Manual patch application for java/xml files

Hi,
I am searching for a utility similar to FNDLOAD (which is used for applying a ldt file on an environment) which i can use if i need to apply a single or multiple java and xml files onto an environment. The environment that i am referring to here is a dev instance and waiting for the patching windows for testing integration with the R12 applications is very time consuming.
Thanks,
Ankit

Ankit,
A little bit of clarification here: FNDLOAD is a necessary program which loads flat files as data objects in the system whereas in case of java classes, it requires to be copied. Again, page and region, xml will need the import process for upload to MDS, while VO, EO just needs to be copied.
So in all, you can write a script to copy the relevant java class files and XMLImport command for xml files.
--Shiv

Similar Messages

Does MI client Patch work For meRepMeta.xml file.

Hi All,
Every time I create a patch it works fine for JSP & Contollers but it dont replace Views, images & properties files.
Now a new change cameup it happened to make changes to lot of view files including meRepMeta.xml file as there are changes in Sync BO itself.
Can some body advice, does the patch work to replace this or not, else a feasable solution as we cannot reconfigure all the Devices on site.
Your help is much appriciated.
Thanks & Regards,
Sai Krishna. K

Dear Sai Krishna,
It is normal, not an issue. It sometimes depends on different factors. Generally 2-3syncs are required to get the full data after client data reset.
Regards,
Veera
Additional Non-Conslusive Info for understanding:
Though there is no official wording, and just general recommendation of 2-3 syncs, we can derive (though I cannot term for sure) the general way of working of the sync mechanism from the default value of the below parameter setting. This setting comes when you "Allowing the Creation of Setup Packages" in your server":
Parameter: NO_OF_SYNC_TO_GET_MASTER_DATA
Description:
Optional. Number of synchronization
processes required to download the
initial master data.
Determine the number required by
setting up a test device and checking
the number of synchronizations
necessary for all the data to be
visible following the two initial
synchronization runs (see
Synchronizing for the First Time
). As part of the two initial
synchronization runs, the device ID is
assigned and the application is
transferred. Do not include these
initial synchronization runs in your
calculation. Only take those runs into
account that are used to transfer the
data.
Possible values: Positive integers
Default: 3
Note: I have just copied the table values above from the configuration guide in help.sap.com.

Editing application-j2ee-engine.xml file in Web Dynpro DC

I'd like to set one of my web dynpro apps to automatically start whenever the J2EE engine is started.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/94/0a5b422f786255e10000000a155106/frameset.htm">This SAP Library document</a> states that you can do that in the application-j2ee-engine.xml file. However, I cannot find the application-j2ee-engine.xml file anywhere in my Web Dynpro DC. I've opened the DC in Web Dynpro Explorer view, Package Explorer view, Navigator view, J2EE DC Explorer view and J2EE Explorer view.
Even after expanding all the folders in each view I still can't find the application-j2ee-engine.xml file.However if I search my '.dtc' folder on my hard drive I find the application-j2ee-engine.xml file in the following path:
C:\...\.dtc\1\t\13AA2EFA530FEB42915442D10D7C71A6\gen_wdp
How can I EDIT that file for a web dynpro component/app?
Thanks!
David
Message was edited by: David Z. Pantich to include the link to the SAP Library document

Hi Maksim. I understood that. It's just that I would prefer some method that doesn't require the developers to do something like extracting a file from the EAR file, changing the file and then putting it back in. As you probably know, some developers could handle it and some will most certainly make mistakes.
When they do they come to my group and say "my app doesn't work" and then we have to spend time figuring out why.
Plus, once the developers get used to doing things the automated way they're going to have a hard time remembering to do a manual step each time they do a build.
I have heard that there may be some way to do something similar to this on Visual Administrator. I'm going to investigate that too.
Thanks!
David.

AIR application request a xml file from a server (but only legal users)

Hello guys
I am conceptualizing a project at the moment and I am thinking of using Adobe AIR to develop the application related to that project.
But it depends on the ability of AIR to fulfill my project requirements.
I want your ideas, please...
Imagine, I finished developing my application and compiled the distributed version using Adobe AIR.
And I am going to distribute the installation files of the intended application by burning on to a CD.
Imagine, the user who got that CD, installed it it on his computer and launched the application.
When the application is running, it needs to load a XML file which is saved in our company server.
Since it is an important data file I don't want to dispatch it with the installation CD.
So I am thinking of using URLRequest and URLLoader classes to load this XML file from server dynamically.
Lets imagine I did codes like this....
var request:URLRequest = new URLRequest("http://www.mycompany.com/sereverfolder/blabla.xml");
request.method = URLRequestMethod.POST;
var loader:URLLoader = new URLLoader();
loader.load(request);
But my question is, how safe hardcoding the path for the xml file in the class file as shown above.
Can anyone get access to xml file path by looking into installation files dispatched via CD?
Or is there any other safer way to do this?
Thank you for taking time to read my question and please add your input if you would like to share your knowledge.
cheers

wrong forum.

