Mapping error..Sending file back to the folder
Dear Friends / Experts,
I have a requirement, my scenario is File to proxy. When there is an error in mapping, then i need to send the file back to the source folder.
Is there any way to achive this without BPM? Also advise me the BPM steps.
Thanks in Advance
Bala.
I have a requirement, my scenario is File to proxy. When there is an error in mapping, then i need
to send the file back to the source folder
Using BPM:
1) Receive (from File)
2) Block
a) include a Exception Branch and put a send step in it (to send the File Back to the File Sender)
b) in the branch below the Exception Branch put the Transformation Step and have your mapping program assigned to it..
3) Send (OutSide the Block)...to send the message to the Proxy....
Check the feasibility of this design and get back if its wrong
Regards,
Abhishek.
Similar Messages
-
An error occurred while backing up the user's home folder
I have a user account that I'm trying to remove from a computer. I have updated to 10.5.2, and restarted a number of times and repaired permissions. There were 3 accounts on the machine I'm trying to remove, and the first 2 deleted just fine. However, this last one, the most important one, will not delete and save to a dmg file.
The error message is "an error occurred while backing up the user's home folder" shortly after beginning the process.
log file shows:
/08 12:52:49 AM authexec[266] executing /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] 2008-02-28 00:53:13.213 writeconfig[209:10b] DILDiskImageCreate: internal error - missing kDIHLCreateImageComponentsKey in return dictionary
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] 2008-02-28 00:53:13.230 writeconfig[209:10b] DIHLDiskImageCreate failed: 999 (options:{
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "create-content-spec" = {
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "iff-spec" = {
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "any-owners" = 1;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "copy-uid" = 501;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "no-cross-dev-nodes" = 1;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] scrub = 1;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "skip-unreadable" = 1;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] url = file://localhost/Users/woneal/;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] };
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "nbi-spec" = {
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] filesystem = "HFS+";
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] layout = SPUD;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] };
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] };
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "create-target-spec" = {
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "image-type" = UDIF;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] overwrite = 1;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] url = file://localhost/Users/Deleted%20Users/woneal.dmg;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] };
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] "suppress-uiagent" = 1;
2/28/08 12:53:13 AM [0x0-0xe00e].com.apple.systempreferences[197] })
any ideas?This is the correct steps to solve this problem:
1. Cancel the update (with the backing up error, of course)
2. Do a manual backup
3. Do a manual restore (your password to unlock your backup file is your AppleID password, not your IPhone keypad password)
4. Now Update your phone. This time the backup should work.
5. After it is updated, it will automatically restore, if you choose to restore not to set up a new phone.
And yes, copy all your photos manually. Your backup probabally won't include photos.
If this still doesn't work, try to stop your anti-virus software. -
Hi thee. As logical as I can be. I export a file back into my folder as a PSD. I then export that file to PS. Work on it, save and return it to LR. The file goes to the bottom of the folder from where I have to put it back in the original place, taking time and driving me slightly mad. Why does the file not go back to where it came from please? Thanks Tim
Umm, but this folder is an amalgam of two cameras and five cards, and I want them in capture order! Thanks for trying though Jim.
Cheers
Tim -
Error in File UNKNOWN.RPT: The request could not be submitted for backgroun
I receive: Error in File UNKNOWN.RPT: The request could not be submitted for background processing.
The error is on a windows Server 2008 SP2 production server. The report generates fine if I run it from within Visual studio 2008 on the server but not through IIS. The Crystal Reports is the version that came with vs2008 (10.5).
Initially I was getting unauthorized access errors so I granted full access to everyone for the bin and managed crystal report folders under program files. This fixed the unauthorized access problem but now I get the background processing error. I also tried to inpersonate an admin account with the same result. I tried to copy the crystal reports dll's to the bin folder for the project but that did not help either. I am running out of ideas. I did notice that a 16kb rpt file is generated in the Windows/temp folder every time I try to run the report.
the crashing page is here Link:[http://futuretechgroup.com/cgi-bin/crystaltest.aspx]
Here is the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 5/24/2010 12:24:56 PM
Event time (UTC): 5/24/2010 7:24:56 PM
Event ID: 87ee3d9297fb409ea7b440b059a0f07d
Event sequence: 4
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/5172/ROOT-1-129192026961318172
Trust level: Full
Application Virtual Path: /
Application Path: C:\inetpub\vhosts\futuretechgroup.com\httpdocs\
Machine name: FTG2009
Process information:
Process ID: 3644
Process name: w3wp.exe
Account name: FTG2009\IWPD_1(yanoshftg)
Exception information:
Exception type: CrystalReportsException
Exception message: Load report failed.
