Mapping errors not being captured in wb_rt_errors

Hi All,
We use OWB mapping to load the data from stage tables to transactional tables. However, errors are not being captured in wb_rt_errors eventhough table loading is failing. We have no clue why it is failing. Please let us know if you have any idea why the errors are not being captured ?
We are capturing the audit id during the load erros. Using the below queries to validate the data.
SELECT * FROM WB_RT_AUDIT WHERE RTE_ID=15852682 ORDER BY CREATION_DATE DESC;
SELECT * FROM WB_RT_ERRORS WHERE RTE_IID=15852682; Thanks and Regards
Nagaraja akkivalli.

I've had similar problems. I've found that the Flash CC file sometimes loses the reference to the document class file and that the source paths in the Actionscript settings are gone when re-opening a file. If I re-enter the document class (and paths) in the Actionscript Settings dialogue it will reconnect with Flash Builder.

Similar Messages

OHS - Protocol (Periodic) Next due dates are not being captured properly

Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013). The Planned date is not resetting itself for the medical service sometimes.
Any idea what might be causing this issue?
Regards
Naveen

HI Naveen
Have you overridden the std BADI for calculating Next due date?
Thanks
Jagdsh

Mapping change not being deployed

Hi All
We're experiencing an issue where any changes we make to a map or orchestration is not being deployed once the assemblies and re-deployed on the server.
I have tried the following -
1. The normal process of stopping the host instance, re-deploying the assemblies and updating them in the resources folder then restarting the host again
2. Rebooting the machine and re-deploying
Process 1. has always worked in the past, not sure what could be happening. Any clues?
Regards
Riaz

Any of the following could be the cause for your problem:
May be you’re not rebuilding your artifacts like maps or orchestration. You simply build the components. Try to rebuild the artifacts, for the changes to reflect in the assembly you deploy.
I understand that you add the assemblies in Resource folder, but may be you’re not gacing them. GAC the assemblies you have updated, restart the relevant host instance. Either use the GACUTIL
command or check the ADD to GAC checkbox when you add the assemblies to the resources folder to gac the assemblies.
May be updated assembly is deployed properly, but the section of the update code is not executed (not covered in execution) because of any data/business rule. Ensure that you have correct test
data which would execute the updated code.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Javax.swing.Timer not working or event not being captured by actionPerfrmd

Here is the code:
public class nQueensEst extends JApplet implements ActionListener {
public Timer t = new Timer(1, this);
//...the actionPerformed:
if(e.getSource() == jButton1){
            nRainhas=Integer.parseInt(javax.swing.JOptionPane.showInputDialog("Quantas rainhas voc? deseja?"));
            t.start();
            int contadorTentativas=1;
            for(int i=0; i<=100; i++){
                sol=new int[nRainhas];
                while(!rainhas()){
                  jLabel1.setText(contadorTentativas +" tentativas!!!");
                  contadorTentativas++;
                jLabel2.setText("Solu??es: "+Integer.toString(i));
t.stop();
}else if(e.getSource() == t){
     System.out.println("timer");
     rodadas++;
Any clue?
Thanks

Let me explai the context: i had to implement a classic nQueens problem using a Grasp Algorithm and a Backtrack algorithm, then in dorder to compare them, i want to make the garap one to run find 100000 solutions and register the time it is needes, then divide by 100000. so i need the timer running and making a variable increase every millisecond from the beggining until the end of the last solution. But the timer is not generating a event or the event is not being caought by the actionPerformed.

Adapteer Framework error not fully captured

Hi ,
I am using alert framework to throw alerts in case of exception. I am trying to capture errors in Adapter framework . I have used the container element SXMS_TO_ADAPTER_ERRTXT for it . It is capturing error but has size as 70 . So i am able to see only first 70 characters from error .I want to capture the whole error . Is there any way by which we can capture the entire error message .
Thanks & Regards,
Suvarna

Suvarna,
Go through the SAP Note;
Note 972303 - Values of multiline container elements are truncated
which may help you.
---Satish

Windows Network Drive Mapping properties not being associated with Test Stand deployment

I recently upgraded a TestStand/LabVIEW (Developer Suite 2012 DS1) deployment project from a Windows XP Pro OS to Windows 7 Enterprise. Now, when I run the Test Stand deployment, Network paths that used to be hard coded into my File Globals are no longer recognized. I re-wrote the vi's, and put "File Dialog" pop-ups so that I could see what path the control is being opened up at, and what appears to be happening is the Network Drive that I am defaulted to is appearing as if it is "disconnected" in the navigation window, and the path is defaulted to my root directory. I can navigate out to my network path no problem from the navigation window, and after the first time I perform this user action, subsequent executions open up to the path I have hard coded in my Sequence File Globals. However, if I reboot my host computer, I again have to go through the exercise of manually pointing to the proper network location? If I use the Windows Explorer to check Mapped Networked Drives, everything is properly mapped and connected.
Has anyone ever seen this behavior?

