Mapping between one main component and two sub component

Hi Experts,
I am facing one problem.
The situation is:-
I have one main WD Component which has a TABSTRIP in a view.
In that view ,TABSTRIP has 2 tabs.
Each tab is having a view container.
So there are two view container and each view container corresponds to one sub WD.
So finally we have 2 seperate WD (Let say WD1 and WD2 ) and one main WD.
In main WD i have a Node , which is for TAB_SELECTED.It is bind witn the WD1 Node TAB_SELECTED.
Because of this whenever we change the value of TAB_SELECTED in WD1,It automatically reflect in Main WD.
But my problem is that i want to do it for WD2 as well.
I am unable to bind Node of Main WD to two diff Sub WD I.e WD1 and WD2.
How i can do this.
Please suggest.
Thanks
Mahesh

Hello Mahesh,
I think you need to create two more nodes in the main WD compoennt .
map the nodes of WD1 and WD2 to two seperate nodes in main WD.
then in the method wddomodify check for the tab_selected value.
if it is tab_1. set the value of attribute in the main WD from node mapped to WD1.
if it is tab_2, set the value form node mapped to WD2.
thanks
sarbjeet singh

Similar Messages

Difference Between One-way SSL and Two Way SSL

Hi ,
Can any tell difference between one way and two ssl. apache to weblogic server which type of ssl we can configure. Please provide information on this.
thanks

In short below is the difference:
One Way SSL - Only the client authenticates the server
- This means that the public cert of the server needs to configured in the trust store of the client for this to happen.
Two Way SSL - The client authenticates the server & the server also authenticates the client.
- This means that the public cert of the server needs to configured in the trust store of the client for this to happen.
- Also the public cert of the client needs to be configured on the server's trust store
Please refer to http://publib.boulder.ibm.com/infocenter/wmqv6/v6r0/index.jsp?topic=%2Fcom.ibm.mq.csqzas.doc%2Fsy10660_.htm. In case of Two way SSL the step numbers 5 & 6 also occur.
You can implement either of them between apache and weblogic.
Hope this helps.
Thanks,
Patrick

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

How to find the mapping between External Object Name and Business Obj.

Hello Gurus
Anyone who can help me? I would like to know is there any way to know Business Object is behind object associated to Context Node, it seems that for some cases is easy but for instance for object BuilHeader is not the case, at least for me. View BP_ADDR/StandardAddress, which belongs to UI Component BP_ADDR, has context node HEADER which is associated to BuilHeader. In case to enhance that object (to add new attributes), using EEWB, I need to know what is the business object behind that external name. Somehow I cannot find the mapping between external name BuilHeader and Business Object.
Kind regards
Aleksandar

Hi Aleks,
If you want to enhance Business Partner, the object you are looking at should be "BUPA" in EEWB. To my knowledge, there is no place where this kind of mapping is maintained.
Note 484597 describes where to find the Cookbook which describes the enhanceable objects and the enhancement process.
In case your requirement is to add table attributes, you can also take a look at the wiki link:
http://wiki.sdn.sap.com/wiki/display/CRM/EEWB-AddingTableattribute
Regards,
Nisha

Mapping between the query/report and the role with technical names - BI Sec

Hi,
How to find the mapping between the query/report and the role with technical names ?
Like in R/3 we can find the mapping using table AGR_TCODES or thourgh SUIM. However in BI all reports have tcode RRMX.
So. how to find the role for a given query/report like sales report with technical names?

I looked into this quite a while ago and cannot remember the exact details, but I think there were 3 tables needed together with a structure to explore with a function module, and you need to use the program ID to think them.
If you look in SQ01 then I am sure you will find one of the tables, and then search from there onward.
Alternately, while searching you might find a nice report which does this for you.
Hope that helps and let us know whether you find it.
Cheers,
Julius

How can I set up a wi-fi network, using one time capsule and two airport express

how can I set up a wi-fi network, using one time capsule and two airport express ?
The time capsule is near the Mac. ok
The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
is the signal so weak that is not able to go to ono room to the other ?

Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

I have one blackberry id and two blackberry's but can only receive e-mails on one device!