Request information:
Request URL: http://futuretechgroup.com/cgi-bin/crystaltest.aspx
Request path: /cgi-bin/crystaltest.aspx
User host address: 70.173.237.72
User:
Is authenticated: False
Authentication Type:
Thread account name: FTG2009\IWPD_1(yanoshftg)
Thread information:
Thread ID: 5
Thread account name: FTG2009\IWPD_1(yanoshftg)
Is impersonating: False
Stack trace: at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at cgi_bin_CrystalTest.CreateReport() in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 15
at cgi_bin_CrystalTest.Page_Load(Object sender, EventArgs e) in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 9
at System.Web.UI.Control.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)1. The OS is 32bit
2. Yes. The C drive is the primary drive
3. For the sake of simplicity and to troubleshoot the sample code has no datasource just 'Hello' in the report header. The Actual work order report that I need has ADO as datasource and it builds a PDF report without any problems when I run the page from VS2008 (development server) so I think the dll's are where thay are supposed to be. The c:\windows\assembly folder has about 25 CrystalDecisions files (10.5.37).
Do I still need to create a deployment package even though I have everything else working?
Below is the code I am using to create the report
Sub CreateReport()
Dim myReport As New ReportDocument
'Try
myReport.Load(Server.MapPath("CrystalReport.rpt"))
'Catch ex As Exception
'MsgBox(ex.InnerException.ToString)
'End Try
Dim g As Guid = Guid.NewGuid
Dim woPath As String = "../FileTemp/" & g.ToString & ".pdf"
'Try
Dim CrExportOptions As ExportOptions
Dim CrDiskFileDestinationOptions As New _
DiskFileDestinationOptions()
Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
CrDiskFileDestinationOptions.DiskFileName = _
Server.MapPath(woPath)
CrExportOptions = myReport.ExportOptions
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.PortableDocFormat
.DestinationOptions = CrDiskFileDestinationOptions
.FormatOptions = CrFormatTypeOptions
End With
myReport.Export()
'Catch ex As Exception
'MsgBox(ex.ToString)
'End Try
Response.Redirect(woPath)
End Sub -
Safari will automatically send me back to the previous page
Every time when I click a link on any website, it will automatically send me back to the page where I just was; or if I'm at the homepage and enter a website, it brings me back to the homepage. It only happens once per page but it is very frustrating having to do everything twice.
Thanks,
TiffanyHI Tiffany and welcome to Apple Discussions...
Empty the Safari Cache from the Safari Menu Bar, Safari/Empty Cache
Relaunch Safari.
If you still have problems, go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
If third party add ons aren't the issue, try troubleshooting the Safari .plist file.
Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
One more thing. Please click My Settings on the right side of this page and tell us which Mac you are using and which Mac OS X. Thanks!
Carolyn -
I have OS X Yosemite - my current version of iPhoto is not compatible with it / how do i find the correct version of iPhoto? The APP Store keeps sending me back to the same 'current version' that is NOT Compatible...
If you have Yosemite you need iphoto 9.6 from the App store - what is the exact error message you are getting?
Try dragging the iphoto Application to the trash from your applications folder (wait tot empty the trash) and then install iPhoto 9.6 from the App store
LN -
I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?
BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me? -
we transferred purchases and synced from a iPod touch to a toshiba laptop, after it updated and synced again we have been unable to put the files back onto the ipod. the computer will not let us drag or copy paste files, and when we tried to " export" the library to the documents folder, it only showed up in code. we have books and music we would like to reload to the ipod.
Hello Jean164,
Thank you for using Apple Support Communities!
It sounds like you are unable to manually put your content back on your iPod Touch.
It seems like you may need to re enable Manually Manage Music now that the device has been updated, and this article should help with that.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Cheers,
Sterling -
WHAT SHOULD I DO MORE TO GET MY FILES BACK IN THE FCP FORMAT ?
