Manual Testing of Enterprise services

Hello Colleagues,
Please let me know the different methodes of testing Enterprise services manually.
I have used below methodes :
SPROXY
SOAMANAGER
SOAP UI
Is there any other way apart from the once mentioned above.
Also let me know how to test the non sap services in an SAP environment, for example the standard services are avalialbe in the UDDI how can i test these services in an SAP environment.
Please let me know if you need any further details.
Thanks,
Ajay

Hi Ajay,
SPROXY ---> This t-code is used to generate/create webservices from out of application system(R/3 or ECC system) called OUTSIDE IN APPROACH.Where the webservice will be generated on inbound service interface and we can test the webservice from here.
SOAMANAGER -
> When ever we create a proxy on inbound service interface.we need to implement the method(interface) and logic will be written based on our requirement.The name of the interface will be displayed in SOAMANAGER to make it as WEBSERVICE we need to create endpoint and binding,now it will be exposed as webservice and after that we can generate WSDL file and we can test from WS NAVIGATOR.
SOAP UI : The above exposed webservice or generated WSDL can be tested using the test tool like SOAP UI.
Hope it clears.....
Thanks

Similar Messages

How to test an Enterprise service?

Hi Experts,
Iam very new to this Enterprise Service. I need to test an Enterprise service from my ABAP system.
What is the Pre requistics to test the Enterprise service?
What is the necessity of WS Navigator ,SOAPUI and SOA Manager?
Is SOAP UI need seperate license?
Can you refer documents that has steps to test a Enterprise service from scratch?
Iam in ECC 6 and my system donot have Java stack.
I can locate my service in SOA Manager , I couldnt figure out how to test it?
Help me..
Regards
Karthiheyan M

Hi Karthiheyan,
Start with this very comprehensive end-to-end guide, Enterprise SOA Development Handbook 1.1:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40db4735-02f9-2a10-b198-a888a056bb67?quicklink=index&overridelayout=true]
The guide above will help you understand most aspects around Enterprise SOA / Enterprise Services in SAP. The important thing to understand is that SAP Enterprise Services are shipped in an implemented state but they are not configured, so may exist in ECC 6.0 but can't be used until you configure (setup binding & authorization profiles etc.) & this is where SOAMANAGER is used - Configuration of the web service for use.
WS Navigator & SoapUI are webservice test tools. WS Navigator is shipped with any SAP Java stack & SoapUI is a free test tool. So, once you've configured your webservice for usage, use the URL (with binding) in WS Navigator or SoapUI to test your webservice.
Regards, Trevor

Enterprise Service Operation missing in VC 7.01

Hi all,
I have created a Enterprise service with two operations. When I test the enterprise service in the SOA Manager I see both operations in the webservice. When I use the same WSDL file in a systeem in VC I just get one operation.
Can someone tell me what the problem is?
Kind Regards,
Richard

Hi Radi
Thanks for your post.
Type "run programs made for previous versions of windows" in start menu search, if it gives any result as "Run programs made for previous versions of Windows" then you are able to run that application in compatibility mode through that.
Hope this helps you. If the problem continues please mention for which file types you are trying.
Thanks and Regards
Ananda.D

ESW: Publishing Enterprise services in PI 7.1

Hi,
My Scenario was Webservices to ID
Is WS Navigator is necessary for testing the Enterprise Services.
How to define a service interface in the service registry and if i need to create any purchase order how do and where do i need to import the WSDL file ..
What is Service Registry and what is the differeince b/w the WS Navigator and Service Registry.
Where this comes into picture in PI
regards
Kishore

