Mapping IDOC error

Hi experts,
I'm doing my first scenario IDOC to JDBC, i've problem with mapping
I don't have seen any example in this forum of mapping IDOC, only i have seen the document :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
in this document says about party, only this is possible?
i've testing mapping with payload and message 'XML not well-formed' occurs, i've comparing this message with message download testing and i don't see differences..
the error in runtime workbench is:
'com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_MM_MATMAS03IDOC_TO_MT_MATERIALES_:
RuntimeException in Message-Mapping transformatio~'
very thanks

Hi,
The error XML Not well formed means that the XML that you've used as a test in message mapping does not conform to XML coding standards.
What you can do is to find a sample XML in SXI_MONITOR then right-click on the lower-right pane then click view source. Copy the all the values using ctrl+a and ctrl+c. Then under test tab in message mapping, click the src or source text view and paste the payload there (overwrite the empty one). Then you can test the mapping for transformation.
Hope this helps,

Similar Messages

IDoc Error 51 - Make Entry in All Required Fields

hi,
I am using a scenario where an idoc is being posted into an R/3 system from a legacy application. For some reason I keep getting Idoc error 51 (Document not posted).
Once I drill down further, the specific error states "Make entry in all required fields". Have checked to make sure all mandatory fields have been mapped and proper constant values have been specified.
But cannot seem to get rid of the problem. Could anybody help out in determining how else to troubleshoot this and identify the possible cause?
thx,
Manpreet

Manpreet,
What IDoc Type you are trying to post ? One way is debugging the inbound function module using WE19. The second option is talking to a functional consultantor who worked, what fields are needed for that particular IDoc.
I wouldn't care much about whether the IDoc is posted or not because, it is the ABAP ALE/EDI consultant's job to do that. The only way XI Developer is concerned is when it is not posting, ABAPer would tell what's missing.
Hope this info helps.
regards
SKM

File to IDOC - Error Inbound -56

Hi,
I am doing file to Idoc. (CREMAS01).. My scenario in
RWB is successful. But in R/3 it is shwoing IDOC
error :"EDI: Partner profile inbound not available".
I created Partner Profile in R/3(logical name of BS-
sender file). Still is shwoing Error.
Regards,
Mukharji
Message was edited by: Mukharji T

Hi Mukharji,
I hereunder give you the step by step procedure for File to IDOC scenario. Cross check whether you have done all these:-
SLD
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps you.
Regards.
Praveen

Runtime Mapping Transformation Error

Hi Experts,
I am doing a file to idoc scenario in which the sender system is MDM and the Idocs are to be received in the R/3 system.
I have generated XSD from the IDOC itself , that is MATMAS05 and used it as the source structure by importing in External Definition and the targer is of course the Idoc.
In SXMB_MONI i get the Runtime Mapping Transformation error. What can be the reason for this.I read somewhere that the XSD and the xml file that is being picked might have different structures.
But i checked and they are same.
Only the problem can be with the encoding part.
In the XML structure of the Idoc , it is UTF-8 and also after exporting it to file it is UTF-8. But after importing it in the External Definition,it becomes ISO-8859-1 and we are unable to change it.
Also, the xml file that is given from the MDM system has encoding as UTF-8.
Kindly help.
Thanks in Advance.
-Shweta.

Hi,
1) check out imported xsd is correct , valid. Hope while importing you have used Type as "XSD" and then after importing, check out the messages tab to know this
2) In the mapping, did you map all the madatory fields ? like some of the attributes like BEGIN? For this BEGIN attribute map with constant value. also check all the mandatory nodes/fields
3) check the mapping in the mapping editor independently in Repository by picking the input xml from the SXMB_MONI. So that you can test the mapping
Hope this will solve the mapping problem. btw, it is prefer to have exact error posted here.
Regards, Moorthy

IDoc error In case of ERS procedure, please enter terms of payment

Hi,
I tried to use BAPI_PO_CREATE1 to post purchase order. However, I encountered this error.
IDoc error In case of ERS procedure, please enter terms of payment
I passed the payment term in IDOC PORDCH. Segment E1BPMEPOHEADER-PMTTRMS has value filled out. This value is passed into the BAPI correctly but for some reasons, it got cleared out in the BAPI. Any ideas or suggestions would be greatly appreciated.
Thanks

