ALE: mapping IDoc fields to change document fields - TBD22 for ADRMAS iDoc

Hi,
I am currently try to find a table or way to extract the information of the TBD22 table (ALE: mapping IDoc fields to change document fields) for the iDocs/ Message Types:
ADRMAS
INTERNAL_ORDER
PROJECT
I am looking for a table that shows me to which SAP R/3 tables and fields the segments and fields of the above mentioned messages will be mapped to.
When I add one of the above mentioned message types to the table TBD22 selection criteria I always receive the notification: "No table entries found for specific key".
Could anybody determine Which table I have to use or why I cannot extract this information?
Thanks in advance!
Best regards

Hi,
   Since we can not map the target IDOC when any of the field changes using nodefunctions , you can write UDF and check the same i.e if field1 changes or field2 changes or field3 changes then trigger new IDoc. This is one of the options that you can try...please try it once.
Regards
Priyanka

Similar Messages

  • WHAT IS USE OF CHANGE DOCUMENT FIELD?

    HI experts,
    go like this,
      mara->matnr->dataelement of matnr->further charecteristics ->change document
    in this if we select change document field what will be occured , if we deselect   thatfield what will be the changes and where will be reflected that changes.
      thanks,

    Hi,
    It is used as an Indicator for writing change documents
    <b>Use</b>
    This flag is used to create change documents for business objects.
    You can create a change document object for a business object. This change document object contains the tables in which the data of the business object is stored. Function modules that are called in the corresponding application programs and that log the changes at runtime can be generated from the change document object.
    Logging only takes place if the fields whose contents were changed refer to a data element that was flagged as relevant for the change document.
    You can go to the maintenance screen for change documents from the initial screen of the ABAP Workbench with Development -> Other tools -> Change documents.
    Regards,
    Padmam.

  • How to get change log for fields if change document flag is not maintained?

    Hi experts,
    My requirement is display the change log details for the transaction FAGLGA32.
    In this transaction we have the Field Groups block.if any change is happened for field group we need to capture the change.
    the field for the field group is RKAL1-FGFLG1 and the data element is FGFLG.
    In the data element FGFLG, the flag CHANGE DOCUMENT is not maintained.
    How to get the change log details for the fields for which the change document flag is not maintained at data element level?
    Regards,
    Ramesh

    do a modification for the data element or try Audit Trail (depends on your release)
        Audit Trail (electronic records) / Tx AUT10, AUT01, XX-PROJ-ELR, OSS 564743,517613,564645
            Note 1058984 - FAQ: Audit Trail (Transactions AUT01-AUT10)
            http://help.sap.com/erp2005_ehp_03/helpdata/DE/fc/89683c1b5fb712e10000000a114084/frameset.htm
    cheers
    carsten

  • Unable to change document through FI_DOCUMENT_CHANGE for second item line

    Hi All,
             I am unable to change document through FM FI_DOCUMENT_CHANGE for second line item (buzei 002).
             I want to change assignment field(ZUNOR) for second item line.( Please be noted that bseg-koart for this document is maintained as 'S' (G/L account).
             Please give some inputs on the same,it will be grate for me.
    Rgds,
    Raghav

    First some tests, try to change the value with transacions FB02 or FB09, if you cannot that may come from the Field Status Group associated with the account and posting keys.
    - FS03 to find Field Status Group of the account
    - SPRO then Financial Accounting, General Ledger Accounting, Business Transactions, Carry Out and Check Document Settings, Maintain Field Status Variants to find Field Status Group definition  (or SM34 on view cluster V_T004V)
    Regards,
    Raymond

  • Change documents or logs for Analysis authorisation access changes

    Is there a way to review the change history or table logs in BI 7.0 to show who assigned analysis authorizations and when it was assigned or removed?  I presume there should be a SUIM change document that shows the Analysis authorization access changes that are assigned directly to users via RSU01 or RESEADMIN when these analysis authorizations are not included in roles.
    An example area of concern is with the assignment of 0BI_ALL, having an accurate log or mechanism to track the assignments to users.

    Hi Srinivas,
    you can activate in DDIC that your entry changes will be logged.
    Go to SE11 -> Your Tablenname -> CHANGE
    Button TechnicalSettings -> Activate checkbox Log data changes.
    From now on any chenge will be logged in table DBTABLOG.
    Kind Regards
    Henner

  • How to get the Change Document Header details for a given date

    Hi All,
    Can anyone help me on this Change Document Header details(CDHDR).
    Better way to pull the information of Change Document Header details(CDHDR). No Index is maintained for the tables.
    So please suggest better Optimising techniques to get the Change Document Header details(CDHDR).
    Using this Function module : CHANGEDOCUMENT_READ_HEADERS how to import the DATE_OF_CHANGE.
    Thanks in advance
    Regards
    Chakri

