Mapping for ORDERS04 idoc

Hi Experts,
I have inbound scenario flat file ->XI->ORDERS04.
In my flat file I have below fields.
1)Ship to address
2)Plant Code
3)Item Text
4)Header Text
5)Pricing Condition Type
To which fields of the ORDERS04 idoc i can map the above fields?
Please help me on this.
Regards,
Prasad

Hi,
in your SAP system go to we60 tcode and give the message type as ORDERS04 and it will show you each and every field discription, which will help you in mapping.
Regards,
Sukarna.ch

Similar Messages

Multi-mapping for ibound IDOC

Hi! All
It would be of great help if you provide your suggestions on:
Mapping one XML source file to 6 IDOC receivers, 2 of them are of the same type and 4 are distinct idoc types.
I tried multi-mapping and received the following error:
"Messages in multi-message format can only be sent to one Adapter Engine"
Looks like IDOC adapter does not support multi mapping...
Can you please suggest any other option apart from using BPM(since it consumes lot of resources).
Thanks a lot!!
Regards,
Patrick

Hey
its not possible to do Multimapping over IDOC's without BPM.
other way around can be to do a single -single scenario,suppose u have 6 IDOC's to post then u need to design 6 different scenarios for them.
without BPM you cant do multimapping for IDOC or HTTP
Thanx
Aamir
Message was edited by:
Aamir Suhail

Context handling in message mapping for an IDoc to File Scenario

Hi,
Can somebody help me with this issue. I have an Idoc to file scenario. heres my idoc structure. Its a custom Idoc
Header (1..1)
Detail (0..Unbounded)
         DependentDetail (0...Unbounded)              Note: This dependentdetail is a subelement of Detail
Trailer(1...1)
I created my target structrure the same way as the Idoc structure.
My output is a simple text file. I need the output in this format
Header
Detail1
   Dependentdetail1
   DependentDetail2
   DependentDetail3
Detail2
   DependentDetail1
   Dependentdetail2
Detail3
Detail4
Trailer
Since the Detail and Dependent Detail records are unbounded .
But right now i m getting my output like this:
Header
Detail1
Detail2
Detail3
Detail4
Trailer
But the DependentDetail record in not showing up in the output file. I didnot do any context change in my mapping. So do I need to do any context handling??...If so can somebody explain me with this.
Thanks,
Adam
Edited by: hymanroth on Apr 29, 2011 11:11 PM

Thanks Kenneth foryour quick reply,
Yes, I see the payload for Dependent detail in SXMB_MONI. So as you said earlier there's a problem with my content conversion.
my content conversion is as follows:
Header.fieldNames
Header.fieldFixedLengths
Header.endSeparator
Detail.fieldNames
Detail.fieldFixedLengths
Detail.endSeparator
DependentDetail.fieldNames
DependentDetail.fieldFixedLengths
DependentDetail.endSeparator
Trailer.fieldNames
Trailer.fieldFixedLengths
Trailer.endSeparator
So As I told earlier. With the above content conversion. I am not able to get the Dependent detail record in my output file. So If there is a change in my content conversion can u check it and tell me where I went wrong.
Thanks,
Harsh
Edited by: hymanroth on May 2, 2011 7:03 PM

Questions to a Mapping for IDOC-to-File Scenario

Hi all,
I want do develop a Message-Mapping for an IDOC-to-File Scenario. A SAP System sends an IDOC to the XI-System and the XI-System should make a mapping an send a XML-File to a FTP-Server. The Strukture of the target message is very easy:
<xdoc>
 <Invoice>
 @purno
 <HeaderInfo>
 <invno/>
 <shipdate/>
 <extvalue/>
 </HeaderInfo>
 <DetailInfo>
 <LineItem>
 @lineno
 <vpartno/>
 <descrip/>
 <qtyord/>
 <cost/>
 <vendmemo/>
 </LineItem>
 </DetailInfo>
 </Invoice>
</xdoc>
The source message is an IDOC. This IDOC can contain one or more positions (E1EDP01). Those different positions should be mapped into different LineItem's (see target structure) -> so in the target file one or more LineItems can appear.
Is it possible to implement this process with a common message-mapping or have I to implement a business process?
Thanks
with best regards
Christopher

Hi Christopher,
Is it possible to implement this process with a common message-mapping or have I to implement a business process? - This thing is possible with common message mapping......you dont need business proces for it.......in msg mapping after taking the source IDOC and target xml struc, map the E1EDP01 field to LineItem field.......just check the occurance of these nodes.....it should be 0..unbounded.........so as many E1EDP01 nodes will be there in idoc, that many LineItem nodes in target will be created.......
Thanks,
Rajeev Gupta

Mandatory fields for mapping in ORDERS idoc.

