Marshal Exception raised when using an union type
Hi,
I am using jdk1.4.0 and I am experiencing a problem when using union types. I was wondering if anyone would have experienced the same problem ? Or would have any idea of a possible workaround ?
Here is the code :
=========
module X208 {
typedef string AE_form1Type;
typedef long AE_form2Type;
enum AETypeChoice { form1Choice, form2Choice };
union AEType
switch(AETypeChoice) {
case form1Choice:
AE_form1Type form1;
case form2Choice:
AE_form2Type form2;
module HelloApp {
interface Hello
string sayHello(in any param);
=========
My code, in the client, looks like this :
AEType ae = new AEType();
ae.form2(14);
Any many = orb.create_any();
AETypeHelper.insert(many, ae);
string Hello = helloImpl.sayHello(many);
I have noticed that, each time I send an AEType form1 (a String) in the Any, it works fine. But when I try send an AEType form2, it fails with a Marshal exception (see below).
I tried to switch form1 and form2 (actually their types : string and integer) to see if the problem was linked to the integer, but it failed the same on form2.
When checking the bug database, there is one bug which might be close to this, but it's supposed to be fixed now (#4518206).
Did someone experience the same problem ? Am I doing something wrong here ?
Thanks for your help !
ERROR : org.omg.CORBA.MARSHAL: underflow called with grow strategy vmcid: SUN minor code: 202 completed: No
org.omg.CORBA.MARSHAL: underflow called with grow strategy vmcid: SUN minor code: 202 completed: No
at com.sun.corba.se.internal.iiop.BufferManagerReadGrow.underflow(BufferManagerReadGrow.java:25)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_1.grow(CDRInputStream_1_1.java:73)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_2.alignAndCheck(CDRInputStream_1_2.java:28)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.read_octet_array(CDRInputStream_1_0.java:567)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.getConvertedChars(CDRInputStream_1_0.java:2285)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.internalReadString(CDRInputStream_1_0.java:469)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.readStringOrIndirection(CDRInputStream_1_0.java:460)
at com.sun.corba.se.internal.iiop.CDRInputStream_1_0.read_string(CDRInputStream_1_0.java:520)
at com.sun.corba.se.internal.iiop.CDRInputStream.read_string(CDRInputStream.java:197)
at com.sun.corba.se.internal.corba.TypeCodeImpl.copy(TypeCodeImpl.java:2430)
at com.sun.corba.se.internal.corba.TypeCodeImpl.copy(TypeCodeImpl.java:2679)
at com.sun.corba.se.internal.corba.TypeCodeImpl.copy(TypeCodeImpl.java:2632)
at com.sun.corba.se.internal.corba.AnyImpl.write_value(AnyImpl.java:581)
at com.sun.corba.se.internal.iiop.CDROutputStream_1_0.write_any(CDROutputStream_1_0.java:534)
at com.sun.corba.se.internal.iiop.CDROutputStream.write_any(CDROutputStream.java:235)
at HelloApp._HelloStub.sayHello(_HelloStub.java:19)
at HelloClient.main(HelloClient.java:37)
I have similar problem. Except that mine throws a null exception write after com.sun.corba.se.internal.corba.AnyImpl.write_value(AnyImpl.java:581).
do you have a workaround?
Similar Messages
-
Is JBO exception working when using JPA ?
I am using Jdeveloper 11g R (11.1.2.3) & weblogic 10 G
In my pages I use JSF & Facelet
Is JBO exception working when using JPA as data provider?
I mean can I throw JBO exception from my back end in some business cases?
thanks
MohsenYou haven't added a resource reference for your web application that gives the application a local name for the global resource "UserDatabase".
-
Hi All,
Can some please help me to get out of this HAL error .
I was facing the below error from HAL routine .
