Mask w/ TextField???

I have a mask, if I put anything beneath it, OTHER than a
TextField, the graphic is visible.
If I put a TextField beneath the mask, the TextField doesn't
show up? wtf?

My knowledge is that when a star shows next to the type it is
because it comes from a shared library. Try using a font that is
not from a shared library and see if that helps. I've never done a
mask with type from a shared library, though you'd think they work
the same.
Are you doing mask with layers or AS?

Similar Messages

Currency format masking

Is it possible to Mask a textfield numeric entry into locale specific currency
mormat.
I have tried it with <netui:formatNumber> tag ,but it is not giving the right
result.
Say if i enter 123457678 in a textfield ,it has to be formatted in UK format i.e,1,23,45,678
How can it be done

I think you will need to do the formatting in javascript. The formatNumber
tag does not support the varying number of digits between commas. The
formatString handles arbitrary string formats but it works left to right and
so it isn't good for numbers.
"Mr.Federal" <[email protected]> wrote in message
news:[email protected]...
>
ok
is it possible to format a number as follows
1,23,45,67,890.89
"John Rohrlich" <[email protected]> wrote:
The problem is that the double has been formatted into a String of the
form
$12.34 and this is POSTed back into a double type.Without unformatting
the $
off the currency, this won't convert into a Java double type. That's
why
type conversion is failing. Unfortunately there is no support to unformat
this string before POSTing back.
- john
"Mr.Federal" <[email protected]> wrote in message
news:[email protected]...
Thanks john,
Can i format a textfield entry using
<netui:formatNumber country="GB" type="currency" language="en"/>
I have tried it,but while submitting the page ,it displays the
following
error
[]: NetUI Warning: Unable to update expression"{pageFlow.bsImpl.balanceSheet[0][26].amount}".
The typical cause is that the object represented by the expressionis not
available
or is the wrong type for updating. Cause:com.bea.wlw.netui.script.ExpressionUpdateException:
Exception when attempting to update the expression"{pageFlow.bsImpl.balanceSheet[0][26].amount}"
with available binding contexts [actionForm, pageFlow, globalApp].Root
cause:
com.bea.wlw.netui.script.IllegalExpressionException: The type "double"can
not
be set through XScript.
could u help me to figure it out ?
"John Rohrlich" <[email protected]> wrote:
Here is how you can get a UK format for currency but I'm not sure
if
that is
the problem you are trying to solve. Let me know.
<netui:label value="12345678">
<netui:formatNumber country="GB" type="currency"language="en"/>
</netui:label>
Here is the result
£12,345,678.00
- john
"Mr.Federal" <[email protected]> wrote in message
news:[email protected]...
Is it possible to Mask a textfield numeric entry into locale
specific
currency
mormat.
I have tried it with <netui:formatNumber> tag ,but it is not givingthe
right
result.
Say if i enter 123457678 in a textfield ,it has to be formatted
in
UK
format i.e,1,23,45,678
How can it be done

Date picker's session state

Hi,
I have problems with date picker. There is a tabular form with several columns and one of them is Date. I have chosen a date picker instead of textfield so that user can choose a date easier. When user clicks Submit button, validation runs. My validation gives error message on Error Page. When user clicks 'OK' link on Error Page browser should go back to previous page without refreshing it so that there are still invalid values in form's fields entered by user before validation. But when I use Date picker the tabular form is being refreshed and all the input is lost. When I use textfield for Date column everything works fine - user clicks an 'OK' link on Error Page and he/she is taken to previous page where invalid data is still there in form.
Is it possible to save a session state of a Date picker using Error Page? If not, is it possible to implement a mask for textfield in Date column so that when user writes the date he/she can see the format he/she should use?
Regards,
Tom

Hi Phil,
The problem is that it does not matter what the date format is set. The problem seems to be that date picker just exists in form! It seems that if there is a date picker in tabular form then the page always refreshes, it cannot be restored with javascript (history go -1).
So is it possible to save date pickers session state or to solve this problem in any other way?
Regards,
Tom

