MASS UPLOAD OF NOTIFICATION TASK, ACTIVITY, ITEM

Hi Experts,
I have requirment to upload the notification detials in mass.
Notification details containst(task details, start date and end date, user status, activity details and item overview)
Is there any standarad BAPI is available or not?
Regards,
Vishal Thacker

Hi,
Please refer to these bapis
BAPI_ALM_NOTIF_CREATE
BAPI_ALM_NOTIF_SAVE
BAPI_ALM_NOTIF_GET_DETAIL
Regards,

Similar Messages

Task Shceduler Items

Really I run Windows 7 64-Bit that came with laptop (Home?).
I would like to know if it's ok to disable the following Items in Task Scheduler?
AD RMS Rights Policy Template Management (Manual): "Updates the AD RMS rights policy templates for the user. This job provides a credential
prompt if authentication to the template distribution web service on the server fails."
Uninstall Device Task: "Uninstalls the PnP device associated with the specified Bluetooth service ID"
SystemTask: "Certificate Services Client automatically manages digital identities such as Certificates, Keys and Credentials for the users
and the machine, enabling enrollment, roaming and other services."
UserTask: "Certificate Services Client automatically manages digital identities such as Certificates, Keys and Credentials for the users and
the machine, enabling enrollment, roaming and other services."
Notifications: "Location Activity"
Items in the Media Center folder of Task Scheduler
HotStart: "Launches applications configured for Windows HotStart"
LPRemove: "Launch language cleanup tool"
GatherNetworkInfo: "Network information collector"
RemoteAssistanceTask: "Checks group policy for changes relevant to Remote Assistance"
IPAddressConflict1&2: "This event is triggered when an IP address conflict is detected." This one sounds important.
MsCtfMonitor: "TextServicesFramework monitor task."
SynchronizeTime: "Maintains date and time synchronization on all clients and servers in the network. If this service is stopped, date and
time synchronization will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start."
UPnPHostConfig: "Set UPnPHost service to Auto-Start"
ResolutionHost: "The Windows Diagnostic Infrastructure Resolution host enables interactive resolutions for system problems detected by the
Diagnostic Policy Service. It is triggered when necessary by the Diagnostic Policy Service in the appropriate user session. If the Diagnostic Policy Service is not running, the task will not run"
ValidationTask and ValidationTaskDeadline: "[Windows Activation Technologies]"
BfeOnServiceStartTypeChange: "This task adjusts the start type for firewall-triggered services when the start type of the Base Filtering Engine
(BFE) is disabled."
CacheTask: "Wininet Cache Task"

You probably need to do your own homework by using a search engine to find out what exactly each of these 18 tasks does. This will give you the necessary information to make a rational decision.

Functional location Task lists Header/Operation Mass Upload

Hello experts,
I am using LSMW to upload Functional location Task lists Header & Operations in T-code IA12, for this i am using the Standard program IBIP (Object -> 480).
All required fields are in the standard structures apart from Operation QM Data, Recording view -> ERFSICHT & Inspection point Completion -> QPPKTABS (see attached screen shot).
Should i upload these 2 fields in different way ?
Thank you by advance.
Regards,
Soufiane

Generally, for all kinds of task list (Maintenance, Quality as well as Production), I tend to use BDC programs by which all the fields can be addressed. In standard, there are certain fields which might have got avoided for certain reasons.
So, I suggest you to look for some other options available.

Mass upload of insp type in mm01

Hi, pls advise how to upload 09 insp type and active button in qm view of material master thru mass upload? pls note that presently same materials are already uploaded with 01 insp type, we want to add one more insp type 09. pls advise how to do the same.

In n QA08>select material plant->go to mass upload tab->enter 09 inspection type->check with change material document * execute-->you will get the list of all material with additional screen where you can select the task list ,check char etc.
-->select all the materials & click on save button
check the message after saving all.

Send out repeating notifications until an item is approved?

We've got a calendar with events requiring approval. Let's say there is an event scheduled next wednesday @ 4:00 that needs to be approved.
I'd like to send out a notice email to everybody on the team twice a day, every workday (M-F)during work hours (8:00am-5:00pm) - until the event is approved. It would be great if the email said how many hours left until the event is going to take place.
We've got the workflow approval process in place.
Any idea what to add to that to keep bugging everybody to approve it?