In bound routine failed at 3/12/2009. Exception raised: com.oberon.runtime.OverflowException: Type Mismatch: Overflow
Thanks in advance
Edited by: Hyp on Dec 30, 2009 3:44 PMI am not sure this will help in any way, but type mismatch and overflow mean the following:
Overflow: Too many characters. In other words the process could have expected "+" but instead was "something, something, something, dark side"
Type mismatch: seen quite often in relational databases, and VBA (also java) where you are expecting a 'number' and instead receive a 'string'. so for example it expected 123456, and received "Account 123456" or something along those lines. -
Exception report when using tomcat 5 with JDBC
i followed this guide to setup the JDBC with my TOMCAT 5
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/jndi-datasource-examples-howto.html#Database%20Connection%20Pool%20(DBCP)%20Configurations
but i seem to get this error
exception
javax.servlet.ServletException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null'"
org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:846)
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:779)
org.apache.jsp.SID.test_jsp._jspService(test_jsp.java:81)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null'"
org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:276)
org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:159)
org.apache.jsp.SID.test_jsp._jspx_meth_sql_query_0(test_jsp.java:100)
org.apache.jsp.SID.test_jsp._jspService(test_jsp.java:58)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
i can compile *.java and run them when they need the jdbc drivers to interact with mysql 5 database.
This is my server.xml
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<!-- Comment these entries out to disable JMX MBeans support -->
<!-- You may also configure custom components (e.g. Valves/Realms) by
including your own mbean-descriptor file(s), and setting the
"descriptors" attribute to point to a ';' seperated list of paths
(in the ClassLoader sense) of files to add to the default list.
e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
-->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
<Connector port="8080"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
debug="0" connectionTimeout="20000"
disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" debug="0" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" debug="0"
protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false"
acceptCount="100" debug="0" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
<Engine name="Standalone" defaultHost="localhost" debug="0" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost" debug="0">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
debug = the debug level, higher means more output
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code:
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn"
debug="0"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Logger shared by all Contexts related to this virtual host. By
default (when using FileLogger), log files are created in the "logs"
directory relative to $CATALINA_HOME. If you wish, you can specify
a different directory with the "directory" attribute. Specify either a
relative (to $CATALINA_HOME) or absolute path to the desired
directory.-->
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Context path="/testdb" docBase="APACHE_DIR/htdocs/testdb"
debug="5" reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_DBTest_log." suffix=".txt"
timestamp="true"/>
<Resource name="jdbc/TestDB"
auth="Container"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/TestDB">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>
<!-- Maximum number of dB connections in pool. Make sure you
configure your mysqld max_connections large enough to handle
all of your db connections. Set to 0 for no limit.
-->
<parameter>
<name>maxActive</name>
<value>10</value>
</parameter>
<!-- Maximum number of idle dB connections to retain in pool.
Set to 0 for no limit.
-->
<parameter>
<name>maxIdle</name>
<value>5</value>
</parameter>
<!-- Maximum time to wait for a dB connection to become available
in ms, in this example 10 seconds. An Exception is thrown if
this timeout is exceeded. Set to -1 to wait indefinitely.
-->
<parameter>
<name>maxWait</name>
<value>10000</value>
</parameter>
<!-- MySQL dB username and password for dB connections -->
<parameter>
<name>username</name>
<value>test</value>
</parameter>
<parameter>
<name>password</name>
<value>testpwd</value>
</parameter>
<!-- Class name for mm.mysql JDBC driver -->
<parameter>
<name>driverClassName</name>
<value>com.mysql.jdbc.Driver</value>
</parameter>
<!-- The JDBC connection url for connecting to your MySQL dB.
The autoReconnect=true argument to the url makes sure that the
mm.mysql JDBC Driver will automatically reconnect if mysqld closed the
connection. mysqld by default closes idle connections after 8 hours.
-->
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost/testdb?autoReconnect=true</value>
</parameter>
</ResourceParams>
</Context>
</Host>
</Engine>
</Service>
</Server>You haven't added a resource reference for your web application that gives the application a local name for the global resource "UserDatabase".
-
Error when using RTF as type of web report
When I use RTF as type of web report ,the program will exceptionly terminate with exceptoin.When I use html,Pdf format,it work well.Who can help,Thanks in advance.
It seems your browser is not properly configured to handle RTF content. You can try to load a local RTF directly into your browser and see if that works.
-
Business Transaction Profile - Error when using Z-Transaction Type
Dear Experts,
we are using SAP CRM 7.0 (Support Level 0007 - SAPKU70007). I have created a Z-Business Transaction Profile Z_IC_SERVICE.
SAP Help says:
Enter the transaction type to be used as a default in your scenario in the IC WebClient. For example, choose the transaction type 0010 (Interaction Record) if an interaction record is to be created automatically. The system creates this interaction record automatically after the interaction has started (for example, after accepting a call). During this, the activity clipboard in the interaction record is filled with the relevant data.
