Mapping Inbound-Outbound IDocs

Hy everybody,
Is there a table in the receiving system where inbound IDocs numbers are linked to outbound IDocs numbers from the sending system ?
Regards,
Christian Baldari

Hi,
there is no link from inbound idoc to outbound idoc.
We will only come to know by looking document flow.
Sales order - Docuemnt flow
Delivery - Docuemtn flow.
You will come to know all the things by looking docuemnt flow.
ramesh

Similar Messages

Recommended Status Codes usage for Inbound & Outbound IDocs

Hi,
Can someone tell what status codes do we use when we go for a Custom Posting Program or Selection Program?
I assume we use 51 for Posting Program (not 56) and
26 for a Z-Selection Program (Not 37 or any other Code).
Please let me know what is recommended and which status codes most of the people use while Custom Development.
Thanks and Regards,
Venkat.

Hi,
Outbound IDOC Status Codes
The following table describes outbound IDOC status codes that generate Tivoli Enterprise Console events:
Outbound IDOCs
Code Error Event Severity SAP Meaning
02 Yes Error Error passing data to port
03 No Error if transaction SM58 indicates an RFC transmission error Data pass to port OK
04 Yes Error Control information of EDI subsystem
05 Yes Error Translation
06 No Harmless Translation
07 Yes Error Syntax check
08 No Harmless Syntax check
09 Yes Error Interchange handling
10 No Harmless Interchange handling
11 Yes Error Dispatch
12, 13, 14 No Harmless OK
15 Yes Warning Interchange acknowledgement negative
16 No Harmless Functional acknowledgement
17 Yes Warning Functional acknowledgement negative
18 No Harmless Triggering EDI subsystem
20 Yes Error Triggering EDI subsystem
22 No Harmless Dispatch OK, acknowledgement still due
23 Yes Error Retransmission
24 No Harmless Control information of EDI subsystem
25 Yes Warning Processing despite syntax error
26 Yes Error Syntax check
27 Yes Error ALE error
29 Yes Error Error in ALE services
30 No Harmless Ready for dispatch (ALE)
31 No Harmless IDOC is marked for deletion
33 No Harmless Original of an IDOC which was edited
34 Yes Error Error in control record of IDOC
36 Yes Error Timeout error; electronic signature not performed
37 Yes Error IDOC added incorrectly
38 No Harmless IDOC archived
39 No Harmless Receive confirmed
40 Yes Error Application document not created in target system
41 No Harmless Application document created in target document
Inbound IDOC Status Codes
The following table describes the inbound IDOC status codes that generate Tivoli Enterprise Console events:
Inbound IDOCs
Code Error Event Severity SAP Meaning
51, 52 Yes Error Posting error
53 No Harmless Posting successful
54 Yes Error Error during formal application check
55 No Harmless Formal application check
56 Yes Error IDOC with error added
60 Yes Error Syntax error
61 Yes Warning Processing despite syntax error
62 No Harmless IDOC passed to application
63 Yes Error Error passing IDOC to application
64 No Harmless IDOC ready to be passed to application
65 Yes Error ALE error
68 No Harmless IDOC is marked for deletion
70 No Harmless Original of an IDOC which was edited
73 No Harmless IDOC archived
Regards,
Raj.

UTP - Test Plans IDOCs - Inbound -Outbound

Hi All,
can some one please provide the samples of standard UTP - Test plans for INBOUND & OUTBOUND IDOC interfaces, if you have such.
Regards,
Sridhar

Hi,
I am also in need of UTP for outbound IDoc.
Please forward me to my id : [email protected]
Your help would be appreciated.
Thanks,
Sangeetha

How to send Outbound IDocs through an RFC-enabled FM

Good day to all;
A partner system (AS/400) wants to use a Java Connection to execute a RFC Function Module, in SAP, that will then return a collection of IDocs.
Currently, the Function Module builds the IDocs, but I'm not exactly sure how to simply send those IDocs back to the AS/400.
If anyone can help in this regard, that would be great.
My current thoughts are to use Master_IDoc_Distribute, but then I imagine that requires a port configuration for the AS/400. And if this is the case, does that mean that SAP will send the IDocs back itself instead of using the RFC interface?

