Manual AntiAlias when using CPU-Mode
Hi there,
when switching to CPU-Mode (which is faster in my case) all is fine, except the scaled images look very bad.
I'm compiling with AIR 2.7 and I've read somewhere that cpu mode has no AntiAlias.
Can I use some other method / pixelmanipulation to AntiAlias my images?
Apparently bitmap smoothing is disabled for Android. It still works in iOS. A work around is to do your own bitmapData.draw() to scale the image, and in that you can specify smoothing to be true.
Similar Messages
-
Sqlldr producing ora-1008 when using conventional mode
On 9.2.0.8 Solaris 9,
When performing the load using direct mode it works. only when using conventional mode i get the error.
any ideas?
10x,Don't use reserved words (CHAR,which is a format specification) as column names:
http://download.oracle.com/docs/cd/E11882_01/server.112/e22490/ldr_field_list.htm#i1015797 -
JVM crash when using debug mode in eclipse
Hi,
I get a SIGSEGV every time I use debug mode in Eclipse. Sometimes after a few breakpoints, sometimes when I start the debug view.
Have Eclipse helios and JRE 6.0_21-b06 but have also tried 1.6.0_03-b05 with same result.
The log file (hs_error_pidxxx.log) gives the following:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xff23259c, pid=2917, tid=2
# JRE version: 6.0_21-b06
# Java VM: Java HotSpot(TM) Server VM (17.0-b16 mixed mode solaris-sparc )
# Problematic frame:
# C [libc.so.1+0x3259c] strncmp+0x348
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x0003d800): JavaThread "main" [_thread_in_native, id=2, stack(0xfe300000,0xfe380000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x00000000
Registers:
O0=0x00000001 O1=0x00000000 O2=0x00000001 O3=0x00000000
O4=0x00000102 O5=0x0125d898 O6=0xfe37d3b8 O7=0xe1dd104c
G1=0x00105000 G2=0x00007b00 G3=0x00000000 G4=0xe2947b08
G5=0xfee6e2e8 G6=0x00000000 G7=0xfe3e0200 Y=0x00000000
PC=0xff23259c nPC=0xff2325a0
Top of Stack: (sp=0xfe37d3b8)
0xfe37d3b8: 00000000 e1ebec00 ff2c1bd0 e1ebec00
0xfe37d3c8: 011966e8 00000001 fee2e000 00001cc4
0xfe37d3d8: 1d69c014 e2963fec 00000001 00000108
0xfe37d3e8: 0000006e 0000006e fe37d3f8 e2947bd4
0xfe37d3f8: e2963ff4 014e2b38 e2963ffc 00000000
0xfe37d408: fee2e000 011afd80 01da6f38 e2963fec
0xfe37d418: fe37d484 0125da90 0125dab8 00000002
0xfe37d428: 00000000 e2974f88 fe37d488 e2350fd4
Instructions: (pc=0xff23259c)
0xff23258c: 91 ee 00 00 b4 a6 a0 01 0a bf ff e1 01 00 00 00
0xff23259c: f8 0e 40 18 fa 0e 40 00 b2 06 60 01 80 a7 00 1d
Stack: [0xfe300000,0xfe380000], sp=0xfe37d3b8, free space=1f4ff23259ck
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [libc.so.1+0x3259c] strncmp+0x348
C [libpangoft2-1.0.so.0.501.1+0x7bdc]
C [libswt-pi-gtk-3650.so+0x50fdc] Java_org_eclipse_swt_internal_gtk_OS__1pango_1context_1list_1families+0x74
j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+472954808
j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+0
j org.eclipse.swt.internal.gtk.OS.pango_context_list_families(I[I[I)V+10
j org.eclipse.swt.graphics.Device.getFontList(Ljava/lang/String;Z)[Lorg/eclipse/swt/graphics/FontData;+53
j org.eclipse.jface.resource.FontRegistry.filterData([Lorg/eclipse/swt/graphics/FontData;Lorg/eclipse/swt/widgets/Display;)[Lorg/eclipse/swt/graphics/FontData;+67
j org.eclipse.jface.resource.FontRegistry.createFont(Ljava/lang/String;[Lorg/eclipse/swt/graphics/FontData;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+32
j org.eclipse.jface.resource.FontRegistry.getFontRecord(Ljava/lang/String;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+53
j org.eclipse.jface.resource.FontRegistry.get(Ljava/lang/String;)Lorg/eclipse/swt/graphics/Font;+2
j org.eclipse.jface.resource.JFaceResources.getHeaderFont()Lorg/eclipse/swt/graphics/Font;+5
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createTitleLabel(Lorg/eclipse/swt/widgets/Composite;Ljava/lang/String;)Lorg/eclipse/swt/widgets/Label;+36
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createControl(Lorg/eclipse/swt/widgets/Composite;)Lorg/eclipse/swt/widgets/Control;+99
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.verifyInput(Lorg/eclipse/ui/IEditorInput;)V+95
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.createPartControl(Lorg/eclipse/swt/widgets/Composite;)V+96
j org.eclipse.ui.internal.EditorReference.createPartHelper()Lorg/eclipse/ui/IEditorPart;+361
j org.eclipse.ui.internal.EditorReference.createPart()Lorg/eclipse/ui/IWorkbenchPart;+27
j org.eclipse.ui.internal.WorkbenchPartReference.getPart(Z)Lorg/eclipse/ui/IWorkbenchPart;+65
j org.eclipse.ui.internal.EditorReference.getEditor(Z)Lorg/eclipse/ui/IEditorPart;+2
j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+233
j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+27
j org.eclipse.ui.internal.WorkbenchPage.access$11(Lorg/eclipse/ui/internal/WorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+8
j org.eclipse.ui.internal.WorkbenchPage$10.run()V+29