A ROUND-ABOUT PROBLEM
RECENTLY I GRADUATED FROM. FCE AND FCE HD. I DECIDED TO INSTALL FCP 5. I HAVE POWER BOOK G4 V10.4.8, PROCESSOR 1.5 GHZ PC SDRAM WITH INTERNAL MEM 80 DISK STORAGE AND 1 GB DDR SDRAM. I ALSO HAVE AN EXTERNAL LaCIE WITH 200 CAPACITY.
IN THE PROCESS OF INSTALLING FCP, THE STUPID THING I DID WAS TO CHANGE NAME OF THE MEDIA FILE, AND THIS ACTION CAUSED ALL MY FILES GO OFFLINE. THE OPTIONS GIVEN TO ME BY THE RECONNECT FILLES TABLE BOX TO GET BACK MY FILES ARE:I TRIED TO USE BOTH BUT WITH NO SUCCESS.
I WOULD BE GRATGEFUL TO ANY ONES WHO COULD HELP ME RECOVER MY FILES WITHOUT GOING INTO THE PAIN OF CAPTURING THEM FROM TAPE.
FOR THOSE OF YOU WHO HAVE THE PATIENCE PLEASE READ MOR BELOW. THANK YOU SO MUCH.
WHEN I TRY I GET A WARNING WHICH SAYS:
THE FILE FORMAT OF THIS PROJECT IS FROM AN EARLIER VERSION. WOULD YOU LIKE TO UPDATE THIS PROJECT?
NOTE: ONCE SAVED, THIS FILE CANNOT BE OPENED BY PREVIOUS VERSION. TO AVOID OVERWRITING THE ORIGINAL PROJECT FILE , YOU CAN CHOOSE SAVE PROJECT AS FROM THE FILE MENU WHEN PROJECT UPDATING IS COMPLET
WHEN I SAY YES, ANOTHER BOX APPEARS: UPDATE PROJECT. IT SAYS THE FOLLOWING:
THIS PROJECT CONTAINS ONE OR MORE SEQUENCES WHICH THIS VERSION OF FINAL PRODUCT PRO CAN RENDER WITH MOTION TAP QUALITY(NAMELY SCALIBG, ROTATION, ETC). PLEASE CHOSE A SCALING QUALITY TO USE (“FASTEST” RECOMMENDED IS THE QUALITY LEVEL 4.5.
NEW QUALIT Y CHICKED INSIDE THE BOX ARE: BEST, NORMAL, FASTEST OR LINEAR . THE UNCHECKED LITTLE BOX READS: REMOVE EXISTING FILES (THIS ACTION IN NOT UNDOABLE
WHEN I PRESS OK “OFFLINE FILES” BOX APPEARS AND SAYS:
SOME OF THE MEDIA OF YOUR PROJECT REFERENCES EITHER CHANGED, MOVED, OR GONE AWAY.YOU CAN EITHER RECONNECT THESE FILES , OR CONTINUE WITH THEM BEING OFFLINE. BELOW THIS SAYS AS FOLLOWS:
FORGET FILES. BELOW THAT THERE IS AN UNCHED BOX WHICH SAYS: MEDIA FILES 69 OFFLINE
WHEN I PRESS CONNECT INSTEAD OF CONTINUE , THE RECONNECT FILLES BOX OPENS AND 69 OFFLINES FILES APPEAR. IN THIS RECONNECT FILES BOX THERE ARE 2 SECTIONS
THE 1ST SECTION HAS A LITTLE UNCHECKED SKIP FILE BOX AND ANOTHER LITTLE CHECKED BOX WHICH READS: SEARCH SINGLE LOCATION. WHEN I OPEN IT TWO OPTIONS ARE GIVEN AS FOLLOWS:
MACINTOSH HD: USERS WITH MY NAME AND DOCUMENT
LaCILE:FINAL CUT PRO DOCUMENTS; AUTO SAVE VAULT WITH THE TITLE OF MY FILE
WHEN I PRESS RECONNECT I GET THE FALLOWING PATH :
MY NAME.>MACINTOSH HD >APTS FCT 5 >GRAY FILES
WHEN I CHANGE THE SHOW BOX TO REVEAL FILES .I GET OFFLINE
WHEN I ADD RESEACH, IT TAKES ME TO THE A CHOOSE A FOLDER WITH THE FOLLOWING PATH:
MY NAME>LACIE DISK>FINAL CUT DOCUMENT >FOLDER >GRAY FILES WHICH CANNOT BE RVEALD., AND WHICH I CANNOT CHOOSE. IT GOES ON AND ON IN A CIRCLE WITHOUT HELPING ME TO GET MY FILES IN FCP FORMQAT.
