Exclusive attributes and compound attributes

hi
i want to know wat r exclusive attributes ,compound attributes and transitive attributes.

Hi,
Compounding attributes are superior Attributes .
The following link will give you the Compounding Wwith Example :
http://help.sap.com/saphelp_nw70/helpdata/en/6f/c7553bb1c0b562e10000000a11402f/frameset.htm
Transtive Attribute : This is it self is a Display attribute.
Ex :
0EMPLOYEE  ( Say as "A")
       - >  0EMPNAME (Attr of 0EMPLYOEE) ( Say as "B" )
                 -> 0EMPDSG ( Attr of 0EMPNAME)  ( Say as "C" )
As per the aove example "B" is attribute of "A" and "C" is attribute of "B".There is direct relation between A & B and B& C.Be coz of B is denpendent on "A" C will also have dependent on "A" indirectly.So in this case we will call "C" is Transitive attribute of "A".
Regards
Ram.

Similar Messages

  • Compound attribute and transactional attribute

    hi experts,
    what is compound attribute and transactional attribute, in what case we will use this attributes, can anybody explain with business scenario, pl help to understand this.
    thanks & regards
    venkat

    Coumpounding attributes is an attribute which is compounded with another infoobject. This brings unique data relationship. Suppose u have company codes like CC1, CC2, CC3 and you have employees E1, E2, E3...The employees codes will be same in each company code. To make them unique across we compound the employeee code with company code. The it will result as below.
    CC1 - E1, E2, E3
    CC2 - E1, E2, E3
    CC3 - E1, E2, E3
    Again the other one must be a transitive attribute and not transactional attribute. When an navigational acts as another attribute as navigational attribute then the other is called transitive attribute.

  • Display entity-attributes and global-attributes in the same screen

    Hi,
    I have a question about entity.
    Is it possible to display in the same screen, entity-attributes and global-attributes?
    thanks
    Rosalia

    Hi Rosalia,
    You can only display attributes from the current entity and the entity or entities that it is contained by (the parent entities).
    So if you had the following data model
    Global
    ..the person
    ...the income
    the person is contained by global.
    the income is contained by the person (which is contained by global).
    If you want to create a person-level question screen, you can display global attributes on that screen by using subsitution like %global_field_1%. You cannot, however, input global attributes on that screen (ONLY attributes belonging to the person)
    If you want to create an income-level question screen, you can display attributes from the person such as "tell us about %person_name%'s income..." as well as global attributes. Again, you cannot input person or global attributes on that screen (ONLY attributes belonging to the income)
    However it only works from child-to-parent containment relationships! You cannot have a global question screen which loops through the person instances and displays attributes from the person, or from the income out-of-the-box.
    We have managed to implement this using custom controls.
    You can map individual attributes back up to the parent level, and then display them,
    such as
    the first person's name = InstanceValueIf(the people, the person's name, the person's id = 1)
    the first person's name is now a global attribute and can be displayed on global question screens.
    Hope this helps!
    Ben

  • Calculation based on display Attribute and Nav attribute

    Hi all,
    i have a problem in sap biw 3.5 .at query designer level i have issue is
    i have master data  CHARECTRISTICS   OUC_CONTRACT having attributes mvn_date,leg_mvn_date  .i need to display union of both dates in single column.
    Regards
    satish

    Your simplest solution is to modify your infoobject and create a new attribute that is the characteristic that you wish to display. Update the transfer rule or DTP with a function that merges the two other attributes into the new attribute, and then use that attribute in your query.
    Alternatively you can set these attributes up as Navigational attributes, and then you can manipulate them as independent characteristics in your query results. But this will significantly reduce the performance of your query.

