Mapping attributes to configurator attributes

Hi, I'm trying to find an example of how I can map pricing attributes to configurator attributes so that I can use the configurator attributes withing pricing formulas.
I can create the pricing attributes ok, it's the specific entry in the attribute mapping screen I can not figure out.
Does anyone have an example I coulkd use for reference?
Thanks

could u explain in detail waht exactly r u looking for.
Are u looking ot create a database or connecting/inserting data in to the relational database

Similar Messages

How to map single context value attribute to multiple value attributes?

Hello,
is there any way to map a single value attribute
from view's context into several value attributes
in controller's context?
The business context of what I want to achieve
is the following: I have a view which can be called
in two modes: read only (RO) and read-write (RW).
The input parameters to the view are the same for
both modes, however when in RO mode, the view calls
a different set of web services than when called
in RW mode. Before calling each of the web services
I need to populate their context value attributes
with appropriate input values.
I know I can do it in Java code, but is it possible
to do it without any programming (doing it in the
source code is prone to errors)?
Any help highly appreciated.
Greetings,
Tomek.

Hi Kishore,
than you very much for your kind help.
I have already created a value attribute of type
boolean and mapped it into the read-only property
of the UI elements. This however does not solve all
of the problems... I will describe it with an
example:
Let's say the form I want to implement will be
used to: create (read-write mode), update (read-
write mode) or show (read-only mode) customer's
data. The customer's data is complex (lots of
data, including tree structures).
The problem is that:
- when the form is called in read-only mode,
it should populate its fields with values
provided by the getCustomerData web service,
- when the form is called to create a new
customer (in read-write) mode, it should
not use the getCustomerData web service.
Instead it should map the input values
entered by the user into input parameters
of the createNewCustomer web service,
- when the form is called to update customer's
data, it should first display values returned
by the getCustomerData web service, and then
it should map the modified values entered by
the user into input parameters of the
updateCustomer web service,
In all the above cases I must map my view's
context data to different controller's context
elements. Doing it directly in the source code
is not a nice solution. Is there any other
way to achieve this?
Calling a form in different modes in not an
unusual thing, so I was hoping that maybe
there are any built-in mechanisms that would
solve the obove problem...
Greetings,
Tomek.

Configuration attributes on the command line

I use in a command line -Dweblogic.configurl="t3://localhost:7001" when I
start the weblogic.
configurl is my own attribute.
How I can get the attribute value "t3://localhost:7001" inside the Bean.
I tried System.getParameter("configurl") but it doesen't work.
-Jussi

I beleive -Dweblogic.RootDirectory=<mydirname> will do the trick.
Yash Sathaye wrote:
Is it possible to change the working directory of a managed server? I
am using WLS 6.1SP2 on Solaris. WebLogic was installed by user A. The
EAR file was deployed using the IIOP and management EJB's provided by
BEA. That was done by user B. User B wants that the managed server
he/she created should use a directory other than the weblogic
installation directory as the working directory (for creating the log
files, for extracting classes from the EAR etc. etc.) The reason for
this that user B does not have write access to the weblogic
installation directories.
Is there a way to change the working directory of the managed server
on the command line while starting it? Are there any configuration
attributes like bea.home or weblogic.Domain etc. etc. that we use to
start the managed servers?
Please let me know
thanks in advance

Display entity-attributes and global-attributes in the same screen

Hi,
I have a question about entity.
Is it possible to display in the same screen, entity-attributes and global-attributes?
thanks
Rosalia

Hi Rosalia,
You can only display attributes from the current entity and the entity or entities that it is contained by (the parent entities).
So if you had the following data model
Global
..the person
...the income
the person is contained by global.
the income is contained by the person (which is contained by global).
If you want to create a person-level question screen, you can display global attributes on that screen by using subsitution like %global_field_1%. You cannot, however, input global attributes on that screen (ONLY attributes belonging to the person)
If you want to create an income-level question screen, you can display attributes from the person such as "tell us about %person_name%'s income..." as well as global attributes. Again, you cannot input person or global attributes on that screen (ONLY attributes belonging to the income)
However it only works from child-to-parent containment relationships! You cannot have a global question screen which loops through the person instances and displays attributes from the person, or from the income out-of-the-box.
We have managed to implement this using custom controls.
You can map individual attributes back up to the parent level, and then display them,
such as
the first person's name = InstanceValueIf(the people, the person's name, the person's id = 1)
the first person's name is now a global attribute and can be displayed on global question screens.
Hope this helps!
Ben