WHAT SHOULD I DO MORE TO GET MY FILES BACK IN THE FCP FORMAT WITHOUT BEING STUCK TO OFFLINE FILES FOR EVER? YOUR STEP BY STEP TO WALK ME THROUGH TO REESTABLISH MY FILES WOULD BE GREATLY APPRECIATED.A round-about problem
I thank you all for your very kind replies. I have rewritten my issue in lower case as suggested by all of you. I hope I will be helped.
Recently, I thought I had graduated from final cut express and final cut express HD when . I decided to install final cut pro. Perhaps a wishfull thinking!
I have a power book g4 v 10.4.8, processor 1.5 ghz sdram with internal memory of 80 storage disk and 1 gb ddr sdram. I also have an external LaCie with a 200 storage capacity.
In the process of installing final cut pro, I stupidly changed the name of the media file. Maybe this action caused all my clips, video and audio, files go offline. The options given to me by the Reconnect Files Table , to get my files back, are : Single Search Location and Search.
I tried and tried both with no success. I would be grateful to any ones who might be able to help me to recover my clips without going through the pain of recapturing them from the tape. There are several tapes to be recaptured.
Now, for those of you who may have the patience, please read more below to see what I have gone through.
When I try to get to the files, I get the first warning: “The file of this project is from an earlier version. Would like to update this project?” And then it continues: “Note, once saved, this file cannot be opened by previous version. To avoid overwriting the original project file , you can choose Save Project As from the File Menue when the project updating is complete”. (It was at this point where I changed the files names formatted by the previous versions).
When I say Yes, another box appears: Update Project. It reads as follows:
“This project contains one or more sequences which this version of Final Cut Pro can render with Motion Tap (i.e. scalable, rotation, etc). Please choose a scalable quality (“fastest” recommended is the quality level 4.5. New Quality checked inside the little Box are: Best. Normal Fastest or linear." I choose Normal. The unchecked little Box reads: "Remove existing files ( this action is not undoable, it says”.
(By the way, in my project no sequences, have been set up as yet; they are all clips inside the bins with red slash in all clips).
When I press OK, “Offline Clips” Box opens and says the following:
“Some of the media of your project references either changed, moved, or gone away. You can either Reconnect these files, or Continue with them being Offline”. Below this it continues:
“Forget files.” Below that there is an unchecked box which says: “Media Files 69 Offline”.
When I press Connect instead of Continue, the Reconnect Files Box opens with 69 Offline files. In this Reconnect Files Box there are two sections’
The first section has a little unchecked Skip Files Box and another little checked Box which reads: “Search Single Location”.
When I open it, two paths are given to recover my files:
My name>LaCie> Final Cut Document>Folder>Gray files which cannot be revealed, and which I cannot open. I go on and onl ike a checken without a head in a circle without being able to get to the files off Offline.
I have the same problem with the second path: My name>Macintosh HD>FCP 5>gray files.
What should I do more to get my clip files back in the FCP format without being stuck to Offline files for ever?
I am new to this field and enjoy what I am doing. I am old, and sometime my head goes off. Your expert step by step walking me through to reestablish my file linkage with Media would be greatly appreciated. Thank you all and have a nice holiday. Faruk Sabet -
I am using a mac mini version 10.9.5 which I have just updated. Now when I try to open i photo, all I get is a message telling me to "prepare" my library. I have installed and run the iPhoto library upgrader, but it only sends me back to the beginning telling me to install the upgrader (which has already been installed.)
How can I actually get the upgrader to prepare my libraries and actually see photos?What version of iPhoto are you currently running and what version did you have previous to the upgrade to 9.5.1?
Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
I'm having troubles converting my raw files from Nikon D5200 (NEF) to DNG. I tried using Lightroom 4, but it didn't identify the folder containing the files. So i downloaded the latest DNG converter but that too didn't identify the files kept in the folder location. So I downloaded DNG converter v7.3 for D5200. It identifies the folder and files; but it is giving me parsing error on trying to convert files. I'm running Windows Vista Home Edition SP1. Kindly advise. Thank you.