  • Error to create a new attribute and modify attribute retriever in weblogic

    Hi Experts
    I have intalled a weblogic server protected by Oracle Entitlements Server, this server contain a web app deployed, this app have policies to restrict the access to resources. For this policies i created an attribute retriever in weblogic console after, i did define an attribute to map this attribute retriever and used in a policy but, I have a problem when i try to create a new attribute or modify an attribute retriever, navigate to Home >Summary of Security Realms >"OES REALM" >Providers >ASIAuthorizationProvider clic on tab "attributes" and appears this errorr:
    Error opening /ext_jsp/security/providers/retrievers/CreateALESAttributes.jsp.
    The source of this error is:
    java.lang.NullPointerException
         at com.bea.retrievers.action.utils.BaseActionUtils.getNonALESAttributeRetrievers(BaseActionUtils.java:370)
         at jsp_servlet._ext_jsp._security._providers._retrievers.__createalesattributes._jspService(__createalesattributes.java:152)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:502)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
         at org.apache.beehive.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:119)
         at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:552)
         at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:365)
         at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
         at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
         at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
         at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486)
         at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146)
         at com.bea.netuix.servlets.jsp.taglib.skeleton.Child.doTag(Child.java:63)
         at jsp_servlet._framework._skeletons._wlsconsole.__flowlayout._jspService(__flowlayout.java:175)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:502)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
         at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130)
         at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
         at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
         at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
         at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
         at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
         at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486)
         at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146)
         at com.bea.netuix.servlets.jsp.taglib.skeleton.Child.doTag(Child.java:63)
         at jsp_servlet._framework._skeletons._wlsconsole.__gridlayout._jspService(__gridlayout.java:219)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:502)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
         at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130)
         at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
         at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
         at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
         at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
         at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
         at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:486)
         at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146)
         at com.bea.netuix.servlets.jsp.taglib.skeleton.Child.doTag(Child.java:63)
         at jsp_servlet._framework._skeletons._wlsconsole.__twocollayout._jspService(__twocollayout.java:205)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:502)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
         at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:130)
         at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
         at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
         at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
         at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
         at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
         at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
         at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
         at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
         at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
         at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
         at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    My product versions are:
    Weblogic 10.3.2
    OES WLS-SSM 10.1.4.3 + CP4
    OES Admin 10.1.4.3 + CP4
    DB 11gR1
    Anybody can help me please.
    Regards

    You need to add attribute to User Extended Attributes its an configuration object. After changes you need to restart the App / Web server. Only after restart IDM will start storing the value into repository and you can use them as global.<<attr name>>
    Thanks
    MK

  • Difference between value attribute and value attribute under Node in contex

    I have very basic question..it might be very simple but it is giving me a problem.
    I have created one Node name "Input" and value attribute "Input1" under it.
    I have just created one more value attribute named "in1" not under any Node.
    I have created two input filed in the my view.One first I have mapped the value in properties
    to variables "Input.Input1" and on another "in1".
    When I deploy and run the application one Input box is coming as readonly and other is working fine .Will anybody tell me why it is so?

    There is no major difference between value attribute and inside a node.
    It is a separation of attributes. Usually all the attributes belongs to same purpose will create in one value node. Like, calling one BAPI - requestListBAPI - it contains all the bapi related value attributes.
    For your question, one field is read only(Input.Input1), bcz that context is not created. see the context properties.....cardinality will be 0..n. Change the cardinality to 1...n (<b>or</b>) create that context element .
    In your implementation create that value node like this in your init method.
    wdContext.createInputElement();
    It will solve your problem.
    in1 - is a value attribute, which is mapped to your input element. It wont have any problem.
    Regards,
    Sri

  • Using Master Data attribute and compounded IO in Transformation

    Good day
    I have the following issue in a transformation.
    I want to u201CRead Master Datau201D from IO u2018ZSIDCONTRu2019 to display data for an attribute u201CContract Durationu201D (Key Figure).
    IO u2018ZSIDVEHCNu2019 is also compounded to master data IO u2018ZSIDCONTRu2019.
    The Source field of Rule = field u201CID_CONTACTu201D
    In my transformation my Rule Type = Read Master Data and the u201CFrom Attrib. ofu201D field = ZSIDCONTR and the IO Assignment is also = u2018ZSIDCONTRu2019.
    If I test this rule then the following error message is displayed:
    Characteristic ZSIDVEHCN compounded to ZSIDCONTR is missing in
    transformation source   
    How do I add the compounded characteristic ZSIDVEHCN to the transformation rule?
    Thanks in advance.
    Cj