j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+59
j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZI)Lorg/eclipse/ui/IEditorPart;+7
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility$1.run()V+41
j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/ui/IWorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;)Lorg/eclipse/ui/IEditorPart;+26
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)Lorg/eclipse/ui/IEditorPart;+201
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.display(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+3
j org.eclipse.debug.ui.DebugUITools.displaySource(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+5
j org.eclipse.debug.internal.ui.elements.adapters.StackFrameSourceDisplayAdapter$SourceDisplayJob.runInUIThread(Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/core/runtime/IStatus;+24
j org.eclipse.ui.progress.UIJob$1.run()V+53
J org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Z)Z
J org.eclipse.swt.widgets.Display.runAsyncMessages(Z)Z
J org.eclipse.ui.internal.Workbench.runEventLoop(Lorg/eclipse/jface/window/Window$IExceptionHandler;Lorg/eclipse/swt/widgets/Display;)V
j org.eclipse.ui.internal.Workbench.runUI()I+555
j org.eclipse.ui.internal.Workbench.access$4(Lorg/eclipse/ui/internal/Workbench;)I+1
j org.eclipse.ui.internal.Workbench$7.run()V+55
j org.eclipse.core.databinding.observable.Realm.runWithDefault(Lorg/eclipse/core/databinding/observable/Realm;Ljava/lang/Runnable;)V+12
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+18
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
j org.eclipse.ui.internal.ide.application.IDEApplication.start(Lorg/eclipse/equinox/app/IApplicationContext;)Ljava/lang/Object;+99
j org.eclipse.equinox.internal.app.EclipseAppHandle.run(Ljava/lang/Object;)Ljava/lang/Object;+135
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(Ljava/lang/Object;)Ljava/lang/Object;+103
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(Ljava/lang/Object;)Ljava/lang/Object;+29
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+149
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+183
v ~StubRoutines::call_stub
V [libjvm.so+0x15e33c]
V [libjvm.so+0x797afc]
V [libjvm.so+0x217704]
V [libjvm.so+0x215d8c]
C [libjava.so+0x10bfc] Java_sun_reflect_NativeMethodAccessorImpl_invoke0+0x18
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+746878888
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+161
j org.eclipse.equinox.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+211
j org.eclipse.equinox.launcher.Main.basicRun([Ljava/lang/String;)V+126
j org.eclipse.equinox.launcher.Main.run([Ljava/lang/String;)I+4
j org.eclipse.equinox.launcher.Main.main([Ljava/lang/String;)V+10
v ~StubRoutines::call_stub
V [libjvm.so+0x15e33c]
V [libjvm.so+0x2012dc]
C [java+0x3ab8]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+0
j org.eclipse.swt.internal.gtk.OS.pango_context_list_families(I[I[I)V+10
j org.eclipse.swt.graphics.Device.getFontList(Ljava/lang/String;Z)[Lorg/eclipse/swt/graphics/FontData;+53
j org.eclipse.jface.resource.FontRegistry.filterData([Lorg/eclipse/swt/graphics/FontData;Lorg/eclipse/swt/widgets/Display;)[Lorg/eclipse/swt/graphics/FontData;+67
j org.eclipse.jface.resource.FontRegistry.createFont(Ljava/lang/String;[Lorg/eclipse/swt/graphics/FontData;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+32
j org.eclipse.jface.resource.FontRegistry.getFontRecord(Ljava/lang/String;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+53
j org.eclipse.jface.resource.FontRegistry.get(Ljava/lang/String;)Lorg/eclipse/swt/graphics/Font;+2
j org.eclipse.jface.resource.JFaceResources.getHeaderFont()Lorg/eclipse/swt/graphics/Font;+5
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createTitleLabel(Lorg/eclipse/swt/widgets/Composite;Ljava/lang/String;)Lorg/eclipse/swt/widgets/Label;+36
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createControl(Lorg/eclipse/swt/widgets/Composite;)Lorg/eclipse/swt/widgets/Control;+99
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.verifyInput(Lorg/eclipse/ui/IEditorInput;)V+95
j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.createPartControl(Lorg/eclipse/swt/widgets/Composite;)V+96
j org.eclipse.ui.internal.EditorReference.createPartHelper()Lorg/eclipse/ui/IEditorPart;+361
j org.eclipse.ui.internal.EditorReference.createPart()Lorg/eclipse/ui/IWorkbenchPart;+27
j org.eclipse.ui.internal.WorkbenchPartReference.getPart(Z)Lorg/eclipse/ui/IWorkbenchPart;+65
j org.eclipse.ui.internal.EditorReference.getEditor(Z)Lorg/eclipse/ui/IEditorPart;+2
j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+233
j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+27
j org.eclipse.ui.internal.WorkbenchPage.access$11(Lorg/eclipse/ui/internal/WorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+8
j org.eclipse.ui.internal.WorkbenchPage$10.run()V+29
