Map including spliting operation dosen't work in MDM Import Server

Hi All,
I met a problem with MDM Import Server when using a map file with spliting operation in it, although I can use it in MDM import manager to load data successfully. The error in log file is like this:
Record Matching...
Importing Lookup...
One or more attribute values are invalid.
One or more attribute values are invalid.
One or more attribute values are invalid.
One or more attribute values are invalid.
Import Failed!
The spliting in my map is: I split field "Category" into category1 and category2 with space " ". e.g. value "Trousers M" is splitted into "Trousers" and "M" . Then I map category1 to category and category2 to size.
I tried to delete this spliting and just map "Category" to "Category" then it works well for Import Server.
Is it the bug of MDM import server? can anyone give me a explaination?
Thanks! Bin

Under Configuration Options of the Import Manager,
check the values for
<b>Default Batch Handling</b>
AutoMap Unmapped Values = Yes
Unmapped value Handling = Add/Ignore/Fail.
Set the values according to your needs.
Make sure that the data source is updatable as well.

Similar Messages

Import Server not working

Hi ,
I have a scenario where PI is sending data to MDM inbound port which is automaticaly getting imported to MDM .
Now problem is PI is succesfully sending data but file is not coming to Inbond port.
PI side all the configuration is fine .
Through Import amanger its working fine.
Kindly help me out .
Thanks in advance.
Regards,
Neethu Joy

Hi Neethu,
it seems problem at PI level because as you said file not coming in MDM inbound port.
To check MDM import server working or not just put file in MDM inbound port manually and check wether file processing automatically or not.
if PI sending file to to inbound port then you need to check port in MDM console and configuration parameter such as remote system, map , file format, processing time, file aggregation count etc.
Kindly check and revert back.
Thanks,
Jignesh Patel

Map dosen't work properly and when you are type some events in CALENDER suddenly it will disappear (after 10 sec)

Map dosen't work properly and CALENDER has problem , after type events to some dates , suddenly disappear , it dosen't save.

Anyone know how to delete this posting? Lack of response indicates I either asked the question in a stupid way or didn't ask worthwhile question to start with. I'm guessing it was a bit of both.

UBLR dosen´t work in an interfaces trunk?

I´m configuring Aggregate policer in a Sup720-3B, I need to configure Aggregate Policer in a Trunk interfaces, It´s required to limit the bandwidth for vlan to L2 through an interface trunk, between two catalyst. But it´s dosen´t work. The configuration that I am using is:
S6509#run int giga 3/2
Building configuration...
Current configuration : 167 bytes
interface GigabitEthernet3/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
service-policy input LIMIT
end
S6509#
S6509#show ip access-lists TRAFFIC
Extended IP access list TRAFFIC
10 permit ip any any
S6509#
S6509#show class-map Daniel
Class Map match-all Daniel (id 1)
Match access-group name TRAFFIC
S6509#
S6509#
S6509#show policy
S6509#show policy-map
Policy Map LIMIT
Class Daniel
police flow mask src-only 2000000 200000 conform-action transmit exceed-action drop
S6509#
S6509#
hostname S6509
boot system flash disk1:s72033-advipservicesk9_wan-mz.122-18.SXF14.bin
logging buffered 32768 debugging
logging rate-limit all 1000
enable secret 5 $1$Oewp$4FbojEBx0Nn.sXO1ZzhIj/
class-map match-all Daniel
match access-group name TRAFFIC
policy-map LIMIT
class Daniel
police flow mask src-only 2000000 200000 conform-action transmit exceed-action drop
S6509#show mls qos
QoS is enabled globally
Policy marking depends on port_trust
QoS ip packet dscp rewrite enabled globally
Input mode for GRE Tunnel is Pipe mode
Input mode for MPLS is Pipe mode
QoS Trust state is DSCP on the following interface
Gi3/4
Vlan or Portchannel(Multi-Earl) policies supported: Yes
Egress policies supported: Yes
----- Module [5] -----
QoS global counters:
Total packets: 233
IP shortcut packets: 0
Packets dropped by policing: 0
IP packets with TOS changed by policing: 0
IP packets with COS changed by policing: 0
Non-IP packets with COS changed by policing: 0
MPLS packets with EXP changed by policing: 0
S6509#
S6509#
S6509#show policy-map interface gigabitEthernet 3/2
GigabitEthernet3/2
Service-policy input: LIMIT
Class-map: Daniel (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name TRAFFIC
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
S6509#

Contact the wireless carrier to which the iPhone is locked and
ask that carrier if they provide unlocking and if you qualify.
What is the exact wording of any error message you receive?