Hi Tavares,
If you want to send outbound IDoc to AS/400 (external system), you need to setup file port (t/code WE21).
For RFC interface, you need to setup RFC file port with RFC Destination (t/code SM59). In this case, SAP will send IDoc (individually or batch) to receiver system (AS/400). Perhaps you need a middleware for data transformation, if AS/400 does not perform data mapping for outbound IDoc.
For FTP interface, you need to setup flat/XML file port for outbound. then you can FTP the file to AS/400 later on.
In addition to file port configuration, you also need to setup partner profile for outbound parameter (t/code WE20) and the distribution model (t/code BD64).
Hope this will help.
Regards,
Ferry Lianto

Outbound Idoc for MB21

Hi,
I suppose to configure the scenario like when we enter the data in MB21 and save it, all the information suppose to go to Non sap system. Since i am totally new to this, can any one suggest me what is the Inbound / outbound idoc function modules i can use to send / receive the data. What is the order type.
Thanks in advance
Jaya

Hi Jaya,
Message type MRESCR and IDoc type MRESCR01 are available in my system 4.7. Please check with transaction WE81 (Message Types) and WE31(IDoc Types).
Also please check this FM.
ALE_RESERVATION_CREATE (Outbound)
IDOC_INPUT_MRESCR (Inbound)
Regards,
Ferry Lianto
Please reward points if helpful.

Creation of Inbound Idoc for the Outbound Idoc in same client

Hi,
My requirement:
Whenver an PO is created an Outbound IDOC is generated in system ABC with client 100.I want to pass this IDOC data to create an Inbound Idoc for Sales Order(SO) in the same client.
It would be helpful if anyone can answer on how to Transfer the Outbound Idoc after it crosses the port.
I found there is a field for function module in WE21,can this be used to get the requirement done.
Please suggest.
Regards,
Amar

Example of a program that create and post an inbound idoc....maybe that will help you:
report zzinbound_idoc.
data: g_idoc_control_record like edi_dc40 occurs 0 with header line.
data: g_edidd like edi_dd40 occurs 0 with header line.
data: g_e1bpache09 like e1bpache09.
parameter: mode type c default 'A'.
refresh: g_idoc_control_record, g_edidd.
clear:   g_idoc_control_record, g_edidd.
*-Build Control Record -*
g_idoc_control_record-mestyp = 'ACC_DOCUMENT'.   "Message type
g_idoc_control_record-idoctyp = 'ACC_DOCUMENT03'. "IDOC type
g_idoc_control_record-direct = '2'.              "Direction
* Receiver
case sy-sysid.
when 'DE2'.
    g_idoc_control_record-rcvpor = 'SAPDE2'.     "Port
    g_idoc_control_record-rcvprn = 'IDOCLEGACY'. "Partner number
endcase.
g_idoc_control_record-rcvprt = 'LS'.             "Partner type
g_idoc_control_record-rcvpfc = ''.               "Partner function
* Sender
g_idoc_control_record-sndpor = 'A000000002'.      "tRFC Port
case sy-sysid.
when 'DE2'.
    g_idoc_control_record-sndprn = 'IDOCLEGACY'. "Partner number
endcase.
g_idoc_control_record-sndprt = 'LS'.             "Partner type
g_idoc_control_record-sndpfc = ''.               "Partner function
g_idoc_control_record-refmes = 'Customer clearing'.
append g_idoc_control_record.
*-Build Idoc Segments -*
*---E1KOMG
clear g_edidd.
clear g_e1bpache09.
g_edidd-segnam               = 'E1BPACHE09'.
g_edidd-segnum               = 1.
move g_e1bpache09 to g_edidd-sdata.
append g_edidd.
*-Create idoc -*
*-Syncronous
if mode = 'S'.
call function 'IDOC_INBOUND_SINGLE'
    exporting
      pi_idoc_control_rec_40              = g_idoc_control_record
*     PI_DO_COMMIT                        = 'X'
*   IMPORTING
*     PE_IDOC_NUMBER                      =
*     PE_ERROR_PRIOR_TO_APPLICATION       =
    tables
      pt_idoc_data_records_40             = g_edidd
    exceptions
      idoc_not_saved                      = 1
      others                              = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*-Asynchronus
else.
call function 'IDOC_INBOUND_ASYNCHRONOUS'
    in background task as separate unit
    tables
      idoc_control_rec_40 = g_idoc_control_record
      idoc_data_rec_40    = g_edidd.
commit work.
endif.
write: / 'Well done!'.

