Manually running request set before dashboard is displayed

Hi!
I'm planning to create custom dashboards, reports, etc. and let us say that the request set runs every 1 hour. What I need is that whenever the custom dashboard is run and already more than 30 minutes have passed during the last request set run, it shall run the request set manually before the custom dashboard is displayed. Is this possible? Can a workflow be used in this situation?
Thanks.

I think your DBA is correct in saying that oracle do take care of data corruption in case of any system failure.
In case of concurrent progmram their is a filed you need to tick, something "Restart in case of system failure" so that oracle take care of any such issue., you can check the parameter.
In case of request set i think if sequencing and all is taken care in good way then i think you should not fall in this situation. Request wizard is good tool to define request sets.
Thanks,
JD

Similar Messages

  • How to Run a Request Set on specific days and at specific hours

    Hi community,
    The question is simple, how to rin a Request Set on Specific Days and at Specific hours?
    Let me explain the scenario.
    E-Business Suite, Release 11.5.9.
    We have a request set under Sysadmin user. This Request set is running 24x7, during all year, and we want to restrict the execution from Monday to Friday since 08:00 a.m. to 20:00 p.m. in order to increase the productivity of our system and more over, to avoid the size increase of a table (OE_EXPOSURE_INTERFACE)
    The Request Set includes 5 Requests:
    10. Workflow Background Process.
    20. GUZMAN: Cálculo metodo pago en pedidos.
    30. GUZMAN: Exposición de crédito externo.
    40. Credit Exposure Import.
    50 Initialize Credit Summaries Table.
    As you can see three of them are standar Oracle Order Management Processes and two of them are custom Oracle Order Management Processes; and the requests must be executed in that order.
    We have just thinking about to create a Custom Manager with a workshift from Monday to Friday since 08:00 a.m. to 20:00 p.m., and include the requests as specialization rules or assigning those request to a Request Type and then include that Request Type as specializated rule, but this does not assure us that the request will be executed in that order.
    Any suggestion?
    Thanks a lot for your answer in advice.
    Luis.

    Hi Anchorage,
    It could be a solution, but not the exact solution that we want. Let me say why.
    With the Request set we have the security that each concurrent request is executed when the prior one finishes; is that to say 20, does not begin till 10 finishes, and 30 does not begin till 20 finishes and so on. The most critical concurrent requests are 40 and 50, cause those are the ones that import an external credit exposure in the OE_EXPORURE_INTERFACE table (40) and are the ones that delete those external credit exposures imported (50). The problem is (and we do not know why) that these actions makes grow the size of the table and each time the 40 and 50 processes takes more minutes to finish. That's why we need to truncate the table in order to avoid the excesive grow of itself.
    Making each process independent, with a begining time and hoping and expecting that the following one does not begin till the prior one ends is not an admisible or realizable solution due to the problem with the 40 and 50 processes.
    So at the end, we need a request set in order to know that each one began when the prior one ends.
    And Due to in order to truncate the table, as I said before, the processes that have a relationship whit it, must be stopped (just the 40 and 50 processes) prior to the truncation.
    So as you see, it is difficult, very difficult.
    Regards.

  • U201CValid Tou201D date set before the date that the report is run u2013 print u201Cnullu201D.

    Hi Experts
    I had a requirement for  the Query, when we executing the through slection screen we will be giving 0fiscyear "from and to" dates. the "Valid to" (0date)  has to check the relation of the Client partner and contract of relationship, if it is within the current date it should dipslay the report with values , if it is out of current date, it should display in the report as "null".
    Logic : This report is based on the u201CClient Partneru201D and the u201CContact ofu201D relationship. If any of these relationships have a u201CValid Tou201D
               date set before the date that the report is run u2013 print u201Cnullu201D.
    Could anyone of you provide the inputs on this.
    Thanks in advance
    Thanks
    Sekhar.P

    IvanLevo wrote:
    Could not find the /Library/Startup Items.
    Good, it shouldn't be there.
    For your Dock problem,
    Go to your Finder "Go" menu choose "Go to Folder" and enter ~/Library/Preferences. Then delete these files then restart or log out and back in.
    com.apple.Finder.plist
    com.apple.dock.plist
    com.apple.dock.db
    com.apple.dock.extra.plist
    Let us know

  • How to schedule a job to run twice within a request set?

    How to schedule a job to run twice within a request set?