    Hi,
    You should add the InfoObject ZSIDVEHCN to your target and define a mapping rule to fill it up from your datasource.
    Only when both objects are available in your mapping you will be able to perform a master data selection (since they are compounded).
    If this object is not available in your source, you should define a mapping rule to fill it up (constant? ...)
    Hope this helps.
    Best regards,
    Michel Hoefkens

  • Serial attribute and org attribute problems with item master

    IF i want to unassign an item from an org, how would i do tht
    The check is not updateable in the organization assignment tab
    Secondly:
    When i try to make an existing item serial controlled, i go to inventory tab on item master and when i change the serial control attribute GENERATION then "For some items it says APP-INV-05525: Either On Hand quantity or pending transactions exist for item, cannot change this value"
    But for same item if i choose GENERATION sales order issue than it works fine.
    Thirdly:
    How would i Use generated serial numbers..how to assign them or use them for issuing and recieving

    Regarding the 1st part of your query: Unassigning item from an Org
    You cannot unassign an item that way (by unchecking the Assigned checkbox).
    You have 2 options:
    1) Delete the item from the respective Org if it is not yet transacted in that org.
    Navigation : Items-> Delete Items
    Once selecetd this will open deletion Group screen, please enter a new group name and description and for type select Item from LOV and then in details Tab enter your item that you want to be taken out.
    Save the transaction and then click on Delete group button at the bottom of the screen --> this will raise a concurrent request.
    If it is already transacted in the respective org from where you want to delete it then system will not allow to delete the item for audit trail purpose.
    2) You can make the item 'Inactive' to prevent transactions or ordering (purchasing/sales) you can uncheck the appropriate attributes on that item in the org (assuming your attributes controls allow it at org level rather than master level).
    Regarding Serial number generation options a) At Receipt and b) At Sales Order Issue:
    a) At Receipt >> Create and assign serial numbers when you receive the item. As you move the material within inventory and until you issue it out you have to use the serial number for those transactions.
    b) At Sales Order Issue >> Create and assign serial numbers when you issue (ship) the item against a sales order. For this option serial numbers are required at ship confirm.
    Now as per the definitions given above, if there on-hand already exists in your organization(s) then you cannot set the serial generation control "At Receipt". Because in that case all existing on-hands should have serial number assigned which is not the case. On-hand should be zero to set the control "At Receipt". Hence system will prevent you from setting it to "At Receipt" when on-hamd exists. Also in your post you mentioned that you tried to change the control in Item Master, that means serial control generation attribute is set at Master level for you. In this case it will consider on-hands for that item in all the child orgs.
    On the other side if you are setting serial control generation "At Sales Order Issue" then seral number is not required for existing on-hands because it will be created and assigned during ship confirm. So system will not prevent even if on-hand exists.
    Considering the options available in the system your third question (How would i Use generated serial numbers..how to assign them or use them for issuing and recieving) not very clear. The "generated serial numbers" part is creating little confusion in mind as to what you are actually looking for.
    As explained above, if control is set "At Receipt" >> Create and assign serial numbers when you receive the item. Use the Lot/ Serial button on the right hand corner of the material transaction screen and enter the serial number.
    If control is At Sales Order Issue >> Create and assign serial numbers when you issue (ship) the item against a sales order. In the Shipping Transaction screen use Tools >> Serial Numbers option before ship confirm and enter the serial number.
    But if you have set the control as "Predefined" then, assign predefined serial numbers (by generating before hand) when you receive the item. Thereafter, for any material transaction, you must provide a serial number for each unit.
    Hope this helps.

