How to Bring the Quarter Period and Previous Month Value for given Input

Hi to all,
      I want bring Quarter Period and Previous Month value for the given Input. Plz help me on this
Example :
Input : 06.2008
Output:
Input     Prev.Month Quarter 1   Quarter 2   Quarter 3
06.2008 05.2008      03.2008     12.2007     09.2008
12.2008 11.2008      09.2008      06.2008    03.2008
Is there any Standad Exit for this or we have to write coding ?
Regards,
Saran

Hi,
You can solve this by using Replacement path.There you have a option offsets.Here give the current period.Based on that give the number which previouse month you suppose to want.
I think this 'll help you
assign points if this helps
Regards
JT Goud

Similar Messages

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
Vishal Goyal

Hi Vishal,
I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
look article on below link to enable developer dashboard on specific master pages
https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Let me know if this helps.
Thanks
Bhism

How to restrict the user to enter only numeric values in a input field

How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAP

Hi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit

How to find the current CPU and Memory (RAM) allocation for OMS and Reposit

Hi There,
How do I check the CPU and memory (RAM) allocation for the OMS and the Repository database? I'm following the "Oracle Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)" documentation and it says to ensure the following:
Table 3-1 CPU and Memory Allocation for Oracle Management Service
Deployment Size Host CPU/Host Physical Memory (RAM)/Host Total Recommended Space
Small (100 monitored targets) 1 1 (3 GHz) 2 GB 2 GB
***Table 3-2 CPU and Memory Allocation for Oracle Management Repository***
Deployment Size Host CPU/Host Physical Memory (RAM)/Host Total Recommended Space
Small (100 monitored targets) 1 1 (3 GHz) 2 GB 10 GB
Thanks,
J

Hi J,
This is the minimum requirement. However It will work fine.
Also read below article on "Oracle Enterprise Manager Grid Control Architecture for Very Large Sites"
http://www.oracle.com/technology/pub/articles/havewala-gridcontrol.html
For GRID HA solution implementation please read :
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_EnterpriseManagerBestPractices.pdf
Regards
Rajesh

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Records for parameter month and previous month

Hi,
I have a request where the user parameter is calender year month (YYYYMM).I need to show the records of both the entered month and previous month.
For ex: if the user enters 201107, I need to show the records of 201107 and 201106.
Also,I am not using dashboards.
Any suggestion...
Thanks

No, I don't see this as a solution. A session prompt can only be overridden by using a Request Variable, but they are found in Dashboard prompts which you have excluded as a solution. Therefore, any session variable you set would be "hard-coded" eliminating end-user interaction. Sorry.
You will need to deploy dashboards for this. I will also add this: eliminating dashboards really restricts the power of OBI because it makes it difficult to implement interactive reports such as the one you are building. Perhaps you should use this example as a push to consider adding the value of dashboards to your environment.
As this is useful information to others, please mark applicable posts that resolved your question. Thanks.

How to dynamically set Min count and Max Count values in Adobe Print Form?

How to set the Min Count and Max Count values dynamically in a Print Form?
The values when set should over ride the values set in Binding Tab.
This is all needed to print multiple Material Number labels on a single page - and the number of labels to be printed needs to be under user control - something like an Avery Address labels
Please advise.
Thanks,

Here is a work around that works for me and may not be an intelligent solution .
I kept the Min Count to 1 on the subform binding properties.
Per the number of labels required, I appended the same item to the internal table so many times and passed it to the label.
it works fine for my requirement.
However - leaving out the post for a while to see if this can be done at the form level via scripting.
Thanks,

How to tune the threshold to a very low value

Hi,
how to set the thershold to a very low value for database 9i. on which critieria we will tune this thershold value of DB

user606944 wrote:
I/o thershold value?There is no threshold value... unless there is some base line to measure against.
Also, I/O threshold values in what respect? Number of reads/sec? Writes/sec? Latency per I/O call? Number of bytes per second?
A solution is only as good as the problem definition. You have not defined any problem.. thus it is quite difficult to suggest any type of solution to you.

HT5449 How do I get dictation I know when I want the word period and not a full stop.

How do I get dictation I know when I want the word period and not a full stop.

Try the alternatives: "point," "dot," and/or "full stop." Do any of these options produce a period for you? And, as a different punctuation test, does something such as "comma" work for you?

How can I cancel my adobe subscription? I am in the trial period and cannot get any assistance online. This is really annoying

How can I cancel my adobe subscription? I am in the trial period and cannot get any assistance online. This is really annoying.

