Manufacturing date updation

Hi,
We are using Discreete manufacturing in our SAP system. Currently we are implementing SAP one of our foundry unit. They wants to enter the Manufacturing date at the time of Production confirmation screen. In repetetive system, Tcode MFBF, manufacturing date is availble. But we are using CO11N for confirmation. In that Screen, Dates header is availbe. The Start executin date & Finish execution date field is available.
I want to know, whether i can use this filed for Manufacturing date updation.
Regards
R Vaithiyanathan

Hi ,
You can bring LOBM_HSDAT characterisitc using BMSM traxn. Assign this Char in Batch class of finished material.
CO11n( If you have selected auto goods receipt) or MIGO on production order will update MCH1--> HSDAT field.
You can pullout from table/ batch master data.
Hope it helps,
Jatin

Similar Messages

SLED /Manufacture date update.

Hi Gurus
We have some issue in SLED . Production done and batch is upadate with manufacture date and expiry date. later this was stock tranfered to other plant ( Australia) having received a batch in Australia & updated the manufacture date & expiry date correctly, a quantity of the same sku/batch was, one month later received in India and when they performed the receipt (MIGO transaction) entered different Manufacture date / expiry date, which has apparently updated the dates on the batch details in the Australian plant.
Actually, while doing the MIGO this is update manually, so the the batch is tagged to the wrong expiry date.
Is it possble to control this from manual override, to control the wrong entry.
Santha

No. The receivers need to be trained that if they receive batch from another plant, and it is an SAP batch, they should not update it. They are provided warnings at the time of receipt that the batch already exists which should clue them in. In addition, the manufacture date from Australia should have been correct and the expiration date would be correct anyway. So I would be more concerned about, and inquiring as to how, where and why they got the manufacture date they used instead. Having a mfg. date, and hence the expiration date of a batch is a very serious issue and violation of most company procedures, not to mention of regulatory and customs agencies.
I'm sure there is probably a user exit that can used to check the data before saving. You should check with a purchasing person to check the available user exits for MIGO if you want to go that route.
FF

Header batch manufacturing date to be update after 261 movt of any compane

Dear all ,
we have one requirment in that ....suppose we have one Process order , we done companent batch determiantion
now what happens whenever we do confirmation ..means 101 then Manufacturing date at Header bacth updates , ( the 101 date is set as Manufacturing date. ...Now when we do picking i.e goods issue of any companenet under order , that date shud
be there as manufacturing date for that header batch .
pls suggest.
Regards,
Prerna

Hi Prena,
Could you please post your solution how you acheived this? I have the similar requirement to populate batch manufacturibng date as process order confirmation date.
Your help is appritiated.
Thanks,
Jyoti

Inbound Delivery (DESADV): How to transmit SLED/BBD and Manufacture Date?

Hello
We have another challenging task to solve. Here is the scenario (SAP Release ERP 6.0):
One Lindt company (supplier) sends an outbound DESADV IDoc to another Lindt company (Purchaser). Here the inbound DESADV should create an inbound delivery. Finally, the inbound delivery is replicated to the external WHS partner who does the Goods Receipt against this inbound delivery.
The outbound DESADV contains all logistical data including SSCC. In particular, the batches have a manufacture date (LIPS-HSDAT) and a SLED/BBD (LIPS-VFDAT).
SLED = Shelf Life Expiration Date
BBD = Best-Before Date
In the outbound DESADV the SLED/BBD is mapped by default into segment E1EDL24/VFDAT. For the manufacture date we implemented an user-exit.
How does the inbound delivery look like? The batch number appears as "Vendor batch". The SLED/BBD does NOT show up even though the inbound DESADV contains the date in E1EDL24/VFDAT. This inbound DESADV did NOT contain any controlling segment E1EDL19. Adding this segment (QUALF = 'VDT' = Shelf Life Expiration or Best-Before Date) had no effect.
Here is my assumption why the SLED/BBD does not show up in the inbound delivery created by the inbound DESADV:
Because we do not yet have the "real" batch (just the "Vendor batch") the system ignores any SLED/BBD. As soon as the external WHS partner sends the GoodsReceipt message (as inbound WHSCON ) the inbound delivery is updated with the "real" batch as well as the SLED/BBD.
QUESTIONS:
(1) Why does the SLED/BBD not show up in the inbound delivery created by an inbound DESADV?
(2) Do we need another user-exit to map the manufacture date into the inbound delivery?
Once again thank you for sharing your time and expertise with us.
Regards
   Uwe