SQL Dev 4.0 - Allow shortcut key to be mapped to several operations (if in different categories).

The default SQL Developer 4.0 short cut keys have a few keys that are mapped to multiple operations but the operations are in different categories.
It is not possible to do this yourself via the UI. For example I want to map F9 to both Run Statement (in the Worksheet category) and Compile (in the PLSQL Editor category). Assigning F9 to one removes it from the other and the help text suggests this.
However, I hacked the settings file directly (thus bypassing this logic) and everything works fine. I think it should allow keys to be mapped to different operations as long as they are in different categories.
Thanks, Mike

thanks again for the follow-up. apparently it was just a bug of some sort. i checked and none of my plug-ins shuld have had any affect, and when i went home last night, i tried it out on the macbook and it behaved as expected. apparently a restart on my macbook pro and everything is back to normal. i've since turned the new keyboard shortcuts off and removed the extra one from my mouse buttons.
btw, i was watching trying to find what might be different between the two computers and while nothing there stood out... i did notice the the safari keyboard command was context-sensitive.
when i had multiple tabs open in a window, the command-w in the menu was on close tab, then when i ended on the last tab—now simply the window—it switched up to close window. all is well. thanks for the follow-up.
- jeremy

Witihin same operation we have 10 machines , user wants to indivual mapping along with operation

hi,
within same operation we have 10 machines , user wants to individual mapping along with operation, when we are creating the production order it is showing under the 10 operation number we have 10 workcenter and system will provide to confirm the confirmation where the actual production is happened ,
please help me , it there any way to map the process in SAP.

Hello Abhishekd
You question is not exactly clear, as you have already described the entire process on SAP.
I would create a separated work center for each machine and for each work center an operation on the routing.
During the order confirmation, you can choose if you want to confirm the operation individually or post a header confirmation on CO15.
For more details about how to create the work center, routing and order, check the following documents:
http://scn.sap.com/docs/DOC-52403
CRP Basic Settings Part 2 – Routing
CRP Basic Settings Part 3 – Production Order
BR
Caetano

Windows 8 HP TouchSmart IQ510la Wrong Monitor Detection and TouchScreen Dosen't Work

Greetings;
Well i've finally managed (trought a complicated and unnecessarily complicated process) to install Windows 8 Pro, and it worked (Not completly im trying to solve so many issues, somebody made a serious mistake when it said Win8 will work well with my TouchSmart) but now one of the many problems i have is that my touch screen dosen't work. Also when i go to Device Manager on Windows 8 the monitor is listed as PnP Generic and that shouldn't be, i have alredy checked on the forums and tryied every solution for these problems, my graphic card drivers are updated, but i haven't been able to download any drivers from HP driver page for my model for Windows 8, so i wished to ask a few questions:
¿Is HP or Windows working on this issues?
¿Is there a solution for this issues? and if yes ¿Where? if no then the question before applies.
¿Is there a work around this? and if yes ¿Where? if no then the first question applies.
Also i think i should provide this
Model: IQ510la
Serial#: {Removed for privacy}
Product#: FK963AA - ABM
Thanks in advance

Here are the specs for your HP TouchSmart IQ510la Desktop Computer. According to the specs, your computer was introduced for sale on or around 31-Jul-2008. Please see the HP document entitled "HP Windows 8 Upgrade - Important Upgrade Information";
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
Also see "HP Windows 8 Upgrade - Important Information Before Upgrading"
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Delete operation is not working to delete selected row from ADF table