Hi ATE Dude 22,
I have not come across this problem before but here is a document from MSDN and one from NI which discuss file path conventions. From what I've seen, UNC is also accepted under Windows XP so I would advise using it for your file globals.
Cheers,
KyleP
Applications Engineer
National Instruments

My send messages are not being captured. all you see is the subject line.

After February 27, it seems that Thunderbird is not capturing my Sent messages. You can see the subject in the list above the line, but nothing shows up below it. If I put it in Trash, I still can't see it.
I have another mailbox on this computer, and it's working fine.
It's an old Mac (G4) running an ancient system, 10.3.9, and that supports Thunderbird 2.0.0.23
Yes, I know it's an antique, but we need to fix it right now. Please help.

It was the icon after all, and it finally worked. I think I had to clean out some of my sent mail and compact the folders first. Thank you very much.

Permissions errors not being fixed

i keep getting the same errors when i repair my permissions. can any one help? here are what they are.
*Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.*
*Warning: SUID file "usr/bin/lppasswd" has been modified and will not be repaired.*
*Group differs on "private/etc/cups", should be 0, group is 26.*
*Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .*

This is commonly known: Mac OS X 10.5- Disk Utility's Repair Disk Permissions reports issues with SUID files.
There is nothing to be concerned about.

Maps app not being apple to find places in Malaysia

I desperately need the old maps app back because the new app cannot find most of the places in malaysia. The old app always helps me but not this one, im stuck... if can i want back the old ios 5... Pls help!

Contact iTunes store support for this. Go to http://www.apple.com/support/itunes/contact/ and click the blue link next to the green shopping bag. Follow the steps and send them an email explaining your issue.

Error not being helped

HI
Since the beginning of November my btinternet email account will not let me send out group emails. I have been doing it for 5 years without problem. It's a group of around 100 people who have asked to be included on an in-house newsflash list. When I try to send my weekly updates to them I get an error message saying
554 Transaction failed : Cannot send message due to possible abuse; please visit http://postmaster.yahoo.com/abuse_smtp.html for more information
I have clicked this link and logged my complaint twenty times now without anyone even acknowledging receipt of it, let alone fixing it.
all I ask is:
that the problem gets sorted
that someone at btyahoo lives up to their 24 hour turnaround time promise
help please

There's a limit to the number of recipients. I'm not sure what that limit is, but I've a feeling it's either 99 or 199 (or maybe 100/200 ?)
Is it possible (if the limit is 99/100) that the size of your distribution has recently crept above the magic number ?

Print Doc: one mapped style not being used

Hi,
I am producing printed documentation from RoboHTML. Most of
the style mapping works correctly, but one instance does not. I
have a style named NumberedList in my project. The style attributes
in the project have no numbering option selected on the Numbered
tab, but the Number positioned within paragraph check box is
checked. I also do not use the automatic numbering feature on the
RoboHelp toolbar. The number for each step is typed manually.
In Word, I have a Numbered List style, which is what I mapped
the RoboHTML style to. It has customized numbered list attributes
set within the style through the Number and Bullets dialog. When i
have this custom numbering turned on, RoboHelp will not use the
Word style. It uses Normal instead for numbered lists. If I set the
Word style to use No Numbering on the Number and Bullets dialog,
then RoboHelp uses the Numbered List style. the text has numbers,
and it seems to use the attributes that are applied to the numbers
in RoboHelp (bold). However, in print, I want no bold and periods
after the numbers.
Any ideas as to why this might not be working or how to make
the Word number style different from the RoboHelp style? I can give
more details if needed.
Thanks,
Kelly

Mapping numbered lists has always been a problem. See the
Print topics on my site.