  • Difference between Navigation attribute and normal attribute

    Hi Experts,
    What is the use of Navigation attribute in place of normal attribute? When we need to use navigation attribute instead of normal attribute?
    Thanks!
    Sapna

    Hi Sapna,
    Please try to search...this has been discussed many many times.

  • Change from display attribute to compounding attribute

    Hi,
    I have 3 info objects as display attributes of another infoobject. I want to change them to be compunding attribute instead of display attribute but I'm not able to delete them from the attributes list. Please let me know how can that be done.
    Thanks
    Nitika

    Hi,
    you need to empty the master of the IObj for which you want apply your changes.
    Delete its master data.
    Of course you'll need to delete first all the objects (cubes, ods, or other IObjs) where this IObj is used...
    hope this helps...
    Olivier.

  • Integrating Business Object Attributes and Database attribute

    Newbie using Oracle BPM 11g
    I am trying the following:
    1)Display two process fields from Business Objects (say firstname, last name) and one field which is a dropdown (say branchcode) from database using ADF UI.
    2)Initiator enters the firstname,lastname and then selects a branchcode from the drop down and submits the form.
    3)A Reviewer has to view these three fields selected by the Initiator.
    My question is how do we enable the reviewer to see the branchcode selected by the Initiator(as it is list of values from database and not from a business object)
    Sudip

    Hi,
    unfortunately this didn't solve it.
    The confusing is, that I see the System in the loaded DQE window at the metadata loader, but the corresponding business objects of this system appear without any parameters.
    I have no idea what else to do!
    christoph

  • Authorization on compounding attribute

    Hi all,
    I am probably missing something somewhere.
    Our customer wants to make queries on 0MAT_PLANT.
    They want autorization on 0PLANT.
    But RSSM shows no authorization object on 0MAT_PLANT.
    And I am not allowed to add 0PLANT as a normal attribute, since it can not be an attribute and compounding simultaneously.
    How to move on?
    Thanks,
    Udo

    Well 0PLANT was already auth. rel. and there was an auth. object for it.
    I made 0MAT_PLANT auth. rel., still nothing.
    I created an author. object for 0MAT_PLANT and look: I could check the 0PLANT box for info provider 0MAT_PLANT.
    After that I deleted the auth. obj. and removed the auth. relevancy for 0mat_plant, but the checkbox for 0plant was still there.
    I'm lost, but now it works so I won't touch it anymore.

  • Attributes and attribute values for a Product

    Hi all
    Is there any table or FM from where I can get a list of all the attributes and the attribute values linked to a particular product?
    I got tables which link product with Prod Category, Prod Category with Set types and so on.
    Could anyoe please provide me an FM which will give the attribute and its values for a particular product?
    Please help!!
    Regards
    Debolina

    Attributes created under s settype will be under the table with the name of that particular settype itself i.e Table name and the settype name are the same.
    The other part of your question of where to find the list of all settypes and their corresposing attributes, you can make use of COMM_PR_FRG_REL.
    Regards,
    Harshit

