Manual infiniband installation -  ib_sdp not found

I've asked oracle support for a guide on how to do this but they aren't being helpful. Before upgrading to 2.6.32-300.7.1.el5uek I had to remove all the infiniband drivers now I'm trying to get it working again. Everything worked previously.
Installing all the ofed packages manually results in this error when starting openib:
/etc/init.d/openibd start
Loading OpenIB kernel modules:FATAL: Module ib_sdp not found.
Failed to load module [FAILED]
Next, I tried building iso using the ofed script: ./mlnx_add_kernel_support.sh -i /root/MLNX_OFED_LINUX-1.5.3-3.0.0-rhel5.5-x86_64.iso
It fails with:
Note: This program will create MLNX_OFED_LINUX ISO for rhel5.5 under /tmp directory.
All Mellanox, OEM, OFED, or Distribution IB packages will be removed.
Do you want to continue?[y/N]:y
See log file /tmp/mlnx_ofed_iso.16910.log
Building OFED RPMs...
ERROR: Failed executing "MLNX_OFED_SRC-1.5.3-3.0.0/install.pl -c /tmp/mlnx_iso.16910/ofed.conf --kernel 2.6.32-300.7.1.el5uek --kernel-sources /lib/modules/2.6.32-300.7.1.el5uek/build/ --builddir /tmp/mlnx_iso.16910 --disable-kmp"
Any help is greatly appreciated. I would love for someone to point me to a manual that includes all these installation takes, including how to build the sdp module for your kernel.

Yes but only because oracle support told me to try that today. And yes now openibd starts but with a new error but I can't ping the other server via the private infiniband interface.
# /etc/init.d/openibd start
Loading OpenIB kernel modules:FATAL: Error inserting ib_iser (/lib/modules/2.6.32-300.7.1.el5uek/kernel/drivers/infiniband/ulp/iser/ib_iser.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Failed to load module [FAILED]
How did you know to install ofa? What document do you refer to for this information?
# /etc/init.d/openibd status
Low level hardware support loaded:
iw_cxgb3 mlx4_ib
Upper layer protocol modules:
ib_srp rds ib_sdp ib_ipoib
User space access modules:
rdma_ucm ib_ucm ib_uverbs ib_umad
Connection management modules:
rdma_cm ib_cm iw_cm
Configured IPoIB interfaces: ib1
Currently active IPoIB interfaces: ib1 ib2

Similar Messages

  • I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

    hello,
    And thank you in advance.
    I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
    I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP.  I've ordered the Windows 8.1 backup media.
    Any way to proceed?
    Thanks  Tim

    download the win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    then start over. install on to your usb along with the support software.

  • Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

    I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
    I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
    Thanks  Tim 

    You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
    Boot Camp Community

  • Windows 7 Ultimate 64 bit Lion "Installer disc not found." What gives?

    I'm trying to install Windows 7 Ultimate 64 bit on a Late 2008 MacBook Pro running Lion. When I get to the partition step I get the message "Installer disc not found." I am logged in as an admisitrator. I'm using a brand new store bought DVD. Any advice?.

    Hello @rossinnit and welcome to the HP Forums!
    I'd like to help you get the Deskjet 2542 installed on your Windows 7 PC
    I'd recommend that you download and run the HP Printer Install Wizard, and that will seek out the drivers online (from the HP web page) and download them for you and then start the install as well.
    With that tool you can plug in the USB cable when it asks near the beginning to find the right drivers.
    Let me know how things go for you!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HT1926 i cannot install itunes 11.4 and it says that dll to finish the installation is not found

    so im trying to reinstall my itunes and there is a message saying that the dll to finish the installation is not found. so i need to contact the support. can anybody help me with this problem please.