Best application for cleaning my files

Best application for cleaning my files?

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most users don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

XML publisher report not generating output for huge XML files

Changed Depreciation Projections Report output type to XML.
Defined a Data Definition and a new Data Template (RTF) for this report.
Ran the Depreciation Projection Report to generate the XML output.
Ran the XML Report Publisher report to generate teh PDF/Excel output of the above report.
Output generated for smaller XML files. When XML size is big, the program is running for hours without generating the output.
Teh RTF template is basically a matrix report in which the number of columns in the report is based on the number of periods the report is run for.
The same is not working in the Desktop version also. The system is hanging when i try to view the preview pdf.
The XML file size is approximately 33 MB.
Please let me know if there is any way we can increase the memory size to see the output.
Thanks,
Ram.

for publisher use Category: E-Business Suite

Unable to establish a for loop in custom rtf template for seeded xml file

Hi Experts ,
I am Unable to establish a for loop in custom rtf template for seeded xml file. i am using <?:for-each:G_BSALINE?> FORM FIELD .....<?:FOR-EACH?END> .AM i missing something?
Please help.
Thanks

Hi,
Need more information about your XML data structure; however based on the code you provided, the synax does not look right; you have some colon sign where it is not needed etc... You could use the following (although not quite sure if you want to use Form Filed to group by or just display), but look at the example provided below.
<?for-each-group:G_BSALINE?> FORM FIELD .....<?end for-each-group?>
Example code:
<?for-each-group:G_INVOICE_NUM;./INV_TYPE?>
xxxxxxxxxx
<?end for-each-group?>
Thanks!

Source Reformat menu item disabled for some XML files, but not all

For some reason, the 'Reformat' option isn't available for some of my XML files (in Source menu it's disabled, in the right-click pop up menu it's not even there). For example in my META-INF folder it's enabled for .wsdl files but not .xml files. In the same project, it's enabled for all .xml files in the WEB-INF folder.
Any idea what's going on?
TIA

Thanks to everyone for their response. But - it is NOT a copyright issue , it is NOT a DRM issue, it is not a Faber College double secret probation encoding issue.
This is a simple .wmv file, that I have copied, burned, created a disk image, made a copy of and sent to the UK, Germany, Ireland and even New Jersey. It has been played on a MacBook Pro, a MacBook, a Dell whatever, a Sony stand alone DVD player, an LG DVD player. At least three nieces or nephews, and at least 2 canines have put it through ISO 9XXX rigors.
The problem is that Apple Quick Time 7 Pro with Flip4Mac Pro "can't handle it"
It opens fine, it plays fine --- but when I try to "output" it via the FILE menu - all of the options
Share ...
Export ...
Export to Web ...
are greyed out.
I know nothing abour codecs and wrappers but I tihnk that this is the problem.
What should I know about the file?
Ffor example, years ago, all you needed to know about a Mac file was the "Creator" and the "Type" - both were 4 character codes. something like ADOB for Adobe and PMK2 for Pagemaker 2.0.
Any help identifying the file and what I can use to get it onto my iPhone will be appreciated.
Thank you.

Correct adapter to use for an XML file

Hi,
My current scenario for our business partner is that we are sending them an 850 and 856 then an XML file.
For 850 and 856, we are using AS2 adapter. For the XML file, could I still use the same adapter? Or I need to use File adapter instead?
My scenario for the xml file is that an IDoc is converted to an XML file. This XML file is then sent to the business partner.
Please advise.
Thanks very much.
Regards,
Lex

Hi VJ,
I just found out that I could also use the AS2 adapter to send the xml file to the trading partner.
Thanks for your kind response.
Regards,
Lex