j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+59
j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZI)Lorg/eclipse/ui/IEditorPart;+7
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility$1.run()V+41
j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/ui/IWorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;)Lorg/eclipse/ui/IEditorPart;+26
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)Lorg/eclipse/ui/IEditorPart;+201
j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.display(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+3
j org.eclipse.debug.ui.DebugUITools.displaySource(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+5
j org.eclipse.debug.internal.ui.elements.adapters.StackFrameSourceDisplayAdapter$SourceDisplayJob.runInUIThread(Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/core/runtime/IStatus;+24
j org.eclipse.ui.progress.UIJob$1.run()V+53
J org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Z)Z
J org.eclipse.swt.widgets.Display.runAsyncMessages(Z)Z
J org.eclipse.ui.internal.Workbench.runEventLoop(Lorg/eclipse/jface/window/Window$IExceptionHandler;Lorg/eclipse/swt/widgets/Display;)V
j org.eclipse.ui.internal.Workbench.runUI()I+555
j org.eclipse.ui.internal.Workbench.access$4(Lorg/eclipse/ui/internal/Workbench;)I+1
j org.eclipse.ui.internal.Workbench$7.run()V+55
j org.eclipse.core.databinding.observable.Realm.runWithDefault(Lorg/eclipse/core/databinding/observable/Realm;Ljava/lang/Runnable;)V+12
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+18
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
j org.eclipse.ui.internal.ide.application.IDEApplication.start(Lorg/eclipse/equinox/app/IApplicationContext;)Ljava/lang/Object;+99
j org.eclipse.equinox.internal.app.EclipseAppHandle.run(Ljava/lang/Object;)Ljava/lang/Object;+135
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(Ljava/lang/Object;)Ljava/lang/Object;+103
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(Ljava/lang/Object;)Ljava/lang/Object;+29
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+149
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+183
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+161
j org.eclipse.equinox.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+211
j org.eclipse.equinox.launcher.Main.basicRun([Ljava/lang/String;)V+126
j org.eclipse.equinox.launcher.Main.run([Ljava/lang/String;)I+4
j org.eclipse.equinox.launcher.Main.main([Ljava/lang/String;)V+10
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x016fec00 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=300, stack(0xd8f00000,0xd8f80000)]
0x01a5dc00 JavaThread "org.eclipse.jdt.debug: JDI Event Dispatcher" daemon [_thread_blocked, id=292, stack(0xd9000000,0xd9080000)]
0x00a3bc00 JavaThread "Timer-2" daemon [_thread_blocked, id=291, stack(0xd9700000,0xd9780000)]
0x00a41000 JavaThread "Packet Send Manager" daemon [_thread_blocked, id=290, stack(0xd9100000,0xd9180000)]
0x01f73c00 JavaThread "Packet Receive Manager" daemon [_thread_in_native, id=289, stack(0xd9200000,0xd9280000)]
0x00e2a400 JavaThread "Timer-1" daemon [_thread_blocked, id=287, stack(0xd9a00000,0xd9a80000)]
0x0094c000 JavaThread "ServerConnection" [_thread_in_native, id=285, stack(0xd9800000,0xd9880000)]
0x0094bc00 JavaThread "Process monitor" daemon [_thread_blocked, id=284, stack(0xd9300000,0xd9380000)]
0x00895c00 JavaThread "Input Stream Monitor" daemon [_thread_blocked, id=283, stack(0xd9400000,0xd9480000)]
0x01fef800 JavaThread "Output Stream Monitor" daemon [_thread_in_native, id=282, stack(0xd9600000,0xd9680000)]
0x00a8b000 JavaThread "Output Stream Monitor" daemon [_thread_in_native, id=281, stack(0xd9900000,0xd9980000)]
0x011dbc00 JavaThread "process reaper" daemon [_thread_in_native, id=280, stack(0xd9500000,0xd9580000)]
0x01059800 JavaThread "Worker-24" [_thread_blocked, id=261, stack(0xd9c80000,0xd9d00000)]
0x01059000 JavaThread "Worker-23" [_thread_blocked, id=260, stack(0xde580000,0xde600000)]
0x02176000 JavaThread "Worker-22" [_thread_blocked, id=248, stack(0xddd00000,0xddd80000)]
0x01ff0800 JavaThread "Worker-21" [_thread_blocked, id=247, stack(0xda280000,0xda300000)]
0x00c41c00 JavaThread "Worker-20" [_thread_blocked, id=245, stack(0xdd700000,0xdd780000)]
0x0268bc00 JavaThread "Worker-19" [_thread_blocked, id=243, stack(0xde000000,0xde080000)]
0x0141e800 JavaThread "Worker-18" [_thread_blocked, id=242, stack(0xdda00000,0xdda80000)]
0x019aec00 JavaThread "Worker-16" [_thread_blocked, id=227, stack(0xddf00000,0xddf80000)]
0x0143b800 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=223, stack(0xddb00000,0xddb80000)]
0x01022800 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=219, stack(0xdde00000,0xdde80000)]
0x00a58800 JavaThread "Worker-12" [_thread_blocked, id=211, stack(0xde680000,0xde700000)]
0x018c5400 JavaThread "pool-1-thread-5" [_thread_blocked, id=187, stack(0xd9d80000,0xd9e00000)]
