Mass maint for material master
Dear All
can any one tell me how can i change profit center of material master without removing existing stock?
as on today i am getting error, that stock exists...
i am tried thru MM17 but unable to do it. plz help my to resolve this issue..
rgds
sumit
Hi dear,
This can be done by yet another method.Following steps to be followed.
1) Issue all stock first to a cost center with 201 movement,
2) Change the profit center, then get the material back with 202 movement.
You need to make MM335 message an error message in OMT4 to allow a change only if there is no stock
If you dont follow this way, then you create inconsistencies in profit center accounting.
Because...you received your stock without profit center (actually it is a certain default profit center), if you then change the PC in your material, then each issue will be posted to the new PC, while it never had a receipt.
Similar Messages
-
Problem with mass IDoc for Material Master
Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
PoojaHello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge. -
Mass change for material master data
Dear all,
Previously my company had marked some storage location for MRP indicator to exclude the storage location stock from MRP run.
Now I need to reactive back those storage location, where should I go?
I know a way which can active back material by material (tcode: MM02), but that is too slow for me, because I need to active back around hundrreds of materials.
Anyone know where can I modify the storage location indicator and active back it? I had test MM17, MASS, LSMW.. but it seems like not supported for SAP version 4.0B.
Hope will get reply soon, this issue was quite urgent.
Thanks!
Best Regards,
PCDear Peai,
check with this steps SPRO - SAP Reference IMG - Production - Material
Requirement Planning - Planning - Define Storage location MRP per plant - Enter
the plant - Check for which Storage locations has got the indicator 1 - Storage
Location stock excluded from MRP - Now remove that or choose the values.
Check with & revert.
Regards
Mangal -
Mass changes of Material Master field with different values
Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu KumarHi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul. -
Could sap do mass craete/update for material master classification?
Hi Expert,
Now we craeted new classifcaiton for material master. It need be assigned to related many parts. May I query Could sap do mass craete/update for material master classification? How to do this ?
Thanks
AliceHi,
Another option is using LSMW, please refer to below thread for more details:
Classification view in MM01 with LSMW
cheers, -
Mass updating of material master
Hi,
can any one plz tell me the process of mass updation of material master charecteristics such as classification name, classification type,charecteristics name, charecteristics value for the given materials.
give me some brief overview so that i can proceed on that.
I have to use either BAPI or IDOC only.
Thanks & Regards
NageswarHi Eswar,
Please check with BAPI_OBJCL_CREATE_KEY. There are no of threads available on same topic. lease check for the available information in SCN.I will suggest you post this in Data transfers forum.
Same thread
mass updating of material master
which was blocked by moderator Thomas and posted the same again
Regards,
Madhu.
Edited by: madhurao123 on Nov 2, 2011 11:43 AM
Edited by: madhurao123 on Nov 2, 2011 11:45 AM
Edited by: madhurao123 on Nov 2, 2011 11:47 AM -
BAPI for Material master update
Hello,
I need to upload and change data to the classification screen of Material master (MM01/02). I am thinking of using BAPI_CHARACT_CREATE and BAPI_CHARACT_CHANGE. Can we use BAPI_MATERIAL_SAVEDATA to upload and change characteristic data for material master(MM01/02)?
Can anybody provide me some sample code for mass upload and mass change of characteristic data to material master?
Thanks in advance
Rajesh.Hi Rajesh,
You can use standard SAP program <b>RCCLBI03</b> to do mass upload.
Please check the program documentation for more information.
Also you can take a look this BAPI/FM.
<b>BAPI_OBJCL_CREATE
BAPI_OBJCL_CHANGE
CLVF_INSERT_AUSP
CLVF_UPDATE_AUSP
CLVF_VB_INSERT_CLASSIFICATION</b>
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Most use ful t code for Material Master changing
Dear All,
Can any one give me most useful T-codes for create, change and display material master.
I have one T-code which is very useful for material master it is "MM50". With help of this tcode you can see material extend detail and also you can delete mass material with help of this tcode.
So please use it and also give me other this type of tcodes.
Regards,
Mahesh WaghHi,
MM17, LSMW, MM50 --- These are the 3 main transactions which is used frequently to Mass change the Material master.
There is one more option is there using BDC Upload.
Batch Data Communication or BDC is a batch interfacing technique that SAP developed. It is mainly used for uploading data into the SAP R/3 system. BDC works by simulating the user input from transactional screen via an ABAP program.
The data input data file will come in the form of a flat file which the user save as file type txt file or prn file from the Microsoft Excel program. An Abaper will create a program to read the text file and upload into the SAP system.
Transaction -- SHDB will be used to record the change material master. After, the simulation, the Abaper can generate a sample program and modify from there. It makes the programming easier and faster.
For a BDC upload you need to write a program which created BDC sessions.
hope you got it. Take a help of ABAPer for this BDC Upload.
rgds
Chidanand -
MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS
Dear Experts,
Is there any separate t code available to MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
I got this POINT from ECC 6.0 features in Solution browser.
Please help me on this.
MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
Functionality Enhancements
Provides a specific transaction for mass maintenance of material related excise duties fields
Business Benefits
Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
Regards
Soundar.GDear Ravi,
I have already created LSMW for this in Material master and J1ID.
But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
Regards
Soundar.G -
MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS - T CODE
Dear Experts,
Is there any separate t code available to MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
I got this POINT from ECC 6.0 features in Solution browser.
Please help me on this.
MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
Functionality Enhancements
Provides a specific transaction for mass maintenance of material related excise duties fields
Business Benefits
Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
Regards
Soundar.GDear Ravi,
I have already created LSMW for this in Material master and J1ID.