    Hi Dimas Muchammad,
    Thanks for visiting Apple Support Communities.
    If you are installing iTunes 11.1.4 on Windows and receiving an error during installation, the specific troubleshooting steps in this article can help:
    iTunes 11.1.4 for Windows: Unable to install or open
    All the best,
    Jeremy

  • R installation R not Found error

    Hi Gurus,
    I am trying to install R enterprise Server on Windows XP. I have checked the perquisites and set R_HOME before starting the install.
    However when I run the install.bat it gives R not found error.
    R_HOME environment variable is correctly set as set R_HOME from command line returns the correct path.
    Please advice.
    Thanks

    Henry,
    <tt>OREbase</tt> is just one of the packages that ORE needs. To complete the installation you will need to install the same way the following packages: <tt>OREeda_1.1.zip, OREgraphics_1.1.zip, OREstats_1.1.zip, ORExml_1.1.zip, ORE_1.1.zip</tt>. Additionally, you will need to install supporting packages from *"Oracle R Enterprise Client Supporting Packages for Windows Platform"*. It contains the following three packages: <tt>DBI_0.2-5.zip, png_0.1-4.zip, ROracle_1.1-2.zip</tt> under <tt>bin</tt> sub-directory.
    Then you can run ORE. Before issuing <tt>ore.connect()</tt> you should load ORE by doing <tt>library(ORE)</tt>. For the database that is running locally you can do something like this:
    library(ORE)
    ore.connect("scott", password = "tiger", conn_string = "")
    ore.sync()
    ore.attach()
    ore.ls()If you have any tables or views in your schema <tt>ore.ls()</tt> will show them.
    Denis

  • "installer actionlist not found" wxp firefox

    Have uninstalled old flash player, have checked minimum system requirements...get the same error on install "actionlist not found"
    What am I doing wrong ?
    Thanks.

    Hi,
    Could you try installing via the appropriate stand alone installer found at this location and let me know how it goes?
    http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins tall_in_a_firewall_proxy_server_environment
    Thanks,
    Chris

  • SQL Server Express 2012 Installation File Not Found

    The installation is failing with the following log information found in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\[log folder]\Detail_ComponentUpdate.txt
    First, with no luck installing from the downloaded .exe file, I extracted it into its own directory and clicked the “setup” file within the extracted folder structure.
    Log information in the Detail_ComponentUpdate.txt log file shows that the installation was succeeding until it hit a long series of "does not exist" statements. When
    I cross-checked the start directory in the path to the "does not exist" file in the log file, and the actual directory tree structure (in the installation folder that was extracted), I notice that it is looking for files within its own installation
    directory that are there, but in the wrong path. For example “File 'C:\SQLEXPR_x64_ENU\x64\setup\sql_engine_core_inst_msi\x64\sql_engine_core_inst.msi' does not exist”. Of course it doesn’t.
    That’s because the second x64 directory in the path doesn’t exist. The file is there, just not in an additional x64 directory.
    What needs to be done to remedy this?
    Thanks

    Hello,
    Please share with us the summary.txt log file. The following article may help you locate the file on disk.
    http://technet.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
    If you can share the set of log files described on the article too or at least share the Detail.txt log file it would be better. You can put them on the Public
    folder of your Skydrive (Skydrive.live.com) and share with the address of that Public folder.
    Thank you in advance.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Vista Home installer disc not found after partitioning

    I don't get an error message but the "installer disc could not be found" message comes up every time I click on Start Installation in Boot Camp and the disk ejects. I repartitioned and am up to date on 10.5.1. I tried setting the partition from 32 to 64 with a 32 bit new Vista Home Premium one disc . I just got the iMac and haven't ever run boot camp before.
    Next steps?
    Thanks,
    Steve

