Mapping Query.. Hardcoding many values to single field.!!

Hi ,
The structure looks like below..
E1EDK14 ..              0..12
        QUALF            0..1
        ORGID ..           0..1     
The values which i need to hardcode are below.
E1EDK14-QUALF    = 006
E1EDK14-ORGID     = 10
E1EDK14-QUALF   = 007
E1EDK14-ORGID    = 12
E1EDK14-QUALF   = 008
E1EDK14-ORGID    = 210  
I need to hardcode the values to the above Idoc fields(QUALF and ORGID).All the above 6 values has to appear in the Idoc structure. (ie. E1EDk14 segment will repeat for 3 times)
I do not know how we can hardcode three values.
Can one pls suggest me how i can acheive it??
Waiting for your answer..!!
Note : There  is no condition as If QUALF = "XX" then ORGID = "YY". My Situation is i need to hardcode evything.
Regards
Deepthi.

Deepthi,
The soln is simple. In the mapping right click on the node E1EDK14 and select "Repeat Node" or "Duplicate node". I forgot the exact menu name.
Once you do this. you can see the node E1EDK14 2 times in target. Now just map 006 to QUALF of 1st E1EDK14 and 007 of 2nd E1EDK14 node. Repeat this till you get the desired result.
P.S: Make sure you map the E1EDK14 nodes with a empty constant.
Regards,
Jai Shankar

Similar Messages

  • How to display 7 values of  single field in row wise.

    hi,
    how to display 7 values of  single field in row wise.
    thankx in advance.

    hi ,
    do it like this :
    1 Place ur UI element in tranparent container with Layout as Row Data and Layout Data as Row Head Data
    2 Ur first  UI , which contains the first value as Row Head Data ,
    3 Others as Row Data
    u can do it with Matrix Data as well
    if u want to give space , u can use HORIZONTAL GUTTER and set its width to medium / large / Xlarge
    also there is a UI element "INVISIBLE ELEMENT" ,
    1 u can use this UI element to provide space between ur other UI elements in the view
    2 u can insert a text element as well , and in the Text property of the element press ALT + 0160.
    u can give the space bw UIs as desired.
    regards,
    amit

  • To populate values into single field in an internal table

    Hi Friends,
    How we need to populate values into single field in an internal table.
    E.g itab consits of single field ( name)
           i need to assign values to this field name .like
          peter,
          john,
          abrahm,
          daneyal
    Pls tell me i how i need to code for this
    Thanks ,
    Parnith

    Hi,
    Please look at the below code :
    DATA : BEGIN OF itab OCCURS 0 ,
             name(20) TYPE c,
           END OF itab.
    START-OF-SELECTION.
      itab-name = 'Peter'.
      APPEND itab.
      CLEAR itab.
      itab-name = 'John'.
      APPEND itab.
      CLEAR itab.
      itab-name = 'Abrahm'.
      APPEND itab.
      CLEAR itab.
      itab-name = 'Daneyal'.
      APPEND itab.
      CLEAR itab.
      LOOP AT itab.
        WRITE : / itab.
      ENDLOOP.
    Thanks,
    Sriram Ponna.

  • Pass Multiple values of single field to ITS url

    Hi ,
    I have one transaction code(YW37P),
    I that have one field(Order No) in the selection screen, which has capable to accept multiple values (i.e multiple single values) and excute the t code.
    Now my question is how to pass this multiple values of one single field to the ITS url and by pass the selection screen.
    I have gone through the blogs which explains about how to pass only one single value of single field to ITS url and by pass the selection screen
    please provide some solution for this
    Regards
    Srinivas

    Hello Srinivas,
    How do you enter multiple order numbers in the field usually?  Is there a space or comma separating the numbers?  If so you will probably need to encode the space or comma, ie if a comma %2C.  The easiest way to figure it out is to use a tool like HTTPwatch and capture the POST data to see the value that is normally sent by the transaction. 
    Edgar

  • Multiple values for single field

    hi
    In order to upload Purchase order details, how you handle multiple values for a single field? 
          Eg: Item field may contain no. of values for a record