So when I am using the transaction type 0010 (Interaction Record) in my Business Transaction Profile all is OK that means I can search for accounts and I can confirm them to go on with the process.
BUT: When I entering here a Z Transaction Type (Z000) the systems shows the errors:
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event InteractionStarted.
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event BPConfirmed.
Then I have made a copy of the transaction type 0010 (Name of copy: Z010) and tried to use it in my Business Transaction Profile the system says:
Customizing settings missing. Assign partner functions to Z010
Anybody know what to do and where to avoid errors? Note 1346892 is obsolete in this case because we already have the highest Support Package Level.
Best Regards
OliverHi yes you were right. In the case of both transaction type I have corrected the customizing parameters in
SPRO -> Customer Relationship Management -> Interaction Center WebClient -> Business Transaction -> Assign Partner Functions to Business Transactions
In the case of Transaction Type Z010 I had Z-Partner Functions and and that leaded to the errors:
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event InteractionStarted.
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event BPConfirmed.
In case of the Transaction TYPE Z000 I forgot to assign the Partner Functions that is why this error appeared:
Customizing settings missing. Assign partner functions to Z010
Thread Closed -
Confused by the change in logical IO when using a UNION
Hi,
we were discussing tuning strategies (using SQL*Plus and autotrace) and stumbled over a strange behaviour.
When I do a straight select I get the following output:
SQL> select * from orders where id > 600000;
100000 rows selected.
Execution Plan
Plan hash value: 1275100350
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 99585 | 2236K| 436 (14)| 00:00:07 |
|* 1 | TABLE ACCESS FULL| ORDERS | 99585 | 2236K| 436 (14)| 00:00:07 |
Predicate Information (identified by operation id):
1 - filter("ID">600000)
Statistics
0 recursive calls
0 db block gets
9473 consistent gets
0 physical reads
0 redo size
3353061 bytes sent via SQL*Net to client
73711 bytes received via SQL*Net from client
6668 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
100000 rows processed
SQL>which is more or less what I expected. Now the strange thing comes when I change the statement to
select * from orders where id > 600000 and id < 630000
union
select * from orders where id >= 630000;which selects the same set of data. Of course the execution plan changes for this query, but what really puzzles me is the huge different for logical IO (consistent gets)
SQL> select * from orders where id > 600000 and id < 630000 union select * from orders where id >= 630000;
100000 rows selected.
Execution Plan
Plan hash value: 2377290594
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 99587 | 2236K| | 1242 (71)| 00:00:19 |
| 1 | SORT UNIQUE | | 99587 | 2236K| 7088K| 1242 (71)| 00:00:19 |
| 2 | UNION-ALL | | | | | | |
| 3 | TABLE ACCESS BY INDEX ROWID| ORDERS | 29914 | 671K| | 184 (3)| 00:00:03 |
|* 4 | INDEX RANGE SCAN | PK_ORDERS | 29914 | | | 61 (4)| 00:00:01 |
| 5 | TABLE ACCESS BY INDEX ROWID| ORDERS | 69673 | 1564K| | 424 (3)| 00:00:07 |
|* 6 | INDEX RANGE SCAN | PK_ORDERS | 69673 | | | 139 (4)| 00:00:03 |
Predicate Information (identified by operation id):
4 - access("ID">600000 AND "ID"<630000)
6 - access("ID">=630000)
Statistics
0 recursive calls
0 db block gets
594 consistent gets
0 physical reads
0 redo size
3353061 bytes sent via SQL*Net to client
73711 bytes received via SQL*Net from client
6668 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
100000 rows processed
SQL>Even though the same number of rows is selected, and the same number of bytes are sent to the client, why is the number of logical IOs so much lower?
When I change the UNION to a UNION ALL the consistent gets go way up (13893) which I don't understand as well (the execution plan is basically the same, just missing the SORT UNIQUE node)
Can anyone shed some light on this? Especially why the UNION needs substantially less IO
I would have expected it to use more IO due to the duplicate index range scan. More like the figures I get when using UNION ALL
This is on a developer machine. Windows XP, Oracle 10.2.0.1.0
Thanks in advance
ThomasThanks for the answer.
Yes, the statistics are up-to-date.
