Manufacture date for the HP laserjet P1505n & P2035n
When where the HP LaserJet P1505n and HP LaserJet P2035n release on the market?
baltwo wrote:
Search much? See http://discussions.apple.com/thread.jspa?threadID=2131363 and http://discussions.apple.com/thread.jspa?threadID=2145258 for starters.
Read much? The P1505 is not listed in either of those threads.
Similar Messages
-
The meta data for the IDoc type "LOIPRO01" is unavailable
Hello,
i'm trying to send idocs via rfc from SAP ERP ECC 6.0 to SAP MII 12.06, but we always get errors like:
The meta data for the IDOC type LOIPRO01 is unavailable
I've checked the parameters on MII side of the IDOC Listener:
Servername MII_JCI33
server Properties
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
progid MII_JCI33
trace 1
params
snc_myname
snc_qop
snc_lib
unicode 1
max_startup_delay
Client Properties
client 303
user RFC-I33
alias_user
passwd
lang en
sysnr 02
ashost h33-i0.rz.k-plus-s.net
mshost H33-I0.rz.k-plus-s.net
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
r3name H33
group
tpname MII_JCI33
tphost H33-I0.rz.k-plus-s.net
type 3
trace 1
codepage 1
There is no saprouter between ERP and MII as in the thread from Christoph Mertins in November 2008. The user rfc-i33 on the ERP has SAP_ALL permissions.
Has anyone an idea ?
Kind Regards,
Thomas StreckerThomas,
There is a link for a basic IDoc installation that may help.
[IDocListener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
One other issue that has occurred to cause problems is registering the program in Visual Administrator. If you registered the ProgID in Visual Administrator, there will now be two ProgIDs registered (MII does self registration with the RFC Destination upon starting the server). Delete the registration in VA, if you did it.
If there are other error messages available, please post them.
Good luck,
Mike
I also just remembered, if you have two ProgIDs that are the same, running on two separate MII instances, you may run into a problem. Not sure it will have the same symptoms or error messages, but something else to check with (especially when migrating from dev to prod).
Edited by: Michael Appleby on Feb 10, 2009 5:02 PM -
Latest firmware version to date for the Kin TWOm.
What is the latest firmware to date for the Kin TWOm? I understand that there may not have been an update in a long time, if any for that matter, but I wanted to check in with what the latest firmware is if anyone here was sure. Then at least we'll all be on the same page about it & update if necessary.
Thank you!
I believe, to check, it's under SETTINGS > ABOUT YOUR PHONE
Looking under "Software version" I think. Mine reads "1.0.1 (4704.0)Daveman80 wrote:
We just received word on facebook that a new version exists with 1.10. Can we get a clarification on this? He even has a picture to prove it! His firmare version says 1.10 (4704.8). My version is exaclty what is listed above, 1.01 (4704.0). How do I get the newest version of the firmware???
Hi Daveman80,
I have checked my resources and I learned that Verizon Wireless has not released a software update for the Kin TwoM. The latest software available for this device is the one you currently have in your phone. Please note that some customers install unapproved Beta software updates on their phones at their own risk. The post you saw on Facebook most likely includes pictures of unapproved software update.
Please be assured that we will push any approved software updates to your phone when provided by the manufacturer. -
Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.MeenakshiI am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi -
Unable to see the data for the hierarchy in rsa3
Hi Gurus,
i am trying to check the data for the standard hierarchy in rsa3,but it is showing an error message saying that error 6 in functional module rss_program_generate.Please help me out.
thanks
bhaskarCheck if this helps seemed relevant
Error 6 in function module RSS_PROGRAM_GENERATE
Error 6 in function module RSS_PROGRAM_GENERATE
error Error 6 in function module RSS_PROGRAM_GENERATE -
How to get the date for the first monday of each month
Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AMUse IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
select add_months(date '2013-1-1',level-1) dt
from dual
connect by level <= 12
select dt first_of_the_month,
trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY. -
How to set the filter on a report to show the data for the Current Month
Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AAYou need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section. -
Query returns data from previous month. Need to have it return data for the entire year
This is the part of the query that returns data by month:
(YEAR(`rereport`.`market_reports_5`.start_date) = YEAR(CURRENT_DATE - INTERVAL 1 MONTH)AND MONTH(`rereport`.`market_reports_5`.start_date) = MONTH(CURRENT_DATE - INTERVAL 1 MONTH))
How can I get it to return data for the year.
TIYHow about omitting the MONTH part:
(YEAR(`rereport`.`market_reports_5`.start_date) = YEAR(CURRENT_DATE - INTERVAL 1 MONTH)
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?
List and table controls -> listbox..is that what you are thinking of?
The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
MTO
Attachments:
Listbox_example.vi 34 KB -
Can we use the AdventureWorks2008R2 data for the real time project.
Hi,
In our project we are trying to do the data scrambling on First name, last name and middle name...
In the regular practice we use to update the names as
First Name = FN+<PERSON_SNO>
Last Name = LN+<PERSON_SNO>
Middle Name = MN+<PERSON_SNO>
The Problem is the names are not looking realistic, so I thought of applying some logic and updating our PERSON table names based on Person.Person table in adventure works.
My question is can we use the AdventureWorks2008R2 data for the real time project. Is there any cop right issue.
Someone please help me solve this issue.
Thanks
Karthikeyan Jothi.Please read this link content:
Adventure Works Sample Site
sqldevelop.wordpress.com -
Clearing date for the payment invoice through APP
Hi All,
I have some payment invoice which falls net due date on sunday so i can't able to run app on sunday(holiday) so i use to run on saturday for getting the discount before the net due date. While paying like this the system is taking clearing date and value date as sunday as per the net due date of the invoice, which is on holiday for the banks instead of what i have given in the payment parameters as saturday.
what can i do for this to get payment parameters date as clearing date for the invoice.
