Mass update via XK99

Hello dear all,
I want to update the field "INTAD" (email adress in vendor master record) for several vendor in only one company code.
I executed XK99, and i fulfilled vendor and company code selection under " data records to be changed " Tab.
Then, i clicked on Shift + F1 (enter new field value), entered the adress email, then F8.
After that, i added the column Clrk's internet add (INTAD) and clicked on apply changes. Then Save
But nothing happened despite the fact that i have green message saying that changes have been made.
What can be my error ?
Thanks

Hi,
Internet Address field is not available for XK99.
The basic logic lies behind it is that the internet address is generally unique for each vendor and XK99 will not save much efforts in the maintainance.
You need to define an LSMW for updating the internet address in vendor master.
Regards,
Gaurav

Similar Messages

  • Vendor Email update via LSMW

    Hi Folks,
    Have a query regarding mass update for Vendor master email address.
    LSMW does not seem to work for
    a.) Batch Input recording
    b.) Standard batch/Direct input.
    Since Vendor email is not stored in LFA1 (rather in ADR6)
    Also, the email id is maintained in ADR6, XK99/MASS do not work. Hence this option too is ruled out.
    Any suggestions?
    Regards.

    Hello,
    Any thoughts for mass update of Vendor master for email id?
    Regards,

  • Mass update of email in the vendor master record

    Hello to you all,
    Does anyone know how can I run mass update of email in the vendor master record for a big No. of entities?
    XK99 won't help since you can't find the email,
    Batch input recording won't help as well since the email can't be found.
    I will appreciate your help,
    Amir

    Hello Amir,
    You can use LSMW for update operation. You should create a batch input recording for transaction FK02. But you must tick "Use central address management" checkbox on FK02 screen while recording batch input. After that you will see E-mail field on screen.
    Regards,
    Burak

  • Mass updates for Notification/Workorder status

    Is there any way for Mass update of 'status' because orders and notifications need to be un-teco before updating planner groups and work centers? we are using Mass update for IW58,IW38 & IW29 and there is no option for STATUS update.

    Thanks everyone for there response. I'll check the possiblity to add a button in IW28 for the closed notificaitons via any of the below BADIs:
    BADI_EAM_RIQMEL20_FCODE_CUS1 : Implement Customer Function Code in Notification List
    BADI_EAM_RIQMEL20_FCODE_SAP1 : Implement SAP Function Code in Notification List
    and for Work Order:
    BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
    BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
    In IW28 & IW58 there is option u201CPut in Processu201D in Notification Menu, but when I used this option  it says u201CNotification is completed -> can only be displayedu201D. I wonder why this option is not working if Notification is completed.

  • Mass update BSEG-XREF1

    Hi,
    Can anyone suggest FM or BAPI to mass update in BSEG-XREF1, BSEG-XREF2 and BSEG-XREF3 besides using BDC and FM FI_ITEMS_MASS_CHANG?
    I tried to avoid using tcode FB02 and that is the reason i don't want to use BDC and FM FI_ITEMS_MASS_CHANG.
    Thanks.
    Juli.

    I guess only BDC via transaction FB02 is the only way..

  • CO-PA Mass Update

    Hi,
       I was asked to do a mass update on the Customer fields in CO-PA relating to FI postings on a specific revenue account, 723135.
      Your assistance is very much appreciated.
    Many thanks,
    Rosemarie

    Hi!
    As I understand you have to update some customer fields related to CO-PA in FI-documents.
    So, suggestion is:
    - form batch input session for document change transactions CALLs
    - schedule background job for batch input session execution
    As a result you get:
    - changes will be similar to online changes with all corresponding change documents, special ledgers update and so on
    - automatic batch input session log
    - uninterrupting due to timeout update execution without serious influence on overall system performance
    So your program should contain steps:
    - target documents and attributes selection
    - call to BDC_OPEN_GROUP to initialize batch input session (bis_name)
    - loop over target documents and form BDCDATA table for FM BDC_INSERT with TCODE = 'FB02' or TCODE = 'FB09'
    - call to BDC_CLOSE_GROUP
    - call to JOB_OPEN to initialize background job (job_name, job_count)
    - SUBMIT rsbdcsub
    WITH mappe = bis_name
    WITH z_verarb = 'X'
    WITH fehler   = 'X'
    USER sy-uname
    VIA JOB job_name
    NUMBER job_count AND RETURN.
    - call to JOB_CLOSE
    And welcome here on SDN!
    Regards,
    Maxim.

