MapListener and Coherence and Java versions

Hi,
(1) On one of our testing environments, on linux, we are running coherence 3.7.1.7 on JVM Java 1.6u33 . We are using coherence*extend clients, and we do listen to updates in a cache through MapListeners. We have no issues on this configuration, and we consistently get onMapEvent calls for events.
(2) When the same code is ported to another linux box, running 3.7.1.7 on JVM 1.6u06, we start to get onMapEvent calls for a while, but then it stops abruptly. We are able to verify the server cache getting updated properly, through a backing map listener on the server side. However the listeners on the coherence*extend are not sent notification.
I understand that the (2) configuration is running JVM which is lower than the recommended version,but, When we downgraded JVM on (1) with 1.6u06, we still had consistent onMapEvent calls.
My question is, does this kind of inconsistent behavior ring a bell to anybody over here ? It is hard to understand why the notifications would be inconsistent when the JVM is lower ... may be it is not associated with the JVM at all ? Can somebody throw some light on this please ?

If it won't compile with VJ++, don't expect it to run with IE unless you've got a Sun plugin.
As to writing parsers, what kind of grammar are you trying to parse?

Similar Messages

  • Check and Respond to Java Version

    I know this question has been asked a million times before, but is there a way that I can check the version of the JVM that my end user is running and then also print an error message if the user doesn't have an up-to-date enough version of the JVM? I know I can call System.getProperty("java.version") but that returns a String that I would have to parse. Is it possible to get the version any other way? Thanks.

    java.exe -version 2>&1 | findstr "java.version.*1[.]5[.]" > nul
    if errorlevel 1 (
    echo Version Required is 1.5 and the Java on Path is
    %JAVA% -version 2>&1 | findstr java.version
    exit /B 1
    save this code in a batch file and run that batch file

  • HT1338 download Java version 10.6.8 and above

    Hello
    I have a MAC Pro (OZ X 10.6.8). My netbank "log in" service requires the newest version of Java.
    Have tryed to download Java 6 again - Have also tryed to download the "7 version", but my Mac dosent accept that (think it was Lion version?).
    My netbank is; SR bank, Norway. There is a link on their homepage - but, that dosent help me anything.
    I have also checked under
    JAVA SE 6 IS THERE, both 64 bit and 32 bit. It is also hooked of (activiate...). THe version I got is: 1.6.0_37-bo6-434 (both).If I am not wrong that is the version my bank requires.
    What am bit unsure/conserneded about is if i have the Java version installed (even if I found "Java choice" under programs.
    Can you please help me. This has never been a problem before...(it started when Java had a lot of problem)
    Kind regards Annie
    ([email protected])

    To see if Java is installed (that is, if you haven't disabled it in Java Preferences.app) enter into Terminal in Utilities and hit return.
    java -version
    If you use Safari, Apple has disabled Java 6 from there. Probably also Firefox and Chrome.

  • Java versions for OIM install

    Hi,
    Last time when I installed OIM, everything worked fine, but I was unable to open the workflow manager applet. I think maybe I used the wrong JRE/JDK. Please read below the environment I am using and suggest which Jave version should be used.
    OS: Windows 2003 Server
    Browser: IE
    OIM: 9.1
    Application Server: Weblogic (latest version)
    1. Installing Oracle Weblogic, which JRE to use?
    a> 1.6 Sun Java already shipped with Weblogic
    b> 1.6 Oracle JRockit shipped with Weblogic
    c> any other Java version
    2. Installing OIM Server, in the screen where it asks for Application server information, in the field where it asks the JDK used for application server install, which one to use?
    a> The one I choose above in 1
    b> any other Java version (1.4.2_12 or _15 or something else)
    3. Installing OIM client, when it asks for JRE to use with design console, which Java to use?
    a> Install JRE bundled with OIM
    b> JDK 1.4.2_12 or _15 or any other Java version
    4. Now, when I use the OIM, what should be the Java version that my browser should be configured to launch the Workflow Manager applet?
    Thanks in advance.
    -Harmeet

    The release notes for your oim version contains information about what JRE versions are supported.
    http://www.oracle.com/technology/software/products/ias/files/idm_certification_101401.html#BABGBGHI
    Sun JDK 1.6.0_10 or higher JRockit 1.6.0_05 or higher seems to be what you are looking for.
    Best regards
    /Martin

  • How to determine the Java version in Windows XP

    In Windows 2000, I can determine the version of Java that's running by typing 'java -version' in a command prompt. However, when I type this in a command prompt in Windows XP, a message says 'java is not recognized as an internal or external command ...'.
    Is there some other means of determining the version of Java that's running on Windows XP?
    Thank you.