    Actually, Windows Anytime Upgrade is a mechanism built in all Vista editions except Ultimate (where it works slightly differently). It allows you to upconvert your present flavor of Windows into one of the upper-tier editions for a fee.
    If you have Home Basic, Anytime Upgrade will let you go to Home Premium or Ultimate (you can do this in one jump, or two if you go to Premium first). Business users can only jump to Ultimate.
    If you already have Ultimate, you can't go further, HOWEVER, you are entitled to two Home Premium upgrade licenses for other machines (which, incidentally, can be used on Macs provided the Macs are already running XP Home)
    The 32/64 question gets decided only at the time of your original Vista purchase. Home users have to trade up to 64-bit (via mail-in) if they want it. Business and Ultimate users get the 64-bit version in the box. System builders can pick any single flavor in either 32- or 64-bit, but not both. The only other catch-22 here is that driver support is very spotty for the 64-bit version. Apple provides no support whatsoever for 64-bit Windows, but others have tried to cram together varying degrees of 64-bit support on Macs.
    Nate

  • Using Boot Camp to Install Windows 7.  Keep getting error message "Installer Disk Not Found"

    I'm partially throught the Boot Camp set-up process and keep getting the same error message when trying to install Windows.  The disk is in the drive, not sure why it's not recognizing it.

    I had this problem on my brand-new Mac Pro, but fixed it in my case by burning another copy of the installer disc (from the official download image, not a pirate copy lol) at a SLOWER speed, rather than allowing it to burn at the "maximum possible" setting. This gives the laser more time to properly record, but it didn't perceptually increase the time it took to burn the disc.
    I speculate that error-checking is too stringent, but weak; that is, not intelligent enough to correct any read errors. Of course, Apple's test configurations are likely using commercially-produced off-the-shelf discs rather than burned from downloads or they know to never use max speed out of habit.

  • SCCM Manual Agent installation is not Working

    We have SCCM 2012 SP2 , when we deploy SCCM client Agent manually it is not reporting back to SCCM console
    Error: i could see Client ID Manager Startup.log
     Failed to refresh site code. Error: 0x8000ffff

    Did you check ccmsetup.log file on the client machine ?
    Have you created System Management Container and assigned full permissions on it for your SCCM server ?
    In the Control panel-> Configuration Manager ->Action tab -> What policies do you see ?
    SCCM 2012 R2 Step by Step Guides
    Prajwal Desai, http://prajwaldesai.com

  • ITunes/Quicktime Installation FAILS... Installation source Not found

    Please help.  Everytime I try to install ITunes or Quicktime, it says installation source cannot be found. 

    Hello Need_Help_Now_Please_TY,
    The following article should be helpful in getting iTunes and/or QuickTime to install successfully.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Cheers,
    Allen

  • I need help installing itunes 10.3. Says installation program not found??

    I keep tryin to download/install itunes update. When it gets to install, computer says the program i am trying to use to install this does not contain an itune installation. Pick another program that does!!!  Im not computer savvey. I dont know what to do at this point

    Download the iTunes installer from:
    http://www.apple.com/itunes/download/
    Save it on your PC before attempting to install it.
    Put the full text of any error message in your next post including error numbers.
    If you prefer you can paste an image of the error into you post.
    Press alt prtscrn while the focus is in the error message, then use the little camera at the top of the forum editor to insert the image. (I hope alt prtscrn works in XP, I can't test it myself).

  • I am trying to install windows 7 on my macbook pro ......when i press install button it shows "windows installer disk not found"....though it is clearly visible in finder

    please help

    This is the Macbook Pro forum. You should try asking your Boot Camp related question in the Boot Camp forum where the Windows/Boot Camp gurus hang out.
    https://discussions.apple.com/community/windows_software/boot_camp

  • Installation folder not found.  Kontaktplayer2 will terminate?  I can't play any of my midi sounds from Garageband.

    Kontaktplayer2 will terminate?  I can't play any of my midi sounds from Garageband what gives?  I downloaded all my midi plugin's to run my M-Audio midi controller, but the patches are gone from GarageBand.  I recently had all my files "Migrated" from my old Macbook to my new one and since I have my new Macbook (only a week old) I haven't been able to use the GarageBand patches.  Can anyone give me advice?

    Matt
    If you did a Restore operation using the current version of iPod Updater and you still get the same results, then you should take it back and get a new one.

Maybe you are looking for