  • File and boolean attribute on item

    Hi,
    I work with Oracle9iAS Portal PL/SQL API (9.0.2.6).
    I define an item type (CAID = 213/ ID = 37399) with several attributes. When I try to create/modify an item I have problems with boolean attributes and file attributes.
    In case of boolean attributes, I'm not able to set the value to true. I try with several values (IS_ON, True, 1) but the attribute is still set to false. Is there anything wrong with the value I assign to the attribute before creating the item ? When I try to create the item and then modifying the attribute, the value stay to false.
    For the file attributes, I use the upload_blob function inside wwsbr_api and the file appear in the wwdoc_document table. I set the file attribute value with the return value of the upload_blob function.
    When I call the add_item_post_upload, an error occurs (ORA-29532: Java call terminated by uncaught Java exception: java.lang.NullPointerException : -29532)
    Is this a bug or not ?
    Thanks Eddy.
    For help see my sample code below :
    (ID of attribute, page, region are correct. I also test each type of attribute separately)
    declare
    l_master NUMBER;
    l_store portal.wwsto_api_session;
    l_custom_attribute portal.wwsbr_type.array := portal.wwsbr_type.empty;
    l_custom_attribute_id portal.wwsbr_type.array := portal.wwsbr_type.empty;
    l_custom_attribute_caid portal.wwsbr_type.array := portal.wwsbr_type.empty;
    l_custom_attribute_data_type portal.wwsbr_type.array := portal.wwsbr_type.empty;
    l_str VARCHAR2(100);
    l_Blob BLOB;
    l_filename VARCHAR2(100);
    begin
    -- set context
    portal.wwctx_api.SET_CONTEXT('ctx','ctx01','');
    -- load a session (Allow use of set_Attribute ...)
    DBMS_OUTPUT.put_line('Load session');
    l_store := portal.wwsto_api_session.load_session('ctx','ctx');
    -- set parameters
    -- item type = 'Item_ed'
    l_store.set_attribute('ITEM_TYPE', 37399); -- Item type id
    l_store.set_attribute('ITEM_CAID', 213); -- Item type caid (page group owner of item type)
    l_store.set_attribute('PAGE_GROUP_ID', 213); -- Page group
    l_store.set_attribute('FOLDER_ID', 37179); -- Page within page group
    l_store.set_attribute('REGION_ID', 3216); -- Region id within page
    -- see wwv_user_corners to determine template of page
    -- see wwsbr_all_folder_regions for region display_name and region id (for template)
    -- Get date format to insert right date string
    SELECT DISTINCT value
    INTO l_str
    FROM v$nls_parameters
    WHERE parameter = 'NLS_DATE_FORMAT';
    dbms_output.put_line('date format ins : ' || l_str);
    -- define attributes (for example, id are hardcoded
    DBMS_OUTPUT.put_line('Define attributes');
    -- 1080 = PRODUCT_CODE
    l_custom_attribute(1) := 'MEHI';
    l_custom_attribute_id(1) := 1080;
    l_custom_attribute_caid(1) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(1) := 'text';
    -- 1081 = PRODUCT_AUTHOR
    l_custom_attribute(2) := 'ESTAT';
    l_custom_attribute_id(2) := 1081;
    l_custom_attribute_caid(2) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(2) := 'text';
    -- 1469 = LANGUAGE
    l_custom_attribute(3) := 'fr';
    l_custom_attribute_id(3) := 1469;
    l_custom_attribute_caid(3) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(3) := 'text';
    -- 3 = title
    l_custom_attribute(4) := 'title value';
    l_custom_attribute_id(4) := 3;
    l_custom_attribute_caid(4) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(4) := 'text';
    -- 50 = wwsbr_text_
    l_custom_attribute(5) := 'wwsbr_text_ value';
    l_custom_attribute_id(5) := 50;
    l_custom_attribute_caid(5) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(5) := 'text';
    -- 1464 = Release date
    l_custom_attribute(6) := TO_CHAR(TO_DATE('21-JAN-2004 10:00 AM', 'DD-MON-YYYY HH12:MI PM'),l_str);
    l_custom_attribute_id(6) := 1464;
    l_custom_attribute_caid(6) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(6) := 'date';
    -- 1108 = download
    l_custom_attribute(7) := 'http://www.oracle.com/';
    l_custom_attribute_id(7) := 1108;
    l_custom_attribute_caid(7) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(7) := 'url';
    -- 1485 = CDROM
    l_custom_attribute(8) := '1';
    l_custom_attribute_id(8) := 1485;