Seeburger inbound/outbound mapping options with AS2 adapter

Hi Gurus,
This is the first time that i am handling Seeburger adapters(AS2 adapter).
We have the following issue.
We are using AS2 adapter from Seeburger for communicating with Partners (inbound/outbound).
For some scenarios, the trading partners either sends us a flat/csv file or expects a flat/csv file from PI.
And for these scenarios, we are using the AS2 adapter (for sender or receiver channel configuration) .
Now, the main issue is that we need to convert the flat file to PI-XML format when we receive a flat file from a trading partner or we need to convert from PI-XML format to flat file format when we are sending file to a trading partner.
Since the AS2 adapter does not have a File Content Conversion (Like we have in the File/FTP adapter) mechanism, we need to rely on MessageTransformBean (under AF Modules) to do the conversion for us. However, since this module cannot handle deep structures (nested structures) what other alternatives can we look out for ?
I know we can also go for BIC Mapper which is shipped from Seeburger for EDI to XML and XML to EDI conversions. However in this project, we just need XML to flat file/CSV or Flat File/CSV to XML conversions and hence we want to abstain from buying a license for BIC mapper.
Please let me know what other options can we try in this case.
Does Seeburger has anything specific to do the conversions from XML to flat file or flat file to XML (and not the whole BIC mapper tool).
Regards, Gaurav.

Does Seeburger has anything specific to do the conversions from XML to flat file or flat file to XML (and not the whole BIC mapper tool).
No. Seeburger doesn't provide any such tool/option.
Please let me know what other options can we try in this case.
As per the detail you have provided, you don't have any standard option left. You have to either develop your own adapter module or you can pass the payload directly to mapping and then perform Java mapping on it. You have option of using Conversion Agent but there must be some license cost for it as well.
Regards,
Prateek

Puprose of inbound and outbound idocs

plz help me
what is inbound and outbound idoc ? its purpose
inbound and outbound idoc steps
thnaks

Hi Mahesh,
Please check this link
what is the need of ALE/ IDOC
what is idoc.
IDOC creation
inbound idoc creation
Best regards,
raam

Degugging Inbound and Outbound idocs

Hi friends,
Can any one help me in debugging Inbound and outbound IDocs?
1.I found the inbound FM using Tcode we19,clicked the inbound FM button and called it in the debugging mode.
While debugging the Inbound FM iam nt able to figure out the actual problem.Is there any way to reach out the exact problem?
2.How to find out the outbound Idoc FM and debug it?
Your help is appreciated.
Thanks in Advance.

Hi,
Inbound or Outbound IDoc processing FM can be found iin partner profiles(WE20).
for Outbound: WE20 --> choose partner type --> Outbound parameters --> choose message type --> Message control Tab --> Double click on Process code to get the FM assigned.
for inbound: WE20 --> choose partner type --> Inbound parameters --> choose message type --> inbound options --> Double click on Process code to get the FM assigned.
For debugging, use Tcode WE15 for outbound, But before that u need to set the output type dispatch time as 1 (Send with periodically scheduled Job). Go to Output type assignment screen --> assign the output type --> choose further processing --> Set Dispatch time as 1 --> Save.
Note: U need to keep the break point in the Outbound FM or exit if any before going to WE15 to debug from that point.
Hope it helps,
SG.