Hi All,
We are working on jdev 11.1.1.5.3. We have one ADF table as shown below. My requirement is to delete a selected row from table, but it is deleting the first row only.
<af:table value="#{bindings.EventCalendarVO.collectionModel}" var="row"
rows="#{bindings.EventCalendarVO.rangeSize}"
emptyText="#{bindings.EventCalendarVO.viewable ? applcoreBundle.TABLE_EMPTY_TEXT_NO_ROWS_YET : applcoreBundle.TABLE_EMPTY_TEXT_ACCESS_DENIED}"
fetchSize="#{bindings.EventCalendarVO.rangeSize}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.EventCalendarVO.collectionModel.selectedRow}"
selectionListener="#{bindings.EventCalendarVO.collectionModel.makeCurrent}"
rowSelection="single" id="t2" partialTriggers="::ctb1 ::ctb3"
>
To perform delete operation i have one delete button.
<af:commandToolbarButton
text="Delete"
disabled="#{!bindings.Delete.enabled}"
id="ctb3" accessKey="d"
actionListener="#{AddNewEventBean. *deleteCurrentRow* }"/>
As normal delete operation is not working i am using programatic approach from bean method. This approach works with jdev 11.1.1.5.0 but fails on ver 11.1.1.5.3
public void deleteCurrentRow (ActionEvent actionEvent) *{* DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcItteratorBindings =
bindings.findIteratorBinding("EventCalendarVOIterator");
// Get an object representing the table and what may be selected within it
ViewObject eventCalVO = dcItteratorBindings.getViewObject();
// Remove selected row
eventCalVO.removeCurrentRow();
it is removing first row from table still. Main problem is not giving the selected row as current row. Any one point out where is the mistake?
We have tried the below code as well in deleteCurrentRow() method
RowKeySet rowKeySet = (RowKeySet)this.getT1().getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.getT1().ggetValue();
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();
rowData.getRow().remove();
The same behavior still.
Thanks in advance.
Rechin
Edited by: 900997 on Mar 7, 2012 3:56 AM
Edited by: 900997 on Mar 7, 2012 4:01 AM
Edited by: 900997 on Mar 7, 2012 4:03 AM

JDev 11.1.1.5.3 sounds like you are using oracle apps as this not a normal jdev version.
as it works in 11.1.1.5.0 you probably hit a bug which you should file with support.oracle.com...
Somehow you get the first row instead of the current row (i guess). You should debug your code and make sure you get the current selected row in your bean code and not the first row.
This might be a problem with the bean scope too. Do you have the button (or table) inside a region? Wich scope does the bean have?
Anyway you can try to remove the iterator row you get
public void deleteCurrentRow (ActionEvent actionEvent) { DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcItteratorBindings =
bindings.findIteratorBinding("EventCalendarVOIterator");
dcItteratorBindings.removeCurrentRow();Timo

Gif imagen dosen't work at o.s 6.0

The gif imagen in profile bbmsn contactas dosen't work in my torch 9800 os 6.0 all my friends that have got the os 6.0 have goy the same proble, i wanna know if there are or when is coming a update to solution this problem

Hi,
the problem whit NI 9223 module and the example that you talk about is know. Indeed, there is a CAR - Corrective Action Request - #30724 that deals with the erroneous implementation of the example.
To improve the code, the owner of CAR, suggest:
Added pipelining loops and removed from FPGA VI to Increase maximum acquisition rate and modified host VI to implement proper DMA FIFO programming practices.
I try to implement and improve the code. Bye
Mario

PM Order - Change "Work Center" on operations to "Main Work Center"

Hi Experts,
We have prepared a tool for client, which create Maintenance Plan and order in the background.
The order created is having "Main Work Center" defined at header and "Work Center" at the operations level. In the current scenario the "Main Work Center" and "Work Center" are different say 'ABC' & u2018XYZu2019.
Client has the requirement that work center maintained at operations should be same as the main work center.
We need to implement the solution to take care of work center to be same as main work center while creation of the order in the background.
Has anyone worked on the similar requirement before?
I checked for existing USER EXITS for IW31/32/33 and found only one IWO10012. This doesnu2019t seem to be much useful.
Please suggest any possible solution.
Thanks,
Ankur Sharma

Hi Tilak,
Thanks for the response. The current situation is that we are creating the order in background using the Z-program. The scenario is creating order with operation entries having work center not equal to the main work center.
I am not functional, so just talking in terms of technical terms.
Is there a way the work center at operation level can be changed to main work center in background?
Thanks,
Ankur Sharma

HT2693 How come my apple map doesn't show the map on apple standard map.. However, it does work on google map. I was trying to close the apple maps, restart, and many other ways but still didn't work. Please help me.