Error while changing the Display Attribute into Navigational Attribute

Hi all.. Gud Mrng.
I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
Error Message: u201CThe Info object is being used in several data targetsu201D
My Questions:
i) Do I need to delete the data from all the data targets (where this info object is using)??
ii) Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
Thanks in advance.
Thanks & Regards,
B Venugopal

Hi Garima
Only in case of key figures we cannot change it from display to navigational.
If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
I am sure you know that these settings only mean if a IOBJ can be used as display or navigational. To use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
Cheers
Umesh

Reporting on an Attribute of an Attribute

On my current project we are trying to run a query based on an nav. attribute of an attribute. The reason for this is due to the master data relationships changing, which doesn't allow us to use both specific dimensions in a cube.
For example:
Our current business process allows the reassignment of a contract object to a different business partner. Data is loaded into a cube that contains both business partner and contract object as dimensions. The problem lies when the relationship of CO to BP is changed. The master data will be updated with the new change, however when reporting off the data in the cube, the integrity of the data will be compromised. Is there a way to remodel this or to execute some type of realignment of the attributes to be able to accomodate the master data relationship change?
Thanks in advance!

Hi David,
In a query, insert in Column area a key figure (not important). Then right mouse click on Indicators header and select new formula. In the next pop-up in left area you will see the option Formula Variable. Right Mouse click on it and select New Variable.
Then select replacement path and select in the next steps the father navigational attribute and the attribute you want to introduce.
Then introduce this formula variable in your query.
Try, I am not able to make a test in this moment.
Ciao.
Riccardo.

Could you explain how the read-write-backing-map-scheme is configured in...

Could you explain how the read-write-backing-map-scheme is configured in the following example?
<backing-map-scheme>
 <read-write-backing-map-scheme>
 <internal-cache-scheme>
 <class-scheme>
 <class-name>com.tangosol.util.ObservableHashMap</class-name>
 </class-scheme>
 </internal-cache-scheme>
 <cachestore-scheme>
 <class-scheme>
 <class-name>coherence.DBCacheStore</class-name>
 <init-params>
 <init-param>
 <param-type>java.lang.String</param-type>
 <param-value>CATALOG</param-value>
 </init-param>
 </init-params>
 </class-scheme>
 </cachestore-scheme>
 <read-only>false</read-only>
 <write-delay-seconds>0</write-delay-seconds>
 </read-write-backing-map-scheme>
</backing-map-scheme>
...Edited by: qkc on 30-Nov-2009 10:48

Thank you very much for reply.
In the following example, the cachestore element is not specified in the <read-write-backing-map-scheme> section. Instead, a class-name ControllerBackingMap is designated. What is the result?
If ControllerBackingMap is a persistence entity, is the result same with that of cachestore-scheme?
<distributed-scheme>
 <scheme-name>with-rw-bm</scheme-name>
 <service-name>unlimited-partitioned</service-name>
 <backing-map-scheme>
 <read-write-backing-map-scheme>
 <scheme-ref>base-rw-bm</scheme-ref>
 </read-write-backing-map-scheme>
 </backing-map-scheme>
 <autostart>true</autostart>
 </distributed-scheme>
 <read-write-backing-map-scheme>
 <scheme-name>base-rw-bm</scheme-name>
 <class-name>ControllerBackingMap</class-name>
 <internal-cache-scheme>
 <local-scheme/>
 </internal-cache-scheme>
 </read-write-backing-map-scheme>

The order of attributes from an Attribute Group is not reflected in Excel Add-in

It looks like the order of my attributes in an attribute Group is not reflected in the Filter dialog in the Excel Add-in. Any way that I from server side can handle the attribute order in Excel?
The order is correct in the Attribute Groups in the Web UI.
/Stig

Dear Sai,
Take help of ABAPer to capture the header or item text in to the print copy of sales order ,delivery and invoice.
I hope this will help you,
Regards,
Murali.

Exclusive attributes and compound attributes

hi
i want to know wat r exclusive attributes ,compound attributes and transitive attributes.

Hi,
Compounding attributes are superior Attributes .
The following link will give you the Compounding Wwith Example :
http://help.sap.com/saphelp_nw70/helpdata/en/6f/c7553bb1c0b562e10000000a11402f/frameset.htm
Transtive Attribute : This is it self is a Display attribute.
Ex :
0EMPLOYEE ( Say as "A")
- > 0EMPNAME (Attr of 0EMPLYOEE) ( Say as "B" )
-> 0EMPDSG ( Attr of 0EMPNAME) ( Say as "C" )
As per the aove example "B" is attribute of "A" and "C" is attribute of "B".There is direct relation between A & B and B& C.Be coz of B is denpendent on "A" C will also have dependent on "A" indirectly.So in this case we will call "C" is Transitive attribute of "A".
Regards
Ram.

