Manually typing in the x and y position values for an object?

Hello,
I work in the vinyl industry and I am working on creating pattern vinyl rolls for people to cut a custom design out of. I set up each beginning pattern "block" at 5" x 5" and I repeat it to 2-3 times across and all the way down to the length of the roll (which can go up to 50 yds). I use the alt key to duplicate each square but I need to make sure each "block" is lined up perfectly to the one beside it seamlessly without any lines or spaces. Is their a way to manually type in the X and Y values of each given block to make sure that I can confirm "technically" and visually that each block is lined up perfectly? I've tried using the smart guides and rulers but even then I get a 1 px line. I have a picture below to help better understand what I mean, the blue guides indicate where the pattern blocks begin and end.
Any help or suggestions is greatly appreciated. Thank You!
-emski

Emski,
If you want to be able to adjust the artwork while you look at the full set (and/or minimize the file size) you may:
1) Select the original artwork,
2) Effect>Distort & Transform>Transform>Move horizontally by the width with the desired number of copies,
3) Effect>Distort & Transform>Transform>Move vertictally by the height with the desired number of copies.
Any change will show across all duplicates (and show whether the transitions work as desired), without the need for deletion and recopying.
You may Object>Expand Appearance if you want separate objects later.

Similar Messages

HT201441 I bought an iphone 4*at*t from a craigslist ad. The seller did not restore the phone and when I tried to do it manually it locked the phone and is now asking for the login info. I contacted the seller and he is not responding. What do i do?

The seller did not restore the phone and when I tried to do it manually it locked the phone and is now asking for the login info in order to do anything with the phone. I contacted the seller and he is not responding. What do i do?

he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

Hey there Luba_kalstad,
It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section down toward the bottom if needed:
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling

Capture the x and y position of a rectangle

Hi,
I'm working on a letting a user draw a rectangle to define a position on the stage. Te rectangle draws out ok. My problem is that I need to convert this dimensions and position of the rectangle in dynamic text. Plus, I need to make a way for the user to save these values into a text file.
Right now, I am able to capture the width and height, however, I can't seem to capture the x and y coordinates of the rectangle. I'd like to get the position of the top left corner if possible.
Here is what I have so far-
//Draws the final rectangle and logs the size and position
var hasRect: Boolean = false;
var rectHeight: Number;
var rectWidth: Number;
var rectXPos: Number;
var rectYPos: Number;
imprintHeightLabel.text = "Imprint Height: 0";
imprintWidthLabel.text = "Imprint Width: 0";
imprintXPosLabel.text = "Imprint X Position: 0";
imprintYPosLabel.text = "Imprint Y Position: 0";
function mUp(MouseEvent):void
mouseHolding = false;
    if(hasRect == false)
    myDrawing.graphics.lineStyle(2, 0xFF0000, 1);
    myDrawing.graphics.beginFill(0xFF0000, 0.2);
    myDrawing.graphics.drawRect(clickedX, clickedY, mouseX-clickedX, mouseY-clickedY);
    myDrawing.graphics.endFill();
    hasRect = true;
    clearTemp();
    rectHeight = myDrawing.height;
    rectWidth = myDrawing.width;
    rectYPos = myDrawing.y;
    rectXPos = myDrawing.x;
    if(hasRect == true)
        imprintHeightLabel.text = "Imprint Height: " + rectHeight;
        imprintWidthLabel.text = "Imprint Width: " + rectWidth;
        imprintXPosLabel.text = "Imprint X Position: " + rectXPos;
        imprintYPosLabel.text = "Imprint Y Position: " + rectYPos;
    else
        imprintHeightLabel.text = "Imprint Height: 0";
        imprintWidthLabel.text = "Imprint Width: 0";
        imprintXPosLabel.text = "Imprint X Position: 0";
        imprintYPosLabel.text = "Imprint Y Position: 0";