Import Command for importing XML files to server

Hi All,
Please help me in importing the files to MDS repository.
i am trying to import a xml file from my C:\JDeveloper903\jdevhome\jdev\myprojects\oracle\apps\ar\irec\webui to the server. i have a confusion like from where(location) i should run the command ?? is that is from $JAVA_TOP or $APPL_TOP/mds??? or local drive?
and also i have moved my XML files from local Jdeveloper to server using FileZilla to the location /oraweb/u09/appldev2/oadev2comn/java/oracle/apps/ar/irec/webui in ASCII mode. and then i was using following command to import , from $JAVA_TOP,it says import completed , but when i check from TOAD by jdr_utils.printDocument('/oracle/apps/ar/irec/webui/DownloadPG'); it throws an error - Could not find document /oracle/apps/ar/irec/webui/DownloadPG.
java oracle.jrad.tools.xml.importer.XMLImporter /oraweb/u09/appldev2/oadev2comn/java/oracle/apps/ar/irec/webui/DownloadPG.xml -username "apps" -password apps -dbconnection "(description=(address_list=(address=(community=tcp.world)(protocol=tcp)(host=utx001dod008.uson.usoncology.int)(port=1540)))(connect_data=(sid=OADEV2)))" -rootdir /oraweb/u09/appldev2/oadev2comn/java/oracle/apps/ar/irec/webui
Please suggest me the correct way of doing it..
Your help in this regard is greatly appreciated.
Thanks
Praveen Reddy

Hi,
I believe all your questions are answered in [Oracle Application Framework Personalization Guide|http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115fwkpg.pdf], Chapter 9.
To use the import tool, copy the XML file to the server. It is recommended you copy it to $APPL_TOP/<directory> (for example, $APPL_TOP/personalizations), and run the import command from this directory. For the path, you need to give the full path of the XML file you want to import (for example, if you have copied the file to $APPL_TOP/personalizations, then the path according to your first post should be $APPL_TOP/personalizations/oracle/apps/ar/irec/webui/DownloadPG.xml).
BTW, you can import from your local PC using import.bat file.
I would also suggest you review the following thread for similar topic.
Deploy a custom buid OA page
Deploy a custom buid OA page
Regards,
Hussein

Can we do a Secure FTP for an XML file from ABAP when firewall is enabled?

Hi all,
I have a requirement to send an XML file to an External FTP Server which is out of our corporate network and our firewall is enabled.
I have to send an XML file with Purchase Order details. I completed that with the help of this blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/2657. [original link is broken] [original link is broken] [original link is broken]
Now I need to FTP the XML file that is generated. How should I be doing this? Can some of help me with this?
I need to do a Secure FTP to the external non SAP server which is out of our corporate network and our firewall is enabled. Can some one tell me if SFTP is possible in ABAP.
This is not a web service. I am working on dropping an XML file in an external FTP serveru2026 I have searched the forums but still in a confusion if weather Secure FTP is possible in ABAP or not when our company firewall is enabledu2026
If some one encountered this situation earlier please help,,,..any help will be highly appreciated.
Regards,
Jessica Sam

Thanks a lot for your valuable suggestions Richu2026
I agree with you Rich that web services would be a better option. But I need to send this file to an external third party and they dont have web services.
They are telling us that either we can send them an XML file or a CSV file in the format that they want. We decided to go with XML file format.
I am done with formatting the Purchase Order details in the format that they want. Now the challenge is that I need to send this FTP file to them and it should be a Secure FTP when our fire wall is enabled,
When you say
1) Run an ABAP program to generate the XML file and put it on the local PC
2) Log into the FTP site via some FTP client, could simply be windows as well.
3) Manually cut/paste the file from the PC to the FTP site.
For Step 1 running ABAP Program can I schedule a batch job?
For Step 2 and Step 3 can I automate it in any other way..if not in ABAP?
Can I advice my company to follow any alternate method in which they can automate this step 2 and step 3u2026if not in ABAP can it be possible in any other way as the third party does not have web services I now have no other alternative.
Please Helpu2026
Regards,
Jessica Sam

XML Question for web.xml file for LiteWebServer

Hi,
I have no clue of wut tags are required in the web.xml file.
Currently the following code is in my web.xml file and i am trying to run servlets that are located under web-inf/*.class
Pls tell me wuts wrong....
Do i need those mime-mapping tags, session and welcome tags.......... ?
Right now i just want those 2 servlets to work
And wut is this encoding ="UTF-8" in the first line of the xml file. Wut does that do... ? ARe there any others
Any help would b greatly appreciated
Thanks
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app id="WebApp_1">
<display-name>PDMPortal</display-name>
<session-config id="SessionConfig_1">
<session-timeout>60</session-timeout>
</session-config>
<mime-mapping id="MimeMapping_1">
<extension>htc</extension>
<mime-type>text/x-component</mime-type>
</mime-mapping>
<welcome-file-list id="WelcomeFileList_1">
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>HelloWorld</servlet-name>
<servlet-class>HelloWorld</servlet-class>
</servlet>
<servlet>
<servlet-name>HelloWorldExample</servlet-name>
<servlet-class>HelloWorldExample</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloWorld</servlet-name>
<url-pattern>HelloWorld</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HelloWorldExample</servlet-name>
<url-pattern>HelloWorldExample</url-pattern>
</servlet-mapping>
</web-app>

Try putting your servlets in the WEB-INF\classes directory.