Text Entry Boxes and their content not being captured in Automatic Recording

I have searched the forums here and elsewhere extensively and whilst I have found people with similar issues, I have yet to find a solution. My problem is this:
I am trying to record myself using a piece of software which contains numerous text fields. In the past, when using Captivate 3, I would simply fill out these fields and Captivate would record my entries automatically. When the project was played back, the training simulation would pause and allow the user to type in the text field and provided the entry matched the options I had defined, the simulation would continue to the next step.
So, my colleague and I have since bought Adobe Tech. Comms. Suite 2 and have upgraded Captivate 3 to version 4. Ever since doing this we have both been unable to successfully capture text entry boxes with their content when recording automatically in any mode. We have checked and triple checked the settings to make sure that the automatic capture of text entry in fields is turned on yet we still cannot get Captivate to perform this task it once so easily could. We both suffer from the same problem on both of our installations of Captivate 4. We have tried recording in all modes with no success.
I am tearing my hair out as I need to come up with some sample content for a major Governmental client which would be worth a 5 figure sum to my company and I really don't relish having to manually create every text entry box as there are a LOT of them in this application!
I have also reported this as a bug to Adobe using the correct form. As yet, no response.
I would really appreciate any genuine help that can be offered by you guys.
In desperation,
Rob.

Ok, I think I've sussed it!
I've been pulling my hair out for weeks on this and after posting on here, I decided to try something and I think I may have found the problem.
I work with a laptop as I am a Trainer and therefore quite mobile. When I'm in the office, I dock my laptop and use the Extended Desktop functionality of Windows so I have my laptop screen and a second 19" monitor which i find incredibly useful as screen real estate is always at a premium. And this is where I believe the problem lies.
I performed a simple test and have repeated this test with identical outcomes everytime. Here is what I did. I fired up Captivate and Outlook and opened up a new mail window in Outlook. I then set Captivate to record the new mail window and hit record. I typed some text into the To field and the Subject field and then stopped the recording. I then previewed the results. When the new mail window was on my primary screen, (i.e the laptop) the Text Entry Box recording worked 100% fine. However, if the new mail screen was residing on my secondary screen, i.e. the monitor, the Text Entry Box recording failed!
So it would seem that Captivate 4 has an issue with seeing the text entered on a secondary monitor when Windows is running in Extended Desktop mode. I am absolutely certain this wasn't an issue with Captivate 3 as I created plenty of content without any of these problems and I was using the Extended Desktop back then.
So, if anyone else is having the same issue, and you are running an Extended Desktop, try what I did above.
In the meantime, I am raising this issue with Adobe in the hope they can get this fixed, but at least now I can carry on with my content creation
Regards,
Rob.

Screen value not being captured in Report

Hi,
I have a designed a report program with multiple tabs. When i enter data into the selection fields, its not storing the values during the start of selection event. When i save the values as variant and then use it, the program works perfectly.
Can some one tel me what peice of code can be added to read the screen values during start of selection?
Regards,
Niyaz

Hi Masood,
Thanks for your reply.
Any ways thats solved by reading the value from the form_fields table in the
DO_HANDLE_DATA event of the view.
Masood,
I have a different question as
I have a requirement wherein I have to
get a field similar to NOTES field we see in the Web UI , I tried using the textbox but i dont think we can process data inside the textbox.Is there any other way by which I can achieve this requirement.
Any suggestions will be highly apprecited.
Regards,
Sijo

Rebel T5 does not work in live view mode. Live view is enabled but images are not being captured.

troyantonik, What lens do you have and have you tried other lenses with your camera to see if they also do not autofocus when you press the shutter button down halfway? Just in case a setting may be causing this, I recommend that you reset the camera to the default settings. Please do the following:
Press the MENU button.Select the [Tools #3] tab.Select [Clear Settings].Select [Clear All Camera Settings].Select [OK].Select [Clear All Custom Func.].Select [OK].Exit the menu.If this is a time sensitive-matter, additional support options are available at Contact Us.

Hello Troyantonik,
Since the issues with your camera seem to persist, we would recommend having the camera evaluated at the Canon Service Center. You can set up service through our web site, located here.

My send messages are not being captured. Matt said to right click the folder, etc. What folder? Where?

Only the subject shows up above the line. MattAuSupport said to right click the folder, select properties and repair. But what folder are you talking about? Where will I find it?

To answer your question, it would be the folder that you are complaining about. So back to you, What folder are you having problems with? The Sent folder? Then that would be the one to right click to repair.
It is kind of like flat tires. You repair the one the air came out of.

Mapping errors not being captured in wb_rt_errors

Similar Messages

Maybe you are looking for