A standard map on my iPhone 4s is suddenly not working. It shows the blue dot but it doesn't show the actual Map where I can see the streets.
I don't know how to fix this problem. I did try so many ways even restarted iPhone but still not working... Please help me out.

Hi JinHDK,
Yes I worked previously but it's now not working. I did double click home botton and terminate the maps many time but still not working.
The standard maps just not show any route only the blue dot (my location.) I really don't know what to do. Btw, I used to live in SF but now I'm traveling to Thailand. One of my friend is using iPhone 4S as well but his maps is working. So I guess it is about its application on my phone...
Thank you.

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

Mapping paths to servlets doesn't work anymore in SP5 ??

Hello,
          see subject.
          I have a small web application which is contained in a WAR-file named
          "httpdump.war". Its deployment descriptor (web.xml) maps the servlet
          httpdump.HttpDumpServlet to the path /servletpath/* with the following
          XML statements:
          <servlet>
          <servlet-name>HttpDumpServlet</servlet-name>
          <display-name>The HTTP Dump Servlet</display-name>
          <servlet-class>httpdump.HttpDumpServlet</servlet-class>
          </servlet>
          <servlet-mapping>
          <servlet-name>HttpDumpServlet</servlet-name>
          <url-pattern>/servletpath/*</url-pattern>
          </servlet-mapping>
          In weblogic.properties, I have:
          weblogic.httpd.webApp.httpdump=httpdump.war
          The WAR-file is structured as follows:
          $ jar tf httpdump.war
          META-INF/
          META-INF/MANIFEST.MF
          WEB-INF/classes/httpdump/HttpDumpServlet.class
          WEB-INF/web.xml
          dummy.jsp
          $
          Now a request like http://host:port/httpdump/servletpath/xyz should be
          directed to my servlet, right?
          This works flawlessly in WLS 5.1 SP 3. With SP 5, I get the following:
          Sat Aug 26 15:58:54 CEST 2000:<E> <WebAppServletContext-httpdump> Error loading servlet: httpdump.HttpDumpServlet
          java.lang.ClassNotFoundException: httpdump.HttpDumpServlet
               at weblogic.boot.ServerClassLoader.findLocalClass(ServerClassLoader.java:355)
               at weblogic.boot.ServerClassLoader.loadClass(ServerClassLoader.java:111)
               at java.lang.ClassLoader.loadClass(ClassLoader.java:243)
               at weblogic.utils.classloaders.GenericClassLoader.parentLoadClass(GenericClassLoader.java:503)
               at weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(GenericClassLoader.java:366)
               at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:182)
               at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:156)
               at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:371)
               at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:187)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
               at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:760)
               at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:707)
               at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:251)
               at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:369)
               at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:269)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)
          Sat Aug 26 15:58:54 CEST 2000:<E> <WebAppServletContext-httpdump> Servlet failed with ServletException
          javax.servlet.ServletException: Servlet class: httpdump.HttpDumpServlet could not be loaded - the requested class wasn't found in the classpath
               at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:379)
               at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:187)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
               at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:760)
               at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:707)
               at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:251)
               at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:369)
               at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:269)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)
          So, it seems the WLS has interpreted the <servlet-mapping> tag in the
          DD correctly, but is then looking for the servlet class in the wrong
          places..?
          My system configuration:
          $ java weblogic.Admin t3://localhost:7001 VERSION
          WebLogic Build: 5.1.0 Service Pack 5 08/17/2000 07:21:55 #79895
          $ uname -a
          Linux localhost.localdomain 2.2.14 #1 Wed Aug 16 01:57:42 CEST 2000 i686 unknown
          $ java -version
          java version "1.2.2"
          Classic VM (build 1.2.2-L, green threads, nojit)
          $
          Any hints?
          Thanks,
          Olaf
          Olaf Klischat | TU Berlin computer science
          Oberfeldstrasse 132 |
          12683 Berlin, Germany |
          phone: +49 30 54986231 | eMail: [email protected]