0x013cdc00 JavaThread "pool-1-thread-4" [_thread_blocked, id=186, stack(0xda380000,0xda400000)]
0x002a4c00 JavaThread "pool-1-thread-3" [_thread_blocked, id=185, stack(0xddc00000,0xddc80000)]
0x0282b400 JavaThread "pool-1-thread-2" [_thread_blocked, id=184, stack(0xd9e80000,0xd9f00000)]
0x018c6400 JavaThread "pool-1-thread-1" [_thread_blocked, id=183, stack(0xd9f80000,0xda000000)]
0x00973000 JavaThread "Timer-0" daemon [_thread_blocked, id=75, stack(0xdd800000,0xdd880000)]
0x00ab8000 JavaThread "Thread-39" daemon [_thread_blocked, id=74, stack(0xdd500000,0xdd580000)]
0x00dc1400 JavaThread "Worker-6" [_thread_blocked, id=73, stack(0xdd900000,0xdd980000)]
0x004db000 JavaThread "Thread-32" daemon [_thread_in_native, id=66, stack(0xda4d0000,0xda4e0000)]
0x011eb000 JavaThread "[ThreadPool Manager] - Idle Thread" daemon [_thread_blocked, id=43, stack(0xdd400000,0xdd480000)]
0x003e6400 JavaThread "Bundle File Closer" daemon [_thread_blocked, id=27, stack(0xde100000,0xde180000)]
0x007c6c00 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=26, stack(0xde200000,0xde280000)]
0x001ce800 JavaThread "Java indexing" daemon [_thread_blocked, id=24, stack(0xde380000,0xde400000)]
0x00191400 JavaThread "Worker-0" [_thread_blocked, id=21, stack(0xe2580000,0xe2600000)]
0x01235400 JavaThread "Worker-JM" [_thread_blocked, id=20, stack(0xe2380000,0xe2400000)]
0x007ff400 JavaThread "[Timer] - Main Queue Handler" daemon [_thread_blocked, id=19, stack(0xe2480000,0xe2500000)]
0x0074e000 JavaThread "Framework Event Dispatcher" daemon [_thread_blocked, id=17, stack(0xe2680000,0xe2700000)]
0x00390000 JavaThread "Start Level Event Dispatcher" daemon [_thread_blocked, id=16, stack(0xe2780000,0xe2800000)]
0x005c9800 JavaThread "State Data Manager" daemon [_thread_blocked, id=15, stack(0xe2880000,0xe2900000)]
0x00124800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=13, stack(0xe2a80000,0xe2b00000)]
0x00122400 JavaThread "CompilerThread1" daemon [_thread_blocked, id=12, stack(0xe2b80000,0xe2c00000)]
0x00110c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=11, stack(0xe2c80000,0xe2d00000)]
0x00118000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=10, stack(0xe2d80000,0xe2e00000)]
0x00107c00 JavaThread "Finalizer" daemon [_thread_blocked, id=9, stack(0xe2e80000,0xe2f00000)]
0x00106400 JavaThread "Reference Handler" daemon [_thread_blocked, id=8, stack(0xe2f80000,0xe3000000)]
=>0x0003d800 JavaThread "main" [_thread_in_native, id=2, stack(0xfe300000,0xfe380000)]
Other Threads:
0x00103c00 VMThread [stack: 0xe3080000,0xe3100000] [id=7]
0x0012ec00 WatcherThread [stack: 0xe2980000,0xe2a00000] [id=14]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
PSYoungGen total 40704K, used 18973K [0xf6000000, 0xf9400000, 0xfb800000)
eden space 29568K, 59% used [0xf6000000,0xf714b120,0xf7ce0000)
from space 11136K, 11% used [0xf7e40000,0xf7f7c5c8,0xf8920000)
to space 10432K, 0% used [0xf89d0000,0xf89d0000,0xf9400000)
PSOldGen total 90112K, used 71968K [0xeb400000, 0xf0c00000, 0xf6000000)
object space 90112K, 79% used [0xeb400000,0xefa48298,0xf0c00000)
PSPermGen total 73728K, used 71408K [0xe3400000, 0xe7c00000, 0xeb400000)
object space 73728K, 96% used [0xe3400000,0xe79bc298,0xe7c00000)
Dynamic libraries:
0x00010000 /proj/atelteadm/tools/jdk1.6.0_21/bin/java
0xff3a0000 /lib/libthread.so.1
0xff370000 /proj/atelteadm/tools/jdk1.6.0_21/bin/../jre/lib/sparc/jli/libjli.so
0xff350000 /lib/libdl.so.1
0xff200000 /lib/libc.so.1
0xff390000 /platform/SUNW,Sun-Fire-V445/lib/libc_psr.so.1
0xfe400000 /proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc/server/libjvm.so
0xff1d0000 /lib/libsocket.so.1
0xff1f0000 /usr/lib/libsched.so.1
0xff1b0000 /lib/libm.so.1
0xff180000 /usr/lib/libCrun.so.1
0xff160000 /lib/libdoor.so.1
0xff080000 /lib/libnsl.so.1
0xfef80000 /lib/libm.so.2
0xff050000 /lib/libscf.so.1
0xff140000 /lib/libuutil.so.1
VM Arguments:
jvm_args: -Xms128m -Xmx256m -XX:MaxPermSize=128m
java_command: /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar -os solaris -ws gtk -arch sparc -showsplash -launcher /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix/eclipse -name Eclipse --launcher.library /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher.gtk.solaris.sparc_1.1.0.v20100503/eclipse_1307.so -startup /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar -exitdata 74000027 -install /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix -nl en_US -showlocation -vm /proj/atelteadm/tools/jdk1.6.0_21//bin/java -vmargs -Xms128m -Xmx256m -XX:MaxPermSize=128m -jar /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=/usr/local/opt/apssystem/aps_9.1/bin:/proj/aps/bin:/home/ehollis/.afs/0/rbin:/home/ehollis/.afs/0/pbin:/env/seli/bin:/home/ehollis/.afs/0/ibin:/usr/atria/bin:/usr/afsws/bin:/usr/bin:/usr/X/bin:/usr/dt/bin:/usr/openwin/demo:/usr/openwin/bin:/usr/dt/bin:/usr/ccs/bin:/usr/sbin:/sbin:/usr/ucb:/opt/seli/bin:/opt/sge/seli/etegrid/bin:/opt/sge/seli/bctgrid/bin:/usr/ucb:.