    Create one more stage for the same concurrent program.
    Thanks
    Nagamohan

  • Error while Running "Tax Credit Upload" Request Set in Payroll

    Hi Friends,
    Firstly, wishing you all a happy New year.
    I am having an issue with a process, we have received a file from Irish Revenue which is a file with .tfa extension having the Tax details.
    While uploading the file using the "Tax Credit Upload" Request Set, the process spawns 2 more processes and then errors out with the following message in the Log file
    SQL*Loader-500: Unable to open file (99809810AMD.tfa)
    IBM AIX RISC System/6000 Error: 2: No such file or directory.
    If you could help me as to what exactly we are missing in this process.
    With Warm Regards
    Sachin Shirke

    Dear All,
    Due to some changes in Income tax in  the previous records (The 2 employees  mentioned below were inPA 4000 during 01.04.2011 to 30.09.2011) and now they are in PA 2600 pertaining to Pay Roll Area 24 (Pondy API & Pilot Plant)
    Pay roll run processed for11th Period ( February 2012) and the error appears as follows
    u2022     2 employees found error  Assignment to feature 40EPF did not take place appears.  
    u2022     PF arrear amount showing negative value
    Awaiting for your valuable replies
    Regards,
    Pinky

  • Scheduling request set to run in conc manager

    Hi,
    I need to schedule a request set to run in conc manger once every three hours from Mon - Thurs from 4 am thro 6 p.m. I tried to pick schedule on specific days in the conc program submit form - it looks like it will run only once on specific days. I cannot pick periodic scheduling because it will fire on all days once every three hours. How can I do this? Should I need to create a seperate conc manager and create work shift for that manager. How I can make this request set to use that manager to run? Any help is appreciated. This is a high priority ticket to work on.
    Thanks
    Akil

    https://metalink.oracle.com/metalink/plsql/f?p=200:27:9953214638785884271::::p27_id,p27_show_header,p27_show_help:683925.993,1,1
    Thanks for your reply. I asked the DBA's to create a custom concurrent manager and workshift. I think that should work.
    Thanks
    Akil

  • Display/Change setting per dashboard

    Steps
    1) Start at project dashboard.
    2) Click "User Settings" button.
    3) Look at "Processing Mode" option.  It has two values in the drop down:  Display and Change.
    We are of the understanding that if we make the setting for this field "Display" then whenever we enter a project or task we will be in display mode and not able to edit until we click the "Display/Change" toggle button that displays when we are looking at a project element.
    Our team is wondering if we could make this setting such that a user is always in display mode when they enter a project from the project dashboard.  In addition to this, we always want a user to be in change mode if they enter a task from the task dashboard.
    Is anyone aware of a way to make this display/change user setting dashboard specific?
    Thank you,
    Wendy

    Hi
    You can do this setting while maintaining the user. This settings are user specific.
    goto SU01=>enter your user=>Personalization tab=>double click the Personalization object key DPR_USER_SETTINGS=> One new window will open in that under General you can define the Processing mode either Display or Change as per your requirement.
    Please try with this.
    Regards
    Yogesh
    Please award points if answer is useful
    Edited by: Yogesh  Pande on Nov 19, 2008 11:31 AM

  • How to make the concurrent request set run only once

    Hi Team,
    Ijust have a requirement.
    At a time only single concurrent request set should be running and the remaining submitted request sets should be in pending status.
    I mean to say : i have a concurrent request set : "Invoice Req Set"
    If user submits the request set multiple times: Invoice Req Set once
    the second one should not be running until the first request set : "Invoice Req Set" completes.
    Any suggestions ??
    -Sridhar

    Hi;
    Please check below which could be helpful for your issue:
    how to prevent multiple request of one conc program
    Regard
    Helios

  • Please Run HRGLOBAL (global) before submitting the Request.

    Hi All,
    When one of the user is trying to run the Concurrent Program.
    He is getting an Error 'Reference data is not available, Please run HRGLOBAL (GLOBAL) before submitting the Request'.
    Oracle Apps version : apps R12
    OS : Solaris Sparc
    Can Anybody let me know why the client is getting this error.
    how to resolve this?
    Any Assistance in this regards is much appreciated.
    Thanks in Advance,

    What is the application release? DB version? OS?
    When one of the user is trying to run the Concurrent Program.What is the concurrent program name?
    He is getting an Error 'Reference data is not available, Please run HRGLOBAL (GLOBAL) before submitting the Request'.
    Oracle Apps version : apps R12
    OS : Solaris SparcLooks like you have to apply hrglobal.drv using adpatch -- See these docs for details.
    Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) [ID 145837.1]
    How to Run DataInstall and Hrglobal for US Legislation Payroll [ID 1061464.1]
    Instructions for Running DataInstall/hrglobal.drv on R12 [ID 414434.1]
    HRMS: On What Server Do I Run The Datainstall Utility And Hrglobal.Drv? [ID 188698.1]
    Thanks,
    Hussein