Crash on Tweening a TextField with a mask AS3 CS3

I have yet to hunt down exactly what it is about this
situation that makes it crash, but when I tween the position of a
TextField that has a mask, as soon as I close the movie window the
program crashes, whether it be in the Flash (CS3) IDE or in a
browser.
In detail: I have a movie where I'm creating 1000 instances
of a movieclip (little dots) and when the mouse rolls over one i
instantiate another movieclip, call it box. I then dynamically
create a textfield inside the box and give it a mask (a generated
sprite that is just a rectangle half the width of the box, which is
added to the box's display list). Finally, I tween the x position
of the TextField, giving the effect of the text sliding out from
the edge of the box. When I test the movie in Flash this works fine
but as soon as I close the window Flash crashes, in a browser
window when I close the window I get the spinning beach ball of
death. If I dont add a mask to the TextField, I dont have this
problem at all. I will test this on a PC tomorrow, but as of yet
can only confirm on a Mac.
Has anyone ever encountered something like this?
I dont have the code in front of me, but it is really what
youd imagine, along the lines of (NOTE: this is not my exact
code):

I have the same problem in version CS6. I assume Adobe hasn't done anything about it?

[svn:fx-trunk] 13076: It turns out that embedded fonts don' t clip when you shrink the height of a TextField so we' ll use masks in that case

Revision: 13076
Revision: 13076
Author:   [email protected]
Date:     2009-12-17 14:12:18 -0800 (Thu, 17 Dec 2009)
Log Message:
It turns out that embedded fonts don't clip when you shrink the height of a TextField so we'll use masks in that case
QE Notes: None
Doc Notes: None
Bugs: SDK-24561
Reviewer: Corey
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/components/DataGrid
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24561
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Creating a textfield with mask.

I want to create a textfield that can enter string value, number and date.. Only one texfield that when I choose a date it will become a date picker and be able to save in the database?

The last time I did this I put each glossary term on its own (much smaller) page, then created a link to return to previous view that covered the entire page so no matter where they clicked they would go back to where they came from. Or you could create a button that jumps to previous view. Of course this only works when each glossary term is linked just once. If the same term is used on different pages you link them all to the glossary but the link on the glossary page will only return to the first instance.

HELP in Masking TextField!!!

If a text field Datatype is DateTime
and masking to HH24:MI:SS,
then how i assign a default value(any time)
to the text field by hard coded.
TQ
From
Kent
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Franko Lioe ([email protected]):
Dear Kent,
Have you tried to put into yout Text Property called "DEFAULT VALUE" with this value : $$DATE$$ ?
If not, You can try to put "$$DATE$$" into Default Value of your text field property.
Hope this help.
Regards,
Franko Lioe<HR></BLOCKQUOTE>
Thank's Q Franko Lioe for you idea :-)
null

Conversion from date to number & display a date in a textfield

I Have 2 issues
The first one:
I need to extract the hour from a date variable.
This is the code I already have:
NUM_TOT := NUM_TEL + to_number('PROGRAMMINGS1.PRG_START','hh24');
NUM_TOT & NUM_TEL are number variables,
PROGRAMMINGS1.PRG_START is a Textfiel with a dateformat. There can only be an houre like 24:59:00 entered.
So in this example I just want the houre and convert it to a number.
The second:
I want to make a date from a few numbers & then display it in a texfield.
This is the code I already have:
VAR_DATE := NUM_TEL || ':' || NUM_LENGTH || ':00';
:PROGRAMMINGS.PRG_END := to_date(VAR_DATE,'hh24:mi:ss');
Between the 2 lines of code i places a message(VAR_DATE) for testing.
When the program display VAR_DATE then i can see the good date at the bottom of the screen.
But when I place my variable in the textfield it looks like: 00:00:00. What am I doing wrong?
Who can help me.
With regards
Stefanie