But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
Regards
Soundar.G -
Mass update on Material Master
Hi MM experts,
How can I "mass update" a large number of material to avoid a lot of manual work?
Specifically updating/changing Commodity code / Import code number for foreign trade.
thanks!
Warm regards,
JumpHi,
Please try using T code MM17 to carry out mass change to material master record.
Regards
ram -
User Exit or BADI for Material master
When save in MM1 or MM02, we need a user exit or Badi to <u><b>get ECM data</b></u> (which is saved in AENR or AEOI table). Please help for this.
Hi Krishna,
Enhancement/ Business Add-in Description
Enhancement
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Business Add-in
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_GTIN_VARIANT
BADI_EAN_SYSTEMATIC
o.of Exits: 3
o.of BADis: 11
These ar ethe avilable exits and badis.
Rgds,
P.Naganjana Reddy -
Creation of New T Code for Material Master
HI,
I have to create a new T Code for Material Master Change i.e. for MM02, with writing restrictions to few fields. How to achieve this?
Thanks and Regards,
Hari Prasad.Hi Hariprasad,
If restricting certain fields using field selection option is not suitable for you, you can go ahead with the option Screen Variend
Also refer the link
[https://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation] -
Issue in LSMW for material master using standard input program RMDATIND!!
Hello guys,
I have a issue in LSMW for material master.
I have a custom field in MARA table. which I want to add in my LSMW.
I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
Is there anything else I need to do apart from addition of field in the structure BMMH1.
Thanks in advance for your help.
Regards,
Sumeet....see oss note 44410, it gives you a step by step overview.
https://service.sap.com/sap/support/notes/44410 -
SRM and MDM for material master in SRM contracts for multiple R/3
Dear all,
my question is:
We are implementing SRM 4.0 in classic scenario with multiple R/3 back-end and we want to set-up Global Outline Agreements in SRM in a multi-backend environment where the Material Master are not harmonized.
We heard that MDM and COntent Integraton can be a solution.
Then detailled question is:
Can we have 2 material numbers (e.g. ABC and XYZ) in 2 different R/3 systems refering the same product.
Have the mapping done in MDM (Content Integrator?) to a third material number:123
Replicating the material master 123 to SRM from MDM(?)
Create global Outline Agreements in SRM for Material Master 123.
Distribute the GOA as Outline Agreement to R/3 system 1 with the translation to ABC and to R/3 system 2 with the translation XYZ, all of that during the distribution step (or another).
Have the call-offs quantities correct on 123 in SRM and BW?
IF yes, how is it working, do you have some documentation discribing the scenario and the config steps to do?
Thanks in avanceHello RD,
That's a good question.
You are on the right way. MDM is the tool for you.
But..
Content Integrator (CI) was first developped for Shell, to address the need of cross-referencing of material/supplier/category IDs, for:
- reporting purpose (actual Spend Analysis)
- mapping purpose (send of XML PO)
CI was later "fusionned" into the new MDM (1.0) solution.
So now, you can not order CI without MDM (even if some SRM slides still present CI).
But mapping API where developped for all inboud/outbound interfaces in SRM, for materials only (good luck for you).
You will find everywhere this piece of code:
Call ECI
CALL FUNCTION 'BBP_PRODUCT_MAP'
TABLES
it_input = lt_mapping_in
et_output = lt_mapping_out
EXCEPTIONS
logsys_not_found = 1
driver_not_found = 2
product_not_found = 3
internal_error = 4
OTHERS = 5.
So it is ok, you have the mapping call, but I don't know if all the rest of the process was really "finalized" (call of API mapping in CI, via XI). I personnaly never used it, but I assume it should work.
I my opinion your process is supported by SAP:
- Extract materials from both R/3 and consolidate them as a single product in MDM.
- Distribute this product into SRM.
- Maintain contracts on those products.
- Distribute them to R/3 (The ECI call is also used during contract distribution).
- Call offs corrects in SRM and BW
For MDM documentation, look at netweaver area of service.sap.com.
For MDM/SRM integration, look at SRM 4.0 spend analysis:
https://websmp206.sap-ag.de/~sapdownload/011000358700004424262004E/GlobalSpendOverview.ppt
For SRM contract distribution, call-offs, BW, look at SRM in details in service.sap.com/srm/SRM4.0:
https://websmp206.sap-ag.de/~sapdownload/011000358700001966382004E/contracten.ppt
For SRM5.0, see online help on help.sap.com.
Rgds
Christophe
Maybe you are looking for
-
Hard drive issues related to a recent install of iLife 2005
SOS! I have a G3 iBook (18G internal memory) that I use with a LaCie 250GB FireWire external drive. Since I have so many Gigs of music, pics, etc. I've removed all my personal files off the startup disk and have them stored on the external drive leav
-
MM: PO Not Picking up PR Having Multiple Line Items
Hi All, When Creating PO with Reference to PR Having multiple line items, not picking up the line items and also the vendor and also the where in we have to select input tax code. CASE1: Created PR 760001340 with single line item and also could abl
-
I have transferred my itunes from pc to new mac book pro. In the syncing of ipod have lost playlists. Is there a way of getting them of old pc library into itunes on mac. Seems to only allow me to do it song by song?
-
For a new contact in ios 7.1 where is the text keyboard to enter the name
I just downloaded iOS 7.1 on my iPhone 4s. When I try to enter a new contact in iOS 7.1 I tap on + then on name but no text keyboard springs up to write the name. Where do I find the keyboard ????? Thanks in advance fro some help. I'm new at this.
-
After the update of the Android on my Tablet to the 4.3 Version keyboard changes and the option to have as many languages as I want disappered! I need 4 languages, but only 3 available! How can I get back to the previous version, because the basic on