Check
BAPI_PO_CREATE1 - E 06 436 In case of account assignment

IDoc Errors in ECC

Hi Experts,
what kind of IDoc Errors can occur in ECC for the scenario :
ECC sending <b>PO</b> to Ariba(E-commerce hub, using third party adapter) and in receiving back <b>Order confirmation</b> from it.
Thank you,
<b>MK</b>

Hi,
This depends on the design and landscape and also Disaster Recovery or High Availability Plan.
some hints:
1. Connection Problem: Because of timeout , unavailability of the Receiver system.
2. Data Problem may cause you the error in IDoC posting [ probably functional/Business Team should look into this]
3. User ID and Password Maintenance - it may hit sometimes
4. If any pre-requisite process is required to process this IDoC, then problem in the pre-requisite process will lead the problem
these all kind of problems you may face..
Rgds , Moorthy

RuntimeException in Message-Mapping transformatio error in txt to txt fcc

hi
in my design part i executed my mapping program , it executed successfully
my src is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_sarat_txttxt_sender xmlns:ns0="http://Sarat">
   <Company>
      <Header>
         <Key1>H</Key1>
         <RecordId>123</RecordId>
         <PlantName>abc</PlantName>
      </Header>
      <Item>
         <Key2>I</Key2>
         <MaterialId>456</MaterialId>
         <Quantity>def</Quantity>
      </Item>
   </Company>
</ns0:mt_sarat_txttxt_sender>
IN SXMB_MONI   i got RuntimeException in Message-Mapping transformatio error
i reffered some blog according to their sugessition do as follows
Go to SXMB_MONI and get the source xml from there and test it in the IR->Mapping Editor
my source xml is
<?xml version="1.0" encoding="utf-8" ?>
- <ns:mt_sarat_txttxt_sender xmlns:ns="http://Sarat">
- <Company>
- <Header>
<Key1>H</Key1>
<RecordId>123</RecordId>
<PlantName>abc</PlantName>
</Header>
- <Item>
<Key2>I</Key2>
<materialId>456</materialId>
<Quantity>def</Quantity>
</Item>
</Company>
</ns:mt_sarat_txttxt_sender>
when i executed in mapping editor it gives fatal error
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:130) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3)(:main:, row=2, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2668) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) -
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2668) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 3 more Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3)
but i have mapped main nodes in message message mapping.
waiting for answers,
mahesh

got it maheshwar
in FCC you have given small "m" .
<materialId>456</materialId>
but in data type its caps..
<MaterialId>456</MaterialId>
change it in sender comm channel and it will work..
dont forget to award points..
regards
pushkar

ABAP Mapping Programm error Urgent

I am getting mapping error in ABAP Mapping programm. plz help me how to solve
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">APPLICATION_PROGRAM_ERROR</SAP:Code>
<SAP:P1>Z_HBS_PAYROLL_MAPPING</SAP:P1>
<SAP:P2>SAP-ABAP</SAP:P2>
<SAP:P3>UNCAUGHT_EXCEPTION</SAP:P3>
<SAP:P4>Program Z_HBS_PAYROLL_MAPPING=========CP Include Z_HBS_PAYROLL_MAPPING=========CM001 Line 1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error in mapping program Z_HBS_PAYROLL_MAPPING (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I think this exception you need to catch it in the ABAP..
This may help u- http://help.sap.com/saphelp_47x200/helpdata/en/55/bff20efe8c11d4b54a006094b9456f/content.htm
just cross verify with this guide-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
Regards,
moorthy

Jboss/tomcat mapping configuration error

I can't even get the combination to serve a .jsp file or .html file. Regardless of the URL that I attempt, I only get a No Context configured to process this request error from tomcat and INFO [Engine] StandardHost[localhost]: MAPPING configuration error for request URI from JBoss. I've tried to access all of the various webapps under the catalina directory and can't get to any of them. I know that catalina is started because the log file shows
<Service name="JBoss-Tomcat">
<Engine name="MainEngine" defaultHost="localhost">
<Logger className="org.jboss.web.catalina.Log4jLogger" verbosityLevel="trace" category="org.jboss.web.localhost.Engine" />
<Host name="localhost">
<Valve className="org.apache.catalina.valves.AccessLogValve" prefix="localhost_access" suffix=".log" pattern="common" directory="../server/default/log" />
<DefaultContext cookies="true" crossContext="true" override="true" />
</Host>
</Engine>