Yes I have noticed the full table scan, but when I change the condition for the first select in order to reduce the number of rows so that an index range scan makes sense, the figures are more or less the same:
SQL> select * from orders where id > 630000;
70000 rows selected.
Execution Plan
Plan hash value: 1270478249
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 69672 | 1564K| 424 (3)| 00:00:07 |
| 1 | TABLE ACCESS BY INDEX ROWID| ORDERS | 69672 | 1564K| 424 (3)| 00:00:07 |
|* 2 | INDEX RANGE SCAN | PK_ORDERS | 69672 | | 139 (4)| 00:00:03 |
Predicate Information (identified by operation id):
2 - access("ID">630000)
Statistics
0 recursive calls
0 db block gets
9724 consistent gets
0 physical reads
0 redo size
2627301 bytes sent via SQL*Net to client
51711 bytes received via SQL*Net from client
4668 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
70000 rows processedWhen I change the condition for the union to only retrieve 70000 rows as well, I get figures comparable to my very first example:
SQL> select * from orders where id > 630000 and id < 650000 union select * from orders where id >= 650000;
70000 rows selected.
Execution Plan
Plan hash value: 2377290594
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 69673 | 1564K| | 871 (73)| 00:00:13 |
| 1 | SORT UNIQUE | | 69673 | 1564K| 4977K| 871 (73)| 00:00:13 |
| 2 | UNION-ALL | | | | | | |
| 3 | TABLE ACCESS BY INDEX ROWID| ORDERS | 19943 | 447K| | 123 (3)| 00:00:02 |
|* 4 | INDEX RANGE SCAN | PK_ORDERS | 19943 | | | 42 (5)| 00:00:01 |
| 5 | TABLE ACCESS BY INDEX ROWID| ORDERS | 49730 | 1116K| | 303 (3)| 00:00:05 |
|* 6 | INDEX RANGE SCAN | PK_ORDERS | 49730 | | | 100 (4)| 00:00:02 |
Predicate Information (identified by operation id):
4 - access("ID">630000 AND "ID"<650000)
6 - access("ID">=650000)
Statistics
1 recursive calls
0 db block gets
418 consistent gets
0 physical reads
0 redo size
2347358 bytes sent via SQL*Net to client
51711 bytes received via SQL*Net from client
4668 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
70000 rows processed -
Unsatisfied Link Error when using Oracle OCI (Type II) driver
Using Oracle OCI (Type II) driver on HPUX with Oracle 9.2.0.4.
If when creating a connection pool via the console, using the Oracle OCI (Type
II) driver, you get the error "Unsatisfied link error with library libocijdbc9.sl
or format error" then check that the library included in the SHLIB_PATH is pointing
at the $ORACLE_HOME/lib32 directory and not just the $ORACL_HOME/libWe do not offer a JDBC driver for Linux in version 5.1. In version 6.0,we
do offer a type 4 driver for Linux.
In version 5.1, I suggest trying the platform independent type 4 JDBC driver
available for free from Oracle. It is supported (as is any JDBC driver)
with WebLogic Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Michael W. Warren, Sr." <[email protected]> wrote in message
news:[email protected]..
I have installed WebLogic 6.0 on Solaris platform and verified that the
server comes up
and that I can connect to it via Netscape. Next step was to verify
installation of WebLogic
jDriver for Oracle. When I run the following:
java utils.dbping ORACLE scott tiger
I get the following error:
Starting Loading jDriver/Oracle .....
Error encountered:
java.sql.SQLException: System.loadLibrary threw
java.lang.UnsatisfiedLinkError
with the message
'/ldatae/bea/wlserver6.0/lib/solaris/oci816_8/libweblogicoci37.so:
ld.so.1: /ldatae/bea/jdk130/jre/bin/../bin/sparc/native_threads/java:
fatal: libgen.so.1: open failed: No such file or directory'.
at
weblogic.jdbcbase.oci.Driver.loadLibraryIfNeeded(Driver.java:202)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:57)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:182)
Anyone seen this? Help!!!
Thanks in advance
Mike Warren, Sr.