Compound attribute and transactional attribute

hi experts,
what is compound attribute and transactional attribute, in what case we will use this attributes, can anybody explain with business scenario, pl help to understand this.
thanks & regards
venkat

Coumpounding attributes is an attribute which is compounded with another infoobject. This brings unique data relationship. Suppose u have company codes like CC1, CC2, CC3 and you have employees E1, E2, E3...The employees codes will be same in each company code. To make them unique across we compound the employeee code with company code. The it will result as below.
CC1 - E1, E2, E3
CC2 - E1, E2, E3
CC3 - E1, E2, E3
Again the other one must be a transitive attribute and not transactional attribute. When an navigational acts as another attribute as navigational attribute then the other is called transitive attribute.

Multi-Message-split with ABAP mapping and adapter specific attributes

Hi all,
With ABAP-Mapping I split 1 message to n messages.
So many files are generated in file-Adapter.
Everything fine.
But now I want the file names different using adapter specific attributes.
It is not possible to use variable substitution and write the file name in payload because of receiver restrictions.
I tried this with following similar coding in ABAP-Mapping:
data: lt_records TYPE MPP_DYNAMIC_TAB.
 Loop.
 l_file_name = "payload-Inbound"-information
 ls_record-namespace = 'http://sap.com/xi/XI/System/File'.
 ls_record-name = 'FileName'.
 ls_record-value = l_file_name. "l_file_name comes from inbound-payload
 append ls_record to lt_records.
 Endloop.
CALL METHOD dynamic_configuration->set_all_records
 EXPORTING
 records = lt_records.
If I start the interface I see in the monitoring the dynamic configuration with many entries for file-name in the the SOAP-Header mapping of the request message (following extract):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPAADDRESS.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPABROKERROLE.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACOMPANYSEGMENT.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACUSTOMERROLE.XML</SAP:Record>
The result is that all files have the same file name (last entry in dynamic configuration).
Is it possible to write the adapter specific configuration in ABAP-mapping for every single result message??
Thank you for your help,
Florian

Hi Florian,
I've a different idea...I dont think its a "right solution" but just another work around..it involves a BPM...
In your ABAP mapping..set the dynamic config with as many variables as number of different messages...i.e. use the variables like 'FileName1', 'FileName2'...'FileName6' instead of 'FileName'. But use the same namespace 'http://sap.com/xi/XI/System/File'
Call the above mapping in a BPM and capture the individual messages and set the attribute 'FileName' from the values of 'FileName1' to 'FileName6' accordingly using Message Mapping and then send the message using the 'Send' step.
before you try this, try using the variable names 'FileName1' ...'FileName6' in the receiver adapters...enable the ASMS. I know we need to select which variables from the dynamic config to be used by the adapter by specifically selecting 'FileName', 'Directory' etc...but just give it a try and see if it works..
Or..instead of using a BPM..you can combine Henrique's idea...use Adapter module to set the value for 'FileName' from variables 'FileName1'...'FileName6' accordingly.
hope I'm clear..lemme know if you have any questions..
cheers
praveen

SAML - USer Principal mapped on a SAML attribute - How to do ???

Dear security experts,
I have configured on my weblogic platform a Sender vouches SAML profile.
I am trying to map the UserPrincipal (the one I get from the webServiceContext in my web service) to a SAML attribute (different from the SAML subject).
I have written a class that implement the interfaces SAMLIdentityAssertionNameMapper and SAMLIdentityAssertionAttributeMapper .
Here is an overview of the simplified implementation :
public String mapNameInfo(SAMLNameMapperInfo info, ContextHandler handler) {
return "user2";
public void mapAttributeInfo(Collection<SAMLAttributeStatementInfo> attribStmts, ContextHandler contextHandler) {
Set<Principal> principals = new HashSet<Principal>();
principals.add(PrincipalFactory.getInstance().createWLSUser("user1"););
((SecurityTokenContextHandler)contextHandler).addContextElement(ContextElementDictionary.SAML_ATTRIBUTE_PRINCIPALS, principals);
After weblogic has loaded my SAML assertion, I can see in the log that my uibject has two User Principal : user1, user2. When I call getUserPrincipal in my webservice, I always get "user1". I need to get "user2".
Why mapNameInfo() always has the priority ? Is it the good way to implement this mechanism ?
Thanks for your help.