    l_custom_attribute_caid(8) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(8) := 'boolean';
    -- 1111 = PAGE_NB
    l_custom_attribute(8) := '1';
    l_custom_attribute_id(8) := 1111;
    l_custom_attribute_caid(8) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(8) := 'number';
    -- 1783 = COVER_IMAGE
    -- get image
    SELECT BANNER
    INTO l_Blob
    FROM metadata_tbl
    WHERE PRODUCT_CODE = 'caa10000';
    -- upload image in repository
    l_filename := portal.wwsbr_api.upload_blob('BANNERupload',l_Blob, 'image/pjpeg');
    DBMS_OUTPUT.put_line('filename : ' || l_filename);
    l_custom_attribute(9) := l_filename;
    l_custom_attribute_id(9) := 1783;
    l_custom_attribute_caid(9) := portal.wwsbr_api.SHARED_OBJECTS; -- = 0
    l_custom_attribute_data_type(9) := 'file';
    DBMS_OUTPUT.put_line('Insert item starts');
    l_master := portal.wwsbr_api.add_item_post_upload(
    p_caid =&gt; l_store.get_attribute_as_number('PAGE_GROUP_ID'),
    p_folder_id =&gt; l_store.get_attribute_as_number('FOLDER_ID'),
    p_display_name =&gt; 'Insert : MEHI',
    p_type_id =&gt; l_store.get_attribute_as_number('ITEM_TYPE'),
    p_type_caid =&gt; l_store.get_attribute_as_number('ITEM_CAID'),
    p_region_id =&gt; l_store.get_attribute_as_number('REGION_ID'), --to set or default
    p_display_option =&gt; portal.WWSBR_API.IN_PLACE,
    -- p_category_id in number default general_category,
    -- p_category_caid in number default shared_objects,
    -- p_perspectives in g_perspectiveidarray default g_perspectiveidemptyarray,
    -- p_perspectives_caid in g_caid_array default g_empty_caid_array,
    -- p_author in varchar2 default wwctx_api . get_user,
    -- p_image_name =&gt; l_filename,
    -- p_image_alignment in varchar2 default align_left,
    -- p_description in varchar2 default null,
    -- p_keywords in varchar2 default null,
    -- p_file_name =&gt;l_filename, --in varchar2 default null,
    p_text =&gt; 'text field',
    -- p_url in varchar2 default null,
    -- p_plsql in varchar2 default null,
    -- p_plsql_execute_mode in varchar2 default null,
    -- p_plsql_execute_user in varchar2 default null,
    -- p_folderlink_id in number default null,
    -- p_folderlink_caid in number default null,
    -- p_publish_date in varchar2 default null,
    -- p_expire_mode in varchar2 default permanent,
    -- p_expiration in varchar2 default null,
    -- p_master_item_id in number default null,
    -- p_hide_in_browse in number default no,
    -- p_checkable in number default no,
    -- p_parent_item_id in number default 0,
    p_attribute_id =&gt; l_custom_attribute_id,
    p_attribute_caid =&gt; l_custom_attribute_caid,
    p_attribute_data_type =&gt; l_custom_attribute_data_type,
    p_attribute_value =&gt; l_custom_attribute
    DBMS_OUTPUT.put_line('Insert item ends. Item identifier : ' || l_master);
    -- Invalidate cache from SQLPLUS
    portal.wwpro_api_invalidation.execute_cache_invalidation;
    DBMS_OUTPUT.put_line('Cache invalidated');
    -- Drop session
    portal.wwsto_api_session.drop_session('ctx','ctx');
    -- Clean context
    portal.wwctx_api.clear_context;
    COMMIT;
    exception
    WHEN portal.wwctx_api.AUTHENTICATION_EXCEPTION THEN
    DBMS_OUTPUT.PUT_LINE('AUTHENTICATION_EXCEPTION : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.CANNOT_INSERT_DOCUMENT THEN
    DBMS_OUTPUT.PUT_LINE('CANNOT INSERT DOCUMENT : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.DUPLICATE_FOLDER THEN
    DBMS_OUTPUT.PUT_LINE('DUPLICATE_FOLDER : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.DUPLICATE_ID THEN
    DBMS_OUTPUT.PUT_LINE('DUPLICATE_ID : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.DUPLICATE_NAME THEN
    DBMS_OUTPUT.PUT_LINE('DUPLICATE_NAME : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.FOLDER_VERSIONING_IS_AUDIT THEN
    DBMS_OUTPUT.PUT_LINE('FOLDER_VERSIONING_IS_AUDIT : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.FOLDER_VERSIONING_IS_NONE THEN
    DBMS_OUTPUT.PUT_LINE('FOLDER_VERSIONING_IS_AUDIT : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.ILS_DISABLED THEN
    DBMS_OUTPUT.PUT_LINE('ILS_DISABLED : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.ILS_DISABLED_FOR_ITEM THEN
    DBMS_OUTPUT.PUT_LINE('ILS_DISABLED_FOR_ITEM : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_CAID THEN