  • Manually Run iTunes w/ Search Criteria

    I need to know how to manually run iTunes with a search string.
    *What I already know:*
    If I place a shortcut to iTunes.exe in "WINDOWS\system32" and then type "iTunes" in the Run dialog... iTunes opens like magic!
    Is there something I could type in after "iTunes" in the Run dialog to get iTunes to automatically display search criteria?
    *I imagine it would look something like this:*
    +Start > Run > "iTunes /search {criteria goes here}" > Enter+
    Then I imagine iTunes would open with the criteria already entered into the search bar and the library already narrowed down to those keywords.
    Any advice would be greatly appreciated!
    Thanks in advance,
    Eric

    Thank you both for the courtesy of your replies.
    I absolutely will delete there cookies, though I'm guessing if I launch iTunes in the future it will not continue to show/link to their credit.
    I was shocked that they could launch a different application, not just pop up a window withing Safari. I wonder what the potential is for exploits here...
    That is my #1 concern.
    Again. Thank you both.
    It would be a cold day in Hades before I'd buy anything from iTunes after having it open w/o my request...if they'd put a click here to link to iTunes on their page and I clicked through that'd be one thing, but that is just downright slimey!!!!

  • Pass ORG_ID as sql statement for parameter in request set

    We are in a multi-org environment. We are running the request PRC: Generate Draft Revenue for a Single Project as part of the request set. We want the request to automatically fill in the open pa period as the accrue through date. We have been using the SQL Statement below as the value for the accrue through date parameter.
    select end_date
    from pa_periods_all
    where status = 'O'
    and current_pa_period_flag = 'Y'
    Unfortunately that does not limit to a specific company. We a company that still have DEC-05 while another has an open period of JAN-06. This is causing the program fits. How do I pass the org_id to the request? [in beginners terms please]
    Thanks.
    Anne

    No idea what might be wroong without more info...
    Do some output. Test the ${params.id} variable passed to the second jsp. If that is correct, then error is in the select statement or display of jsp2. If it is correct the error comes from jsp1.
    If I have to guess, then I would say the error comes from JSP1, and the ${row.vac_id} should only be called once. In which case I would do something like this:
    //in jsp 1
                <c:forEach var="row" items="${results.rows}"  varStatus="counter"  >
                    <c:set var="vac_id" value="${row.vac_id}" scope="page"/>
                    <tr>
                        <td>${vac_id}</td>
                        <td><a href="vacancydetails.jsp?id=${vac_id}">More</a></td>But that is a guess only...
    Errr... Hold on to that as reference, but the it is entirely likely that I misspelled ${params.id} It may be ${param.id} I forget and away from my machine right now...

  • Setting Default Dashboard based on Groups/users in OBIEE 10g

    Hi,
    I am having a requirement and facing some issues with setting a default dashboard option to the users who ever access the application. Below is the brief description of entire requirement.
    The main requirement is to integrate OBIEE into a .net and silver light application. We will be having a 3 links in the .net application , which in turn displays the OBIEE reports and dashboards upon clicking the 3 links.
    We are using the concept of Init blocks, session variables and Go URL from an OBIEE standpoint for accomplishing this integration requirement. We have also configured LDAP server in OBIEE.
    The issue we are facing is out of the 3 links in .net application, we have one link/icon called dashboard icon which should display bunch of OBIEE dashboard pages in the form of 4 tabs but currently it is showing the My Dashboard home page. For this to achieve to set default dashboard page is to go to My account and change the default dashboard to the desired dashboard and log out and log in back to the application and we will be all set with dashboard pages being displayed upon lcking the dashboard icon but this is manual process for each user as they need to login into the .net application and change the setting s in My Account manually to change the default dashboard setting to the desired one.
    How should I make sure, whoever is logging into the Application (every user) should be able to see the default dashboard pages without changing the options manually by going to My Account.
    The LDAP server is taking care of the Authentication part of the users as every user record is maintained in Active directory which in turn is part of LDAP server.
    To brief high level requirement on single statement is  how to make a default dashboard pages to users based on group in OBIEE. Is there any option in OBIEE, where we can change or set a default dashboard to particular group in OBIEE either in RPD or UI level.
    Appreciate your help on this.
    Let me know if anyone needs any more information in this regard.
    Thank
    Praveen

    You can set 'PORTALPATH'. Have a look at these threads below:
    how to get default dashboards when users logs in
    Re: PORTALPATH for Each Group
    - Bharath

  • Request set not getting picked up by concurrent manager.