Hi Gourav,
Thanks Gourav for your valuable reply,
Still i am facing the problem,
When i give the values as of for the above case i am facing with the below error
An error has occurred. Maybe the request is not accepted by the server:
SRT: Authorization denied
The below is the request message
POST /sap/bc/srt/xip/sap/ecc_purchaseorder005qr/310/ecc_purchaseorder005qr/ecc_purchaseorder005qr_binding HTTP/1.1
Host: scc10ykf.rim.net:8010
Content-Type: text/xml; charset=UTF-8
Connection: close
Authorization: <value is hidden>
SAP-PASSPORT: 2A54482A0200B900007363633130796B665F4543445F31303337333037353000000000000000000000000147756573740000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000017363633130796B665F4543445F3130333733303735300000000000000000000063663133383632303838303931316465626338333030316632393665396464322A54482A
Content-Length: 877
SOAPAction: ""
<?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:PurchaseOrderERPByIDQuery_sync_V1 xmlns:ns1='http://sap.com/xi/SAPGlobal20/Global'><PurchaseOrderSelectionByID><SelectionByPurchaseOrderID><IntervalBoundaryTypeCode>1</IntervalBoundaryTypeCode><LowerBoundaryPurchaseOrderID>0000205000</LowerBoundaryPurchaseOrderID><UpperBoundaryPurchaseOrderID>0000205132</UpperBoundaryPurchaseOrderID></SelectionByPurchaseOrderID></PurchaseOrderSelectionByID></ns1:PurchaseOrderERPByIDQuery_sync_V1></SOAP-ENV:Body></SOAP-ENV:Envelope>
This is the response message which i got
HTTP/1.1 500 Internal Server Error
Set-Cookie: <value is hidden>
content-type: text/xml; charset=utf-8
content-length: 1762
accept: text/xml
sap-srt_id: 20090813/090413/v1.00_final_6.40/4A8356473B0B55C5E10000000A51143C
server: SAP Web Application Server (1.0;701)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Header></soap-env:Header><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">SRT: Authorization denied</faultstring><detail><ns:SystemFault xmlns:ns="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/"><Host>Provider</Host><Component>SECURITY</Component><ChainedException><Exception_Name>CX_SOAP_CORE</Exception_Name><Exception_Text>SRT: Authorization denied</Exception_Text></ChainedException></ns:SystemFault><ns:SystemFault xmlns:ns="http://www.sap.com/webas/711/soap/runtime/abap/fault/system/"><Host>Provider</Host><Component>SECURITY</Component><ChainedException asx:root="asx:abap" version="1.0" xmlns:asx="http://www.sap.com/abapxml"><asx:values><EXCEPTION href="#o201"></EXCEPTION></asx:values><asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary"><cls:CX_SOAP_CORE id="o201"><CX_ROOT><TEXTID>0018FE864EEE1DECA69CF9C71ACB337F</TEXTID><PREVIOUS></PREVIOUS><KERNEL_ERRID></KERNEL_ERRID><INTERNAL_SOURCE_POS><PROGID>99</PROGID><CONTID>1077</CONTID></INTERNAL_SOURCE_POS></CX_ROOT><CX_NO_CHECK></CX_NO_CHECK><CX_SOAP_CORE><E_LOCATION><CLASS>CL_WS_SECURITY_PROTOCOL</CLASS><METHOD>AUTHORITY_CHECK</METHOD><ID>0</ID></E_LOCATION><E_TEXT>SRT: Authorization denied</E_TEXT><E_ID>1100</E_ID><E_FAULT_LOCATION>1</E_FAULT_LOCATION><E_AREA>SECURITY</E_AREA><E_HOST>1</E_HOST><E_PROCESS_CONTROL></E_PROCESS_CONTROL></CX_SOAP_CORE></cls:CX_SOAP_CORE></asx:heap></ChainedException></ns:SystemFault></detail></soap-env:Fault></soap-env:Body></soap-env:Envelope>
i am giving the purchase order number lowerbound and upperbound of the range but i am getting this error
Request you to help on this..
Is there any issue with SRT: Authorization error.. (Any Configurations to be avoid this)
regards
Kishore

Examples for Enterprise Service

Hi All
Anyone can you give some examples of Enterprise serivices.
and
Difference Between ES and Functional Module.
Regards,
Raj

Hi,
you can create "normal" web service out of function modules.
Enterprise Services are first modelled in the ESR and then implemented in the NWDS or the ERP.
You can browse for Enterprise Services.. https://www.sdn.sap.com/irj/sdn/explore-es
SAP provides an environment where you can test the enterprise services...
regards