    Hi,
    It is generally taken care using BDC's by Table Control, and if you are using BAPI's then there are tables for ITEMS.
    Regards,
    Atish

  • Mapping JDBC lookup: Passing values to multiple fields at target

    Hi all
    i my scenario  i am using mapping JDBC lookup ,and it is working sucessfully.
    but i need to select 4 fields from lookups select query and passing it to 3 different target field at target MT.
    if i use Global container object methods,than only 1 field i can store inglobal container variable..
    and return it 1 the target fields...
    BUT how do i pass 4 fields ,result of the select query to 4 different fields at target MT..
    query :"
    Select BPNO,emp,BENR,bacepack from Ztable where BPNO='"+BPNO[0]+"'";
    Regards
    AjayP

    Hi,
    I have to fetch 3 values and populate it to the 3 fields in the target. The UDF am using is as attached. This UDF is for fetching one value. Kindly tell me about the changes I will have to make to fetch 3 values instead of 1 value.
    String Query = " ";
    Channel channel = null;
    DataBaseAccessor accessor = null;               
    DataBaseResult resultSet = null;                
    // Query to retrieve the PROP value for the particular source value passed.
    Query ="Select PROP from TANKS where ID='" + ID[0] + "' ";
    try{
    //Determine a channel, as created in the Configuration
    channel = LookupService.getChannel("<Business Service>","<Communication Channel>");
    //Get a system accessor for the channel. As the call is being made to an DB, an DatabaseAccessor is obtained.
    accessor = LookupService.getDataBaseAccessor(channel);
    //Execute Query and get the values in resultset
    resultSet = accessor.execute(Query);
    for(Iterator rows = resultSet.getRows();rows.hasNext();){
    Map rowMap = (Map)rows.next();                      
    result.addValue((String)rowMap.get("PROP"));       
    catch(Exception ex){
    result.addValue(ex.getMessage());
    finally{
    try{
    if (accessor!=null) accessor.close();
    catch(Exception e){
    result.addValue(e.getMessage());

  • SQL Join help for multiple values in single field.

    Hello All,
    I need a help, I have two tables T1 and T2
    Content of T2 will be like
    T2. ID | T2.USERNAME
    ID1 | John
    ID2 | Peter
    ID3 | Mark
    Content of T1 is like
    T1.ID
    ID1 ID2 ID3
    ID2
    ID1 ID3
    I need to join these two tables and replace the T1.ID values with T2.USERNAME, for eg. Row one of T1 should be changed as John Peter Mark.
    Note: ID1 ID2 ID3 is a single value.
    Thanks for your help.
    Sathish.

    At Volder: I have made a slight enhancement. It's the same thing but the other way around as last week's regular expression thread. Remember the "and then the bird flew away"? ;-)
    SQL> create table t1
      2  as
      3  select 'ID1 ID2 ID3' id from dual union all
      4  select 'ID2' from dual union all
      5  select 'ID1 ID3' from dual union all
      6  select 'ID11 ID2' from dual
      7  /
    Tabel is aangemaakt.
    SQL> create table t2
      2  as
      3  select 'ID1' id, 'John' username from dual union all
      4  select 'ID2', 'Peter' from dual union all
      5  select 'ID3', 'Mark' from dual union all
      6  select 'ID11', 'Volder' from dual
      7  /
    Tabel is aangemaakt.
    SQL> select * from t1
      2   model
      3    reference r on (select t2.*, rownum rn from t2)
      4     dimension by (rn)
      5     measures(id, username)
      6    main m
      7     dimension by (id)
      8     measures(cast(id as varchar(200)) str)
      9     rules iterate(100) until (r.id[iteration_number+1] is null)
    10      (str[any] = replace(str[CV()], r.id[iteration_number+1],r.username[iteration_number+1]))
    11  /
    ID          STR
    ID1 ID2 ID3 John Peter Mark
    ID2         Peter
    ID1 ID3     John Mark
    ID11 ID2    John1 Peter
    4 rijen zijn geselecteerd.
    SQL> select id
      2       , str
      3    from t1
      4   model
      5         reference r on (select id,username,rownum rn from t2)
      6           dimension by (rn)
      7           measures (id, username)
      8         main m
      9           dimension by (id)
    10           measures (cast(' ' || id || ' ' as varchar2(200)) str)
    11           rules iterate(1000) until (r.id[iteration_number+1] is null)
    12           ( str[any] = replace
    13             ( str[cv()]
    14             , ' ' || r.id[iteration_number+1] || ' '
    15             , ' ' || r.username[iteration_number+1] || ' '
    16             )
    17           )
    18  /
    ID          STR
    ID1 ID2 ID3  John Peter Mark
    ID2          Peter
    ID1 ID3      John Mark
    ID11 ID2     Volder Peter
    4 rijen zijn geselecteerd.At Sathish: just look at the queries we have to come up with to do such a simple thing. As said many times before, I would also encourage you to change the design instead of executing the queries presented by Volder and me.
    Regards,
    Rob.
    Message was edited by:
    Rob van Wijk
    Just noticed I missed a final TRIM function around "str", so please add this.