Scheduling inbound and outbound idoc processing

Hi everybody.
I ´d ike to know which is the best way to schecule the outbound and inbound idoc process.
Nowadays we are using this:
INBOUND PROCESSING
- In WE20 the idocs are checked with "Trigger with a background program".
- The program RBDAPP01 is scheduled with a job to trigger the process of the inbound idocs.
OUTBOUND PROCESSING
- The program RBDMIDOC is scheduled to create the idocs than have been created with change pointers.
- The program RSEOUT00 is scheduled with a job to trigger the process of the outbound idocs.
Is there any better option to improve de perfomance????
Edited by: Christian Abad Chico on Nov 13, 2009 10:09 AM

Any answer

Relating outbound idoc to inbound idoc to create a document

We have a requirement to relate the outbound idoc to inbound idoc , transfer the data and create a document.
Kindly let me know the tcode / configuration steps of how can we relate the idocs.
Thanks,
Nalini S.

Hi Juan,
Check the IDOC: WMATGRP01. Hope it will be helpful for you.
BR,
Lokeswari.

Mapping of inbound INVOIC02 iDoc Segment to MIRO/MIR7 Header Text? Help!

Hi Experts,
I need to map a field from the inbound INVOIC02 idoc to the header text field. This field is TABLE:INVFO;(Struct)Field:SGTXT as shown in MIR7. I thought that segments E1EDPT1 & E1EDPT2 would map to this field but it is not showing up in the processed invoice. Is there a segment/field in INVOIC02 that maps to this field?
Thanks,
Doug

Hi,
Try like this
Ledger                        Ledger
       EqualS------------OR            EqualS------------OR EqualS------------OR   EqualS------------OR----Not---
Constant(460050)       Constant(471000)          Constant(420600)       Constant(472150)
and   Brand-------
                EqualS--CreateIF-----Target Brand
Constant(75999)
Thanks!

Trigger an outbound idoc to sender system after inbound idoc has status 53

Hi all,
We have two different partners (say A and B)which send inbound idoc to ECC of same message type WMMBXY. This updates goods movement. The partner A collects the idocs(WE20 partner profile setting) and partner B trigger's immediately. Now our requirement is after successful processing of idocs (satus 53) we need to send another type of idocs to the sender regarding the updation/ changes occured in ECC.
Since partner A collects the idocs how can we check that it reaches 53 status and send the outbound idoc to A.
Kindly help me in solving this issue.
Thanks,
Aravind

Create a new process code WMMB to ZMMB & assign a FM ZL_IDOC_INPUT_WMMBXY
& call the standard FM L_IDOC_INPUT_WMMBXY , check the status or any error other wise create a new IDOC using
Master_IDOC_CREATE, hope the solution works for you

Why does an Inbound IDoc no change and differs from an Outbound IDoc no?

Hi Experts,
This seems to be a basic question..! But can someone kindly clarify why an IDoc number gets changed when sent from one R/3 system to another R/3 system and how does this happen???
i.e., whenever an IDoc was triggered from R/3 system A to R/3 system B through XI/PI, the Inbound IDoc number (in system B) differs from the Outbound IDoc number (in system A)... Why does this happen and how???
Thanks in advance!
Br,
G@nesh

Hi Ganesh,
The IDOC numbers are always Unique,
IDOC can be generated in SAP system as a result of internal testing (WE19), or
can be posted from a non sap system (say PI).
So every time a new IDOC comes, it is assigned a new number to avoid confusion and also this plays a
critical role in the end to end testing and validation.
If you look at the control record of the IDOC you can see a element called DOCNUM. this stores to actual IDOC number.
from PI side you can use IDX5 and in ECC We02/05 to notice the idoc numbers.
Regards,
Srinivas

ALE/Idoc (inbound & outbound)

Hi,
Can any one help me by providing simple sample code for creation of ALE/Idoc (inbound & outbound). Where I need do understand flow cycling of outbound from one client to other inbound client. Waiting for replay. My email-ID is [email protected]
Regards,
Lokesh.K

Hi,
have you seen these documentation sections?
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/78/2174b051ce11d189570000e829fbbd/frameset.htm">Implementing Inbound Processing</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/78/2177bc51ce11d189570000e829fbbd/frameset.htm">Implementing Outbound Processing</a>
Hope they'll help.

Mapping Inbound-Outbound IDocs

Similar Messages

Maybe you are looking for