[email protected] -
Error when using 557 movement type to remove stocks from intransit
Dear All,
We have some stocks left in intrasit where we use only inventory management to do this stock transfer(ie. we are not using STO),now we want to remove this stock from intransit. When i tried to use movment type 557 I got an error (Deficit of PL Stock in transit 10 DZ : CHS10088 2KUR 0000000867) with message number M7021. I cross this material with mb52 to find the avalability of this intransit stock and found that it is available at given plant but with out a batch number. When I tried to use this movement type it asks for a batch number so i have given an available batch number. Can you please help me to remove this stock from intransit.
Thanks & Best Regards,
ChameendriHi
the movement types 557 ( and 558 ) can only be used to update intra-company
transit stock which is saved in MARC-TRAME. IF you are using purchase
orders cross-company stock transfers, the transit stock is only a virtual transit stock what is calculated
based on the purchase order history. So this issue cannot be addressed
by changing the data in a stock table.
Are you using intra-company STO ?
Please check carefully note 392205 that contains the report ZTRAME
.Please see the following information:
A report attached to the note 392205 tries to explain the stock in
transit using the documents existing in the system. First verify the
current stock in transit situation using the report ZTRAME as per the
note 392205. This program tries to 're-calculate' the stock in transit
based on the material documents and the purchase order history.
Based on the results of the program the movement-types 557 and 558 can
be used to correct the stock in transit (-> add or book out stock in
transit).
I hope this can be of help
BR
Nadia Orlandi -
History Attributes when using Custom Authentication Type
assigned all History Attributes (in the Entity Object Editor) to my audit columns.
During run time, I find only Created By is assigned the SYSDATE, and Created On, Modified On, and Modified By are null.
I am using Custom Authentication Type.
I have read that the History Attributes only work the the JAAS authentication type. Appreciate any one confirming this.
Also, how do you implement History Attributes if you are using the Custom Authentication Type? Do you need to write Java code?
Thanks.
JohnHi,
confirmed it only works with container managed authentication performed through JAZN. You can't use this with custom security as otherwise this feature could be overwritten. Still you can provide your own implementation:
- create a custom table
- use the setAttr method on the RowImpl class of a VO to store the username
Frank -
Exception CNTL_ERROR raised when using REUSE_ALV_GRID_DISPLAY
Hi,
I would like to ask your help concerning the following issue. I have a program called ZBAL_ZSTOCK2 which uses the following FM :
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_interface_check = 'X'
i_buffer_active = space
i_callback_program = g_program
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
it_sort = gt_sort[]
i_save = 'A'
is_variant = gs_variant
it_events = gt_events[]
is_print = gs_print
IMPORTING
e_exit_caused_by_caller = g_exit_caused_by_caller
es_exit_caused_by_user = gs_exit_caused_by_user
TABLES
t_outtab = it_alv[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
It works fine when I run it in foreground.
This program is called from another program, using the statement:
SUBMIT zbal_zstock2
USING SELECTION-SET varianta
WITH SELECTION-TABLE rspar
EXPORTING LIST TO MEMORY AND RETURN.
In this last case, the program ZBAL_ZSTOC2 short dumps during of execution of FM - 'REUSE_ALV_GRID_DISPLAY', method SET_VISIBLE, with following explanation:
Error analysis
A RAISE statement in the program "CL_GUI_CONTROL================CP" raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
The line where the error is raised into method SET_VISIBLE is:
16 * check handle
17 IF ME->H_CONTROL IS INITIAL.
>>>> RAISE CNTL_ERROR.
19 ENDIF.
Do you have any idea how to avoid this short dump?
I appreciate any suggestion.
Thank you in advance,
MYou cannot use ALV GRID in background. You need to go for ALV LIST Function Module.
PLease search with ALV GRID BACKGROUND in the search field of SCN. You will get lot many posts related to this and solutions are given.
regards,
Padma -
ALV OOPs: exception raised when SET_DATA method of CL_SALV_TABLE is used
Hi,
Scenario:
Result set is displayed in 2 ALV grids by using 2 different instances. I am using the methods of class CL_SALV_TABLE.
If the data is changed, I fetch the new data set and by using the method 'set_data'.
TRY.
instance_1->set_data(
CHANGING t_table = table1
instance_2->set_data(
CHANGING t_table = table2
CATCH cx_salv_no_new_data_allowed.
ENDTRY.
Issue:
The problem is that it raises the exception 'cx_salv_no_new_data_allowed' and thereby does not display the changed data.