LD_LIBRARY_PATH=/proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc/server:/proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc:/proj/atelteadm/tools/jdk1.6.0_21/jre/../lib/sparc:/app/gtk+/2.2.2/lib:/usr/sfw/lib/mozilla/
SHELL=/bin/tcsh
DISPLAY=:16.0
HOSTTYPE=sun4
OSTYPE=solaris
MACHTYPE=sparc
Signal Handlers:
SIGSEGV: [libjvm.so+0x87b320], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGBUS: [libjvm.so+0x87b320], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGFPE: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGXFSZ: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGILL: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGQUIT: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
SIGHUP: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
SIGINT: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
SIGTERM: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
SIG39: [libjvm.so+0x759ae8], sa_mask[0]=0x00000000, sa_flags=0x00000008
SIG40: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
--------------- S Y S T E M ---------------
OS: Solaris 10 10/08 s10s_u6wos_07b SPARC
uname:SunOS 5.10 Generic_142900-13 sun4u (T2 libthread)
vm_info: Java HotSpot(TM) Server VM (17.0-b16) for solaris-sparc JRE (1.6.0_21-b06), built on Jun 22 2010 01:34:33 by "" with Workshop 5.8
Any clues anyone?get a SIGSEGV every time I use debug mode in EclipseSo if you create a hello world program and then debug it, it crashes?
If yes then the causes would be
1. The VM(s) binaries are corrupted. Plural as it depends on how you run Eclipse.
2. Something else installed on your system at the OS level (or at least always running) is corrupt or is corrupting the OS.
3. A hardware failure. -
[SOLVED] kwin crash when using OpenGL mode after upgrading to 4.7
I have a Ideapad Y460 (Graphic: ATi Mobility Radeon 5650). Recent days I upgrade my KDE from 4.7RC (4.6.95) to 4.7 (4.7.00) and also Catalyst from 11.6 to 11.7.
Update:
The problem has been solved. I used [kde-unsupported] source and kdebase-workspace package in that source contains OpenGL ES support while Catalyst doesn't support it. Thank @csslayer.
But when I use OpenGL mode, kwin crashed. I run
kwin --replace
to start kwin, then the Desktop Effect shows:
OpenGL compositing (the default) has crashed KWin in the past.
This was most likely due to a driver bug.
If you think that you have meanwhile upgraded to a stable driver,
you can reset this protection but be aware that this might result in an immediate crash!
Alternatively, you might want to use the XRender backend instead.
And there is a re-enable button. But the systemsettings window crashed when I pushed it.
I checked ~/.xsessiong-error and it shows this:
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20 (X_GetProperty)
Resource id: 0x1c0015a
I downgrade Catalyst but the problem still exists while KDE4.7 RC run well on my laptop. So I'm not sure whether it is caused by kwin or by Catalyst 11.7 or other packages.
Does anyone know the solution? Thanks for your patience.
Last edited by ukyoi (2011-08-01 08:34:20)I found an solution. Go to Settings/Mail, Contact, Calendar/Fetch new data and than enable Push and choose to fetch hourly or every 30 minutes. In this case your iPad will stay connected to wifi even when smart cover is closed. If you select Manualy than wifi connection will be terminated when in sleep mode.
(Not native english speaker, hope you'll understand) -
Items in shared mailbox are not visible when using cached mode in Outlook 2013
Hi all,
When using Outlook 2013 working with the users own mailbox works great, but when a user connects an additional mailbox to its mailbox, this mailbox is shown correctly, but it contains no items. The folder list is shown correctly, but there are no items to be
seen.