Apply SAP Note
Note 1576788 - Transfer of exp. date
(IDOC_INPUT_DESADV1) to inb. delivery
Here are the correction instructions for your reference:
=========================================
FORM DESADV_IDOC_PARSE
Delta001Context Block
        IF NOT t_dlgn-vbelv IS INITIAL.
          t_dlgn-posnv = s_dl24-posex.
        ENDIF.
Delete Block
        mv s_dl24-brgew t_dlgn-brgew.
Insert Block
        mv s_dl24-vfdat t_dlgn-vfdat.                         "n_1576788
        mv s_dl24-brgew t_dlgn-brgew.
Have fun!
- Joemil

Process order release date as batch manufacturing date

Hi All,
We have automatic batch creation during the release of the process order. Now the requirement is that proess order release date should be updated as Batch manufacturing date in the corresponding Batch data (MSC3N). How this can be done.
Regards
Vinamrath

Hi Vinamrath,
Hope your proess order release date and the batch creation date are same.
In such case go to txn CT04 (create Characteristic) and create a Characteristic say "Batch manufacturing date". Then in the tab Addnl data maintain the table name as "MCH1 or MCHA" and Field name as "ERSDA" (created on-this is the batch creation date).
In case your proess order release date and the batch creation date are not same, then there is a field called " HSDAT" -date of manufacture.you can maintain this field name in addnl data.
Maintain this Characteristic in classification (CL02)
Then this will get updated in the batch and same can be viewed in MSC3N
Regards
Hari
Edited by: Harikris_83 on Sep 29, 2011 3:05 PM

MANUFACTURING DATE IN QUALITY CERTIFICATE

Hello, we are just with sap implemented but i don't know many things yet. The issue is that the quality certificates shows the final date of production as manufacturing date but, what i need is that the certificate shows the initial date of production as the manufaturing date. After, from the manufacturing date i want sap calculate the best before date and to show it in the certificate.
Could some one help me?
thanks.
Jrdz

Typically this is controlled by your production people. When the receipt the material they have the ability to enter/change the production date. The production date is visible in the batch record, (msc3n), and can be changed updated via msc2n.
In the cert you shouldn't have to worry about figuring out the production date, it should print what has been maintained. If what is maintained is incorrect then the process should be reviewed to make sure it is correct.
FF

Copy manufacturing date to batch characteristics in REM confirmation

Hi to everyone,
I have a situation that when goods receipt occurs with movement 131 in MFBF, manufacturing date is not updated in batch. How can I copy the value as batch characteristics?
please advice,
best regards..

Hi,
If you want the value as batch characteristic you need to:
1. Create the characteristic in trn. CT04, with reference to field MCHA-ERSDA (or MCH1-ERSDA if your batch management is cross-plant)
2. Create a class in trn. CL02 and include the characteristic in it.
3. Assign the class to your material in Material Master.
Hope it helps.
Regards,
mr.

Last data update

Hi,
How I can find the last data update information(date and time) of multiprovider in BW?
Kindly help on this.
Regards
Mukul Singhal

Let me explain how the "last data update" works.
If the query is based on one cube or DSO, it is the time of the last request upload.
If the query is based on a multiprovider, like the example given ealier,
assume there are three cubes in multiprovider :
Last update of cube1 is 11/17/2008
Last update of cube2 is 11/19/2008
Last udpate of cube3 is 11/20/2008.
The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
Now we assume there are three cubes like this in multiprovider :
Last update of cube1 is 11/17/2008
Last update of cube2 is 11/19/2008
Cube3 is empty. It has never been loaded with any request.
Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
Regards,
Patricia

Unable to run bapis for project status update and date update together

Hi Experts,
I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS   i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
I have tried putting a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
Loop at itab.
if date_changed = 'X'.
      CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
      READ TABLE it_error WITH KEY message_type = c_e.
      IF sy-subrc <> 0.
Commit
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
   endif.
endif.
if Status_change = 'X'.
      CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
      CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
      READ TABLE t_result WITH KEY message_type = c_e.
      IF sy-subrc NE 0.
        CALL FUNCTION 'BAPI_PS_PRECOMMIT'
             TABLES
                  et_return = t_ret.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
     ENDIF.
endif.
    WAIT UP TO 4 SECONDS.
endloop.