    HI,
    Go through the documenattion of the FM u can get the details.. and also where used list
    Regards,
    Nagaraj

  • Updating fields when changing one field in runtime

    i have an hr (human resource) database tables
    and i build a from to query about the employee_id
    and view all details of the employee in one data block
    and another data block tabuler view the jop history of this employee
    i want when i change the department of the employee
    the jop history updated and i can see the new jop in the jop history view with the new date
    in the start date and the old jop terminated in the end date with the new date
    the structure as the folowing
    Employee_details
    employee id---- employee name-----------
    jop titel----- department----
    jop_history
    start_date end_date jop_title Department ckeckbox
    i want to when updating department the jop title in the same block
    and the jop history automatic ad an new row with the new jop its start date the day date
    and the previuos jop ended with the same date
    and front of the current jop the checked box is checked

    Unfortunatey i havent started yet. I have so far created a servlet which accesses a mysql DB passes the results to a jsp page and displays them in a table. This works fine. What i want to do now is create a second jsp page where an adminstrator can change the value of the last field for any paticular row. whether this info should be displayed in a form or table i dont know.thinking about it maybe i can populate a form with an individual DB row with the option of changing the last field in the form. does this sound like it might work or has no one got a clue what i am talking about.
    thanks

  • Change Document - Block Invoice for Payment - BAPI

    Hello All,
    I have the requirement to block an invoice for payment through the Portal.
    In FB02 transaction, we can select an item and set the "Payment Block" indicator to B (blocked) for instance.
    I would like to know if exists a BAPI that allows this update. If not, if exists a function module for that (then we could create our own BAPI).
    Thanks in advance,
    Marco

    Hi Marco
    The BAPI never sets a payment block indicator by itself. It doesn't do so even when you have a payment release workflow
    activated where FB01 would automatically set the indicator.
    For BAPI calls you must always pass the payment block indicator in ACCOUNTPAYABLE-PMNT_BLOCK or code a user exit as described in note 487722 to populate the indicator automatically.
    In the normal FI posting transaction code, for example:FB01, system will read the customziing in Tcode OBB8 ->if Block key is defined and the flag of Transfer payment block when changing terms of payment is on, the system will set the this payment block into corresponding line items in which this payment term is used. please refer to source codes:
    Main Program     SAPFF001
    Source code of   SAPFF001
        CALL FUNCTION 'FI_FIND_PAYMENT_CONDITIONS'
          EXPORTING
            i_zterm            = bseg-zterm
            i_bldat            = bkpf-bldat
            i_budat            = bkpf-budat
            i_cpudt            = bkpf-cpudt
            i_zfbdt            = bseg-zfbdt
            i_funcl            = t020-funcl                     "ERP05
          IMPORTING
            e_t052             = t052                   <<<<< import customizing in T052(Tcode:OBB8)
            e_zfbdt            = bseg-zfbdt
            e_sklin            = sklin1
          EXCEPTIONS
            terms_incorrect    = 4
            terms_not_found    = 8
            no_date_entered    = 12
            no_day_limit_found = 16.
        CASE sy-subrc.
          WHEN 0.
          WHEN 4.
            MESSAGE e737 WITH bseg-zterm.
          WHEN 8.
            MESSAGE e100 WITH 'T052' bseg-zterm.
          WHEN 12.
        MESSAGE.
          WHEN 16.
            MESSAGE e024 WITH bseg-zterm bseg-zfbdt+6(2).
        ENDCASE.
    *------- Zahlungsschlüssel und Zahlungssperre vorschlagen -
        bseg-zlspr = t052-zschf.    <<<<<<<< payment block is set
        bseg-zlsch = t052-zlsch.
      ENDIF.
    Hope above explanation are useful for you to find the solution.
    Best Regards,
    Gladys xing

  • EREC: Multipal IDOC are getting created in receiver system for one IDOC

    Hello Experts,
    I ran in to one wearied issue in IDOC creation in Receiver system. I am running PFAL in sender system for only Person but 10 IDOC are getting created in receiver system. I don't know why is this happening.
    This issue started popping up after we ran RBDAPP01-Inbound Processing of IDocs Ready for Transfer. We ran this to change IDOC to 53 status. Now I don't know what went wrong but Perner distribution is behaving
    Appreciate your help.
    Regards,
    Krishna Bidwai
    Losangeles USA.
    818 527 0204.