These users (I have seen it with 3 different users and 2 shared mailboxes already) have full access to these mailboxes (Exchange 2010), but somehow the items aren't shown... When these users turn off cached mode, it works fine and when they use Outlook 2010
it also works fine, but using Outlook 2013 with cached mode will only show their own items and not the items in an additional shared mailbox.
What is the cause of all this?
Kind regards,
ErikMaybe something interesting...
When looking at article http://support.microsoft.com/kb/982697/en-us
I saw that Outlook 2013 by default caches everything and that's what I wanted. I tested however adding this regkey to see what happened and after that the email shows up in the mailboxes... Somehow the mail from shared mailboxes doesn't want to be
cached...
Does anyone know what this could be? I want everything to be cached, also the shared mailboxes but somehow this doesn't work and it does when using Outlook 2010.... -
Hi
I have Signature Manager Exchange Edition 2.0.3.0 installed on the hub servers.
I have enabled Sent Items update.
some clients are not getting signature update in the sent items of outlook while using cached mode.
from OWA, and MS Outlook when connected online, the signature is updated in the sent items.
I have two CAS servers and two mailbox servers. all with Exchange 2013 SP1
I tested each CAS server for the URLs of Autodiscover and EWS, with no errors or warnings.
I also test Autodiscover through
https://testconnectivity.microsoft.com . I go successful result.
Outlook clients are updated to the latest version 15.0.4701.1000
for outlook clients; I deleted outlook profile, deleted outlook folder in the user profile, re-created the outlook profile, with no luck.
from Exclaimer event logs on the Hub servers. the sent items update is successfully updating clients. below is the screenshot of an event for one email message which is successfully updated from exclaimer but it did not update on the client outlook while
using cached mode.
Since the issue is with multiple users, I am searching for a centralized solution
Mashhour FarajDear Mashhour
Here you go
Employees can see their email signatures and disclaimers
With Exchange 2013, a Microsoft Outlook user can’t see any added email signatures or disclaimers as they are added to an email when it passes through the Exchange server.
Signature Manager Exchange Edition lets email users see their email signature and corporate disclaimer within the Sent Items of their inbox, giving them visual confirmation of the processed email
Source -
http://blog.exclaimer.com/exclaimer-signature-manager-vs-microsoft-exchange-2013/
Updating to the latest version of signature manager exchange edition will help you to resolve this problem for sure
Or you need to contact them to find a solution on this .
I'm pretty much sure that this problem is related with some version mismatch on their s/w on exchange 2013 which is causing this issue.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode
We are using Outlook 2010 with Exchange 2003 server.
Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode.
Recently we find that when user
mailbox reaches its size limit and try to send an email message in Outlook 2010 that is in cached mode, the email message stays in the
Outbox and the Mailbox Cleanup wizard does not start. It just prompts
for "send and receive error". As most of the user would not look for what the error is referring and just call IT to fix. Even worst is, they didn't realize that the mail is still in outbox.
I find the KB2544027 describing this issue but was not available and suggest to install 2596485.
http://support.microsoft.com/kb/2544027/en-us
I've try to install the hotfix and install Office 2010 SP2 but just doesn't work.
Does anyone know how can I fix it?
Thanks!Hi,
Based on my research from the internal resource, this issue has been fixed in build 14.0.6126.5000 or less. I suppose that the hotfix not available because it has been involved in the release.
I’d like to confirm your Office 2010 build number so that we can conduct a deeper analysis on this issue.
In addition, make sure you have installed the latest update for Office 2010.
Best Regards,
Steve Fan
TechNet Community Support -
When use scan mode and FPGA simultaneously, why does the FIFO Read can not be used?
Hello, I am using compactRIO-9025 to do a project and trying to use scan mode and FPGA simultaneously ( Hybrid mode). I have already build a project as the following tutorial.
http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690 and I have NI 9205, NI 9023 in Scan mode and NI 9871 in FPGA mode in the same project.
In the FPGA Target of the project, I add a FIFO and tried to use it to log in data from NI 9871. I wired the module I/O node to FIFO Write in the target vi. However, when I droped the invoke method to the block diagram of the host vi and right clicked it, there is no FIFO Read can be choose. Could you please help me to solve this problem?
Thank you very much!!I am not aware that using the Scan Engine is blocking any access to a transfer FIFO. But please reread this from your quoted KB:
Secondly, the number of DMA FIFO's that can be used in the FPGA code will be reduced, since the scan engine uses two DMA FIFO's. Most FPGAs have 3 DMA FIFO's, so there will only be one DMA channel left to use in the FPGA code.
This means, you have only a single DMA FIFO left which is either Target to Host or Host to Target.
Make sure that you configured the FIFO to be the correct direction for your needs...