    I found the directory with java.exe on my XP client. After updating my Path and then typing 'java -versions' I still see a 'java not found message'. No problem though - a README.TXT says that I have JRE 1.1.7B.
    One final question - a co-worker who also has XP just starting seeing a pop-up window saying 'Runtime' error when running a Java applet. His java.exe is in a path that includes the sub-directory 'JRE' On my XP client, java.exe is in a path which includes a 'JRE11' sub-directory. We therefore seem to have different versions of the JRE. Since I don't see the Runtime error when running the same applet, should my co-worker try upgrading his JRE?
    Thank you.

  • Jrockit 3.0.0-1.5.0 on Solaris 9 - coredump when executing java -version

    Hi,
    I installed jrrt-3.0.0-1.5.0 on a Solaris 9 virtual machine. When I set JAVA_HOME and PATH to point to the jrockit install and then execute java -version, I get a Segmentation Fault. Any idea why this would be happening? I don't see a core dump file being output so I'm not sure how to troubleshoot.
    Thanks in advance for your help. We are trying to install JRockit to overcome some PermGen memory issues we are seeing while running WL 9.2.3 with Sun's Java 1.5.

    Hello,
    First, make sure you have followed the installation instructions with regards to OS patches etc to the letter:
    http://e-docs.bea.com/platform/suppconfigs/configs/solaris/solaris9_92.html
    If you still get the segfault and get a text dump (jrockit.<pid>.dump) can you post it here in its entirety? If not, I suggest that you contact Oracle Support to get help. It is possible that you have OS configuration issues or are running in an unsupported configuration (the virtualizaton setup).
    Regards,
    Henrik

  • Changing java version

    Hi all,
    We are using IBM AIX 5.2 power series 64-bit servers, y by defaulut java version which is 32-bit version is installed on servers.
    And we installed OC4J ( oracle 10g R1) on that servers, and when ever emctl is running javacore files are generation .
    Finally we observed and changed the java version to 64 bit, and we restarted the servers. Now alos javacore files are generating excessively and in the newly created javacore files shows old java version only
    I changed at env variables levels and when we type java -version it showing new version only
    Can any one please suggest how to chage the java version at OC4J level
    Now my application is working fine but it is generating java core files excessively
    And some times we are getting java.outof memroy exception
    regards
    Rajesh

    Rohiini wrote:
    My default java version is 1.4 . I want to change to jdk 5 for a particular command prompt session alone. i used the following commands
    java - versionjava version "1.4.2_07"No, that will say
    Unrecognized option: -try
    java -version
    set path = C:\java\jdk150_06\bin;%path%That will not set anything, try
    set path=C:\java\jdk150_06\bin;%path%or just
    path=C:\java\jdk150_06\bin;%path%

  • HT1338 I wonder if somebody can help me. I am not able to use my internet bank anymore, since Java launched their latest update (7.51). Appearently this one is not compatible with my hardware. I am using Mac OSX version 10.6.8, and Java version 17.0. Than

    I wonder if somebody can help me. I am not able to use my internet bank anymore, since Java launched their latest update (7.51) a few days ago. Appearently this one is not compatible with my hardware. I am using Mac OSX version 10.6.8, and Java version 17.0, which seems to be the newest one for my op sys. Anybody know how I can solve this? In advance thank you!