Verdi wrote:
Problem: During the conversion (both implicit and explicit conversion with a format mask) I lose the "00" hours and "00" minutes and receive something like this: "10-JAN-13 *12*.00.00.000000000 AM".I don't think you are necessarily losing any information whatsoever. It's probably more of a function of your NLS_TIMESTAMP_FORMAT and NLS_DATE_FORMAT. For example your NLS_DATE_FORMAT could be setup by default for a HH24 (24 hour time) which would report midnight as "00" hours. However, it looks like your NLS_TIMESTAMP_FORMAT is setup with a "HH" format with a meridian indicator which means 12 hours time.
Your comparisons should be using date/timestamp data types anyways so as long as the input value is converted properly into a date type this shouldn't matter anyways.
You can see what is actually stored by using the DUMP function:
SQL> SELECT DUMP(TO_TIMESTAMP(TO_CHAR(TRUNC(SYSDATE,'DD'),'MM/DD/YYYY HH:MI:SS AM'))) AS TSTAMP
2 ,       DUMP(TRUNC(SYSDATE,'DD')) AS DT
3 FROM DUAL
4 /
TSTAMP                                                                      DT
Typ=187 Len=20: 218,7,1,13,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0                  Typ=13 Len=8: 218,7,1,13,0,0,0,0As you can see the TSTAMP and DT store nearly the same values (218,7,1,13), but the TSTAMP has more precision because of fractional seconds.
HTH!
Edited by: Centinul on Jan 13, 2010 7:23 AM

HELP! TextField "NUMERIC" dont let me enter more than 9 digits

Hi there,
Firstly: I 've search for this question, and I ve found an old post very similar to it.
(here is it: [http://forums.sun.com/thread.jspa?messageID=10706126] )
But, unfortunately, the aswerings did not satisfy me...
The problem is:
I have a TextField that should receive a Credit Card number, meaning, it has to have 15 or 16 numbers.
If I set it as "NUMERIC", when I run the app on my real cellphone (a SonyEricsson w810i), it dont let me enter more than 9 digits. Stringe thing here is: but on emulator, I could...
txtCardNo = new TextField("Card Number", null, 16, TextField.NUMERIC);Instead, if I set it as "ANY", user can type up to 16 numbers, but the problem is that field will accept ANY character, and I dont want that way: I want that this field input acts accepting only numbers.
How could I fix it?
Shall I use a function to mask this field? If yes, how?
Or this could be a problem of JVM implementation on this particular cell phone?
Please, send me any examples and/or links.
Thanks very much.
=Marcello=
PS1: I am quite newbie on Java things...
PS2: I am working on this using NetBeans 6.5.1 and Sun Java(TM) Wireless Toolkit 2.5.2 for CLDC

Yuo can set an ItemStateListener to the Form containing the TextField, and validate the user input in itemStateChanged(...). In case of invalid input, I would show an Alert with an appropriate message, and blank out the content of the TextField (or set it to a default value, as appropriate).
db

To fix the length of a textfield for user to enter date

hi,
i need to display a textfield for user to enter the date in the format MM/DD/YY.With the slash in between present and fixed and the possibility of entering only 2 digit figures for the month,day n' year.I am using JTextField .how can i acheive that pls help.

You must design you own document where you will manage the text that will be entered/displayed in your textfield
here's a sample of the code I use to do this:
import javax.swing.JTextField;
import java.io.*;
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import java.awt.event.*;
public class MaskedTextField extends JTextField
private String initStr;
public MaskedTextField (String mask, String initStr)
super();
setDocument(new MaskedDocument(initStr, mask, this));
setText(initStr);
this.initStr = initStr;
this.addMouseListener(new java.awt.event.MouseAdapter()
public void mouseClicked(MouseEvent m)
this_mouseClicked(m);
private void this_mouseClicked(MouseEvent m)
if (getText().equals(initStr)) setCaretPosition(0);
class MaskedDocument extends PlainDocument
String mask;
String initStr;
JTextField tf;
public MaskedDocument(String initStr, String mask,
MaskedTextField container)
this.mask = mask;
this.initStr = initStr;
tf = container;
void replace(int offset, char ch, AttributeSet a)
throws BadLocationException
super.remove(offset,1);
if (capitalised) super.insertString(offset,
String.valueOf(ch).toUpperCase(),a);
else super.insertString(offset, "" + ch, a);
public void remove(int offs, int len) throws BadLocationException
if (len==0)
return;
// Remove current contents
super.remove(offs, len);
// Replace the removed part by init string
super.insertString(offs,initStr.substring(offs,offs+len),
getAttributeContext().getEmptySet());
tf.setCaretPosition(offs);
public void insertString(int offset, String str, AttributeSet a)
throws BadLocationException
if ((offset==0) && str.equals(initStr))
// Initialisation of text field
super.insertString(offset,str,a);
return;
if (str.length()==0)
super.insertString(offset,str,a);
return;
for (int i=0;i<str.length();i++)
while ((offset+i) < mask.length())
if (mask.charAt(offset+i)=='-')
// Skip fixed parts
offset++;
else
// Check if character is allowed according to mask
if (str.charAt(i) != this.initStr.charAt(i))
switch (mask.charAt(offset+i))
case 'D': // Only digitis allowed
if (!Character.isDigit(str.charAt(i)))
return;
break;
case 'C': // Only alphabetic characters allowed
if (!Character.isLetter(str.charAt(i)))
return;
break;
case 'A': // Only letters or digits characters allowed
if (!Character.isLetterOrDigit(str.charAt(i)))
return;
break;
replace(offset+i, str.charAt(i),a);
break;
else
i++;
offset--;
// Skip over "fixed" characters
offset += str.length();
while ((offset<mask.length()) && (mask.charAt(offset)=='-'))
offset++;
if (offset<mask.length())
tf.setCaretPosition(offset);
if (offset == mask.length()) tf.setCaretPosition(offset);
Enjoy
Bernie