Hi,
          we jared our servlets up and placed them in /WEB-INF/lib/....jar. The
          mapping is working without any problems.
          Daniel Hoppe
          -----Original Message-----
          From: Kumar Allamraju [mailto:[email protected]]
          Posted At: Saturday, August 26, 2000 7:57 PM
          Posted To: servlet
          Conversation: mapping paths to servlets doesn't work anymore in SP5 ??
          Subject: Re: mapping paths to servlets doesn't work anymore in SP5 ??
          Yes, this is already a known problem in SP5.
          Fix will be available in the upcoming service packs.
          I guess the workaround is to put servlet classes in servlet classpath.
          Sorry about the regression.
          Kumar
          Olaf Klischat wrote:
          > Hello,
          >
          > see subject.
          >
          > I have a small web application which is contained in a WAR-file named
          > "httpdump.war". Its deployment descriptor (web.xml) maps the servlet
          > httpdump.HttpDumpServlet to the path /servletpath/* with the following
          > XML statements:
          >
          > <servlet>
          > <servlet-name>HttpDumpServlet</servlet-name>
          > <display-name>The HTTP Dump Servlet</display-name>
          > <servlet-class>httpdump.HttpDumpServlet</servlet-class>
          > </servlet>
          >
          > <servlet-mapping>
          > <servlet-name>HttpDumpServlet</servlet-name>
          > <url-pattern>/servletpath/*</url-pattern>
          > </servlet-mapping>
          >
          > In weblogic.properties, I have:
          >
          > weblogic.httpd.webApp.httpdump=httpdump.war
          >
          > The WAR-file is structured as follows:
          >
          > $ jar tf httpdump.war
          > META-INF/
          > META-INF/MANIFEST.MF
          > WEB-INF/classes/httpdump/HttpDumpServlet.class
          > WEB-INF/web.xml
          > dummy.jsp
          > $
          >
          > Now a request like http://host:port/httpdump/servletpath/xyz should be
          > directed to my servlet, right?
          >
          > This works flawlessly in WLS 5.1 SP 3. With SP 5, I get the following:
          >
          > Sat Aug 26 15:58:54 CEST 2000:<E> <WebAppServletContext-httpdump>
          Error loading servlet: httpdump.HttpDumpServlet
          > java.lang.ClassNotFoundException: httpdump.HttpDumpServlet
          > at
          weblogic.boot.ServerClassLoader.findLocalClass(ServerClassLoader.java:35
          5)
          > at
          weblogic.boot.ServerClassLoader.loadClass(ServerClassLoader.java:111)
          > at java.lang.ClassLoader.loadClass(ClassLoader.java:243)
          > at
          weblogic.utils.classloaders.GenericClassLoader.parentLoadClass(GenericCl
          assLoader.java:503)
          > at
          weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(GenericCl
          assLoader.java:366)
          > at
          weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoa
          der.java:182)
          > at
          weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoa
          der.java:156)
          > at
          weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl
          .java:371)
          > at
          weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.jav
          a:187)
          > at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
          java:118)
          > at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContex
          tImpl.java:760)
          > at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContex
          tImpl.java:707)
          > at
          weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletCon
          textManager.java:251)
          > at
          weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:3
          69)
          > at
          weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:269)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)
          >
          > Sat Aug 26 15:58:54 CEST 2000:<E> <WebAppServletContext-httpdump>
          Servlet failed with ServletException
          > javax.servlet.ServletException: Servlet class:
          httpdump.HttpDumpServlet could not be loaded - the requested class
          wasn't found in the classpath
          >
          > at
          weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl
          .java:379)
          > at
          weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.jav
          a:187)
          > at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
          java:118)
          > at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContex
          tImpl.java:760)
          > at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContex
          tImpl.java:707)
          > at
          weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletCon
          textManager.java:251)
          > at
          weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:3
          69)
          > at
          weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:269)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)
          >
          > So, it seems the WLS has interpreted the <servlet-mapping> tag in the
          > DD correctly, but is then looking for the servlet class in the wrong
          > places..?
          >
          > My system configuration:
          >
          > $ java weblogic.Admin t3://localhost:7001 VERSION
          > WebLogic Build: 5.1.0 Service Pack 5 08/17/2000 07:21:55 #79895
          >
          > $ uname -a
          > Linux localhost.localdomain 2.2.14 #1 Wed Aug 16 01:57:42 CEST 2000
          i686 unknown
          >
          > $ java -version
          > java version "1.2.2"
          > Classic VM (build 1.2.2-L, green threads, nojit)
          > $
          >
          > Any hints?
          >
          > Thanks,
          > Olaf
          > --
          > Olaf Klischat | TU Berlin computer science
          > Oberfeldstrasse 132 |
          > 12683 Berlin, Germany |
          > phone: +49 30 54986231 | eMail: [email protected]