Unable to test enterprise services in SAP SRM 7.0 EhP1

Hi experts,
For my recent project, we have enabled "PI Independent Enterprise Services" business function in our SRM 7.01 EhP1 system. While to trying to test some of the enterprise services, we are facing some error. I am pasting the request message and the response that I got from the enterprise service InternalRequestSRMByElementsQueryResponse_in. While defining the end point, I have used basic authentication settings. Note that I am testing this ES with my own user id and password which is a valid on for the SRM system. Can someone help please?
Request message:
POST /sap/bc/srt/xip/sapsrm/internalrequestsrmbyel/100/sapsrm_internalrequestsrmbyel/sapsrm_internalrequestsrmbyel_binding HTTP/1.1
Host: <host>:<port>
Content-Type: text/xml; charset=UTF-8
Connection: close
Authorization: <value is hidden>
SAP-PASSPORT: 2A54482A0300E60000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000064353632326163306235363431316530383330333030303030323337663833320000000002D5622AC0B56411E0830300000237F832D562EADFB56411E0AD3800000237F83200000001000000002A54482A
Content-Length: 753
SOAPAction: ""
<?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:InternalRequestSRMByElementsQuery_sync xmlns:ns1='http://sap.com/xi/SAPGlobal20/Global'><InternalRequestSelectionByElements><CreationDatePeriod><StartDate>2011-04-01</StartDate><EndDate>2011-07-22</EndDate></CreationDatePeriod></InternalRequestSelectionByElements></ns1:InternalRequestSRMByElementsQuery_sync></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response that I got:
HTTP/1.1 200 OK
content-type: text/xml; charset=utf-8
content-length: 915
accept: text/xml
sap-srt_id: 20110723/194910/v1.00_final_6.40/4E24C49F23184117E1008000097C2FFA
sap-srt_server_info: SRM_100,167 ,http://sap.com/xi/SRM/SE/Global,InternalRequestSRMByElementsQueryResponse_in,InternalRequestSRMByElementsQuery_sync,126
server: SAP NetWeaver Application Server / ABAP 702
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Header/><soap-env:Body><n0:InternalRequestSRMByElementsResponse_sync xmlns:n0="http://sap.com/xi/SAPGlobal20/Global"><Log><BusinessDocumentProcessingResultCode>5</BusinessDocumentProcessingResultCode><MaximumLogItemSeverityCode>4</MaximumLogItemSeverityCode><Item><SeverityCode>4</SeverityCode><Note>Abort occurred; Internal request not read</Note></Item><Item><SeverityCode>4</SeverityCode><Note>Abort The attributes of the user are inconsistent or not defined. See transaction PPOMA_BBP. on Internal request level</Note></Item><Item><SeverityCode>4</SeverityCode><Note>Abort An exception with the type CX_GDT_CONVERSION occur red, but was neither handled locally, nor declared in a RAISING clause on Internal request level</Note></Item></Log></n0:InternalRequestSRMByElementsResponse_sync></soap-env:Body></soap-env:Envelope>

Hi Gaurav,
Thanks for responding. Yes, all the backend config are in place since I am able to successfully run an equivalent RFC (BBP_PD_SC_GETLIST) and another RFC named BBP_PD_SC_GETDETAIL from SE37. The problem seems to be something very specific to the ES. May I request you to run this ES at your end (if possible) and let me know the result possibly with the input and output message similar to the one I pasted in the origincal question.
Thanks in advance,
Nilay

Configure, Test, and Consume an Enterprise Service in SAP CRM ABAP 6.0

Hi all,
Can anyone provide me any document on how to Configure, Test, and Consume an Enterprise Service in SAP CRM ABAP 6.0 (2007) ???

Hi,
there are tons of documents about consuming and producing web services. This question has been also asked on this forum many times. Check for example section eLearning. There are couple of tutorials related to web services. I would start with SAP documentation. The web services are capability of NetWeaver so it does not matter if you have CRM or ERP system. The tools are same.
Cheers

Manual Testing of Asynchrounous outbound services

Hello Colleagues,
Please let me know the various methodes of testing Asynchrounous Outbound Service manually.
Also let me know the steps to test manually to ensure that its working as expected.
Thanks,
Ajay

>
Ajay Hoskote Somashekar wrote:
> Thanks for your reply.
>
> Can i use SPROXY to test outbound service or is it mandatory to build the recieving service.
> Or can i track the messages generated upon the execution of service using SXMB_MONI transaction.
>
> Please let me know on this.
>
> Thanks & Best regards,
> Ajay
Yes, this is a valid choice.