Hi all,
I have a problem! I have one blackberry id and two blackberry. I have given my old blackberry to my wife.
I have just setup my new phone but whilst setting up my e-mails on my new phone we have noticed that the e-mails have been transferred to my new phone but have stopped working on my old phone.
The odd thing is my wife had a previous blackberry and we were able to both get the company e-mails on each phone.
The message that appears when e-mails have been transferred to the new phone is there is another device registered to this blackberry id and only one device can receive e-mail.
How can I unregistered my old phone from the blackberry id and re-register it under my wife's details and hopefully receive the e-mails on both phones?
Please help as its vital for the business.
Cheers Nick

Hi woodbe and welcome to the BlackBerry Support Community Forums!
The BlackBerry ID is only designed to work on one device at a time. Your wife can sign up for a new BlackBerry ID by going to www.blackberry.com/blackberryid. Also, to receive email on her device, she will have to have a BlackBerry data plan configured with your wireless network provider as well.
To change the BlackBerry ID on her device, you can back it up using the BlackBerry Desktop Software, then perform a security wipe from Options>Security. Upon the reboot, sign in with the new BlackBerry ID, then you can restore the data using the BlackBerry Desktop Software again.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HT3702 Is it possible to have one credit card and two debit cards on my itunes account so that we can use different cards for different purchases?

Is it possible to have a number of cards (say one credit card and two debit cards) to be listed as the payment cards for my itunes account, so that different cards can be used for different purchases? Or can you only have one card registered on itunes at any one time?

So is there any way that three members of a family can share one itunes account but pay for their own purchases, other than inputting their own cards each time they make a purchase.
No, there is no way to do that.
Or if we all have our own individual itune accounts, can we share each other's music, or can you only sync your iphone/ipad/mac, with one itune account at a time?
You can sync content from up to five iTunes Store accounts to any given computer or device. You just will each have to copy the content into your own libraries so you can sync to your devices and have your devices authorized to all applicable accounts.
Regards.

Splitting in NEW GL with one profit center and two segments

What options are avialble for splitting in New GL when there should be one profit center and two segments - maybe characteristic derivation could solve it?

If I have understood your question correctly then you have one profit center and you want to attach two segments to it.
Segment is higher level than the profit centre. One segment can have n number of profit centres but one profit centre will have only one segment. This is the drawback in using the 'segment' in SAP. Also, it is difficult to change sengment embedded in profit centre master.
You might try using profit centre groups than segment.
-Vedavatee

A table mapping between ISO country code and ISO currency code

Hi experts,
I want to know whether there is a table mapping between ISO country code and ISO currency code.I have searched T005(Countries) and TCURC(Currency Codes).why the filed of WAERS(Country currency) hasn't maintained in talbe T005?Whether ISO country code and ISO currency code hasn't direct relation?
Regards,
Kelvin

Kelvin,
If you know the table which is having ISO Country Code or ISO Currency code,then go to that table and clik on GRAPHIC(ctrlShiftf11) which will give the foreign key relationships.I guess checking all those table displayed in the graphic will give you some lead.
K.Kiran.

Mapping between oracle data types and ms sql server data types

hello
i need mapping between oracle data types and ms sql server data types
where can i find them ?

read this
http://download.oracle.com/docs/cd/E10405_01/doc/appdev.120/e10379/ss_oracle_compared.htm

One business system and two FTP server locations

Hi,
We have one business system and two FTP server locations related to it. We have to send two different messages to this business system.
It has to be send to both the ftp server locations.
How do we configure the receiver determination and receiver agreements ?
Do we need two receiver Business systems for this?
How do we configure the receiver agreements especially?
Urgent
Regards,
John

hi
1) you must create 2 CC, each one to one FTP server.
2) how you send diferent message to each FTP yo only have to define 2 Reveiver determination, and two Interface Determination.
3)one sender Agreement
4)2 receiver agreement.
take in mind you only have 1 BS you must create 2 receiver determination, else if have 2 one receiver would be enouhgt
Thanks
Rodrigo

One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
Pls tell me and send me links/docs for this scenario.
Regards

Hi Rick,
For two receivers you require 2 interface determination, receivers determinations etc.
Go through these threads for one sender and multiple receivers:
one sender and two receiver
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
Rewrads if found helpful.
BR,
Alok

I have One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
How to proceed with this.
If my second receiver is async then how to proceed with this.
Regards

Hi Rick !
Depending on your requierements, you can create a BPM that
1) receives request from sender
2) sends request to receiver 1 / receives response from receiver 1
3) sends request to receiver 2 / receives response from receiver 2
4) do some processing with both responses
5) sends response to sender.
If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
Regards,
Matias.
ps: please award points if helpful

Mapping between the query/report and the role with technical names

Hi,
How to find the mapping between the query/report and the role with technical names ?
Like in R/3 we can find the mapping using table AGR_TCODES or thourgh SUIM. However in BI all reports have tcode RRMX.
So. how to find the role for a given query/report like sales report with technical names?
Edited by: Phoenix on Jul 26, 2008 4:15 PM

Posted in wrong forum

Mapping between one main component and two sub component

Similar Messages

Maybe you are looking for