I probably missed this detail in what you’ve posted, but do you see the thumbnails of the three cameras’ raw files in Finder if you don’t convert to DNG?
What has happened in the past is that the Apple raw interpreter doesn’t read thumbnails of DNGs it doesn’t like, where at least one thing it didn’t used to like was embedded lens corrections for mirrorless cameras. Are the Olympus and Panasonic mirrorless—meaning there is no optical viewfinder and everything is seen on an LCD screen or perhaps an electronic view finder? If so the reason these are different is that the camera is doing the lens distortion corrections automatically and this information is stored in the raw files and in the DNGs but Apple doesn’t know how to use these embedded lens corrections or doesn’t know how to read the newer DNG spec that does allow for this information to be embedded in the DNG, at least.
Apple could just extract the embedded jpg preview and ignore the other parts of the file it doesn’t understand, but it apparently doesn’t do this.
What I’m not sure about is if the Apple raw interpreter still has this problem or if you’re on an older system without the latest updates for camera raw decoding by Apple. -
Saving a converted (save as) file to same the folder I'm in
I have over 1,000 AppleWorks files scattered about many different folders that I want to convert to Pages or MS Word. I'd like to save the converted files in the same folder that the original file is in. I know how to do the conversion but when I save the file to be converted to Pages or Word the Save dialogue box uses my desktop as the default location. I have to scroll through multiple sub directories to get back to the folder I'm in. If I convert a second file in this folder the file will save to the same folder I'm in but if I open another folder I have to do the same thing all over again. Is there a way to make the folder I'm in the default location where files are saved from the beginning? I'm usingSnow Leopard 10.6.8
Firefox 11+ versions have support via <b>browser.download.lastDir.savePerSite</b> pref to disable to disable the feature to remember the download directory based upon the URL.<br />
The browser.download.lastDir.savePerSite pref doesn't exist by default (it is hidden).<br />
Create a new <b>Boolean</b> pref with the name <b>browser.download.lastDir.savePerSite</b> and set the value to false.
You may have the clear the "Site Preferences" via Clear Recent History to remove already stored data.
*Tools > Options > Privacy : History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
See also:
*[[/questions/887248?page=2#answer-318910]]
* https://developer.mozilla.org/en/Preferences/browser.download.lastDir.savePerSite -
Question
Cannot log in to Nationwide internet banking. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorerThat issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
I ordered a new phone and shipped it to a friend in Dubai, UAE. without knowing i have to activate it by making 5minutes calls, please i need a way to activate it without sending it back to the US..any help? this has been very frustrating for me this past few days
scottxx,
That was very nice of you to provide your friend with a new phone! I am sorry to say that the device will not be able to activate while in Dubai. For a device to activate it must connect to the VZW network to become active. I apologize for any inconvenience.
LindseyT_VZW -
I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive? I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.
Short answer: You do NOT have to reinstall all your apps and copy your files back.
Longer answer: Upgrading the OS does not touch any user files. Upgrading the OS should not interfere with any applications which are compatible with Mavericks. In my experience non-Apple apps are generally left unchanged by the upgrade. It is possible that some apps may need to be upgraded. One good resource for checking application compatibility is RoaringApps.
Finally, it is always wise to backup everything, just in case.
Maybe you are looking for
-
Identify number of blanks in a string or char field.
Hi Friends, I have a issue, i have two fields of char30 and the users enters numeric values in that and i have to added the data. i have to validate the data enter by users before adding. there are chances that users may enter values like'80 0' then
-
I have a computer which needs Firefox but it does not have internet access. Could I download a full stand alone version of Firefox, copy it to a USB memory stick, and install it from there?
-
How do I download Adobe ExportPDF Onto My New Computer?
I recently bought a new computer...how do I download Adobe ExportPDF onto my new compute?
-
Hi I have created a project in cProjects 4.0. There I have created a project role and staffed it with Resource. But now when I want to delete staffing I am not able to do the same as it is not allowing me to select the staffing and action for selecti
-
[HELP!] How to add a partner to a SO document???
Hi all, I have a problem. I want to add partner F11604 to item 10, and I call FM 'BAPI_SALESORDER_CHANGE'. Actually nothing happend. Here is my code, I need your help! Thanks! lw_partners-PARTN_ROLE = 'Z2'. lw_partners-PARTN_NUMB = '000010'. lw_partn