Problem in testing customer SDO service from Enterprise manager

I am trying to test customer SDO service( This is a built in service with SOA Demo) . While testing i face exception given below . There seems to be some proble in resolving data source soaDataSource. I have checked all configuration is correct. In JNDI tree also the SoaDataSOurce entry can be clearly seen. i have face similar problem with JCA Db adapter.
Any suggestion for this problem will be greatly appreciated .
Syed Naqvi
<Jul 19, 2011 10:33:09 AM IST> <Warning> <oracle.j2ee.ws.common.jaxws.JAXWSMessa
ges> <BEA-000000> <Exception while executing the business logic: JBO-27200: JNDI
failure. Unable to lookup Data Source at context jdbc/soaDataSource: Unable to
resolve 'jdbc.soaDataSource'. Resolved 'jdbc'>
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException:
JBO-27200: JNDI failure. Unable to lookup Data Source at context jdbc/soaDataSou
rce: Unable to resolve 'jdbc.soaDataSource'. Resolved 'jdbc'
at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestMode
l.java:575)
at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381)
at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMetho
dBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMet
hodBinding(UIXComponentBase.java:1256)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand
.java:183)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.r
un(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._pr
ocessPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.bro
adcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclu
de.java:102)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.r
un(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._pr
ocessPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.bro
adcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclu
de.java:96)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:7
56)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplicat
ion(LifecycleImpl.java:765)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(L
ifecycleImpl.java:305)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(Lifecyc
leImpl.java:185)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java
:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.j
ava:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter
(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterL
istChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter
.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterL
istChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilt
erImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilte
r(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFi
lter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilt
er.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:1
75)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.
java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java
:203)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangP
refFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.ja
va:542)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:31
3)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUt
il.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.jav
a:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:1
61)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:13
6)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsF
ilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: JBO-27200:
JNDI failure. Unable to lookup Data Source at context jdbc/soaDataSource: Unabl
e to resolve 'jdbc.soaDataSource'. Resolved 'jdbc'
at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(
DispatchUtil.java:260)
at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWi
thDispatch(OperationInfoImpl.java:992)
at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java
:729)
at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestMode
l.java:569)
... 79 more
Caused by: javax.xml.ws.soap.SOAPFaultException: JBO-27200: JNDI failure. Unable
to lookup Data Source at context jdbc/soaDataSource: Unable to resolve 'jdbc.so
aDataSource'. Resolved 'jdbc'
at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException
(DispatchImpl.java:1012)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:803
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationW
ithRetry(OracleDispatchImpl.java:235)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchI
mpl.java:106)
at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(
DispatchUtil.java:256)
... 82 more
<Jul 19, 2011 10:33:16 AM IST> <Warning> <oracle.adf.view.rich.change.MDSDocumen
tChangeManager> <BEA-000000> <ADFv: Unable to find matching JSP Document Node fo
r: RichShowDetail[UIXFacesBeanImpl, id=drqsd1].>
<Jul 19, 2011 11:17:54 AM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-0000
00> <Automatically initializing a DefaultContext for getCurrent.
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initializati
on is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent
To see the stack trace for thread that is initializing this, set the logging lev
el of oracle.adf.share.ADFContext to FINEST>
m_connection-jpss nul