  • Transaction for Mass Update

    Hi,
    Can anyone List out some Standard SAP transactions that are doing mass update.
    Means Transactions which are updating a range of records in single shot. Instead of doing it one by one.
    I need to create a Mass update for Material. What MM02 do for a single material, I need to do for a range of materials.
    I know some Transactions like XD99, MM17 and MASS. But I need some more names from you.
    Points will be rewarded .
    Regards,
    Paliwal

    hi,
    check these.
    CO44  Mass processing of orders
    F.80  Mass Reversal of Documents
    FOFO  Mass release
    FOVX  Mass Processing of Offers
    IMAM  Mass maintenance of approp.requests
    KE55  Mass Maintenance PrCtr Master Data
    SU10  User Mass Maintenance
    XD99  Customer master mass maintenance
    XK99  Mass maintenance, vendor master.
    <removed by moderator>
    Edited by: Mike Pokraka on Aug 4, 2008 11:26 AM

  • My ipod touch will no longer download new apps after i updated via apple store.How can i get the updates deleted or correct the problem moving forward?

    My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?

    Basics from the manual are restart, reset, restore.
    Try those

  • Efi update via usb flash drive?

    I would like to know if there is a way to perform an efi update via a usb flash drive?

    tried the latest 2010 build, got the same problem: 'missing operating system' and again in ubuntu the flash drive is an unknown filesystem.
    tried again on a different computer and got the same error.. how frustrating!
    edit: just to clarify i used the following command 'sudo dd if=path/to/image.img of=/path/to/device' i also changed directory to where the image file is and tried again without absolute referencing the path for 'if=' both of which returned that the command had been completed successfully in terminal.
    edit: tried using again with a different USB stick (Maxell 4GB), again terminal returned 'x amount of files successfully copied to sdc1'.
    .. something different happened this time, i didn't get the same error as before, instead the text 'grub' appears with a blinking cursor. nothing else.
    Last edited by muckymouse (2010-05-07 23:54:10)

  • Mass Update Column In Tabular Form

    Hi,
    I'm trying to create a tabular form that has a mass update column function. i.e. the tabular form will be displayed as normal but at the top of certain columns will be a text box or lov and what ever is entered into those boxes will be cascaded into the empty values in that column without refreshing the page.
    Hope that makes sense.
    I've search the forum but cant find reference, is this possible.
    Thanks Andy

    Hi,
    Just wondering if anyone had any thoughts on this.
    I can get the text to populate another cell e.g.
    http://mlw-mis-2/dev/apex/f?p=174:4
    But how can i get it to reference a column, this is what I'm using to reference another item
    onKeyUp="f_getTextUpper('P4_COL1','P4_TEXT')"
    and I've tried changing the P4_TEXT to other things like
    apex_application.g_f03 (vRow)
    apex_application.g_f03 (i)
    apex_application.g_f03
    But with no luck

  • I got my iphone4 updated via wifi and its shows downloaded and when i install it, it shows verifying software and then says error occured while installing ???

    hi, there, i got my iphone4 updated via wifi n its downloaded, its shows when i check the software update n when i install it, it shows verifying the software n after a couple of seconds comes back with "error while installing ios6" failed so many attempts and even tried to reset the phone, but no use, then i tried latest updated itunes too, can u believe it, it took ages to download n when it was 880mb of the 899mb file, error occured , so many failed attempts, can some one tell me what to do ? are there any issues with iphone4 updates? m scared to update it now, but really wanna get it on my phone.

    I have experienced a similar error with the iPhone 4S.  The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening.  Suffice it to say I am not amused.  Apple needs to work this out - I had trouble updating to 8.0.2 as well.

