Mass update of email in the vendor master record
Hello to you all,
Does anyone know how can I run mass update of email in the vendor master record for a big No. of entities?
XK99 won't help since you can't find the email,
Batch input recording won't help as well since the email can't be found.
I will appreciate your help,
Amir
Hello Amir,
You can use LSMW for update operation. You should create a batch input recording for transaction FK02. But you must tick "Use central address management" checkbox on FK02 screen while recording batch input. After that you will see E-mail field on screen.
Regards,
Burak
Similar Messages
-
New to ABAP -- Need help with any BAPI to update the vendor master record
I have a requirement to update the vendor master record ( ie purchasing block data inlfa1 and lfm1 table )directly. i have created the report but my problem is i am updating tables directly by using modify which is not correct according to SAP hence i want to use bapi whereby i can change the fields of the table. does anyone know any bapi which can modify the lfa1-sprem field and lfm1-sperm field. Plz hep me. They have specifically asked me to do it using BAPI's.
MAP2e_lfa1_to_bapivendor_04
MAP2e_lfa1_to_bapivendor_05
will be helpful -
Unable to replicate the Vendor Master Records
Hi I am using the transaction BBPGETVD to transfer the Vendor Master Records from R/3 ro SRM...but could not able to transfer it as I am getting an error "Organizational unit -
does not exist; check entries", even through I have created Organisation Structure for Vendor also. I have maintained all the relavent parameters in the Attributes.
The following attributes I have maintained: System Alias for Accounting Systems, Company Code, Local Currency, Current ITS for an External Partner, Accounting System for Vendor, System Alias for Vendor.
Can any one tell me is there any other parameters to be maintained or where I am going wrong.
I am working on SRM5.0.
Thanks and Regards
PKMHi
Please go through these links.
Re: vendor not intended for a puchasing org
Re: Vendor replication
Re: Not able to replicate Vendor from R/3
Re: What are the steps to me followed to get the vendors from R/3 to SUS
Re: Vendor replication Error. SAP R/3 to EBP system
Re: vendor replication
Re: Vendor replication
Replication of verdor records
Regards
- Atul -
Multiple active emails on the Vendor master
We would like to use multiple emails for a vendors .
One to send PO's and Second to send payment advice to the Vendors .
Could you please suggest options to maintain two active emails addresses ?
Thank you in advanceHi,
If you have maintained the payment term in the Purchase Order, it will overwrite the payment term which is maintained in the Vendor Master. If no payment term is maintained in the PO, then the payment term which is maintained in the Vendor Master will be considered.
Regards,
Amit -
Field LFM1-BLIND (Doc index active) in the vendor master record
Hello -
I am going through OSS note # 1819416 which describes about automatic price updates. I am not getting any field LFM1-BLIND for setting this check box in XK02 ( step # 3), even I checked for field status and relevant field is not there.
How to activate vendor for that check box? is there any dependent setting for this?
Let me know if anyone knows about it. Thanks in advance.Hi,
The field is available in ECC (even without Retail), in vendor master - purchasing view as shown below:
You may check in OMSG transaction, whether the field is made optional for the account group as shown below:
Regards,
AKPT -
Mass update of huge list of Material master records
Hi dudes,
I want to update 1 field for the huge list of material master record, i.e., statistics field in sales org 2 tab.
please help
regards,
madhavSAP has designed its system to use the standard transaction way to update any fields, no direct table update should be made.
I have seen so many direct table updates in my career, and what do you think why I have get knowledge about that?
Because it was done incorrectly.
There are that many dependcies in SAP, you never really know them all.
People changed (or deleted entries) in one table, but forgot the update in a second dependend table.
You should be a very experience consultant before you may consider direct table updates, and when you became an experience consultant, then you know that you will not do that. -
DUNS number of our suppliers in the vendor master???
Hi,
We would like to store the DUNS number of our suppliers in the vendor master. It seems that an LFA1 extension is available specifically for storing the DUNS number and other D&B related data. I can not find any info on this. Can some one provide me with some info? We are on ECC6.0.
Thanks,
Chetan ShahDear Chetan Shah,
You can use the Business Add-Ins (BADI) VENDOR_ADD_DATA_CS and BADI VENDOR_ADD_DATA for processing enhancements in the vendor master record.
You use the BADI VENDOR_ADD_DATA_CS to integrate your own subscreens in
the standard dialog. You can process your own data (add-on data) on these subscreens.
Hope this will help.
Regards,
Naveen. -
Where do you store the remit-address on the vendor master
Where do we store the vendor remit-to address in the vendor master record? We're on ECC 6.00.
HI,
I think you are aware of 3 types of vendor creation which is FK01, MK01 and XK01.
XK01 is used for purchasing releted as purchasing data is present.
Use MK01 / FK01 where only company data is present and this vendor created using MK01 / FK01 cannot be used in the PO's, IF we try to do it then the system will show up an error stating that purchasing cannot be done for this vendor.