Thanks for the blog Salil.
What ever it is mentioned is already done in SOAMANAGER. Endpoints are available for the service.
Below is the Overview of the service:
Object Status:               Services: 1 / Endpoints: 1
Porttype Namespace:   urn:sap-com:document:sap:soap:functions:mc-style
Porttype Name:             YMTEST_WS
Internal Name:               YMTEST_WS
SOAP Applikation:         URN:SAP-COM:SOAP:RUNTIME:APPLICATION:RFC:710
Package Name:             $TMP
Ok, i have developed 2 web services. One web service in ECC 6.0, where Java stack not available so i provided CRM system Java stack address in the global setting and executed my ECC 6.0 web service which says "No endpoints are found for the Web service"
Following is the URL: http://tuasd06db.tuasw2k.tuaspower.com.sg:8000/sap/bc/srt/wsdl/sdef_YMTEST_WS/wsdl11/ws_policy/document?sap-client=220
The one web service which created in CRM 2007, i can test in the navigator, no problem with that.
Following is the URL:
http://tuasd06db.tuasw2k.tuaspower.com.sg:8002/sap/bc/srt/wsdl/bndg_DE7DA5BA0B3A93F1AF60001A64258BFC/wsdl11/allinone/standard/document?sap-client=220
You can find the URL difference btw the URL's. Do i need to publish the service in the service registry? I thought for testing it is not required.
Now all i have problem with the ECC 6.0 web service.
Cheers,
Madhu

Logon Error Message - Enterprise Services Builder address not maintained

Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.

Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani

Questions on Importing an Enterprise Service Definition into PI via ESR

Hi all,
I 've just created a service definition for BAPI_CUSTOMER_GETDETAIL2 and imported it into ESR and PI (steps below)
1) ERP - Created a Service Definition for BAPI_CUSTOMER_GETDETAIL2 called ZSD_ACCOUNT_GET_DETAIL
2) Configured the EndPoint in SOAMANAGER (tested the service works fine)
3) Published the Service in ESR (cut and paste the WSDL URL into the Publish Wizard in ESR)
--- Question1 - is there a way to publish from ERP directly
   - (something simiar to how in PI Integration Builder you can publish a Sender Agreement
     by opening the Sender Agreement and selecting Sender Agreement -> Publish in SR)
4) Created External Definition for the Message Definitions in PI
    - I did this by downloading the WSDL from the ZSD_ACCOUNT_GET_DETAIL in ERP
    - manually editing the WSDL to remove the policy defintions
    - Imported the external definition into PI
--- Question 2 - Is there an easier way to get the WSDL or XSD in ERP (e.g. from the BAPI without the policy statements)?
--- Question 3 - Is there a way for PI Enterpise Service builder to import the definition straight from ESR (a menu option)?
--- Question 4 - Is there a way to export the WSDL from ESR to a file.
As I said I have it working but it definitely appeared to be a "clunky" process.
Any answers or tips in streamlining this would be appreciated.
Cheers,
John

Hi Mark,
Thanks for your response. I was aware of the functionality and I appreciate the link.
In hindsight I could have used this to import the data structures into the Enterprise Service Builder, which answers Questions 1 and 2.
For Questions 3 and 4, I guess I'm still looking for a better understanding of how the service registry and the Enterprise Service Builder interact.
Right now I'm publishing the service in the service registry and importing external defintions in the Enterprise Service builder.
I think this is cumbersome and ideally would think that the Enterprise Service Builder could "pull" external definitions from the service registry.
Thanks again for clarifying questions 1 and 2. The updated question list is below.
Regards,
John
Question1 - is there a way to publish from ERP directly
- no, instead use the import rfc and idoc functionality built into the Enterprise Service Builder
Question 2 - Is there an easier way to get the WSDL or XSD in ERP (e.g. from the BAPI without the policy statements)?
- Rather than use the WSDL use theimport rfc and idoc functionality built into the Enterprise Service Builder
Question 3 - Is there a way for PI Enterpise Service builder to import the definition straight from ESR (a menu option)?
Question 4 - Is there a way to export the WSDL from ESR to a file.