    Apple support article to enable Java 6.
    Java 6 Enable

  • Java version 1.4.2_06 to 1.5.0_08 and 1.5.0_10     vs.   1.6.0_02

    Hello. I did a system check on my computer for an onlline course I'm taking and it stated that I am running java version 1.6.0_02 annd thhat I need to upgrade to 1.4.2_06 to 1.5.0_08 and/or 1.5.0_10. It seems to me thought that the numbbers are going backward - and this would bbe an error. Does 1.6.0_02 have thhe capabilities of the othher numbers? what does anyone recommend I do?
    thanks,
    szo

    They have a bug in their version check. They didn't make it future proof. A program that can execute on e.g. 1.5 should be able to execute on 1.6
    Kaj

  • Java version and amount of SAPDATA

    Hi!
    I would like to install SAP Solution Manager on Solaris Sparc 10 Zone (64 Bit) with Oracle.
    Questions:
    1) Which Java version applies for the installation? I have installed 1.4.2.12.
    2) Is that problem that the <sid>adm user exist already on the server?
    Or should I delete these, because thes will be created with SAPINST?
    I run Installation as root-user
    3) How much SAPDATA do I need for the installation. I would abolish to have more than 3 SAPDATA. So I have 3 SAPDATA, each 70 GB. Is that ok? 
    Thank you very much!
    regards
    Thom

    Hi Thom,
    1) Which Java version applies for the installation? I have installed 1.4.2.12.
    Answer: Please go through the note 716604, and also 1.4.2_12 version for JDK is fine. You can go with this.
    2) Is that problem that the <sid>adm user exist already on the server?
    Answer : It wont be the problem if it exists,but check the owner and modes as per the guide and change it.
    3. should I delete these, because thes will be created with SAPINST?
    Answer:  Yes,users will be created by SAPINST,but if its already exists, you dont need to delete this. If you dont know the changing of owners or modes for the sidadm user. you can delete, it will create by SAPINST.
    4.I run Installation as root-user
    Answer: Yes. you have to start installation with root user.
    5.3) How much SAPDATA do I need for the installation. I would abolish to have more than 3 SAPDATA. So I have 3 SAPDATA, each 70 GB. Is that ok?
    Answer: SAP recommends 4 sapdata's. The size is depends on how much data you maintain in the system. Try to create SAPDATA4 and distrube the size to all 4 sapdata's.
    Hope you understand this.
    Thanks
    Kishore

  • Java Version for ERP 2005 and Oracle 10.2.0.1

    Hi all,
    I've just a question. I'm trying to install ERP2005 on Windows 2003 Server with Oracle 10.2.0.1.
    But the process terminates at the step "Import ABAP" with the error messages concerning "CJS-30022 Program 'Migration Monitor' exits with error code 103 " and " FCO-00011 The step runMigrationMonitor with step key".
    I've had a similiar abort with another installation. Could the java version cause this error? Which java version is recommended as standard in regard to our ERP2005-installation?
    Please help me !!
    Thanks in advance.

    10.2.0.1 is not supported.
    you have directly update 10.2.0.1 after the installation to 10.2.0.2 and then install at least hotfix 10.2.0.2.12 (current is 10.2.0.2.13).
    Using older version of Oracle 10.2.0.2.12 will cause a lot of problems.
    By the way, are you installing a blank new ERP2005 or are you performing a systme copy?
    Peter

  • How to setup JAVA_HOME or JRE_HOME for veridata, and newest Java version

    when I test veridata agent connection to source db, I got following error:
    Agent remote message (101): Unhandled exception 'java.lang.UnsupportedClassVersionError': (oracle/jdbc/pool/OracleDataSource) bad major version at offset=6
    Then I checked java home on source, it is set to $ORACLE_HOME/jdk ,and java version is 1.5.
    Since my oracle goldengate agent download is 11.2, doc says it requires 1.6 as mininum java version.
    I just wonder how I get oracle Home has 1.6 java binaries.
    Thanks in advance.

    982335 wrote:
    I just wonder how I get oracle Home has 1.6 java binaries.Java doesn't have to be installed in Oracle_Home, it can be installed anywhere on your system. You probably already have a Java 6 installed somewhere; but if not, just install it (via pkg manager or manually installing from a tarball, etc). Then just set JAVA_HOME to the directory containing "bin", and prepend $JAVA_HOME/bin to your PATH (this should be quite simple).