To create a desktop shortcut icon for the application for a jar file

Hi
I have created a jar file for my application. when i double click this jar file, the application opens.
What i want is--
Instead of user clicking on the jar file, my application also has to create a desktop shortcut icon.
If the user clicks on the icon which is on the desktop the application should open.
Please suggest me.
Thanks in advance.

>
Please suggest me.>Launch the application using java webstart. A webstart launch offers things like a splash screen, automatic updates, and desktop integration in the form of desktop shortcuts and program menu items. If the launch file specifies icons, they are used for the shortcuts, otherwise a generic icon is used.
For a comparison between a sandboxed webstart launch and a plain app., try the [Text Width Checker|http://pscode.org/twc/].
While the TWC can run OK within the security sandbox, many applications need to be digitally signed and request extended permissions, to do what they need to do.
STBC is an all-permissions webstart launch.
Edit 1:
And for one that definitely suggests desktop shortcuts (I usually avoid them, in favor of a menu item only), try the sandboxed [demo of the PrintService|http://pscode.org/jws/api.html#prs], which prompts the user to choose.
Edited by: AndrewThompson64 on Sep 2, 2008 10:49 PM

I want to load large raw XML file in firefox and parse by DOM. But, for large XML file the firefox very slow some time crashed . Is there any option to increase DOM handling memory in Firefox

Actually i am using an off-line form to load very large XML file and using firefox to load that form. But, its taking more time to load and some time the browser crashed. through DOM parsing this XML file to my form. Is there any option to increase DOM handler size in firefox

Thank you for your suggestion. I have a question,
though. If I use a relational database and try to
access it for EACH and EVERY click the user makes,
wouldn't that take much time to populate the page with
data?
Isn't XML store more efficient here? Please reply me.You have the choice of reading a small number of records (10 children per element?) from a database, or parsing multiple megabytes. Reading 10 records from a database should take maybe 100 milliseconds (1/10 of a second). I have written a web application that reads several hundred records and returns them with acceptable response time, and I am no expert. To parse an XML file of many megabytes... you have already tried this, so you know how long it takes, right? If you haven't tried it then you should. It's possible to waste a lot of time considering alternatives -- the term is "analysis paralysis". Speculating on how fast something might be doesn't get you very far.

SQL*Loader problem - not efficient, parsing error for big xml files

Hi Experts,
First of all, I would like to store xml files in object relation way. Therefore I created a schema and a table for it (see above).
I wants to propagate it (by using generated xml files), hence I created a control file for sql loader (see above).
I have two problems for it.
1, It takes a lot of time. It means I can upload a ~80MB file in 2 hours and a half.
2, At bigger files, I got the following error messages (OCI-31011: XML parsing failed OCI-19202: Error occurred in XML processing LPX-00243: element attribute value must be enclosed in quotes). It is quite interesting because my xml file is generated and I could generated and uploaded the first and second half of the file.
Can you help me to solve these problems?
Thanks,
Adam
Control file
UNRECOVERABLE
LOAD DATA
CHARACTERSET UTF8
INFILE *
APPEND
INTO TABLE coll_xml_objrel
XMLTYPE(xml)
FIELDS
ident constant 2
,file_name filler char(100)
,xml LOBFILE (file_name) TERMINATED BY EOF
BEGINDATA
generated1000x10000.xml
Sql Loader command
sqlldr.exe username/password@//localhost:1521/SID control='loader.ctl' log='loadr.log' direct=true
Schema
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://www.something.com/shema/simple_searches" elementFormDefault="qualified" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://www.something.com/shema/simple_searches">
    <element name="searches" type="tns:searches_type"></element>
    <element name="search" type="tns:search_type"></element>
    <element name="results" type="tns:results_type"></element>
    <element name="result" type="tns:result_type"></element>
    <complexType name="searches_type">
        <sequence>
            <element ref="tns:search" maxOccurs="unbounded"></element>
        </sequence>
    </complexType>
    <complexType name="search_type">
        <sequence>
            <element ref="tns:results"></element>
        </sequence>
        <attribute ref="tns:id" use="required"></attribute>
        <attribute ref="tns:type" use="required"></attribute>
    </complexType>
    <complexType name="results_type">
        <sequence maxOccurs="unbounded">
            <element ref="tns:result"></element>
        </sequence>
    </complexType>
    <complexType name="result_type">
        <attribute ref="tns:id" use="required"></attribute>
    </complexType>
    <simpleType name="type_type">
        <restriction base="string">
            <enumeration value="value1"></enumeration>
            <enumeration value="value2"></enumeration>
        </restriction>
    </simpleType>
    <attribute name="type" type="tns:type_type"></attribute>
    <attribute name="id" type="string"></attribute>
</schema>
Create table
create table coll_xml_objrel
ident Number(20) primary key,
xml xmltype)
Xmltype column xml
store as object relational
xmlschema "http://www.something.com/schema/simple_searches.xsd"
Element "searches";