<Connector className="org.apache.catalina.connector.http.HttpConnector" port="8080" minProcessors="3" maxProcessors="10" enableLookups="true" acceptCount="10" debug="0" connectionTimeout="60000" />
</Service>
</Server> in jboss.web:service=EmbeddedCatalinaSX
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Creating
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Created
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] Done with create step of deploying tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] start step for deployment file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.SARDeployer] Deploying SAR, start step: url file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Starting
2002-06-12 23:29:44,760 INFO [org.jboss.deployment.MainDeployer] Adding deployer: org.jboss.web.catalina.EmbeddedCatalinaServiceSX@7dadcd
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina debug level to: 0
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.home to: ../catalina
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.base to: ../catalina
with no errors. I'm confused because I was able to consistently work with previous versions of JBoss with no problem. The configuration seems to have changed radically, is this some recent change that I just can't find a reference to? Thanks for any help.

Hi
For Tomcat 3.x you need to use one of the following options:
(Note: this is with JBoss/Tomcat OR JBoss/Jetty)
Place you .war files in the following location:
C:\jboss-3.0.3\server\default\deploy and the app is automatically available.
If my app's name is DavidOnline.war, when deployed, I can access it at
http://localhost:8080/DavidOnline..
OR
Copy your entire development directory to the deploy direction above, RENAME your
directory from say C:\JspApps to C:\JspApps.war and you can work from that location and see your changes immeadiatly.
There is a file called jboss-service.xml that has some config options, also for the Tomcat bundle there is a file named tomcat-service.xml that has the standard server.xml section.. I suggest you check out the JBoss website, free docs and forums.. http://www.jboss.org.
Thanks, Hope this helps.

MAPPING MAPPING configuration error

I am getting MAPPING configuration error while running this code using Tomcat 4.1 on my website whereas it is running at my local webserver
Please HELP
ERROR LOG
StandardHost[site.winwinhosting.net]:MAPPING configuration error for request URI /
NewsFile read: java.lang.NullPointerException:name can:+t be null NewsFile read: java.lang.NullPointerException: name can:+t be null NewsFile read:
java.lang.NullPointerException: name can:+t be null
Bunty
<%@ page import = "java.io.*, java.util.*,java.net.URL,java.awt.*" %>
<HTML>
<head></head>
<body>
<%
// Read in the text file newsfile.txt
ServletContext context = getServletContext();
String file = (context.getRealPath("news.txt"));
//String file = "news.txt";
StringBuffer stringbuffer = new StringBuffer("");
   FontMetrics fm;
    Font f1;
    String str;
    String s;
    String tmp;
    String param;
    int i;
    int disp;
    int tot;
    int pos;
    int pos1;
    int ImageDepth;
    int TextDepth;
    int fmW;
    int dd;
    int width;
    int height;
    int j;
    char ch;
str = new String(" * Online : News * Ticker * ");
tmp = new String("");
param = new String("");
String s3,s2,s1, news = new String();
try {
DataInputStream in = new DataInputStream(new BufferedInputStream(new FileInputStream(file)));
//DataInputStream in = new DataInputStream((new URL( file)).openStream());
//stringbuffer.append(in.readLine());
//stringbuffer.append("   *   ");
//s1 = stringbuffer.toString();
//out.println(s1);
while((in.readLine())!= null)
s2=in.readLine()+ "\r";
stringbuffer.append(s2);
stringbuffer.append("   *   ");
//news += s2 + "\n";
//out.println(s2);
     in.close();
catch(Exception e) {
     System.out.println("NewsFile read: " + e);
%>
<%
news=stringbuffer.toString();
//out.println(news);
%>
<marquee><%=news%></marquee>
</body>
</html>

I think it is not able to locate your source file(New.txt). Try putting an output statement and see what is the patth it is printing and check whether it is the correct path where is your news.txt is located.
Bye

SXMB_MONI : Mapping exception error - cause unknown

Hi! ALL
I am getting a mapping exception error....
However, if i copy the payload and run it through my test tab it is getting processed successfully.
Is there any other way i can debug this issue....as i do not see any problem with payload or the message mapping and I am getting the following error...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_204: RuntimeException in Message-Mapping transformatio</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated!!
Thank you,
Patrick.