AS fails to identify an image placed in html text via an img tag in a TextArea, while doing so correctly with textField.

A best-efforts session with identifying, in ActionScript, an
image placed in a TextArea and identified with id, leads me to
wonder whether the id attribute is supported.
I have on disk a jpeg file of the amazom.com logo, a small
image.
In a scene, I have a TextArea with instance name
TextAreaPane, and a Dynamic textField with instance name
DynamicPane. Both of the html attributes in their properties panes
are set to true. There is a button onstage with instance name
"ShowIt".
If my script reads:
copyToShow = 'This is one place to see it: <img
src="D:/Imgs/amazon.jpg" id="nineties"><br>'
TextAreaPane.text = copyToShow;
DynamicPane.htmlText = copyToShow;
ShowIt.onPress = function( )
trace ("Via TextArea, I can identify: " +
TextAreaPane.nineties);
trace ("Via the textField, I can identify: " +
DynamicPane.nineties);
After the movie loads both in the Player and in the Windows
Projector, the image and text show correctly in both text panes.
When I hit the button, I get:
Via TextArea, I can identify: undefined
Via the textField, I can identify:
_level0.DynamicPane.nineties
Hitting the button after the scene starts playing allows the
very short asynchronous access time to elapse, so this isn't a case
of loading a textfield in one line of script, and then in the next
line expecting for ActionScript to have access to it.
Of course for the Projector I send these statements to a
textField on stage to see what trace gives me, and they're the
same.
I tried placing the two fields inside a movie clip (and
adding that movie clip instance name to the head of their dot
addresses), wondering if being a sub-object of a movie clip would
help, but the same results -- the textField handles it, while
TextArea doesn't.
... Does anyone have a means of getting better results?

Tim,
Many thanks for the clue and the amendments -- once I had
finished a late night of it, a cleanup chore unearthed a magazine
that's had me engrossed for a day and a half and produced the
appearance of ignoring your replies; actually the computers have
been off.
I won't be back to it for another few hours at least, but
wanted to acknowledge the support; the hints in your message look
like they'll be the beginning of another day at it; I'll send word
when there's some kind of results.
I sent the same message to Adobe in their LiveDocs section, a
forum where they variously now tolerate people saying 'How d'ya do
this', 'How d'ya do
that', then now reply that that isn't the right forum for
how-to's, but rather for documentation problems. Well, since the
intro to TextArea says that it supports all the html that Flash
does, I added in the message that the inability to do the
dot-addressing-image-access that they explain under id is a
discrepancy, so qualifies to post even if they're in their
rule-adhering mood, but it hasn't appeared yet -- either under
review or discarded.
The reason I'd chosen TextArea was that the text column will
sometimes be long, and it would be nice to get the overage out of
sight by having a window that shows only the window's worth, hiding
what's above and below. (As you probably know, since attempting to
cover text in a dynamic field with a mask causes all of it to
disappear, that isn't an option.) The other night I felt I'd hit an
impassable wall with Flash; in resigning myself to use the Dynamic
Text field, I decided to cover the text overage with a translucent
screen of color, and be it due to having no choice that it may, the
desaturated stretches of text above and below would add ornament
and atmosphere to the screen, a faintly techno note. Since there
will often two to four of these scrolling fields going, an
intricate, happenstance pattern would develop that might turn out
to be nice.
But if the avenue you've opened starts working, I'll have my
choice between the two objects.
Quantainne

