or SYSTEM, or a dedicated Oracle account?
Are the windows services running under SYSTEM, a dedicated Oracle user....??
Could it be that the system administrator installed something (like a new Oracle client) which would have changed some settings?
Can you compare the environment variables (ORACLE_HOME, ORACLE_SID, PATH) between the account YOU use for manual startup and those for the user account used to (auto)start the services?
Maybe you can try to plan a reboot after you have set the problematic services to run under your profile?
Well.... a few points to investigate if not yet considered.
HTH,
Thierry

How to create a Catalog (Product/Service) & TAX issues

SRM Guru's
Product Ver: SRM 5.0 : ECC 6.0 ( No CCM or Service Master )
TAX S/w: Vertex ( O )
As of now: We are planning to implement a vanilla SRM-ECC (in ext. classic). We are into Indirect procurement w/limit orders.
Catalog:
I want to create a Catalog ( UNSPSC or 1 level company catalog),
 1. Can this be created in ECC (with out Products ) and replicated to SRM (EBP)
 2. How to go about creating it ?
 3. Can it be done with out CCM, if so how
 4. How to replicate it ? ( no CCM or middleware )
 5. Can i create it in EBP ? if so, plse say how..
TAX:
Vertex mentioned that, Tax codes will be mapped to services, in our case, since we dont have Services except a free form text describing what service is provided ( eg: "Payroll Service" ), what can be done ?
In a normal scenario, i can imagine having Service Master with all "Services", but in our situation, how can we use catalog to map to TAX codes. ?
PS: If you could, please describe/break down the relationship between
 Catalog -- Category Id -- Product -- Services/Materials
regards.,
-Rupesh

Hi
To create internal catalog there are three possibilities
1. CCM Catalog developed by SAP.
2. SRM-MDM Catalog taken over by SAP.
3. Requisite Catalog other catalog provider.
Check these links ->
http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
https://websmp101.sap-ag.de/ibc-srm here check SRM-MDM Catalog.
http://www.requisite.com/solutions/index.cfm?pageID=productpac_bugseye
Re: Catalog Mgmt
Other related links ->
Create Internal Catalog
Re: Create Internal Catalog
CCM Create catalog link
Re: creating a catalog
Catalog ID does not exist
Re: SRM Contract Catalog - Creation
CCM SRM product catalog
Re: Product Catalog to CCM
Managing Catalog content in SRM
http://help.sap.com/saphelp_srm50/helpdata/en/0a/f9353e39011a38e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ba/7a50415e216e24e10000000a155106/frameset.htm
P.S: All tables for CCM (Catalog tables and CCM) start with "/CCM/" ,so you can search on that using SE11 transaction.
MDM-SRM Catalog
Re: MDM SRM - Catalog - External Catalog - Punchout
Punchout catalog
Punchout catalog
Loading Product Data into Catalog using CSV files
Loading Product Data into Catalog using CSV2.0 file
Contract catalog
Re: Contract catalog
Hope this will definitely help. Do let me know.
Regards
- Atul

Error in EPMA Server service and not starting.

Hello Gurus,
We are using Hyperion 11.1.2.1 and DB is SQL 2008;
Till yesterday all the services are running fine but suddenly we are facing below error; other services are starting but EPMA service is not starting and throwing error.
Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. --->
Hyperion.CommonServices.Exceptions.DataAccessLayerException: To run the Dimension Server, both ALLOW_SNAPSHOT_ISOLATION and READ_COMMITTED_SNAPSHOT database settings must be set to 'ON'. Their values are currently 'OFF' and 'OFF' respectively.
Please consult the product documentation for details.
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion, Boolean onlyLoadKnownTables)
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
at
Thanks,
VA

Hello Mady,
We are using EPMA applications and Classic applications; unfortunately we haven't taken any backup's of these applications.
I heard from some one that by performing EPMA re-configuration there is a chance of loosing the applications. Only Classic applications can be restored.
Please let me know if my understanding is wrong and kindly suggest the next steps to restore the applications.
Currently we are able to login only to Shared Services only; we can login to Workspace/planning but unable to access the applications.
Thanks for your help in advance!
Thanks,
VA

Playing a ts-file in an application (JMF,without Tuning/service selection)

Hey there!
I got a ts-File (1.438.1) on HDD and i am trying to play it using a jmf-player in my application. I know that MHP does not support playing video from HDD but the IRT RI (which i use) does..
For a ts is also just a *.mpg-file i thought my solution would work..
Anyway, my stream is found but i get a org.davic.net.tuning.NotTunedException.
Here's a piece of my code:
public void playVideo() {
targetVideo = new MediaLocator(dvb://1.438.1);
player = javax.media.Manager.createPlayer(targetVideo);
player.addControllerListener(this);
scalingControl = (org.dvb.media.BackgroundVideoPresentationControl) player.getControl("org.dvb.media.BackgroundVideoPresentationControl");
player.start();
transformation = new VideoTransformation();
transformation.setScalingFactors((float)0.5, (float)0.5);
transformation.setVideoPosition(new HScreenPoint((float)0.5, (float)0.0));
transformation = scalingControl.getClosestMatch(transformation);
result = scalingControl.setVideoTransformation(transformation);
player.stop();
player.deallocate();
catch (Exception e){
System.out.println("Exception thrown while using the JMF Player:");
e.printStackTrace();
I was wondering if there is way to get this run without using the service selection API or Tuning API?
Hopefully someone has an idea or is able to explain me why this won't work!!!
Thanks in advance,
with best regards,
Alex.

Hello Steve!
First of all, thank you for trying to help me out!
I tried the code i posted above (using BackgroundVideoPresentationControl and a quarter sized video area in the upper right corner).
The NullPointer is thrown at the following line:
transformation = scalingControl.getClosestMatch(transformation);
I also tried other positions and video sizes but nothing worked at all..
For at least quarter size video should be supported i am not quite sure where the problem is..
As i said i also tried AWTVideoSizeControl with something like:
source = new Rect(0,0,320,288);
dest = new Rect(source.getBounds());
videoSize = new AWTVideoSize(source,destination);
When i do something like:
transformation.setVideoSize(videoSize);
i get a NullPointer too!
Do you have any ideas what my problems might be?
Thanks in advance,
with best regards,
Alex.
P.S.:
My *.ts-File was captured with a DVB-Card and contains 6 Services (that only contain TV-programs). For i am not able to test it by now (because i don't see any video ;-( ) i have another question (Because i am a little bit confused concerning service selection):
Is it possible to play the different services of my ts-File (that's on my HDD) with the JMF , or do i 0have to use the service selection API for adressing the different streams (or services)? I guess this is not necessary for i can just set a parameter in the
line:
targetVideo = new MediaLocator(dvb://1.438.3);
that describes the service (3 in that case). Am i right or am i really really confused and a hopeless case??
Thanks again,
with very best regards,
Alex.

Manipulate Product/Service Selection at start of SC (SRM 7.0)

Similar Messages

Maybe you are looking for