  • Field BSEG-MANST. does not exist in the screen SAPMF05L 0301 in mass update

    Hi,
    I am trying to perform a mass update of dunning data (level and date) on some open items. Using the mass change function through FBL5N, I receive the error message, and the update is not performed. I cheched with the layout editor, but the fields appears in the mentioned screen. The field is also allowed for modification in customizing, for the company code. I was not able to find the dunning fields in the field status editor, in customizing.
    Any hint?
    Thanks
    Massimo

    thanks, but it doesn't apply.
    More relevant is note 322163 Line items: mass change 'Payment Method' BSEG-ZLSCH, but this refer to a program error, our release is more recent, and, furthermore, the dunning fields aren't available for change in FB02.
    Regards, Massimo

  • Mass update of a custom field at Product Revenue level

    We are trying to update a custom field at Product Revenue level using the Opportunity Web Service. The webservice call is timing out as we have thousands of Opportunities.
    I would appreciate if anybody gives input on how we can massively update a custom field using Opportunity Web Service.
    OR
    Is there a way to mass update a custom field at Product Revenue level other than using a web service.
    Thanks for your help!
    -purna

    If you are not very much obsessed with Webservices, the other workaround is the Data Loader Tool. It was discussed earlier in this forum.
    Pl refer-
    Re: Product Revebue Updation
    Hope this helps.
    Rgds,
    Amit Sahu

  • Is there a way to mass update or replace the SPM Firefighter IDs table?

    We are upgrading from GRC 5.2 to 5.3.  In 5.3 FF/SPM has added an Owners field to the FF ID table (/virsa/zffusers), which is apparently a required field because I keep getting a "Invalid Firefighter ID Owner" error when I try to look at the table.
    Is there a way to mass update, or perhaps import/replace, this table?  I am having problems trying to update this table thru the FF table screen.  When I go to save my changes, it will return the above error because not all of the FFID records have an assignment in this new Owners field.  We have over 160 FFIDs, so I can't change all of the records at the same time.  I can only get about 20 per screen and it will return that error again when I try to page forward.
    Thanks.

    Hi Bob,
    that is perfectly possible - did it a few times already.
    Export the table from within Firefighter, download the owners table (sorry, need to look up the name tomorrow - but you can't miss it), then add the owners through an Excel vlookup. Then re-import the table in Firefighter, and you're ste.
    I'm at home right now - if you have difficulties getting this done shoot me a message tomorrow and I'll send you more details.
    Frank.

  • 1st gen iPod Touch with iOS 3.1.3 - update via wi-fi?

    That's basically it.  I found my old 1st gen iPod Touch and wanted to update the iOS, but I am away from my computer with iTunes. 
    I do have wi-fi though.
    I tried via Settings->General->Update.  But it doesn't have an update option in settings.
    Anyone? 

    A 1G iPod Touch can not be updated past iOS 3.1.3.  Only the 3G and 4G iPod touch models can run iOS 5 or later, which added in the ability to update via the Settings app.
    B-rock

Maybe you are looking for

  • Creation of new iViews not possible because templates missing

    Hello, I do troubleshooting to this problem but still didn't found a solution. Before this problem came up an creation of iViews were possible. I'm not able to reproduce what was changed since then. I'm using an NW04s Portal SP09: If I try to create

  • HT4718 Ilife not in 'purchased' apps after recovery. How can I get it without buying it?

    I recently formatted my mac and recovered it using the provided disk. I went to use Iphoto (which I had previously - I think the store installed it for me?) and it wasn't there so I read the discussions and this post and checked the app store, but th

  • How to use my mac

    Where on the apple site are videos for getting around the computer and learning more than the basics. The other day a found myself learning how to enlarge the screen (hold control and 2 finger scroll) and how to create alias files instead of copying

  • Safari works only in safe mode

    MacBook Air 2010 When I update my OS X Lion to 10.7.3  Safari instantly stop working. When I open Safari it don't download any sites, just white screen and a colored round. In the same time WebProcess eat all my processor power. If I fully close safa

  • Why can't I redeem a gift app?

    Received email from Apple because my boyfriend gifted me Robot Unicorn Attack. I clicked the redeem button and Apple.com sight pops up saying I need to download Itunes 10.6, I did that and it keeps popping up with the same message. How do I accept my