    Yes, employee is getting created after adding 0003 into the filter, but can u please answer my another question, i.e. PERNR in sender and receiver system should be same.
    So in Receiver system (ECC) do i need to maintain external number range for PERNR?
    Thanks

  • Material bapi custom field change to be logged in change document

    Hello all,
    I have just added a custom field to MARA table (materials), and updated it successfully via BAPI_MATERIAL_SAVEDATA.
    I would like now to log changes via change documents but problem : after having changed value from "A" to "B" for example, I don't see the changes (to do this, I call function CHANGEDOCUMENT_READ with parameter OBJECTCLASS = "MATERIAL" and get results from returned EDITPOS parameter).
    What is surprising me is that I can see changes of other standard and custom fields (this was done by other people in my company 2 years before but I don't have any trace what they did).
    Do you have any idea what customizing need to be changed or what else need to be done, to log changes of new custom fields into change documents?
    Thanks a lot.
    sandra

    In this transaction, there is nothing related to fields; there are only objects (like MATERIAL) and tables (like MARA).
    I can't see anything which makes the difference between our 2 custom fields MARA-ZZCOLLANA (which is logged in change documents) and MARA-ZZSSCOLL (which is not logged in change documents).
    For info, my SAP version is R/3 46C.

  • How to trigger change documents based on inbound-idoc?

    Hi experts,
    Currently I'm working in on a project where I have to create an interface based on IDOCS. This is an interface for two SAP-HR systems.
    If there are made changes in the dialog (gui) by a user, there will be created a change document, which can be displayed by report RPUAUD00. For the inbound-interface based on idocs it's important that there will also be created a change document in the system based on this idoc. We have tested this, but no change document is created.
    Can anybody help me to solve this problem: "How to create a change document based on the inbound-idoc?"
    Thanks in advance.
    With kind regards,
    Roy

    Thanks for responding. First, I like the idea of defining an event, but I'm still stuck with how to trigger it. I looked at dynamically registering events, and maybe doing something where a click on the graph control registers an event for key presses on the vi. I'd still have to figure out out to terminate the key press event. Unfortunately, (actually it's a feature I like..) there are a number of different ways to complete typing in a scale change. I routinely use ctr-enter (habit from working on a laptop), though enter works fine, and clicking somewhere else is probably the most common method. I am not that familar with User Defined Events, so I may be overlooking something obvious here.
    The graphs are a Bode Plot, with a seperate graph for RPM vs Phase Lag, and RPM vs Magnitude. I want them to always be plotted on the same x-axis. The plot is generated when the user doubleclicks on a dataset. After that, it's just the user looking at it. They can change the axis without any new data being generated.
    Thanks,
    Chris

  • F150 dunning- create change documents in FI journal

    hi all,
    when running F150 in update mode the dunning information is updated in the FI posting.
    however, no change documents are created for the FI posting.
    Is this possible to achieve and how?
    If I change dunning fields manually via FB02 I get the change document for those fields. I would like to get this also for the F150 program execution.
    Thanks in advance
    Hein

    Hi,
    maybe SAPNET note 609773 is helpful (depending on your SAP Release).
    best regards, Christian

  • Unable to proceed in change document are not updating in CDHD, CDPOS tables

    Hi all,
    This is a question related to Change document.
    I created one custom Change document object ‘ZBUDGETS’.
    As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ‘ZBUDGETS’.
    I included some of the authorized fields from FMIT table on which we placed the trigger.
    And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
    Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
    the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
    Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
    Prabhakar

    CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
    You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
    Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
    -Kiran
    *Please reward useful answers

  • Change Documents for batch characteristics

    Dear Guys,
    Badly in need of your help !
    In our project, we are required to report changes made on batches characteristics.
    My program fetches records from CDPOS table that has change doc. object as 'CLASSIFY'.
    The challenge is to find the new and old value. They are not directly stored in VALUE NEW and VALUE OLD. They are simply '1'.
    I'm sure that they are stored somewhere in the database because the vlaue before and after change can be seen in the transaction mch3n via menu-> Display Change Documents.
    I tried hard finding the table-field but looks like its not straight forward. This is really challenging.
    Regards,
    Ashok

    Gert,
    The change done in the project profile will only affect newly created projects.
    Have you checked if change documents are created for new projects?
    Hope this helps
    Rgds
    Martina

  • Problems in extracting changed documents

    Hi Experts,
    I am new to sdn and this is my second post, My requirement is to extract changed documents from CRM to BW as they are neither stored in any database tables nor i think i can fetch them through function module but I can view them in for example in Business Partner transaction under Extras menu->changed documents i can find the records which i need to pull , would anyone suggest me what are the steps I need to follow in order to extract them to BW.I appreciate it in advance and If you need any additional information let me know.
    Thanks
    Regards
    Kishore

    Hi Marco,
    when i checked to know where exactly the changed documents are stored after choosing Change Documents in Extras menu I see a structure CDRED in technical Information screen after pressing F1 on any field in changed documents but when I check in CDHDR or CDPOS I didnot see the documents which I am expecting. Would You please suggest me some steps how to pull records using structure CDRED or If I am wrong please correct me as I am new to CRM BW and also I appreciate if you would explain me in detail.
    Thanks
    Regards
    Kishore.

Maybe you are looking for