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Error in begining a session when using UTF16 mode in OCIEnvNlsCtreate
I wrote this code :
OCIEnv* envhp;
OCIError* errhp;
OCIServer* srvhp;
OCISvcCtx* svchp;
OCISession* usrhp;
envhp = (OCIEnv *) 0;
errhp = (OCIError *) 0;
srvhp = (OCIServer *) 0;
svchp = (OCISvcCtx *) 0;
usrhp = (OCISession *) 0;
int mode = OCI_DEFAULT;
char* dblink=/* DBLINK */;
sword status;
OCIEnvNlsCreate ( &envhp, (ub4) mode, (dvoid *)0,(dvoid*(*)(dvoid ctxp, size_t size))0,(dvoid(*)(dvoid ctxp, dvoid memptr, size_t newsize))0,(dvoid (*)(dvoid ctxp, dvoid memptr))0,(size_t)0, (void **)0, (ub2)OCI_UTF16ID, (ub2)OCI_UTF16ID);
OCIHandleAlloc((dvoid*)envhp, (dvoid**)&errhp, (ub4)OCI_HTYPE_ERROR,(size_t)0, (dvoid**)0);
OCIHandleAlloc((dvoid*)envhp, (dvoid**)&srvhp, (ub4)OCI_HTYPE_SERVER,(size_t)0, (dvoid**)0);
status = OCIServerAttach(srvhp, errhp, (text*)dblink,(sb4)strlen(dblink), (ub4)OCI_DEFAULT);
if (status != OCI_SUCCESS)
return 0;
char username = /username*/;
char password = /password*/;
OCIHandleAlloc((dvoid*)envhp, (dvoid**)&svchp, (ub4)OCI_HTYPE_SVCCTX,(size_t)0, (dvoid**)0);
OCIAttrSet((dvoid*)svchp, (ub4)OCI_HTYPE_SVCCTX, (dvoid*)srvhp, (ub4)0,(ub4)OCI_ATTR_SERVER, errhp);
OCIHandleAlloc((dvoid*)envhp, (dvoid**)&usrhp, (ub4)OCI_HTYPE_SESSION,(size_t)0, (dvoid**)0);
OCIAttrSet((dvoid*)usrhp, (ub4)OCI_HTYPE_SESSION, (dvoid*)username,(ub4)strlen(username), (ub4)OCI_ATTR_USERNAME, errhp);
OCIAttrSet((dvoid*)usrhp, (ub4)OCI_HTYPE_SESSION, (dvoid*)password,(ub4)strlen(password), (ub4)OCI_ATTR_PASSWORD, errhp);
status = OCISessionBegin(svchp, errhp, usrhp, OCI_CRED_RDBMS, (ub4)OCI_DEFAULT);
When I use OCI_UTF16ID in OCIEnvNlsCreate it gives me an error in OCISessionBegin. But when I use 871(utf8) instead it works properly. Why does this happen? How can I work whit OCI_UTF16ID?Re: OCIObjectSetAttr() and UTF16 environnement might be of interest, even though it's a little different. Still relates to UTF16 though. --DD
-
[SOLVED]Netcfg works great manually, but when using the daemon it wont
I installed netcfg a really long time ago following the arch wiki. When I first installed it and set everything up, it was all working perfectly.
For the past three or four months Ive been having problems where netcf daemon is failing to connect (home wireless network 256bit wep). It takes about 20 seconds just waiting and eventually says failed. If I log in and run the command manually (sudo netcfg home-wifi) it connect perfectly fine every time.
Ive tried everything I can think of including different QUIRKS and changing permissions on the profiles but nothing works. I also tried using the netcfg menu but it doesnt work like that either. I went over the wiki page again thinking something might have chnaged, but its all the same. I even reinstalled and configured again but still nothing.
heres my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi-cpufreq cpufreq_ondemand vboxdrv loop)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Arch"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="dhcp"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(home-wifi)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng crond hal cpufreq !network net-profiles @netfs @alsa @sensors @mpd)
What gets me is that it actually takes longer to fail then it does when I manually connect. It times out for like 20 seconds, but when I manually connect its almost instantaneous.
Last edited by tjwoosta (2010-03-02 05:31:37)I had arch installed on my Sony VAIO, had this problem, and then fixed it somehow. That was several months ago, recently I fried the laptop so I just reinstalled and can't remember. But now I have a "solution" haha
this is kind of silly how I got it to work, though.
I created another profile "home-wifi-boot" with a short timeout, this is called from rc.conf.
then I put "/usr/bin/netcfg home-wifi" in my /etc/rc.local , which is exactly the same but has a 30 sec timeout.
This just does the same thing as I was doing manually, runs netcfg a second time. It works for me!
Last edited by jamba (2010-02-14 15:30:58) -
Network loss when use sleep mode in windows 7
Dear Expert
I have problem about windows 7 as below,
when I use windows 7 Professional in Toshiba Notebook
1. A network being cut when it becomes the sleep mode.
2. Have to restart the Notebook to connect Network again.
I'm not sure that it is feature of Windows 7 or not?
Could you please to help me solve problem ?
Thank youHi,
Yes, clear "Allow the computer to turn off this device to save power" in the properties of network adapter\Power management as mentioned in the link provided by arnavsharma, and check if the issue persists.
Yolanda Zhu
TechNet Community Support -
Ps CC: Color Shift On Second Monitor When Using FullScreen Mode
I have been suffering from a new issue since re-calibrating my external NEC Multisync monitor with an i1 Pro calibrator.
Though colors across the system as a whole are improved over similar calibrations with a SpyderPro4, whenever I use the full-screen mode in Photoshop CC (using the F key), the color shifts radically red.
I have tested the other solutions of disabling graphics processing and OpenGL/OpenCL to no avail.
Some testing has revealed that in full-screen mode the colors most-closely resemble the profile for the connected Macbook Pro Retina.