I have tried to debug, and I found that in the 'set_data' method
if me->r_controller->is_new_data_allowed( ) eq if_salv_c_bool_sap=>false.
raise exception type cx_salv_no_new_data_allowed.
endif.
is executed and it returns the value 'false'.
This is because in the 'is_new_data_allowed', it checks
if r_adapter->function_call_active eq abap_true.
value = abap_false.
endif.
Can you please suggest how can i set the 'r_adapter->function_call_active' to abap_false .
Regards
s@kUnusually, CL_SALV_TABLE has quite good doco - in there the "set_data" method has the comments:
Caution:
You are not able to call these methods in an event handler. If you
do you will get an error.
Exceptions
o CX_SALV_NO_NEW_DATA_ALLOWED
You have called SET_DATA in an event handler.
I think you should be calling the "refresh" method instead - have a look at SAP's sample report SALV_DEMO_TABLE_REFRESH.
Jonathan -
ORABPEL-10585 exception raised when starting the admin server
Greetings,
Have installed Oracle SOA Suite 11gR1 with WebLogic 10.3. Starting the admin application server raises the following exception:
<Mar 30, 2012 5:30:33 PM CEST> <Error> <oracle.bpm.services.organization> <BEA-000000> <Exception
exception.70692.type: error
exception.70692.severity: 2
exception.70692.name: Error while granting BPMOrganizationAdmin role to SOAOperator.
exception.70692.description: Error occured while granting the application role BPMOrganizationAdmin to application role SOAOperator.
exception.70692.fix: In the policy store, please add SOAOperator role as a member of BPMOrganizationAdmin role, if it is not already present.
ORABPEL-10585
Service error.
Internal Error; Service error occurs in JpsProvider in method getIdentityStore().
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.tip.pc.services.identity.jps.JpsProvider.getIdentityStore(JpsProvider.java:379)
at oracle.tip.pc.services.identity.jps.JpsProvider.init(JpsProvider.java:352)
at oracle.tip.pc.services.identity.jps.JpsProvider.<init>(JpsProvider.java:316)
at oracle.tip.pc.services.identity.jps.JpsProvider.getInstance(JpsProvider.java:328)
at oracle.bpm.bpmn.engine.runtime.DeploymentDescriptorUtil.grantBPMOrganizationAdminRoleToSOAOperator(DeploymentDescriptorUtil.java:292)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.stateChanged(BPMNServiceEngine.java:578)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.notifyListeners(FabricLifecycle.java:46)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.setState(FabricLifecycle.java:29)
at oracle.integration.platform.blocks.mesh.MeshImpl.postDeployInit(MeshImpl.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy294.postDeployInit(Unknown Source)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:555)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store.
at oracle.security.jps.internal.idstore.util.IdentityStoreUtil.getIdentityStoreFactory(IdentityStoreUtil.java:168)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmFactory(AbstractIdmIdentityStore.java:174)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.initStore(AbstractIdmIdentityStore.java:124)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmStore(AbstractIdmIdentityStore.java:110)
at oracle.tip.pc.services.identity.jps.JpsProvider.getIdentityStore(JpsProvider.java:377)
at oracle.tip.pc.services.identity.jps.JpsProvider.init(JpsProvider.java:352)
at oracle.tip.pc.services.identity.jps.JpsProvider.<init>(JpsProvider.java:316)
at oracle.tip.pc.services.identity.jps.JpsProvider.getInstance(JpsProvider.java:328)
at oracle.bpm.bpmn.engine.runtime.DeploymentDescriptorUtil.grantBPMOrganizationAdminRoleToSOAOperator(DeploymentDescriptorUtil.java:292)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.stateChanged(BPMNServiceEngine.java:578)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.notifyListeners(FabricLifecycle.java:46)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.setState(FabricLifecycle.java:29)
at oracle.integration.platform.blocks.mesh.MeshImpl.postDeployInit(MeshImpl.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy294.postDeployInit(Unknown Source)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:555)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
<Mar 30, 2012 5:30:33 PM CEST> <Error> <oracle.bpm.common> <BEA-000000> <Exception
BPM-70692
Exception
exception.70692.type: error
exception.70692.severity: 2
exception.70692.name: Error while granting BPMOrganizationAdmin role to SOAOperator.
exception.70692.description: Error occured while granting the application role BPMOrganizationAdmin to application role SOAOperator.
exception.70692.fix: In the policy store, please add SOAOperator role as a member of BPMOrganizationAdmin role, if it is not already present.
at oracle.bpm.bpmn.engine.runtime.DeploymentDescriptorUtil.grantBPMOrganizationAdminRoleToSOAOperator(DeploymentDescriptorUtil.java:324)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.stateChanged(BPMNServiceEngine.java:578)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.notifyListeners(FabricLifecycle.java:46)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.setState(FabricLifecycle.java:29)
at oracle.integration.platform.blocks.mesh.MeshImpl.postDeployInit(MeshImpl.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy294.postDeployInit(Unknown Source)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:555)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused By: ORABPEL-10585
Service error.