Dear Patrick,
As our experts told you can trace by using ST01 and select your ID and start the trace then again test be editing and reactivating the scenario and test it again then you ill came to know if in case any issues.
1. Other way to test the scenario is Goto RWB--> Component Monitoring --> Select Adapter Monitoring --> Then select the TEST MESSAGE TAB and give Interface details inputs or copy or take your pay load from MONI and past here and check and changes are to be made and then test the message there itself .
2. Also as u can test the message in Message Mapping TEST TAB and test the mapping and also parallely do Cache Refresh in SXI_CACHE.
3. You can also check the status of the message in SYSEM STACK of message monitoring this is different from RWB message moni
[http://Host name:PORT/MessagingSystem/monitor/systemStatus.jsp]
4. YOu can also trace the message through this system stack also.
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 30, 2009 8:53 AM

Problem with mapping [Idoc to EDI]

Hi experts,
i am facing a new problem in my mapping (idoc to edi scenario)
my target is as follow:
InvoiceDME
>Invoice 1..1
>>InvoiceHeader 1..1
>>>IncotermsCode 1..1
My Idoc is as follow:
IDOC
>E1EDK17 0..20
>>QUALF
>>LKOND
>>LKTEXT
There can be 2 scenarios in my source:
1st:
IDOC
>E1EDK17
>>QUALF = 001
>>LKOND = lkond001
>>LKTEXT
2nd:
IDOC
>E1EDK17
>>QUALF = 001
>>LKOND = lkond001
>>LKTEXT
>E1EDK17
>>QUALF = 002
>>LKOND = lkond002
>>LKTEXT = lktext002
If QUALF=002 then I have to take both values of LKOND and LKTEXT and map them to incotermcode
else if qualf=001 alone, then map LKOND to incotermcode
my mapping is as follow:
http://www.flickr.com/photos/30317046@N05/2862446903/
as you can see, the problem is if i am in my second scenario, i get the wrong value in incotercode (lkond001 instead of the concatenate of LKOND and LKTEXT for QUALF = 002)
Do you have any idea how I can solve this??
Thanks a lot,
Regards,
Jamal

Actually i used java mapping:
    //write your code here
try
     String returnString = "";
     for (int i = 0; i < QUALF.length; i++)
          if (("002".equals(QUALF<i>.trim())))
               returnString = returnString +" "+ LKOND<i> +" "+ LKTEXT<i>;
               result.addValue(returnString);
catch(Exception e)
     e.printStackTrace();
and the condition on the 'count' of QUALF (if = 2 then else)
Thanks,
Regards,
Jamal

Using PI to map IDoc BENEFIT3 to EDI 834

Has any used PI/XI to map IDoc BENEFIT3 to EDI 834? We are looking to use this approach but have had problems finding a standard map. You would think SAP would have one since they stand by their BENEFIT3 IDoc being sufficient to map to the 834. This will take forever to do it from scratch or even without an example. Help please.

Hi
You can do 1:n multimapping
in message mapping in messages tab ..add both the structures in target tab and do the mapping
and in operation mapping add both the message interface on the target side
PLease go through this blog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sending data to Message borker.(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to save file in SAP fold

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.

Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam

Map loader / error loading catalog

Hi there,
i have a problem with the "map loader" and my Nokia 5800 XM.
... the map loader worked as i bought the phone some months ago. Everything worked fine. Today i had to do a reset. The map is still working, but i cant get the map loader to work.
After the start of the program and sync with the 5800 XM im getting an errormsg (in german but im trying to translate).. "cannot load the catalog of the 5800 xm"
Thats it. I googled whole day, but found no solution... so this forum is my last help right now.
It worked (today) before i have done the reset so im thinking that its not my OS (Windows7 64bit).
thx in advance
Murt

one more thing.. i have updated the FW today to the newest available. 50.0.005
found also another thread here /t5/Maps-Navigation-and-GPS/Map-Loader-error-while-loading-catalogue/td-p/624895/page/2
might be an FW problem then?

Mapping IDOC error

Similar Messages

Maybe you are looking for