Newbie question - Auto enter into textfield via SQL

I am not even sure what to put for the subject!!
I have a page that creates a new record in our leave tracking database.
The users are logging in via LDAP
The username is also in my employee table and can be used with a where statement
where "USERNAME" like :APP_USER
I want to bring in FIRSTNAME and LASTNAME and automatically put them in the form so the user does not have to.
I tried making the TEXTFIELD source a SQL query and I can get the data to load. When the record is submitted the data is not inserted into the new record it is blank.
The only way I can get the data to load is if the field source is set to Database Column.
My next efforts were to try and get the default value to be inserted via a SQL statement but as there is no option for SQL only it appears that I have to put in a PL/SQL Function body or expression.
I know that there needs to be a Declare then Begin and End but I do not know the syntax for what should be a reasonable simple query.
the sql for the records is
select "FIRSTNAME"
from "NWOCASTAFF"
where "USERNAME" like :APP_USER
the field I am trying to insert this default value is
P2_FIRST_NAME
it is a Text Field
I hope that someone can help me with this.
A small PS
If I wanted the text that is inserted to be Title Case how would I do that, with a format mask or is there some function like upper() which I can use.
thanks
John MP

Scott
Thanks for the code, it works perfectly! The field must be set to display as a textfield but other than that it is exactly what I need.
there is another thread that goes down the computation route
Query to set item default value
I may pursue that route if I find the default value SQL query to be too restrictive.

Apex 4.2: Date picker & format mask number

Hello
In Apex 4.2, in a Date Item, how can I modify the date picker to set Monday as the start of week day? I can set Monday as the start of week day on a calendar, but not in a Date Item.
In a Number Item, there's no format mask to set the comma char as a decimal separator and the dot char as a thousand separator. How can I create a new format mask number?
Thank you.
Edited by: user7034195 on 12-mar-2013 3:24

for the Date Item, you can check this link, you have to call the process on the page load
http://stackoverflow.com/questions/1313317/set-start-day-of-the-week-in-jquery-ui-datepicker
and for the Number format, there's a little trick involved, will try to explain
First of all convert you items from Number field to simple Textfield.
1. Write this in your items Post Calculation Computation: TO_CHAR (:item_name, '999G999G999G999G990D00', 'NLS_NUMERIC_CHARACTERS = '',.''')This will do the number formatting you want, but in oracle above format is not acceptable, so while submitting the above values to database we need to undo the changes for that you can use the below code.
2. Create a Computation "After Submit" for every item you did the above formatting and copy this code in it: replace(replace('1.00.00,00','.',''),',','.') for the 2nd step you can create a package/function which will get the items value as string and do the conversion as number using above code and return back the number.
This should help you.
Regards,
Tauceef