  • Excel cells appear garbled; either multiple values in single field or problem with redrawing of the cells.

    In editing a simple, new Excel 2013 file, I am seeing certain cells with multiple, overlapping values in the a single cell.  This is in the A-column so, not a matter of margins.  Specificially, in one cell, I had "Design", then replaced
    that text with "Reqt".  Now I see the word "Reqt" written over "Design".  when trying to delete the values, I can remove the "Reqt" value, but the "Design" value will not disappear/delete.
    I've tried saving and reopenning the file with no effect; problem persists.  Makes me think this is a corrupted .xlsx file, even though I just started from scratch 15 minutes before the problem arose.
    I appreciate any guidance (or bug submission) you can support.
    V/R,
    Kevin

    I have successfully inserted seven records in one form submit operation by looping through the command object execute method.
    However, the data that is being inserted by the command object is repetition of the first record and the command object is not taking any data from the text boxes for the second record onwards. In this I had used the isert record behavious generated by DW CS4 and modified it to suit my requirement. However, the data inserted in the first row is getting repeated in all the seven rows.
    Please help.
    Also advise if there are any free dreamweaver server side validation extensions available.

  • Copy Multi block field value in single field

    HI!
    I have a multi block text item i want to copy its contents in single filed text item.
    1. I am using Forms 6i.
    Thanks & Regards!

    Hi,
    Try this code.
    DECLARE
         Str_Field                VARCHAR2(3000);
         Num_Total_Records NUMBER;
         Num_Loop_I                     NUMBER;
    BEGIN
         :<master_block_name>.<field_name> := '';
         FIRST_RECORD;
         LAST_RECORD;
         Num_Total_Records := TO_NUMBER(NAME_IN('SYSTEM.CURSOR_RECORD'));
         FIRST_RECORD;
         FOR Num_Loop_I IN 1..Num_Total_Records LOOP
              Str_Field := Str_Field || ',' || :<detail_block_name>.<field_name>;
              NEXT_RECORD;
         END LOOP;
         :<master_block_name>.<field_name> := SUBSTR(Str_Field, 2, LENGTH(Str_Field)-1);
    END;Regards,
    Manu.

  • FCC-Mapping all content in a single field

    Hi all,
    I have a requirement to map all the content in the textfiles to the single tag of xml .Do any one know how to configure this in Communication channel.  I referred SAP help docs but all for mapping it with by separter or by fixed length etc.. I want to map all the contents in a single field.
    Laks

    try to add trace to messages and see what is happening.
    try to put
    trace.addInfo(outputPayload);
    after
    outputPayload =
                "<?xml version=\"1.0\" encoding=\"UTF-8\"?>"
                   + StartXMLTag
                   + strXML
                   + EndXMLTag;
    See in the trace if your file content is visible.
    The only way to troubleshoot java mapping is by adding traces at various places and checking the flow.

  • Single Field Identity & Auto-Increment

    I was wondering if I could use single field identity and auto-increment
    together? I've tried it, my code compiles and enhances ok, but it throws
    and exception when I tried to run a unit test.