Hi
I m working on File to idoc scenario for creation of sales order in ECC 6.0 , now I want to know what are the mandatory fields in ORDERS idoc which needs to be populated or else disbaled so that the sales order gets created properly in the ECC 6.0..
Pl let me know the method of finding mandatory field for mapping for any idoc and which fileds of idoc are to be disabled.
Pl help ..
ans will be rewarded .
thanks & rgds
mojib

HI,
U can disable the control record segment and in the IDOC adapter use the option apply control record from payload.
If you have set the Apply Control Record Values from Payload indicator in the receiver IDoc adapter, the following fields are filled from the IDoc-XML payload:
·        MESCOD
·        MESCFT
·        TEST
·        EXPRSS
·        STD
·        STDVRS
·        STDMES
·        SNDSAD
·        SNDLAD
·        RCVSAD
·        RCVLAD
·        REFINT
·        REFGRP
·        REFMES
·        STATUS
·        DIRECT
·        OUTMOD
·        CREDAT
·        CRETIM
read the information in below link:
http://help.sap.com/saphelp_nw70/helpdata/EN/ab/bdb13b00ae793be10000000a11402f/frameset.htm
thnx,
chirag

Mapping ansix12 to idoc orders04

hi ,
I have created the data type in the integration repository and i bought the message type for message mapping, but i need to know how to map this with idoc orders04 and im not sure with the loop concept in XI for mapping. like mapping for more than one line item.
if any one have any idea idea abt it pls helpme.
thankx.

hi ,
I have to map the ansi x12 file to idoc meta data and for mapping do i need to write a XML schema for the the ansix12 file .. i need help reagrding this .
thankx .

Use of Orders05 Interface mapping & XSLT mapping file for Orders03 IDOC

Hello Experts,
In a scenario we are sending Purchase orders and Purhase Order change from SAP to SNC through XI.
Currently Orders03 IDoc is used and standard mapping for Orders03 XSLT is used.
Now the requirement is to use the same IDOC (Orders03) but
- XSLT mapping (OrdersOrders05_ReplenishmentOrderNotification) and
- Interface Mapping (OrdersOrders05_ReplenishmentOrderNotification_01) of Orders05.
What changes would be necessary
- On SAP side,
- in the XSLT mapping, and
- On XI side.
Thanks in advance,
Suraj

Hi Suraj,
First compare ORDERS03 IDOC and ORDERS05 IDoc structures,if both structures are same then u no ned to chnage the XSL it will work fine.
If any chnages in ORDERS05 Idoc then u have to adjust XSLT as per ORDERS05 IDOC.
test interface mapping first and let me know if any error.
Regards,
Raj

Error in Operation Mapping for Idoc to File Scenario

Hi Experts,
I am doing Idoc to File Scenario for Timesheet IDoc "HRSM_C" and following step are through,
Sender agreement --> Receiver Determination --> Interface Determination
got stuck in Operation mapping, it sahows error
"Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1"
Also not all the fields of IDoc HRSM_C are transferred to the XI server as I am unable to see all the fields in xml file using transaction idx5, as I suppose the reason behind may be there are no values in those fields.
Please suggest how to resove the issue and transfer all the fields from R3 to XI in Idoc eventhough it doesn't contain any value.

Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh.

Source of xslt mapping and XSD/ XMT target structures for standard Idocs

Hi,
I am working on R/3 - XI - ICH scenario. I need xslt mapping and XSD/ XML target structures for standard IDoc like PROACT01,DELFOR01, DELVRY03. I tried to search it on marketplace but couldn't find it there. As per configuration document, these things are shipped with XI mapping content in live cache CD. But I don't have this CD with me. Can anybody tell me the source for these target structures and mapping program. ( Please share marketplace, site link or send me across the mail [email protected])
Thank you in advance.
Anand More.