    DBMS_OUTPUT.PUT_LINE('INVALID CAID : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_CATEGORY THEN
    DBMS_OUTPUT.PUT_LINE('INVALID CATEGORY : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_EXPIRE_DATE THEN
    DBMS_OUTPUT.PUT_LINE('INVALID_EXPIRE_DATE : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_EXPIRE_DATE_FORMAT THEN
    DBMS_OUTPUT.PUT_LINE('INVALID_EXPIRE_DATE_FORMAT : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_EXPIRE_NUMBER THEN
    DBMS_OUTPUT.PUT_LINE('INVALID_EXPIRE_NUMBER : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_FOLDER THEN
    DBMS_OUTPUT.PUT_LINE('INVALID_FOLDER : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_FOLDER_ID THEN
    DBMS_OUTPUT.PUT_LINE('INVALID FOLDER ID : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_ITEM_ID THEN
    DBMS_OUTPUT.PUT_LINE('INVALID ITEM ID : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_ITEMTYPE THEN
    DBMS_OUTPUT.PUT_LINE('INVALID ITEMTYPE : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_MOVE THEN
    DBMS_OUTPUT.PUT_LINE('INVALID MOVE : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_NAME THEN
    DBMS_OUTPUT.PUT_LINE('INVALID NAME : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_NUMBER THEN
    DBMS_OUTPUT.PUT_LINE('INVALID NUMBER : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_PERSPECTIVE THEN
    DBMS_OUTPUT.PUT_LINE('INVALID PERSPECTIVE : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_PLSQL_EXECUTE_USER THEN
    DBMS_OUTPUT.PUT_LINE('INVALID_PL/SQL_EXECUTE_USER : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_PUBLISH_DATE_FORMAT THEN
    DBMS_OUTPUT.PUT_LINE('INVALID_PUBLISH_DATE_FORMAT : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_PUBLISH_DATE_VALUE THEN
    DBMS_OUTPUT.PUT_LINE('INVALID_PUBLISH_DATE_VALUE : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.INVALID_USERNAME THEN
    DBMS_OUTPUT.PUT_LINE('INVALID USERNAME : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.ITEM_CREATION_ERROR THEN
    DBMS_OUTPUT.PUT_LINE('ITEM_CREATION ERROR : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.ITEM_NOT_FOUND_ERROR THEN
    DBMS_OUTPUT.PUT_LINE('ITEM NOT FOUND ERROR : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.ITEM_UPDATE_ERROR THEN
    DBMS_OUTPUT.PUT_LINE('ITEM_UPDATE_ERROR : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.MISSING_DISPLAY_NAME THEN
    DBMS_OUTPUT.PUT_LINE('MISSING DISPLAY NAME : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.MISSING_ITEM_TYPE THEN
    DBMS_OUTPUT.PUT_LINE('MISSING ITEM TYPE : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.MISSING_NAME THEN
    DBMS_OUTPUT.PUT_LINE('MISSING NAME : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.MISSING_PLSQL_EXECUTE_USER THEN
    DBMS_OUTPUT.PUT_LINE('MISSING plsql execute user : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.NAME_TOO_LONG THEN
    DBMS_OUTPUT.PUT_LINE('name too long : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.NO_ITEM_REGION THEN
    DBMS_OUTPUT.PUT_LINE('not item region : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.NO_MASTER_ITEM_ID THEN
    DBMS_OUTPUT.PUT_LINE('no master item id : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.NOT_ENOUGH_PRIVS THEN
    DBMS_OUTPUT.PUT_LINE('not enough privs : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.NULL_EXPIRE_DATE THEN
    DBMS_OUTPUT.PUT_LINE('null expire date : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.NULL_EXPIRE_NUMBER THEN
    DBMS_OUTPUT.PUT_LINE('null expire number : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.PERMISSION_DENIED THEN
    DBMS_OUTPUT.PUT_LINE('permission denied : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.PLSQL_REQUIRED THEN
    DBMS_OUTPUT.PUT_LINE('plsql required : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.QUOTA_EXCEEDED THEN
    DBMS_OUTPUT.PUT_LINE('quota exceeded : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.REQD_ATTR_MISSING THEN
    DBMS_OUTPUT.PUT_LINE('reqd attr missing : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.UNKNOWN_ERROR THEN
    DBMS_OUTPUT.PUT_LINE('unknown error : ' || sqlerrm);
    ROLLBACK;
    WHEN portal.wwsbr_api.URL_REQUIRED THEN
    DBMS_OUTPUT.PUT_LINE('url required : ' || sqlerrm);
    ROLLBACK;
    when OTHERS then
    DBMS_OUTPUT.PUT_LINE('OTHERS : ' || sqlerrm || ' : ' || sqlcode);
    ROLLBACK;
    end;