Custom event mask

I have defined a custom new event:
private class MyEvent extends AWTEvent {
          public MyEvent(Object source, String msg) {
               super(source, 2000);
               this.msg = msg;
          public String getMsg() {
               return msg;
          private String msg;
     }as you can see the id is 2000 which is bigger than AWTEvent.RESERVED_ID_MAX
Now in the constructor of my JFrame: CustomEventListener
I've added the following code:
Toolkit.getDefaultToolkit().addAWTEventListener(
                    this, 2000);I want to be able that when I call "disptachEvent" with my event the method
"eventDispatched" will be called in my code, but I don't understand
what value should I set the mask in the addAWTEventListener method.
And in general I don't understand how the correlation between masks
to events work, is there some formula that if the event's id is x then
the mask should be some multiple of x or something like that?
Here is my full application:
import java.awt.AWTEvent;
import java.awt.EventQueue;
import java.awt.FlowLayout;
import java.awt.Toolkit;
import java.awt.event.AWTEventListener;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
public class CustomEventListener extends JFrame implements
AWTEventListener, ActionListener {
      * @param args
     public static void main(String[] args) {
          JFrame myFrame = new CustomEventListener();
          myFrame.setVisible(true);
          myFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     public CustomEventListener() {
          setLayout(new FlowLayout());
          btn = new JButton("Click me");
          add(btn);
          textField = new JTextField(10);
          add(textField);
          pack();
                // what value should I use for the mask
          Toolkit.getDefaultToolkit().addAWTEventListener(
                    this, 2000);
     public void eventDispatched(AWTEvent event) {
          System.out.println("boga boga");
     public void actionPerformed(ActionEvent e) {
          if (e.getSource() == btn) {
               dispatchEvent(new MyEvent(this, "the button has been clicked"));
     private JButton btn;
     private JTextField textField;
     private class MyEvent extends AWTEvent {
          public MyEvent(Object source, String msg) {
               super(source, 2000);
               this.msg = msg;
          public String getMsg() {
               return msg;
          private String msg;
}I know that I can use listeners in this example, but I don't
want to use a listener for the dispatching of my event for reasons
which are a bit hard to explain.
Thanks in advance

Hi,
First say ur Jdev Version................
U can validate in ADF in both Model and ViewLayer itself... In ViewLayer u can have Validators as regular Expression Validators
Have a look into these first....
http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_validateRegExp.html
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31973/af_validate.htm#ADFUI827
Regards,
Suganth.G

Simulate password masking in a XUL dialog's textbox

Due to a Flash bug in CS5 & CS5.5, I've been forced to generate a dialog with straight XUL instead of XUL opening a swf. I'm trying to stylize the textbox textfield to mask the password entered and I'm having issues coming up with a solution for this. It seems the most straight-forward way to mask would be to assign the textfield a strange font which would serve this purpose - like WingDings. However, i'm not sure of the correct way to stylize a textbox via CSS. I'd like to be able to have the CSS inline in the XUL's XML file, similar to how you can have inline script:
<style type="text/css">
          .passMask {
                    font-family:WingDings;
</style>
Am I on the right track or can anyone give me insight on how I might go about accomplishing a password mask in a textbox?
Thanks in advance!

http://dl.dropbox.com/u/27779953/test.mxp
I've set up a test windowSWF - this will show up as a panel when you open Flash after installing this. Simply double-click it on a machine where the CS suite is installed - extension manager will open and install it. Then open Flash (if it was already open, re-open it). Open the test panel in Windows > Other Panels > test. Once open, you'll notice that it will have one button in the panel called "Launch" - press it. Notice the resulting dialog that shows up - this dialog will contain three textfields to input data. If you're on a Mac on CS5 or CS5.5, notice that you can't type the letter "a" more than once. This is the bug I'm referring to. If you're on a PC, you won't exhibit this behavior.
To get around this bug, I took the swf dialog out of the equation and built the dialog strictly in XML2UI / XUL - xml below. The problem is, I can't mask the password textbox. I can't do an "onchange" on this textfield because if I replace what the user is typing, the textbox registers that replacement as a change = infinite loop. Flash crashes immediately. The only thing I can think of is to change / stylize the font for just that textbox to something strange like WingDings, so when a user is typing, they can at least keep track of how many characters they are typing but not the actual characters they've typed.
<?xml version="1.0" ?>
<dialog id="settings" title="Server Login" buttons="accept,cancel">
          <grid>
          <columns>
                    <column />
                    <column />
          </columns>
                    <rows>
                              <row>
                                        <label value="Username" />
                                        <textbox id="username" value="" tabIndex="1" width="200" />
                              </row>
                              <row>
                                        <label value="Password" />
                                        
                                        <textbox id="pass" value="" html="true" tabIndex="2" width="200" />
                              </row>
                              <row>
                                        <label value="Server Domain " />
                                        <textbox id="serverAddy" value="" tabIndex="3" width="200" />
                              </row>
                    </rows>
                    <separator/>
          </grid>
</dialog>
Message was edited by: mythprod2004 - took out the onchange="init()" since that function doesn't exist in this test file

Mask w/ TextField???

Similar Messages

Maybe you are looking for