Anand the other option is to import the corresponding idocs into your integration repository and then you can view the generated XSD there.
As regards XSLT mapping, you need to basically first identify as to what form you want to transform your source idoc into.
For some help on XSLT mapping check the following threads,
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/topusers.jspa%3FforumID%3D44
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode1-6&contenttype=url&content=https://Process Integration (PI) & SOA Middleware
Also have a look at my code samples,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic xslt mapping in sap xi, part i.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
cheers
Sameer

Sending IDoc Batches to SAP: Issue with Header Mapping for SNDPRN

We are sending batched IDocs from XI to SAP. We need the individual IDocs to reflect different SNDPRN values. Our mapping creates the different IDoc EDI_DC40 record correctly with different SNDPRN values. However, XI wipes out the SNDPRN values in the payload. When we define Header mapping to get the Sender Party as the XPath to the SNDPRN in the payload, then the header mapping errors out because the XPath returns multiple values.
I wanted to know if anyone has successfully implemented sending IDoc batches to SAP from XI with different SNDPRN values.
Your feedback is appreciated.
Jay Malla
Licensed To Code
Genentech SAP XI Team

Hello,
I have the same problem. I want XI send an IDOC with the SNDPOR, SNDPRT and the SNDPRN that are in the EDIDC40.
I find this in sap.help : 
Mapping
The IDoc adapter does not make any special demands on mapping. The IDoc adapter must simply be provided with an IDoc XML structure at the Integration Server outbound channel. This either already exists or must be generated by using a mapping.
If the IDoc XML structure contains a control record, it is deleted and created again by the IDoc adapter. If you want to include additional values in the control record, you must select the Apply Control Record Values from Payload checkbox in the parameters in the communication channel and provide a corresponding mapping for the values.
You can include the values from the following fields in your IDoc control record:
MESCOD, MESFCT
TEST
EXPRESS
STD, STDVRS, STDMES
SNDSAD, SNDLAD
RCVSAD, RCVLAD
REFINT, REFGRP, REFMES
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/frameset.htm
Perhaps we must use party configuration but I don't know how do this !
Regards,
Chris

Mapping issue: FCC: Idoc for each record in file

Hi,
I have file to Idoc scenario.
I receive csv file with multiple records.
The requirement is to create an Idoc for each record.
For eg.
source file
A1,B1,C1
A2,B2,C2
A3,B3,C3
After FCC
<MT>
<TRANS>
<ROW>
<A>A1</A>
B1
<C>C1</C>
</ROW>
<ROW>
<A>A2</A>
B2
<C>C2</C>
</ROW>
<ROW>
<A>A3</A>
B3
<C>C3</C>
</ROW>
</TRANS>
<MT>
I have first tested it with only 1 record to test end to end connectivity. It works as expected and Idoc is posted to target system.
Now when I am trying to send multiple records, I am getting some issues.
Below are the steps that I have taken to process multiple records:
1. Changed the cardinality of ROW (child of RecordSet) from 1 to Unbounded.
2. Changed the occurance of Idoc to Unbounded.
3. Mapped ROW to Idoc root.
I have tested the mapping in IR and it generates multiple IDOCs.
When I send the test file, it fails with error Tag found instead of tag IDOC BEGIN=
I can see the xml message created with multiple ROWs in XI by File adapter in sxmb_moni.
When I do Test Configuration in ID, with the XML message extracted from sxmbmoni, the result that I got was:_
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
This means that idoc was not created while mapping.
But the same sample message works OK in IR!
Pls help where I have missed.
Regards,
Anirudh.

Sudhir,
Thanks for your response.
FCC is working fine. I have taken the XML message in XI created after FCC from csv sample message.
I have tested this message in IR by placing it between
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
</ns0:Message1>
</ns0:Message>
It is working fine and Idocs are created in mapping in IR.
But the same sample message is creating below output ID!
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
Regards,
Anirudh.