    We have many users using single field identity and auto-increment together.

  • Multiple values in where clause(IN) of select query in Cisco Cloud Portal using single field

    I can actually pass multiple values in the IN statement of select query using multiple dictionary fields in the data retrieval rule of the AFC in Cisco cloud portal like
    #dictionary.field1# = 1 and
    #dictionary.field2#=2
    select col1,col2 from table1 where col3 in (#dictionary.field1#,dictionary.field2#).
    but I want to pass mutiple values in a single field as
    #dictionary.field1#=1,2
    select col1,col2 from table1 where col3 in (#dictionary.field1#) and the query gives no data because it is taking as '1,2' instead of '1','2'.
    Please give the solution for passing multiple values in a single variable to use in IN operator of WHERE clause

    Ok, I now understand what you are trying to do. Unfortunately, you cannot inject parts of a SQL statement into a DDR through a dictionary field, which always represents a specific value (the comma in your case is attempting injection of a SQL construct to refer to multiple values). One possible solution is to arbitrarily consolidate your list of values using a delimiter that you know will not be in the values themselves such as a colon (:). Let's use 3 values as it serves as a better example.
    Set your dictionary field to a single reference to all 3 values of interest, say 'a', 'b', 'c' as:
    :a:b:c:  (you can use javascript to create this consolidated dictionary field)
    Now your query would look something like the following:
    select col1,col2 from table1 where #dictionary.field1t# like '%:'+col3+':%'
    This should achieve the desired result.

  • Send Multiple field values to Single Target field in Message Mapping

    Hi,
    My  Requirement is to Map Multiple fields to Single field in Target side.I have to send all the values concatenated and pass the same to target Field in Message Mapping.
    We can use Concat function,but more that 15 fields are there.If using concat,the mapping will be complex.
    Is there any way to simplify this requirement or we can use any UDF for this,kindly suggest.
    Regards,
    Madhu

    >>>We can use Concat function,but more that 15 fields are there.If using concat,the mapping will be complex.
    I don't think it's complex but  just that it occupies more mapping area
    Just write a simple UDF - a one line code and pass all your input variables.
    return var1+var2+var3+var4+...+var15;

  • Display values of a single field in a multiple rows in a table region

    Hi Tech-Gurus,
    I want to display values of a single field ( which is in a table region) in multiple rows and also need to restrict the values from decimal number. If i click save, then it will throw exception "Decimal not allowed".
    xxxxxx
    yyyyyy
    Reg.No
    1234
    5678
    7654
    I need to display the values of REG.NO in different rows like,
    1234
    5678
    7654
    and also need to validate as well against Decimal values.
    Please help me with the code how i will iterate ?

    Hi,
    I am assuming you are talking about displaying substrings from the Reg No in different rows. For this you would need to write a query which identifies the substrings and creates a separate row for each (ensure you choose values for all other columns in the table row). Kindly let me know if the understanding is incorrect.
    To validate against decimal value you can use the java code by checking the difference of the number and the number on which modulus has been applied. Hope that helps.
    Regards
    Sumit

  • XML Unbounded values into one field - Message Mapping

    Dear All,
    I am trying to convert an unbounded multifield XML structure to a 0.1 field so that the maltiple values are mapped into a single fields in semi-colon seperated fasion.
    The source:
    <MT_dates>
       <date>05-10-2011</date>
       <date>10-11-2011</date>
       <date>10-12-2011</date>
       <date>10-13-2011</date>
    </MT_dates>
    date field is 0.. unbounded
    target
    <MT_dates>
       <dates>05,10,2011;10,11,2011;10,12,2011;10,13,2011</date>
    </MT_dates>
    dates field is 0 .. 1
    can anybody please help?
    Regards,
    Haik

    chk this:
    input will be : var1
    execution type All values of a context
    int a = var1.length;
    String b="";
    for(int i=0;i<a;i++)
    b =b +var1<i> + ";";
    int c=b.length();
    String output =b.substring(0,c-1) 
    result.addValue(output);
    date-UDF--dates

Maybe you are looking for