Is Pshop loading the wrong ICC profile just when switching to Fullscreen? I can usually get the correct profile back if I command-tab to another program and back again, but this is an unnecessary workaround.
Any advice would be much appreciated.
Alexthis kind of thing just cannot happen with a high-end Eizo or NEC PA - with these units, there is no video card calibration LUT at all, because it's handled internally in the monitor.
Dag, that's what we expect. But why are the LUTs on the graphics card slightly modified?
The programs Display Profile, Calibration Tester (and Calibration Loader) belong to the GMB ProfileMaker package.
Best regards --Gernot Hoffmann
P.S.:
Perhaps it works like this:
In advance to an actual calibration by ColorNavigator, the program writes these modified values with
equal "deviations" for R,G,B into the graphics card LUTs. Either as a marker or as numerical preparation
for the hi-res correction in the monitor itself. -
RT: 9512 modules fault when using hybrid mode
Hello, I am having an issue with my cRIO hyrbid setup. I am currently using Labview 2010, cRIO 9074, x1 NI 9234, and x3 NI 9512.
Summary:
What you are trying to accomplish?
-I have built two VIs. One that acquired data from an NI 9234. This vi is the one that uses the FPGA due to 51.2kHz sampling frequency needs. The other is to control the motion and encoder reading of three NI 9512s (scan mode). They both work fine separately (on the same FPGA bitfile), but when I copy and paste the VI for the NI 9234 into the VI for the x3 9512s and click run, the motors fault out.
What steps are necessary to reproduce any problems?
click run on the attached (prepared program_2VItesting.vi).
What steps, if any, you have taken to solve any problems and the results of your attempts
-I have confirmed that if i run the two VIs separately, they work fine. The very first time i combine the two VIs the 9512s work for a second (i.e. the motors move a little). Then it faults. I then used distribution manager to clear the fault and run it again (note: there is no fault code, i just clear the red light on the module by changing to configuration mode then active mode). Every time after the first time the motors do not move at all.
- I have confirmed that i did correctly setup the hybrid mode based on this kB:
http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690
I have attached the vi of the two VIs combined together(prepare program_2VITesting.vi). The top half is the copied and pasted FPGA program (as noted by the open VI reference) and the bottom is the scan mode (as noted by the timed loop). I also attached the seperate VIs (JustDAQ and prepared program) that can both function right now by justing pressing run.
Am i just missing something simple here?
Thanks,
Troy
Solved!
Go to Solution.
Attachments:
prepared program_2VITESTING.vi 1369 KB
prepared program_ThisWORKS.vi 445 KB
JustDAQ.vi 930 KBHello Troy_B,
Thanks for the post, here is a useful KB describing how to use Scan Engine and FPGA simultaneously. Please take a look at this documentation and make sure you have everything configured correctly for Hybrid Mode.
http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690
Note:
Hybrid Mode has longer compile time because the compiler has to combine the RIO Scan Interface bitfile and the FPGA code into one bitfile.
The number of DMA FIFO's available for FPGA code is reduced since the scan engine uses 2 DMA FIFO's.
Here is an example of what your final project should look like with Mod1 in Scan Mode and Mod2 in FPGA Mode:
Hope this helps!
Paul-B
Applications Engineer
National Instruments -
Reset When Using Landscape Mode
Has anyone else experienced resets while viewing Safari in landscape mode? Resets back to home screen. Same thing happens with some of the appssuch as eBay, not in landscape mode.
Howdy Scott,
If I understand correctly the left side of the keyboard when you have it showing stops responding in landscape mode until you rotate it to portrait, then back to landscape. Otherwise the left side of the screen works fine outside of the keyboard. From what I gather, this would indicate to me a software issue, so I would start by quitting all the running apps on the device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes and then restore it as a new device and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I can update FF while in admin mode but when I switch back to my user log-in it says I still need to update and has been this way since 3.6 at least.
FF is also leaving ghost images from other apps as it is shut down you can see, not sure if it is a memory leak or what but it is a little annoying.That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "
Maybe you are looking for
-
Short Dump while activating Transformation through Program
HI All, I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE. However while i can activate single Transformation but if run without selection, I am getting this dump. Short Description of Dump - Catego
-
How do I get Finder to show thumbnail icons of symlinks to images?
For some reason, even when I have icon preview enabled, instead of showing the thumbnail of the image, it shows a generic JPG icon with an arrow. This is really frustrating because I need to be able top see thumbnails of all my images at once, so I
-
Hi I am brand new to SAP/ABAP and I am struggling to get rid of a warning I get for a piece of code. Any help would be much appreciated. Cost Center Cutback object has warnings performance check: (1). <b>Generically Buffered Key Area for Table CSKS
-
Hello all, I seem to be having a bit of nightmare of a time figuring out how to do the following in bluetooth: Scan for bluetooth devices - This i can do. Connected to a bluetooth device - This i can do. Send TCP packets over the internet via the blu
-
Troubleshooting the J2EE-Adapter Engine PDF
Hi, anyone has: Troubleshooting the J2EE-Adapter Engine.pdf presentation from the webinar ? if so can you give me the link? (it's not available on the https://www.sdn.sap.com/sdn/webinar.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.sdn.wcm.compoun