Try to use
SET UPDATE TASK LOCAL.
before each BAPI call.
Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

How to find out the "manufacture date"?

Hello!
Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
I need this information for my insurance!
I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
But there is no "S" on the first digit!??
So it is maybe "Y6" which can be November 2006! Is this right?
Thank you!
===========
This is the information on the link above:
How to encode a Toshiba Hard Disk Drive Serial Number?
The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
Example:
M Y x x x x x x x
M = Month
Y = Year
The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
Examples:
2 8 1 7 0 0 0 1 A
2 = February
8 = 1998
3 0 5 4 4 3 0 6 T
3 = March
0 = 2000
X 9 D 7 8 3 3 1 T
X = October
9 = 1999
The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.

Hello
Try with http://gedb.toshiba.com/
Let me know if you find info you need.

Outbound Delivery without Manufacturing date

Hi Guys,
I have activated SLED in Article master.(We are using SAP IS Retail, ECC 6.00)
At the time of GRN, users have entered manufacturing date to check
remaining shelf life for an article.
I have made following customization (using transaction code OMJE)
(a) 3 No Check at Goods Issue for movement type 601,602, 647 and 648
In spite of above IMG settings (No Check at at Goods Issue), system
shows an error message that, Enter the date of production (Message No.
12018) in transaction code VL02N.
Pls note that, we don't want system to check SLED at the time of PGI.
Any feedback....most welcome.
Regards,
Muralidhara

Hi MURALIDHARA,
Please Check your incompletness procedure.
I guess u r sending the goods to the store. During stock transfer movement type 641, 603 are used. You will also have to set this indicator.
Let me know if u r still stuck. I have the solution as i have already configured this process.
Regards
Tapan

Cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

I wish I fully understood your post, but perhaps you should try re-downloading. Are you trying to download the 10.7.3 update? If so, then try downloading OS X Lion Update 10.7.3 (Client Combo).

How to hide the Last date Update in the Excution of a report

Dear All,
When we execute a query in EP, the Out Result will contain the following Options
1) Save As
2) Open
3) Export Excel
4) Information
5 ) Comments
6) Filters
7) Settings
8) Last data update
Can anyone plese tell me how to give the authorisation in BI for the above options.so that we can give restrictions for some users.
hope everything is crear.
Please give me the hint atleast

You also have to test the value:
REPORT ztest MESSAGE-ID 00.
DATA: BEGIN OF itab OCCURS 0,
        f1 TYPE i,
        f2 TYPE i,
        f3 TYPE i,
        f4 TYPE i,
      END OF itab.
DATA: sel_field(20),
      value TYPE i.
DO 5 TIMES.
itab-f1 = sy-index.
itab-f2 = sy-index + 10.
itab-f3 = sy-index + 20.
itab-f4 = sy-index + 30.
APPEND itab.
ENDDO.
LOOP AT itab.
WRITE: /001 itab-f1, itab-f2, itab-f3, itab-f4.
HIDE itab.
CLEAR itab.
ENDLOOP.
AT LINE-SELECTION.
CLEAR: sel_field,
         value.
GET CURSOR FIELD sel_field.
IF sy-subrc = 0.
    CASE sel_field.
      WHEN 'ITAB-F1'.
        value = itab-f1.
      WHEN 'ITAB-F2'.
        value = itab-f2.
      WHEN 'ITAB-F3'.
        value = itab-f3.
      WHEN 'ITAB-F4'.
        value = itab-f4.
    ENDCASE.
    MESSAGE s001 WITH 'Value of' sel_field 'is' value.
ELSE.
    MESSAGE s001 WITH 'Invalid field selected'.
ENDIF.
Rob

Automatic date update in Pages for iPad

I want the date (date feild?) in a Pages for iPad letter template to update automatically (using the system date, like other word process application) but cannot see how to do this. This automatic date update appears to work in the Pages for iPad templates examples. i.e open a letter template and the date field shows the correct date, do the same with the same template 24 hours later and the date is shown correctly accordingly. I believe feature is achieved in the Mac version of Pages by setting up a date field. I would like to do the same with Pages iPad. Any ideas how this can be achieved?

We cannot speculate about future Apple products. We know no more about this than you do at this time.
You can suggest it to Apple at Apple Feedback.

Manufacturing date updation

Similar Messages

Maybe you are looking for