  • SAP NetWeaver 04s SP7 Java Version And SAP NetWeaver 04s ABAP Version

    Hello,
    I would like to ask if anyone has installed both Java and ABAP version on PC/Notebook.
    What did you install first and why?
    When installing the second of the two, did you need to turn off or detete any part of first installation?
    Any advice on the installation of both versions on one PC would be appriciated.
    Thank You,
    Spiro.

    Hi.  I have installed NW04s ABAP stack and the NW04 Java stack(slim edition) on my laptop.  I installed ABAP first, then the java stack.  I did do it the other way around, but the ABAP stack would not load successfully, so remember ABAP first, then java.  No, did not turn off or delete anything from the abap installation.
    Regards,
    Rich Heilman

  • How can I downgrade my Java version and Runtime Environment to 6?

    Hi, thanks for reading this in advance:
    I have a couple problems. Ever since Java Preferences was removed in one of Lion's updates I have been having trouble with java.
    How do I downgrade my java and runtime environment to java 6?
    When I go into terminal, and type java -version, this is what I get:
    java version "1.7.0_09"
    Java(TM) SE Runtime Environment (build 1.7.0_09-b05)
    Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode)
    How do I downgrade the "java version" to 6 and how do I downgrade the SE Runtime Environment to 6?
    I accidentally installed 7 a couple days ago and I've been having trouble with some applications.
    Thank you so much.

    Dear Minionsman and everyone who reads this. I was so happy when i downgraded and i wanted to share it to all, I have found out why it says this in terminal
    java version "1.7.0_09"
    Java(TM) SE Runtime Environment (build 1.7.0_09-b05)
    Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode)
    and why it says something different on java tester
    Its because java 7 blocks every java version below it.
    How do you downgrade?
    Well all you do is delete a few files
    INSTRUCTIONS BELOW
    1.Open Terminal
    2. Enter these commands
    sudo mkdir -p /Library/Internet\ Plug-Ins/disabled
    sudo mv /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin /Library/Internet\ Plug-Ins/disabled
    sudo ln -sf /System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPlugin2_NPAPI .plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
    sudo ln -sf /System/Library/Frameworks/JavaVM.framework/Commands/javaws /usr/bin/javaws
    3.
    Go to /Library/Internet Plug-Ins/ and delete the JavaAppletPlugin.plugin bundle.
    4.
    Go to /System/Library/Java/JavaVirtualMachines/ and delete anything whose name starts with jdk1.7.0 or says Java 7 or something similar.
    5. now go to terminal and type
    java -version
    6.it should say something like this
    java version "1.6.0_35"
    Java(TM) SE Runtime Environment (build 1.6.0_35-b10-428-11M4508)
    Java HotSpot(TM) 64-Bit Server VM (build 20.10-b01-428, mixed mode)
    <Edited by Host>

  • How to unistall and install the hole Java version

    Hy,
    I tried to unnistal the supposedly old version java and install a new one.
    I coudn't install the new version because the installer tells me that " This volume contens a new version of java", but when I tried to use one program that requires java it didn't work.
    My questions are:
    1- How can I unistall the old version?
    2- How can IO install de new one?
    Thanks ,
    Luciana

    If you need to install Java legacy SE 6 runtime, first, you can try going to the website associated with the software (app) that you are trying to run and see if they have any support options.  If there is nothing available for you, you can try this link (it worked for me anyway):  users can download Java 6 here
    I was trying to run my Finale program (music notation software) for the first time after the Yosemite upgrade, and I got an error message that said I needed to install Java legacy SE 6 runtime.  After searching a few other places online with no success, I found this link on Finale's website (www.makemusic.com) and clicked on "FINALE," then "SUPPORT," then "SUPPORT SOLUTIONS" and I typed "Java legacy SE 6 runtime" into the search bar.  The #1 search topic that came up is titled, " Java 6 SE Update Required Message when launching Finale or PrintMusic."  After clicking on that, There was this link to install Java legacy SE 6 runtime: users can download Java 6 here
    If you click on that link, it will download the update.  You will then go to your downloads folder, click on the file, and then it will step you through all the usual installation prompts.  This link is trustworthy, so no worries there!  I hope this helps!

Maybe you are looking for