Hi Odie_63,
Thanks for your answer.
I will post this question in the XML DB forum too (edit: I realized that you have done it. Thanks for it).
1, Version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
2, see above
3, I have registered my schema with using dbms_xmlschema.registerSchema function.
Cheers,
Adam
XML generator:
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import javax.xml.stream.XMLOutputFactory;
import javax.xml.stream.XMLStreamException;
import javax.xml.stream.XMLStreamWriter;
public class mainGenerator {
    public static void main(String[] args) throws FileNotFoundException, XMLStreamException {
        // TODO Auto-generated method stub
        final long numberOfSearches = 500;
        final long numberOfResults = 10000;
        XMLOutputFactory xof = XMLOutputFactory.newFactory();
        XMLStreamWriter writer = xof.createXMLStreamWriter(new FileOutputStream("C:\\Working\\generated500x10000.xml"));
        writer.writeStartDocument();
        writer.writeStartElement("tns","searches", "http://www.something.com/schema/simple_searches");
        writer.writeNamespace("tns", "http://www.something.com/schema/simple_searches");
        for (long i = 0; i < numberOfSearches; i++){
            Long help = new Long(i);
            writer.writeStartElement("tns","search", "http://www.something.com/schema/simple_searches);
            writer.writeAttribute("tns", "http://www.something.com/schema/simple_searches", "type", "value1");
            writer.writeAttribute("tns", "http://www.something.com/schema/simple_searches", "id", help.toString());
            writer.writeStartElement("tns","results", "http://www.something.com/schema/simple_searches");
            for (long j = 0; j < numberOfResults; j++){
                writer.writeStartElement("tns","result", "http://www.something.com/schema/simple_searches");
                Long helper = new Long(i*numberOfResults+j);
                writer.writeAttribute("tns", "http://www.something.com/schema/simple_searches", "id", helper.toString());
                writer.writeEndElement();
            writer.writeEndElement();
            writer.writeEndElement();
        writer.writeEndElement();
        writer.writeEndDocument();
        writer.close();
registerSchema:
begin
dbms_xmlschema.registerSchema(
'http://www.something.com/schema/simple_searches',
'<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://www.something.com/schema/simple_searches" elementFormDefault="qualified" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://www.something.com/schema/simple_searches">
    <element name="searches" type="tns:searches_type"></element>
    <element name="search" type="tns:search_type"></element>
    <element name="results" type="tns:results_type"></element>
    <element name="result" type="tns:result_type"></element>
    <complexType name="searches_type">
        <sequence>
            <element ref="tns:search" maxOccurs="unbounded"></element>
        </sequence>
    </complexType>
    <complexType name="search_type">
        <sequence>
            <element ref="tns:results"></element>
        </sequence>
        <attribute ref="tns:id" use="required"></attribute>
        <attribute ref="tns:type" use="required"></attribute>
    </complexType>
    <complexType name="results_type">
        <sequence maxOccurs="unbounded">
            <element ref="tns:result"></element>
        </sequence>
    </complexType>
    <complexType name="result_type">
        <attribute ref="tns:id" use="required"></attribute>
    </complexType>
    <simpleType name="type_type">
        <restriction base="string">
            <enumeration value="value1"></enumeration>
            <enumeration value="value2"></enumeration>
        </restriction>
    </simpleType>
    <attribute name="type" type="tns:type_type"></attribute>
    <attribute name="id" type="string"></attribute>
</schema>',
TRUE, TRUE, FALSE, FALSE);
end

Manual patch application for java/xml files

Similar Messages

Maybe you are looking for