Thanks & Regards,
Kiran -
Vendor Master record change using CREMAS & ADRMAS
Hi ,
I have one problem with CREMAS & ADRMAS idocs, i am using one custom program(it is using IDOC) to change/ create the vendor master record ,While i try to change some filed of one particular vendor using the idoc,it delete all other fileds related to the vendor like phone no, street mail id ..etc
Can any one help me to slove this problem.
Advance thanx .
With warm regards.
Elango..Hi,
When you are updating vendor information pass the
existing information that is already present for
vendorlike street from lFA1 table and fill other
fields that need to be updated.
IDOC may be replacing the existing fileds values
will space as they are not populated in IDOC.
Regards
Amole -
Create Vendor Master Record from HR Master Record
Hi All,
I am running PRAA Transaction Code, While running I am getting this Error.
Employee for whom a vendor master record already exists.
Personnel Number missing in company code segment.
Then I went to SM35 but did not found any batch.
Please can anyone explain the entire process.
Thanks and Regards
Ravi Narayan Padhi
Edited by: Ravi Narayan Padhi on Jan 11, 2012 11:45 AMHello
In the report RPRAPA00, there is parameter ' 'Create new company code segment for existing vendor master records' as a checkbox under the 'Initial setup' maintenance mode, and it offers you the following option:
If there is a vendor master record already available for a predefined personnel number, but it does not have a company code segment for the company code in which the employee is situated for the key date entered,then program RPRAPA00 supplements the vendor master record with the required company code segment.
In your case, the company code already exist, so it will not create or add a new one with this option.
This only works for "First creation" and not for updating. You need to use "update" or "change" in the setting to do this.
Thanks and Kind Regards
Ramana -
Infotype to link Personnel Number with Vendor Master Record
Hi All,
pls help me what infotype to link Personnel Number with Vendor Master Record in AP module.
Customer require when Create Employee then system automatic gernerate Vendor Master.
pls help us.
ThanksHi,
PRAA works absolutely fine. I have external number range for vendors.
There is an option so that you can create HR accounts in vendor accounts
Path:Accounting> Financial accounting>Travel
management>Personal-Related Master Data> Create Vendors (tr.code PRAA)
Look at this description:
From the HR master data, this program creates a batch input session for
maintaining person-specific vendor master records.
The report can process vendor master records as follows:
o Initial set up (create/add missing company code segment)
o Uupdate (change completely according to vendor and HR reference)
o Change (only according to HR master data, for example, name
Block
The following infotypes from HR master data are taken into account for
the key date specified:
o Actions (Infotype 0000)
o Organizational Assignment (Infotype 0001)
o Personal Data (Infotype 0002)
o Permanent Residence (Infotype 0006 Subtype 1)
o Bank Details (Infotype 0009 Subtype 0 or 2)
All other required data is taken from a reference vendor that you can
specify as a parameter when you start the program. Note that for the
reference vendor, reference data must exist for all company codes that
are applicable according to HR master data. Since program RPRAPA00 cannot
assign vendor master record numbers externally when creating
vendor master records, you must be sure that the reference vendor is
assigned to an account group that requires internal number assignment.
If no house bank is specified in the reference vendor, this is
determined via feature TRVHB (Implementation guide for 'Travel Expenses'
-> Transfer to Data Medium Exchange -> Set up Feature for Determining
House Bank according to the employee's organizational situation.
The link between the HR employee's master record and the corresponding
vendor master record is set up by entering the personnel number in the
company code segment of the vendor master record.
General program flow
Program RPRAPA00 creates a sequential work file in the specified
directory. Ensure that you use a global directory that can be accessed
by all application servers; a directory is automatically proposed. The
work file is later transformed into a batch input session by the
subsequent program RFBIKR00, which is started automatically.
In test run mode this program delivers information messages which
document the creation of a batch input session. Since each information
message must be confirmed manually, the test run should only be
performed for a small number of personnel numbers.
In productive run mode, however, the program RFBIKR00 is automatically
started as a job; the information mentioned above is stored in the job
log in this case.
Initial setup of vendor master records
Corresponding vendor master records are created from the infotypes
listed above and the non-HR-specific information from the reference
vendor. During the process, the personnel number is stored in the
company code segment of the vendor master record. Persons who already
have a vendor master record with corresponding personnel number are
rejected in this run.
If a vendor master record already exists for a personnel number, but
without a company code segment for the company code in which the
employee exists at the key date entered, the program adds the required
company code segment to the vendor master record. You must however
activate the checkbox "Create new company code segment for existing
vendor master records".
The HR master data used is the info type record valid on the key date
entered.
Update of vendor master records
The corresponding vendor master records are updated from the infotypes
listed above and the non-HR-specific information from the reference
vendor. Persons who already have a vendor master record with
corresponding personnel number are rejected in this run. The system uses
HR master data from the infotype records valid for the key date.
Change vendor master records according to HR master data
All HR-specific data is changed in the vendor master records for
personnel numbers that have changes since the date recorded under '...
with last change since'. The system uses HR master data again from the
infotype records valid for the key date specified.
Block vendor master records
All vendor master records which correspond with the selected personnel
numbers are blocked for posting.