Hi tokhouse,
Please refer to the help document below:
Cancel your membership or subscription | Creative Cloud
In case of any issues, please contact the support:
Contact Customer Care
Regards,
Sheena

COPA Report current period and previous period issue

Hi Gurus,
I have defined COPA report (Tcode KE94) based on line items. Now I want all values to be displayed based on an entry parameter in terms of period. That is to say that If I give input values of "010.2013" as a period entry , my report should display the values for the the period specified i.e. 010.2013 in the first column and in second column values for the period 009.2013 should be displayed and in the third column values for the period 001.2013 till 010.2013 should be displayed cumulatively.
For this, I choosed the character "period/year" in General data selection tab, clicked "Variable on/off" tab and gave values "From" as well as "To" for the Global Variable "OFP" which is Curr.fisc.per./year.
For the 1st column (1st column which is suppose to display the values according to selection parameter), along with the character "company code" , I choosed the character "period" and clicked "Variable on/off" tab and gave value "From" as well as "To" for the Global Variable "OFP" which is Curr.fisc.per./year.
For the 2nd column (2nd column which is suppose to display the values for the immediately preceeding period of the selection parameter), along with the character "company code" , I choosed the character "period" and clicked "Variable on/off" tab and gave value "From" as well as "To" for the Global Variable "OFP" which is Curr.fisc.per./year. While doing so, I selected operator as "-" and choosed offset as 1.
For the 3rd column (3rd column which is suppose to display the cumulative values from the beginning of the fiscal year till the period mentioned in the selection parameter), along with the character "company code" , I choosed the character "period" and selected 001 in "From" and 016 in "To" tab.
Company Code selected in all the three columns is same and I have selected actual values i.e. 0 for "plan/actual indicator" tab.
When I run the report through Tcode KE30 , I give values as "010.2013" for the From and To selection tabs. System shows the values as per the selection parameter in the 1st column which is correct but display values same as per coulmn 1st in the 3rd column which is wrong because it should be cumulative. 2nd column is blank.
How to display the values for the immediately preceeding period and for cumulative period?
Regards,
makrand

Dear Ajay,
Thanks for the reply. Here are the screen shots.
For the general data selection tab
For the first column "current month" i.e. for the month
For the second column "Last Months"
For the third column "Cumulative" i.e. year to date
Following is the result of KE30
Values for the period 010.2013
You can see that values in the report for the period 011.2013 contains value for the previous period which is 59090.21
This value is matching when the report is run for the period 010.2013.
But in both the reports,the figures for Current month and YTD (year to date) are same.
Please let me know what setting is required in the current month column.
Regards,
makrand

How to change the Validility period of the cost element

Hi All,
how to change the validity period of the cost element. In tranc code Ka02 only the text is allowed to change but i want to change the validity period of the cost element.
best Regards
stephen

Hi All,
Thanks for your response...........
My concern is, i have a document posted to 43100 GL Expense acct, which is also defined as cost element, GL field status G004(cost accts). But when the original document is posted no is no assignment of any cost object.
But i have to reverse the document and when i use FB08, the reversal is popping up with error " Assignment of CO object is neccesaary " Assign the cost center.
Is there any way we can update the cost center for posted docuemnt? if so how? and can i make the cost element invalid for previous month so that it will not ask for cost object and change the field status of the GL from g004 to G001 only for reversal and set it back after posting is done.
Appreciate ur feedback and suitab;le points are rewarded with points.
best

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

How to bring the hyperlink in a JLabel object ?

How to bring the hyperlink in a JLabel object ?
I tried the following--> [ this is a sample ]
JLabel label;
label=new JLabel("<HTML><A HREF='file://D:/Examination/calc.exe'>Calculator</A></HTML>");Using this JLabel object in an JDialog the label comes perfectly with such a look of the hyperlink
[ Blue coloured and underlined ] that's all !!
It doesn't work anything that it should do.
While all the html tags work perfectly in java then why the hyperlink in label doesn't ?
If you have an idea then please send me the code.
Thanks!

see JXHyperLink at https://swingx.dev.java.net/
Yeah, I looked at this. I agree with the other guy who said that all this does, presumably, is change the color of the text when the button is getting mousedover. That doesn't solve anything.
As far as JEditorPane, it has its bad points and ... well, mostly bad points. However that's not really fair. JEditorPane was not designed to be on the level of an IE or FireFox.
The BEST thing to use JEditor's web browsing facilities on is for creating your own documentation and help pages for software you are developing. Here is a list of some of the things JEditorPane does not come equiped with (as of 1.4 I haven't tried playing with it in 1.5):
1. Form submission, PUT, and GET
2. Download status
3. Caching
4. Cookies
5. Plugins (ie Java, Flash, Quicktime)
6. No javascript.
Beyond that it is extremely brittle in parsing the HTML, and if the HTML is not totally well formed (and many pages are not) you won't get anything

How to change the retention period of os watcher log,

How to change the retention period of os watcher log, by default it is 7 days. but in our exadata env. automatically oswatcher logs are deleted , so i want to check the retention period.
Regards,
Ani

Hi Ani,
Go to :- /opt/oracle.cellos/validations/init.d/oswatcher
Open the file "oswatcher" file.check for the line "/startOSW.sh X Y Z". Where X is the snapshot interval
make the change and you are done
Regards,
Sunil Bhola

How to Bring the Quarter Period and Previous Month Value for given Input

Similar Messages

Maybe you are looking for