In the payment method for this invoices the payment per due date check box is unchecked in the configuration. If i select this check box is it works for payment parameters date as clearing date.
Please help me on this issue urgent.
Thanks @ Regards
NandhaHi Jigar,
Thanks for ther reply,
that all different issues,
My issue is the user run the payment run on saturday with posting date as saturday which the invoice are due on sunday in the clearing invoice they are getting the clearing date as sunday which is holiday for banks.
So I need to get clearing date as saturday for that net due date as sunday invoices why because i giving the posting date as saturday.
Please suggest me what should i do for this issue.
Thanks & Regards
Nandha -
Using the tcode:S_ALR_87013611, no report data for the cost center
Hi,Friends.I need a help.
In the tcode FB60,i entered the following data and then posted the vendor inovice sucessfully.
data:
( Note: G/L acct:55020141 is also a primary cost element)
In the tcode:S_ALR_87013611,I entered the following data and executed.
but the result is:{Report contains no data. Check the selection log}.
data: { Controlling Area: C999, Fiscal Year: 2010, From Period:1, To Period:12,Plan Version:0,
Or value(s):2001}
(Note: Cost center:2001 belongs to Controlling Area: C999)
please tell me how to do,so that using the tcode:S_ALR_87013611, I can see the report data for
the cost center 2001.
sincerely WenYao Ma
Edited by: wenyao ma on Mar 22, 2010 1:09 PMthank you,friends.
I just solved it.
Solution:
1) Maintain Controlling Area
path:spro>Controlling>Organization>Maintian Controlling Area>Maintain Controlling Area. tcode:OKKP
In the {Activate components/control indicators}cost center should be 'component active'
2) Maintain Number Ranges for Controlling Documents
path:spro>Controlling>Organization-->Maintain Number Ranges for Controlling Documents. tcode:KANK
Element { COIN CO Through-postings from FI} should be assigned to one group. -
How to get the date for the last day of a week?
Is there a easy way to get the date for the last day of week?
eg a week starts on monday and end on sunday
January 11, 2005 is the start date for the week
January 17, 2005 is the end date for the week
or
say
February 26, 2003 is the start date for the week
March 5, 2003 is the end date for the week
I just need a simple way of figuring that out....
I figured out how to get the start date for the week but just can't get the latter..
formatting of the date is not of a concern.. that I know how to do
thanks in advanceHow about something like the following?
Calendar someDay = new GregorianCalendar(2005,0,11);//2005 Jan, 11
//Note above that January is 0, not 1, as counting starts from 0.
someDay.add(Calendar.DAY_OF_MONTH,6); //add 6 days
java.util.Date lastDayOfWeek = someDay.getTime();
//If someDay was the start of a week, lastDayOfWeek should now be
//the last day of that week.
System.out.println(lastDayOfWeek.toString() ); -
Problem in retreiving data for the given user parameter year!!!
hi all,
I am working in oracle report 6i. I want to display the data for the date given in the parameter field(MM/YYYY).
For ex. Input is 07/2007 means i want to display the data from 04/2006 to 07/2007.Please guide me
to get this desire output......
Here is my query.....
select gl_code,financial_month,financial_year,division_code
from gtemp
where financial_year between to_number(to_char(:P_Date,'YYYY')) - 1 and to_number(to_char(:P_Date,'YYYY'))
and financial_month >= '04'
and financial_month < = to_char(:P_Date,'MM')
and division_code = 11
order by financial_month, financial_year
regards,
jame
Message was edited by:
JameWorks fine if u gave values instead of variables.... But if we gave 02 in place of 11 like below.Query will get
confused to take which years 02 because in both 2005 and 2006 we have 02(Feb)thats y.......
how to overcome this prob.......I think, my entire query is wrong to get this desire output....Please guide me how
to solve......
select gl_code,financial_month,financial_year,division_code
from gtemp
where financial_year between 2005 and 2006
and financial_month >= '04'
and financial_month < = '02'
and division_code = 11
order by financial_month, financial_year -
How to know last access date for the schema's
Dear all,
could u plz tell me How to know last access date for the schema’s
Regards,
Srinivasa rao.PSrinivas,
could u plz tell me How to know last access date for the schema’s
In Oracle, we don't access schemas but schema objects.And this informationis not kept anywhere persistantly.As Amit also mentioned,if you do need it,you have to enable Auditing.
Aman....
Maybe you are looking for
-
HP envy 15 Control Zone Trackpad failure
Hi I purchased an HP envy 15 q178ca. After using it for a few hours the track pad started giving problems. However, after resetting the trackpad everything works fine. The problem keeps coming every 40 minutes or so. Such kind of behaviour is not exp
-
How do I get my printer to print faster when I am using my mac with google?
My printer seems to take 3-4 minutes to print something when I print from google. If I am on Safari it seems to print in a few seconds. Is there a way to fix this?
-
Lock Screen feature is interrupting downloads and file sharing
When ever i leave the Macbook pro (non retina) for file download and update, the Lock Screen feature stops the downloads. And it stops the file sharing too. i can't share or sync files while screen lock is active. How i can configure the lock screen
-
IPod Shuffle not restore / format / work!!!! help-me pls!
Hi, I bought a iPod Shuffle 512 MB last week. I used ipod some times, but I had a problem when tried to connect on PC. Windows recognized the iPod as "removable disk" only, when I tried to access its return a message reporting a I/O error or Windows
-
Diskwarrior 4.1 Disc Won't Start Up 10.5
I have a Mac Pro 3.2 running 10.5.2. I tried starting up with Diskwarrior holding the "c" key but my mac refuses to start up from the disc. The computer will start, try to read from the Diskwarrior disc (I assume), it can't find anything to start it