Error in browser while testing the web service

Hi all
plz help me out in the following problem.
i have generated a simple web services program using netbean. while i am testing the web service i am getting the following error in the browser
Exceptions details : java.lang.RuntimeException: Service Class not generated as expected
javax.servlet.ServletException: java.lang.RuntimeException: Service Class not generated as expected at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.initializePort(WebServiceTesterServlet.java:546) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.doGet(WebServiceTesterServlet.java:158) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.invoke(WebServiceTesterServlet.java:104) at com.sun.enterprise.webservice.JAXWSServlet.doGet(JAXWSServlet.java:233) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844) at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287) at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212) at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252) at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75) Caused by: java.lang.RuntimeException: Service Class not generated as expected at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.initializePort(WebServiceTesterServlet.java:521) ... 29 more
regards
mina

Check this guide for creating a correct WSDL:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
User user need the role SAP_XI_APPL_SERV_USER
Regards
Stefan

PI 7.1 enterprise services: How to find & invoke SAP HCM enterprise Service

Hi all,
in PI 7.1, i read, there is support of enterprice services.
is my current understandings right about PI 7.1 and enterprise services:
1.the standard BAPIs, standard RFC that were provided in R/3 are replaced by standard enterprise services in SAP ECC.
2.a nonSAP application can invoke an enterprise service in the same way as a nonSAP application used to call an RFC in the R/3.
I want to view how an enterprise service of any SAP module can be called by a nonSAP applicaiton.
are there any doc or blog which shows this.
is possible with/wihout PI.
We have follwoing things installed.
1. PI 7.1 SP4.
2. SAP ECC 6.0, i am dealing with SAP HCM module.
are there any enterprise services of HCM available (e.g standard enterprise services given by SAP for HCM module).
basically i want to test whether a nonSAP application like a java application, can it get some info using standard HCM enterprise services provided by SAP.
I explored esWorkplace (http://www.sdn.sap.com/irj/sdn/esworkplace), but it does not display HCM related process components under the column "DISCOVER ENTERPRISE SERVICES".
thanks,
Madhu.

Hi Madhu,
YOu can check this page for simple sample applications for enterprise services consumption:
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=EBF08FD8067241F787448B3EB87DA04E
Check this page for ERP-HCM
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=C6AE1E905D8E11DA36BB000F20DAC9EF
and complete business map here:
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=13C98C60080711DA1503000BCDDC2565&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=
Regards,
Ravi

How to consume an ABAP Enterprise Service in JAVA

Dear colleagues:
I'm kind of confused and need your help.
I have already created a Enterpricse Service (for test) in SE80 and configured it through SOAMANAGER.
Question1:
Here is the WSDL URL I got from SOAMANAGER:
http://ldcihri.wdf.sap.corp:50000/sap/bc/srt/wsdl/flv_10002A111AD1/srvc_url/sap/bc/srt/rfc/sap/z_ws2/000/z_ws2/z_binding?sap-client=000
And here is the WSDL URL I got from SE80:
http://ldcihri.wdf.sap.corp:50000/sap/bc/srt/wsdl/flv_10002P111AD1/sdef_url/Z_WS2?sap-client=000：
The XML file I got from the two URL are different, the former is bigger.
Which URL should I use? thanks.
Question2:
I have tested the 2 WSDL URL through Online SOAP Client - WSDLBrowser.com
But both URL failed the test.
I test the same URL in SOAMANAGER-TOOLS-WSDL Analyzer.
Both URL were OK.
Any idea? Is it because the authorization? I need to input user name and password for WSDL Analyzer.
Question3:
I'd like to consume the web service in JAVA.
Is it possible to consume the service in Eclipse IDE?
(I have tried several times by creating Web Service Client using the WSDL but it always say that the WSDL is invalid.
Or I have to consume the Enterprise Service in NetWeaver Develop Studio?

In addition.
I have already activate the web service.

Error in Enhancing the Standard SAP Enterprise Service

Hi All,
I have enhanced standard SAP Enterprise service, when i am going to test in wsnavigator , I am facing the below problem..
ERROR : Definition of /wsdl:definitions/wsdl:types/xsd:schema[1]/xsd:attributeGroup/xsd:attribute is not correct. Missing top level component (uri: 'http://in.ibm.com/o2s'; name: 'MaterialSerialNumberCollection')."
Please help.
Thanks in advance.
Biplab Ray

Hello,
It looks like there is a syntax issue in your web service definition. Please correct this (SE80) and reactivate the service definition.
Thanks,
Venu

Manual Testing of Enterprise services

Similar Messages

Maybe you are looking for