Here is what I did to get the top left corner. Now, I am trying to populate that value of the x position into a number stepper and then allow adjustments, but it's not working. I've managed to stave off the IO errors I was receiving, though.
What I want to do is let the user draw a rectangle. Then find the x and y position of the top left cornder of the rectangle along with the rectangle's height and width. These 4 values are updating in dynamic text fields. All of this works now.
However, I want to make it so the user can see the values update in numeric steppers and allow the user to use the numeric steppers to make tweaks. Eventually I want the user to select and place the rectangle too.
Here is what I have so far. The numeric stepper sets to it's default value in the variable, but that's all I've got so far.
import flash.display.Sprite;
import fl.controls.NumericStepper;
//Draws a transluscent rectangle
var temporaryDrawing:Shape = new Shape();
addChild(temporaryDrawing);
temporaryDrawing.graphics.lineStyle(2, 0x666666, 1);
var myDrawing:Shape = new Shape();
addChild(myDrawing);
myDrawing.graphics.lineStyle(2, 0xFF0000, 1);
var mouseHolding:Boolean = false;
var clickedX:Number;
var clickedY:Number;
stage.addEventListener(MouseEvent.MOUSE_DOWN, mDown);
stage.addEventListener(MouseEvent.MOUSE_UP, mUp);
var clickDownY:Number = new Number;
var clickDownX:Number = new Number;
function mDown(e:MouseEvent):void
var tempDownX:Number = new Number;
var tempDownY:Number = new Number;
     tempDownX = e.stageX;
     tempDownY = e.stageY;
     clickDownY = tempDownY;
     clickDownX = tempDownX;
    myDrawing.graphics.clear();
    hasRect = false;
    mouseHolding = true;
    clickedX = mouseX;
    clickedY = mouseY;
//Draws the final rectangle and logs the size and position
var hasRect: Boolean = false;
var rectHeight: Number;
var rectWidth: Number;
var rectXPos: Number;
var rectYPos: Number;
imprintHeightLabel.text = "Imprint Height: 0";
imprintWidthLabel.text = "Imprint Width: 0";
imprintXPosLabel.text = "Imprint X Position: 0";
imprintYPosLabel.text = "Imprint Y Position: 0";
var clickUpX: Number = new Number;
var clickUpY: Number = new Number;
var absYPos: Number = new Number;
var absXPos: Number = new Number;
function mUp(e:MouseEvent):void
     var tempUpX:Number = new Number;
        var tempUpY:Number = new Number;
     tempUpX = e.stageX;
     tempUpY = e.stageY;
     clickUpY = tempUpY;
     clickUpX = tempUpX;
    mouseHolding = false;
    //compares the mouse_down and mouse_up to see which one creates the top left corner position
    if(hasRect == false)
        myDrawing.graphics.lineStyle(2, 0xFF0000, 1);
        myDrawing.graphics.beginFill(0xFF0000, 0.2);
        myDrawing.graphics.drawRect(clickedX, clickedY, mouseX-clickedX, mouseY-clickedY);
        myDrawing.graphics.endFill();
        hasRect = true;
        clearTemp();
            //Comparison Determines if the "ClickUp or ClickDown is at the top left corner
            if(clickDownY < clickUpY)
                absYPos = clickDownY;
            else if (clickDownY > clickUpY)
                absYPos = clickUpY;
            if(clickDownX < clickUpX)
                absXPos = clickDownX;
            else if (clickDownX > clickUpX)
                absXPos = clickUpX;
            rectHeight = myDrawing.height;
            rectWidth = myDrawing.width;
            rectYPos = absYPos;
            rectXPos = absYPos;
            if(hasRect == true)
                imprintHeightLabel.text = "Imprint Height: " + rectHeight;
                imprintWidthLabel.text = "Imprint Width: " + rectWidth;
                imprintXPosLabel.text = "Imprint X Position: " + absXPos;
                imprintYPosLabel.text = "Imprint Y Position: " + absYPos;
            else
                imprintHeightLabel.text = "Imprint Height: 0";
                imprintWidthLabel.text = "Imprint Width: 0";
                imprintXPosLabel.text = "Imprint X Position: 0";
                imprintYPosLabel.text = "Imprint Y Position: 0";
stage.addEventListener(MouseEvent.MOUSE_MOVE, mMove);
function mMove(MouseEvent):void
    if (mouseHolding)
        if(hasRect == false)
        clearTemp();
        temporaryDrawing.graphics.drawRect(clickedX, clickedY, mouseX-clickedX, mouseY-clickedY);
function clearTemp():void
    temporaryDrawing.graphics.clear();
    temporaryDrawing.graphics.lineStyle(2, 0x666666, 1);
xPosAdj.addEventListener(Event.CHANGE, adjustXPosition);
var stepperValue: Number = new Number;
function adjustXPosition(Evt:Event):void
    stepperValue = xPosAdj.value;
    if (hasRect == true)
        stepperValue = rectXPos;
    else
        stepperValue = 0;