Mapping for IDoc to File

Hi,
I am doing mapping for IDoc to file scenario.
Idoc is INVOIC02.
Source field is KRATE from segment E1EDP05
Target field is Rate.
Mapping rule is as follows.
zero when Condiditon type (E1EDP05-KSCHL ) = YCSE ( enter total 15 digits without any decimal in it. The last 2 digits will be treated as digits after decimal )
Can someone explain the mapping?
I have to map KRATE and Rate but where does KSCHL comes into this?
Please explain

TAKE HELP FROM THESE LINKS : These links can be helpful for you.
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/db0e83e8e74202a5bff527055ab7e5/content.htm
Regards,
Sandeep Kaushik

ALE: mapping IDoc fields to change document fields - TBD22 for ADRMAS iDoc

Hi,
I am currently try to find a table or way to extract the information of the TBD22 table (ALE: mapping IDoc fields to change document fields) for the iDocs/ Message Types:
ADRMAS
INTERNAL_ORDER
PROJECT
I am looking for a table that shows me to which SAP R/3 tables and fields the segments and fields of the above mentioned messages will be mapped to.
When I add one of the above mentioned message types to the table TBD22 selection criteria I always receive the notification: "No table entries found for specific key".
Could anybody determine Which table I have to use or why I cannot extract this information?
Thanks in advance!
Best regards

Hi,
Since we can not map the target IDOC when any of the field changes using nodefunctions , you can write UDF and check the same i.e if field1 changes or field2 changes or field3 changes then trigger new IDoc. This is one of the options that you can try...please try it once.
Regards
Priyanka

Mapping for Sales Order Idoc

Hi Experts,
I am facing problem with mapping for standard SalesOrder Idoc ORDERS.ORDER05.
My Source Structure is: X12 EDI850
<G_SPO1> (occrance 1..100000)
<S_PO1> (occurance is 1..1)
 <D_234/>
 <D_234_2/>
 <D_234_3/>
 <D_234_4/>
 <D_234_5/>
 <D_234_6/>
 <D_234_7/>
 <D_234_8/>
 <D_234_9/>
 <D_234_10/>
</S_PO1>
</G_SPO1>
Target Structure is:
E1EDP01
 --->E1EDP19
 --->IDTNR
Functionality is passing material numbers of EDI customers to IDTNR field in E1EDP19 filed under segment E1EDP01.
From source i will get set of material numbers, for one set 10 material numbers(In source you can find 10 fields for 10 material numbers)
Requirement: I need to send those material numbers to IDTNR (One to one mapping ).
For getting 10 material numbers i just duplicated segment E1EDP19 in target side and mapped one field of source to IDTNR target in each segment. Totally mapped 10 source fields in 10 segments.
If 20 material numbers I will get two sets <G_SPO1> will repeat two times, each time 10 material numbers. So I mapped G_SPO1 to E1EDP01
S_PO1 to E1EDP19.
My out put is coming as 10 E1EDP19 segments under E1EDP01 if 10 materail numbers.
But problem is ECC team asking to get one E1EDP19 line item value under E1EDP01 line item header. They are not accepting duplicate E1EDP19 segments under header E1EDP01.
How to acheive this with my requirement.
Appreciate your hellp on this.
Thanks & Regards,
A.Neelima.

There is no relation between D_234 and D_356.
I want to pass D_356 to KTEXT in all E1EDP01 segments which ever i will get based on the condition we implemented for E1EDP01.
Present its coming only for E1EDP01 first segment (for which i used condition with D_234), its not coming for remaining 9 E1EDP01 segments (for which i used conditions with D_234_2 to D_234_10)
If i pass sample input payload:
<S_ST>
<S_PID>
<D_350>Description</D_350>
</S_PID>
<G_SPO1>
<S_PO1>
<D_234>1</D_234>
<D_234_2/>2</D_234_2>
<D_234_3/>
<D_234_4/>
<D_234_5/>
<D_234_6/>
<D_234_7/>
<D_234_8/>
<D_234_9/>
<D_234_10/>
</S_PO1>
</G_SPO1>
<G_SPO1>
<S_PO1>
<D_234>3</D_234>
<D_234_2>4<D_234_2>
<D_234_3/>
<D_234_4/>
<D_234_5/>
<D_234_6/>
<D_234_7/>
<D_234_8/>
<D_234_9/>
<D_234_10/>
</S_PO1>
</G_SPO1>
</S_ST>
Coming Output Now: (KTEXT field is missing in last two segments)
<E1EDP01>
<E1EDP19>
<IDTNR>1</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>3</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>2</IDTNR>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>4</IDTNR>
</E1EDP19>
</E1EDP01>
Expected Output:
<E1EDP01>
<E1EDP19>
<IDTNR>1</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>3</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>2</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>4</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
Thnaks & Regards,
A.Neelima.

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

Mapping for ORDERS04 idoc

Similar Messages

Maybe you are looking for