LIKE operator is not working in SQL Query in XML file

Hi Gurus,
LIKE operator is not working in SQL query in XML template.
I am creating a PDF report in ADF using Jdeveloper10g. The XML template is as follows
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<dataTemplate name="catalogDataTemplate" description="Magazine
Catalog" defaultPackage="" Version="1.0">
<parameters>
<parameter name="id" dataType="number" />
<parameter name="ename" dataType="character" />
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[
SELECT ename, empno, job, mgr from EMP where deptno=:id and ename LIKE :ename || '%']]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="EmployeeInfo" source="Q1">
<element name="EmployeeName" value="ename" />
<element name="EMPNO" value="empno" />
<element name="JOB" value="job"/>
<element name="MANAGER" value="mgr" />
</group>
</dataStructure>
</dataTemplate>
if i pass the parameter value of :ename from UI, it doesn't filter. But if I give ename = :ename it retrieves the data. Can anyone help me why LIKE operator doesn't work here?
Appreciate your help,
Shyamal
email: [email protected]

Hi
Well for a start, you are doing some very strange conversions there. For example...
and to_char(a.msd, 'MM/DD/YYYY') != '11/11/2030'
and to_char(a.msd, 'MM/DD/YYYY') != '10/10/2030'If a.msd is a date then you should e converting on the other side ie.
and a.msd != TO_DATE('11/11/2030', 'MM/DD/YYYY')
and a.msd != TO_DATE('10/10/2030', 'MM/DD/YYYY')Also, you may want to take into consideration nothing being input in :P2_ITEM_NUMBER like this...
AND INSTR(a.item_number,NVL(:P2_ITEM_NUMBER,a.item_number)) > 0Is item number actually a number or char field? If it's a number, you want to explicitly convert it to a string for using INSTR like this...
AND INSTR(TO_CHAR(a.item_number),NVL(TO_CHAR(:P2_ITEM_NUMBER),TO_CHAR(a.item_number))) > 0?
Cheers
Ben

LoadingSecondFile - Dosen't work

loadMovie() loads SWFs into _root.mc1.mc2, and I use the below method to be able to identify the selected movieclip. It works when I load the first SWF but when the second SWF is been loaded it dosen't work. What may be the cause for this.
I tried unloadMovie() and removeMovieClip() to clear the movieclip before loading the new file, but no success.
function traceName():Void {
     trace(this._name);
for (i=0; i<5; i++) {
    _root.mc1.mc2["color"+i].onRelease = traceName;

Thanks Ned. But I've got an array named mc
var mc:Array = [mc1, mc2, mc3];
I'm loading the below code as an external swf as well. Could that be causing this issue?
function traceName():Void {
     trace(this._name);
for (i=0; i<5; i++) {
    _root.mc1.mc2["color"+i].onRelease = traceName;

Map including spliting operation dosen't work in MDM Import Server

Similar Messages

Maybe you are looking for