What is the best and most stable firmware for wrt1900ac?

I recently got the wrt1900ac and I wabt to update the firmware. What is the best and most stable firmware for wrt1900ac?

The most current version is pretty stable aside the Network Map App which is known to cause a router reboot. Linksys is aware of this and is working on fixing it. Just don't use this app.
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
To safely update FW, I recommend doing the following:
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
My current WiFi settings that are working well are Mixed Mode on both radios, Mixed Channel width on both radios, WPA2 only. Manual channel 11 on 2.4Ghz and 149 on 5Ghz. However those channels for your use will depend on whos near by your surroundings found in the InSSIDer app and you'll need to adjust accordingly to channels that are not being used which are preferred 1, 6 and 11 or (13 for out side of the north america region) on 2.4Ghz. WPS, Media Filter and IPv6 disabled. USB Drive Share, WMM and Media Prioritization enabled. LinksysSmartWiFi is enabled along with mobile access app on Iphone 4S works.

Designing the consolidated and line item report for specific material

Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

Recently I logout from App Store and immediately I logged .after that I clicked the FaceTime and it is asking for signin.so I entered the credentials and clicked on signin .at that I got one pop up like rupees 5 deducted from your carrier account

Recently I logout from App Store and immediately I logged into the App Store .After that I clicked the FaceTime and it is asking for signin.so I entered the credentials and clicked on signin .at that moment I got one pop up like rupees 5/- deducted from your carrier account
from that moment onwards its keep on deducting the amount from mobile money account.its nothing but when I am enable the feature like FaceTime and imessage you are keep on deducting the amount from the carrier account
actually I can use the FaceTime and iMessage through internet right
then how can you deduct the amount from carrier even if the Internet is on in my mobile
can you please resolve this issue asap
iam facing this issue from so many days
but today very frequently the amount got deducted
if you need any information regarding this please let me know
i facing so many problem in my iPhone after installing iOS 7.0
from that time onwards repeadtly facing the performance issues
can you please check it with high priority
actualy now I'm not even switch on the Internet because of money deduction every time of rupees 5/-
one more issue was if iam trying to on the cellular data ,when i on the cellular data I.e., 2Giam not getting the internet
if enable the 3G and off it immediatly then I am getting Internet for that day
one that day if I off and on the cellular data,then it works correctly