Gyan:
How is that possible? If you import the VOImpl inside EOImpl, the import statement is ok. But how would you use that? There is no findViewObject method? The OADBTransaction class that I can use has only findObject method that one can use and I tried that but wasn't successful. Shouldn't you have to import OAApplicationModule and a host of other classes? Is that even possible?
I thought about the entity expert approach but I don't have a need to execute any query. I just need to refer to the view attribute from within the EOImpl. That's what I am looking for. If there is a way to refer to a view attribute from within the EOImpl without having to populate that attribute in a session/transaction variable that would be a better solution for me because there may be more attributes that I need from different VOs later on and everytime I need some VO attribute I don't have to create and populate a session/transaction variable.
Please let me know if it can be done. Can you please elaborate more on your proposal? I really appreciate your time and help. Thanks!
- Muzammil

XML Gateway Mapping of XML Element Attribute

Hi:
If an inbound XML message contains this tag:
<STATUS CODE="100"></STATUS>
is it possible to map the CODE attribute to a database column?
I've been attempting to do this but I'm receiving this error: Element STATUS not complete, expected elements ''.
Thanks.

I'll answer my own question here. Found the section in the XML User Guide about mapping HTTP Error Responses (chapter 22 in the v6.1 pdf) and realized that the XML gateway had preconfigured settings to handle various error conditions. Edited the error handling configuration for the specific Handler (rather than the global setting) and checked the box to allow the error to pass through the XML gateway. Redeployed the subpolicy.

Database control does not map to an XML attribute

Hi
Im trying to execute a stored procedure that would return me an XMLBean. During this process, the database control returns me an XMLBean, but doesnt map the XML attributes if any contained in the XSD. All data is mapped to the elements only. Kindly let me if anyone knows how to resolve this to map to the attributes.
Thanks
Kishore

Hi
Im trying to execute a stored procedure that would return me an XMLBean. During this process, the database control returns me an XMLBean, but doesnt map the XML attributes if any contained in the XSD. All data is mapped to the elements only. Kindly let me if anyone knows how to resolve this to map to the attributes.
Thanks
Kishore

Need help configuring Attribute Change in WLS 6.1

Hi there,
I did all it said in the documentation, lacking any sight of an SNMP
trap. I want to receive a SNMP trap if the
InvalidLoginAttemptsTotalCount changes (MBean: ServerSecurityRuntime).
I use
Attribute MBean Type: ServerSecurityRuntime
Attribute MBean Name:
petstore:Location=petstoreServer,Name=petstoreServer,Type=ServerSecurityRuntime
Attribute Name: InvalidLoginAttemptsTotalCount
I enabled SNMP, configure my TrapHost and started my trapdaemon. But I
don't get any trap even though I increased the counter by doing some
logins with the wrong password. Parallel to my attribute change I also
configured a counter monitor on the same attribute, with the same
disappointing result =:-(
Can anyone help ?
Greetings,
Alex

You need to set a target for the pool. Without target
pool service won't start. Also you need to provide
initial and maximum size for the pool.
Regards,
Slava Imeshev
"Nadeem" <[email protected]> wrote in message
news:3d6d9268$[email protected]..
>
Hi Slava, thanks for the reply. Here is the connection pool definition asextracted
from config.xml. Do you see any errors in this which would cause theexception
mentioned below?
-Nadeem
************* Connection Pool element in config.xml ********
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
Name="MyJDBC Connection Pool"
Properties="user=system;password=manager" TestTableName="cabin"URL="192.168.0.11:1521:tacit"/>
"Slava Imeshev" <[email protected]> wrote:
Hi Nadeem,
Could you show us the connection pool definition?
It can be extracted from config.xml
Regards,
Slava Imeshev
"Nadeem" <[email protected]> wrote in message
news:[email protected]..
Hi,
I need to create a connection pool in WLS 7. Here are the specificsof my
environment:
1. RDBMS: Oracle 8i
2. Driver I want to use: Oracle thin 8.17 (provided with WLS 7)
3. IP address of machine on which database resides: 192.168.0.5
4. Port number: 1521
5. Name of database: MyDB
6. user: scott
7. password: tiger
Given the above,I do not know exactly what to fill out in the
following
fields
that appear in the Admin Console's connection pool creation form:
1. Name of connection pool (OK, this one I know!)
2. URL string (exactly what should it be, given above info?)
3. Driver Classname (I want to use Oracle thin 8.17, so what shouldI fill
here?)
4. Properties (exactly what should I fill here, given above info?)
5. ACL Name (completely stumped here! Documentation says ACLs havebeen
replaced
by policies in WLS 7 - so what to fill here?)
Could someone please help me correctly fill out these fields usingthe
information
I provided in the first paragraph.
BTW, I'm logged into WLS as Administrator.
Much obliged,
Nadeem

Mapping attributes to configurator attributes

Similar Messages

Maybe you are looking for