    Hi All
    We have an issue today where the daily scheduled request set did not run and status for which remained at "Pending Scheduled". Concurrent Manager did not pick up this and status remained:
    This request is waiting to be processed by the Conflict Resolution Manager.
    This request cannot yet begin execution because other requests may conflict with it. The Conflict Resolution Manager will determine when this request may begin execution.
    User <user_ name> submitted this request on 06-MAR-2011 23:17:33.
    No action required. This is a normal condition.
    This request may have to wait on one or more of the following requests to complete before it can begin execution:
    I checked all the 'incompatibilities" of the programs for request set and none of them were running.
    We did the below, but no success:
    1. Restarted the concurret manager
    2. Cancelled the scheduled run and submitted request set again.
    Still the status remained at "Pending Scheduled" with above message.
    When we tried to run the individaul programs for that request set it all worked fine. So I would like to know what could be the issue and how to overcome this. I think the issue could be with request set as the individual program is working fine.
    Any pointers will be highly appriciated.
    Many Thanks,
    -Shashank

    which manager is Processing that request.. if it is Custom manager Then U should excllude this concurrent program from the concurrent manager.
    otherwise both the Standard manager or custom manager both are not going to pickup the process..
    he
    Please Check The Cocnurrent Manager which is going to process and check wether its included in the respective manager.
    Thanks
    Reddy
    http://11iapps.wordpress.com

  • "Dead" Space before Query Results Display

    We were required to use PL/SQL to create a report within HTMLDB. The report runs fairly quickly and is displayed as desired in the window with one exception. "Dead" space is always placed on the screen before the query results. In many cases, this space is only a couple of lines. In cases where the result set is a few hundred lines, there are a few hundred lines (usually a comparable number to the result set) before the query result. Therefore, the user sees an empty screen and doesn't always know to scroll down several times to reach the output. We are looking for a means to eliminate this leading space.

    To perform the reqired sorting and add a checkbox to each section of the report, using PL/SQL embedded into the HTMLDB was the best method. Within the PL/SQL we used the htp.* commands to format the HTML. Unfortunately, this results in prgressively more empty lines before the actual report display with larger result sets.

  • Add Journal Entries Report - Output to Request Set

    Hi All,
    I'm trying to create a Request Set for the receivable application
    The request set should contains two Programs
    1- AR: Journal Entries Report
    2- Journal Entries Report - Output
    I defined the request set and when i start adding the programs , i selected the first program AR: Journal Entries Report from the list and gave it sequence 10
    when i tried to add the other Report "Journal Entries Report - output" i didn't find it in the list and i'm not able to add it
    1-Do any one know why this program doesn't appeat in the list ?
    2- If i created a copy of this program and gave it other name , this program in the definition doesn't have any parameters although a parameters must be passed to it from the first request AR : Journal Entries report. how to pass parameters from the first program to it
    Best Regards

    nuppara,
    I need to add this report to the request set as it's a workaround to get the output of the AR: Journal Entries Report as Excel - I created a post asking this question also , u already replied to it.
    My workaround is like this , the AR: journal Entries Report automatically sumbit the program "Journal Entries Report - Output" based on the parameters that the user select
    Print Detail By Account , Print Detail By Category , Print Summary By Account , Print Summary By Category
    if i want to to make this report to be an Excel output so i'll have to create 4 templates but won't be able to assign the correct template to it , as the main request AR: journal Entries report calls it automaticcaly, and may run it 4 times
    so my workaround was like this
    i'll create 4 request sets ,
    the first RS will be for example AR: journal Entries Detail By Account, i'll add to it 2 programs the AR: journal Entries Report , and the Journal Entry Report - output -OR a program copied from it with the same design and i'll add parameters to it-
    i'll force the parameters of the AR: Journal Entries in this request set to be Print Detail By Account = 'Y' and the other options = 'N' so the report will call Journal Entry Report - output with the parmeter layout= 'Print Detail By Account ' will be displayed as text ... when it finish the request set will run the Journal Entry Report - output -OR the copied program - that i'll assign the correct template and data definition for it, so it'll run and display the output as Excel .
    I need to try this solution, but i was not able to add the journal Entries Report - Output to the request set :( and i'm not sure if i'll create a copy from it will be added or not,
    and also i'm not sure if this workaround may work , as i know when the AR: Journal Entires report complete it delete the data from the temp table so the 2nd request may work on an empty table , or it'll have a request_id different from the request_id of the temp table so it won't select any row
    all of this is just a brain storming to find the solution. :( i'm thinking by a loud voice here :-D
    i know it may not work but at least to try it i need to add this report to the request set.

Maybe you are looking for