Recently I logout from App Store and immediately I logged into the App Store .After that I clicked the FaceTime and it is asking for signin.so I entered the credentials and clicked on signin .at that moment I got one pop up like rupees 5/- deducted from your carrier account
from that moment onwards its keep on deducting the amount from mobile money account.its nothing but when I am enable the feature like FaceTime and imessage you are keep on deducting the amount from the carrier account
actually I can use the FaceTime and iMessage through internet right
then how can you deduct the amount from carrier even if the Internet is on in my mobile
can you please resolve this issue asap
iam facing this issue from so many days
but today very frequently the amount got deducted
if you need any information regarding this please let me know
i facing so many problem in my iPhone after installing iOS 7.0
from that time onwards repeadtly facing the performance issues
can you please check it with high priority
actualy now I'm not even switch on the Internet because of money deduction every time of rupees 5/-
one more issue was if iam trying to on the cellular data ,when i on the cellular data I.e., 2Giam not getting the internet
if enable the 3G and off it immediatly then I am getting Internet for that day
one that day if I off and on the cellular data,then it works correctly

Firefox is having a problem with Linkedin. I get the error, error in parsing value for "backgroun" and for "filter"

When trying to send messages in linkedin, firefox takes me back to the log in screen without sending the message. On the error console it shows the error; error in parsing value for "background" and error in parsing value for "filter". What is causing this?

Pages does not support the Apple font used for color emoji, so that behavior is normal.
With what app are you reading the yahoo mail? There is really no guarantee than any other email service will show the special Apple font involved.
You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
You should also be able to upload graphics here easily by clicking on the camera icon. My email is tom at bluesky dot org.

The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

Ntenich,
If your table has a Header and your Legend text is in the header, it will be picked up by the table.
Jerry

HT4061 Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please

Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please help

The IMEI number is stored in iTunes:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
I can't imagine that any police agency in the world would request this information.

My charger broke so I gave my sister the charger, and my iPod touch for proof. She took it to the apple store and traded it for an iPhone 5c. I was wondering if apple can do something for me so I could get my ipod back?

My charger broke so I gave my sister the charger, and my iPod touch for proof. She took it to the apple store and traded it for an iPhone 5c. I was wondering if apple can do something for me so I could get my ipod back?

I have no idea what you meant by giving your sister your "iPod touch for proof". Proof of what?
The only way she could have traded it was recycling it for 10% off the cost of a new device but the Apple Store doesn't do this as far as I know for iPhones. You could take the receipt for your iPhone to the Apple Store and show it to the manager but you really need to solve this within your family.

How could i get the kernel and user cpu usage for each process

Hi all,
In order to monitor the system CPU usage, I would like write a script to gather the kernel and user CPU usage for each process, like the prstat or top does. As always missing the shortlived kernel usage, prstat or top cann't get the precise CPU usage. I checked with the dtrace syscall, proc and fbt provider, but don't get which one is useful.
Please provide your comments and suggestion.
Thanks in adv

mail2sleepy wrote:
As I've studied the "dtrace" for a while, and seems Sun gives a pretty high score on this new feature.....I do want to know whether there's some probe can work for it, like writing a "dtrace" version prstat.You can write a prstat without dtrace. Because that's just polling at specific intervals and reading some process structures from /proc. You could have dtrace fire a probe every 5 seconds and read the same thing, but it wouldn't really be using any features of dtrace. Trhying to write it "in dtrace" doesn't make much sense.
What you could do that would be harder via other methods is to fire a probe at process exit that displayed the process information including total CPU time. They could print exactly when processes exited. Doing that without dtrace would be very difficult.
Darren

How to Bring the Quarter Period and Previous Month Value for given Input

Hi to all,
      I want bring Quarter Period and Previous Month value for the given Input. Plz help me on this
Example :
Input : 06.2008
Output:
Input     Prev.Month Quarter 1   Quarter 2   Quarter 3
06.2008 05.2008      03.2008     12.2007     09.2008
12.2008 11.2008      09.2008      06.2008    03.2008
Is there any Standad Exit for this or we have to write coding ?
Regards,
Saran

Hi,
You can solve this by using Replacement path.There you have a option offsets.Here give the current period.Based on that give the number which previouse month you suppose to want.
I think this 'll help you
assign points if this helps
Regards
JT Goud

Manually typing in the x and y position values for an object?

Similar Messages

Maybe you are looking for