User exits
For the following situations, two empty routines are supplied in the
includes RPRAPAEX and RPRAPAEX&H5F001 which you can adapt to your
requirements.
o The employee's last name is entered in the sort field in the vendor
master record. If you do not want this to happen, you can program
the situation you want in the user exit routine
'set&H5Fmc&H5Ffield&H5Fby&H5Fuser'.
o If the address editing in the vendor master record does not suit
your requirements, it can also be changed. For this purpose you have
the user exit routine 'set&H5Faddress&H5Fby&H5Fuser'.
o If you want to assign numbers to the vendor master records to be
created via external number assignment (for example, vendor master
record number &H3D personnel number), you can adjust the user exit
routing 'SET&H5FVENDOR&H5FNO&H5FBY&H5FUSER' (in include RPRAPAEX&H5F00). Note
that
the account group of the reference vendor must also have external
number assignment.
Note that in each case a thorough knowledge of the programming
language
ABAP/4 is necessary.
Set up vendor master records in a separate system
The distribution of personnel master data from a HR system to an FI
system is a prerequisite for creating, changing, and blocking vendor
master records.
In the section Master Data Distribution (link to separate HR unit) of
the ALE IMG, an explanation is given regarding the way in which the
FI
System is supplied with the relevant employee data from the HR System
In the FI System, report RPRAPA00 described here can be used to
create,
change, and block vendor master records.
Other wise try with VPE1 t.code.
Regards
Devi -
Hi,
I am deleting the vendor master records by using xk06 (mark for deletation) but this is individual marking. i would like to delete 500 vendors at a time not one by one
i am also using OBR2 for the same but i am not so clear about that how it is working, this solve my problem but i am not aware of working of this Tcode please suggest me the concept of the same.
Regards,
PankajHi Buddy,
try t-code XK99- Mass maintenance of Vendor Master
1. select the fields tab
2. select the Deletion Flag-LFA1-LOEVM, then execute
3. select the multiple selection, then from here you can either insert a textfile (see green call-outs icon) or paste the Vendor codes directly. execute again
4. select central deletion flag (X)
5. press fill down icon (the column), then save
after this you can validate your changes in XK06
hope this help you.
regards,
Maia
Edited by: Maia on Apr 17, 2008 5:03 PM -
Payment terms in vendor master record
Hello,
How can I make the payment terms mandatory in the vendor master record?
Thanks,
Annabelle R.Hi,
Try following :
SPRO -- Financial Accounting (New)Accounts Receivable and Accounts PayableVendor AccountsMaster DataPreparations for Creating Vendor Master Data--Define Screen Layout per Company Code (Vendors) //Define Screen Layout per Activity (Vendors)
or alternatively use tcodes: obd3, ob23 and ob24
hope this helps
reg
dheeraj -
Changing Vendor Master Record to specify payment method
Hi
May I ask, how can we change the vendor master record to specify payment method. I would like to choose automatic payment processing for my vendor.
I am using T. Code XK-02, but where can we specify the payment method. Please assist.
Thanks
MohitExecute XK02 &
Go to payment transaction screen( tab) in that you have Automati payment transaction segment , under that you find the Payment method fIeld.
here you can goiive the payment method you want.
chandra -
Replication Error with Vendor Master Records
Hello,
We are trying to replicate vendor master records from R/3 to SRM via BBPGETVD. When we go to SLG1, there is an error stating Business Partner XXXX: Invalid Value 0003 for field Authorization Group.
Currently, the AP dept. maintains the field Authorization Group in the Vendor Master Record 'Control' screen with a fixed value of 0003 (LFA1-BEGRU). When the replication occurs, SRM complains that this field value does not exist in a SRM customizing table or is a fixed value.
Do we need to implement the BBP_TRANSDATA_PREP BAdI to pass this value as a fixed value to replicate vendors?
-regards
Shaz KhanI'm planning to implement bbp_transdata_prep. Wondering if either one of you can help. I've also opened another thread with my specific questions.
Replication Error with Vendor Master Records
Maybe you are looking for
-
How do I create a new .DS_Store file for the Desktop?
I have an account, in this case it is the System Administrator account (which I seldom use), where the Desktop icons all scrunch up to the right side of the screen. I can re-arrange them, but when I log out and sign back on, the icons are shifted bac
-
Performance Management Template issue in EHP4
Hi Guru's, I have created a Performance Management template in PHAP_CATALOG and few days before i have delete the template in PHAP_CATALOG. But when i tried to login into portal for any user i am getting this error message " Template 50022735 is not
-
what do i do if i receive this message while trying to instal skype, etc You can't open the application "Skype.app" because it is not supported on this architecture. This also occur while trying to instal some other....
-
Is my ipad wi-fi, gsm or cmda
Hi guys im am having troubles identifying if my ipad (the newest version with wi-fi) is the wi-fi version, the gsm or cdma version. P.s my model number is: A1460
-
Cannot call a second phone on Skype...
I can successfully call ONE phone number via Skype. But when I call a SECOND phone, it answers but cannot communicate either direction (I can't hear them, and they can't hear me). I get an error message (only once the second call is added to the grou