Internal Error; Service error occurs in JpsProvider in method getIdentityStore().
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.tip.pc.services.identity.jps.JpsProvider.getIdentityStore(JpsProvider.java:379)
at oracle.tip.pc.services.identity.jps.JpsProvider.init(JpsProvider.java:352)
at oracle.tip.pc.services.identity.jps.JpsProvider.<init>(JpsProvider.java:316)
at oracle.tip.pc.services.identity.jps.JpsProvider.getInstance(JpsProvider.java:328)
at oracle.bpm.bpmn.engine.runtime.DeploymentDescriptorUtil.grantBPMOrganizationAdminRoleToSOAOperator(DeploymentDescriptorUtil.java:292)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.stateChanged(BPMNServiceEngine.java:578)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.notifyListeners(FabricLifecycle.java:46)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.setState(FabricLifecycle.java:29)
at oracle.integration.platform.blocks.mesh.MeshImpl.postDeployInit(MeshImpl.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy294.postDeployInit(Unknown Source)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:555)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store.
at oracle.security.jps.internal.idstore.util.IdentityStoreUtil.getIdentityStoreFactory(IdentityStoreUtil.java:168)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmFactory(AbstractIdmIdentityStore.java:174)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.initStore(AbstractIdmIdentityStore.java:124)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmStore(AbstractIdmIdentityStore.java:110)
at oracle.tip.pc.services.identity.jps.JpsProvider.getIdentityStore(JpsProvider.java:377)
at oracle.tip.pc.services.identity.jps.JpsProvider.init(JpsProvider.java:352)
at oracle.tip.pc.services.identity.jps.JpsProvider.<init>(JpsProvider.java:316)
at oracle.tip.pc.services.identity.jps.JpsProvider.getInstance(JpsProvider.java:328)
at oracle.bpm.bpmn.engine.runtime.DeploymentDescriptorUtil.grantBPMOrganizationAdminRoleToSOAOperator(DeploymentDescriptorUtil.java:292)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.stateChanged(BPMNServiceEngine.java:578)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.notifyListeners(FabricLifecycle.java:46)
at oracle.integration.platform.blocks.mesh.FabricLifecycle.setState(FabricLifecycle.java:29)
at oracle.integration.platform.blocks.mesh.MeshImpl.postDeployInit(MeshImpl.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy294.postDeployInit(Unknown Source)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:555)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
I noticed it has something to do with security so I need to mention I modified the boot.properties file such that to have the same credentials used upon the domain creation.
Many thanks in advance for your help.
Kind regards,
Nicolasscanzano,
I was wondering if you ever received and answer to this question, becuase I am faced with the same problem when I attempt a signon to the 'admin server' I receive the following message:
type Status report
message Invalid direct reference to form login page
description The request sent by the client was syntactically incorrect (Invalid direct reference to form login page).
This is displayed as an "HTTP Status 400 - Invalid direct reference to form login page!!??" It appears that this message has been around for a while so I'm wondering if this issue will ever get resolved?? -
Problem with gui_download when using DBF FILE type.
Good Day Experts.
I am trying to download excel file using function module GUI_DOWNLOAD.
declared a table it_string type table string.
initially I appending my header to it_string. and then passing my internal table to it .
this is how I am passing data into it_string.
so in gui_download I am passing parameters as below. but I am not getting data into the excel file.
I tried both ways passing field separator as 'X' and '#'.
please guide me where I am wrong.Hello Surendra,
Can you please upload your code sample. Thanks.
What i manage to find is using this function module WS_DOWNLOAD.
The file is downloaded in the directory --> C:/
Here is the code sample :
TABLES: usr03,dd02l.
DATA: zx030l LIKE x030l.