    Hi Eddy:
    On Friday, we put in a TAR with Oracle support about the identical problem. When editing an item using the API, the boolean attributes always reset. The values of the boolean attributes aren't even being changed. The only reason we need to set them again is the limitation of the API where you have to feed all attributes back in.
    So far, Oracle has said it sounds like a bug and they want to know the exact sequence of steps to repeat it.
    Rgds/Mark M.
    Portal 9.0.2.6

  • Dynamic ALV with Static and Dynamic attributes

    Hi All,
    In my requirement we have some 5 static attributes and rest attributes needs needs to be dynamically created based upon the input selections. for eg my input for start date and end date is between 201023 to 201152 then weeks between this range should apear as dynamic columns.
    i am able to create a dummy alv table display with out populating data into it but unable to set the data to it . Kindly help me in solving this issue.
    Regards,
    Sana.

    You might have created a dynamic node, bind the data to this node and after that use the SET_DATA method of ALV interface controller to set the data by passing the dynamically created node.

Maybe you are looking for

  • All of a sudden i need a password?

    my airport extreme just took a vacation...the fans have no black...tells me it recognizes the network but that i need a wap password...never did before...any way to get back wireless? did i do something wrong? my sister used her pc here last night an

  • Trouble with a app

    good day I have a hp 15 laptop with windows 8.1 I am trying to use time warner cable tv on my internet explorer I downloaded silverlite when I watch the tv my pic and sound cuts in and out bad if anyone can hel me with this I would appreate it thank

  • I'm having a "Scanner communication cannot be established" error when trying to scan to my iMac.

    Hi, I have an HP OfficeJet 6700 Premium printer connected via wireless to my iMac running the latest version of OS X Lion. I can print with no problems but when I try to scan using HP Scan 3 I get the "Scanner communication cannot be established" err

  • Sncli - Simplenote Command Line Interface

    I cooked up a command line interface to Simplenote. It's written in Python and uses Urwid for console management. sncli has a full terminal "gui" mode with vi-like keybinds (configurable!) and also supports typical command line operations useful for

  • Transfer from windows to mac

    i recently bought a macbook and i tried to connect my ipod to my macbook but it freezed and won't do anything. i previously used windows xp to update my ipod. any clue?