DATA BEGIN OF zdfies OCCURS 0.
INCLUDE STRUCTURE dfies.
DATA END OF zdfies.
DATA: BEGIN OF flditab OCCURS 0,
fldname(11) TYPE c,
END OF flditab.
DATA itabusr03 LIKE usr03 OCCURS 0 WITH HEADER LINE.
DATA tname LIKE dd02l-tabname.
SELECT * FROM usr03 INTO TABLE itabusr03.
tname = 'USR03'.
PERFORM getfieleds.
PERFORM dwdbffile.
FORM getfieleds.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
langu = sy-langu
only = space
tabname = tname
withtext = 'X'
IMPORTING
header = zx030l
TABLES
fieldtab = zdfies
EXCEPTIONS
internal_error = 01
no_texts_found = 02
table_has_no_fields = 03
table_not_activ = 04.
CASE sy-subrc.
WHEN 0.
LOOP AT zdfies.
flditab-fldname = zdfies-fieldname.
APPEND flditab.
ENDLOOP.
WHEN OTHERS.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-subrc.
ENDCASE.
ENDFORM. "GETFIELEDS
FORM dwdbffile.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
* filename = 'C:\USR03.DBF'
filename = 'C:\USR03.XLS'
filetype = 'DBF'
TABLES
data_tab = itabusr03
fieldnames = flditab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "DWDBFFILE
Thanks and Kind Regards,
Yovish. -
Error when using record group type as param in a function in where clause
Hi folks.
I have a record type defined in a packages specification. I have to use this record as parameter to call a function. I am able to call the function if as return its value to a string variable. However, the function should be called into a query to compare the returned value and this code is not compiled.
The code is below:
DECLARE
l_line_group_rec INL_CUSTOM_PUB.inl_ship_headers_rec;
l_name VARCHAR2(100);
l_count NUMBER;
BEGIN
l_name := INL_GET_PARTY_SITE_NAME(l_line_group_rec); -- Compiling successfully
SELECT COUNT(1)
INTO l_count
FROM dual
WHERE INL_GET_PARTY_SITE_NAME(l_line_group_rec) = 'Allied Manufacturing'; --- Error when compiling
END;
I got the error: PLS-00306: wrong number or types of arguments in call to 'INL_GET_PARTY_SITE_NAME'
I would like to know if there is any restriction in using record type as parameter in where clauses or if there is another way to do it.
Thanks in advanceHi.
The definition of INL_GET_PARTY_SITE_NAME:
FUNCTION INL_GET_PARTY_SITE_NAME(p_line_group_rec INL_CUSTOM_PUB.inl_ship_headers_rec) RETURN VARCHAR2 IS
l_party_site_name VARCHAR2(100);
BEGIN
l_party_site_name := 'Allied Manufacturing';
URN l_party_site_name;
END INL_GET_PARTY_SITE_NAME;
Thanks.
Maybe you are looking for
-
When my ipod nano gen 6 is plugged into itunes, it shows there are songs present. When disconnected, NO songs show up on nano. I've restored and updated the software. HELP? PS - Called Apple and they won't help unless I pay $29.95!
-
Solaris 10 resource controls - /etc/system vs /etc/projects
Can someone please explain to me why, if we set the set the max shared memory segment in the /etc/system file using 'set shmsys:shminfo_shmmax=4294967296' we are seeing 800GB instead of 4GB when running 'prctl -n project.max-shm-memory': /etc/system:
-
Using BW statistics to replicate count found on earlywatch reports.
The following table shows the relevant performance indicators in various system areas. Area Indicators Value Trend System Performance Active Users 26 Avg. Response Time in Dialog Task 515 ms Max. Dialog Steps per Hour 1413 Avg. Response Time at Peak
-
Help about weblogic 6.1
after i start weblogic 6.1 sp5(at hpux 11.0) several days,i'll get this error message:<Critical> <WebLogicServer> <Failed to listen on port 7001, failure count: 1, failing for 0 seconds, java.net.SocketException: Too many open files> .then i have to
-
IPhone SDK 3 NavController push/pop animated difference (in simulator)?
Ok, I have a NavController that supports Portrait and Landscape orientations. If I push a ViewController in Portrait and then go "back" the built-in animation is wipe left, then wipe right when going back. In Landscape in 2.2.1 it worked the same way