Hi,
According to your post, my understanding is that you wanted to send out repeating notifications until an item is approved.
I’m not very clear about that ‘keep bugging everybody to approve it’. Do you want to complete the workflow once a user approve the task?
By design in SharePoint Designer workflow, the workflow will be completed untill all users approve the tasks.
To assign task to multiple users, you need to:
Create a workflow and add action: Start Approval Process.
Click these user, select the Group, change One or a time(serial) to
All at onec(paralle).
Right click the action, select Properties, click ExpandGroups, change No to
Yes.
Then you can assign task to each member of the group.
To complete the workflow once a user approve the task, you need to:
Click Approval.
Go to change the completion conditions for this task process page.
Deleting the condition and Task Process: Active Task Count equals 0.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Mass Upload doesn't work

Hi everybody,
i am trying to upload user photos via mass upload iview. Therefore i create a folder (c:\photos). In this folder i have two files
a) mapping.properties.txt with the line: Anton=1011
b) 1011.jpg
I use the iView for Massupload from content provided by sap -> collaboration -> demo role -> iviews. I create a task with the following properties:
Task name:           Mappupload
Upload from Folder:           c:\photos
Photo type:           NORMAL
Apply checked conditions:      (no checked)
Use Mapping:           (checked)
After starting the task the photo was not updated and there was nothing in the application log!?
What could be the problem? I can add the file manually but not through mass upload.
Has anybody use a mass upload?
regards,
Seed
Edited by: seed_mopo on Sep 26, 2008 11:04 AM

Hii
Pls Use these threads:
https://www.sdn.sap.com/irj/sdn/thread?messageID=48369#48369
https://forums.sdn.sap.com/click.jspa?searchID=16795891&messageID=4282098
https://forums.sdn.sap.com/thread.jspa?messageID=9087#9087
https://www.sdn.sap.com/irj/sdn/thread?threadID=257887
Thanks:
Hope it would be helpfull

Mass Upload of condition records in APO system.

Hi All,
I wanted to mass upload condition records in to the APO system for the transaction /N/SAPCND/AO11 from an external file.
Is there any FM available?
If FM is not available...which one is the best way to do this?
LSMW?? or BDC???
Please guide me..
Thanks,
Babu Kilari

At least the key fields of the conditiontable
(here 800) must be filled in structure ls_komg.
ls_komg-vbeln = '1234567890'. " document number
ls_komg-posnr = '000010'.      " item number
clear wt_komv.
ls_komv-kappl = 'V '.        " Application V = Sales
ls_komv-kschl = lc_kschl.    " Condition type
ls_komv-waers = 'EUR'.       " Currency
ls_komv-kmein = 'ST'.        " Unit of measurement
ls_komv-kpein = '1'.
ls_komv-krech = 'M'.         " calculation type;
                              "M = Quantity - monthy price
ls_komv-kbetr = '1234.56'.   " new condition value
append ls_komv to lt_komv.
call function 'RV_CONDITION_COPY'
exporting
    application              = 'V'
    condition_table          = '800'      " cond. table
    condition_type           = lc_kschl   " cond. type
    date_from                = '20061101' " valid on
    date_to                  = '20061130' " valid to
    enqueue                  = 'X'        " lock entry
    i_komk                   = ls_komk
    i_komp                   = ls_komp
    key_fields               = ls_komg    " key fields
    maintain_mode            = 'A'        " A= create
                                          " B= change,
                                          " C= display
                                          " D= create
with reference
    no_authority_check       = 'X'
    keep_old_records         = 'X'
    overlap_confirmed        = 'X'
    no_db_update             = space
importing
    e_komk                   = ls_komk
    e_komp                   = ls_komp
    new_record               = lv_new_record
tables
    copy_records             = lt_komv
exceptions

Mass Maintenance of BOMs with Alternate Item Groups

We plan to create BOMs containing Alternate Item Groups (+ usage probability + priority) to cover alternative parts usage.
What is the SAP solution for Mass maintenance of BOMs with Alternate item groups?
Is it possible to use (or customize) CS20 (or another transaction) to do following tasks in Mass :
- identify the BOMs containing a specific material number (where used)
- add a new item line with a new material nbr in the BOM (with same quantity, subitems, Alternate Item Group, ...)
- when required, change the usage probability of the members of the group to set the new material usage on 100% and all other alternates usage on 0%. When not required, add the new one with 0% and don't change the existing members of the group.

Dear.
Ask your ABAP Team to write BDC or LSMW program.
This will help you.
Regards
Utsav

CCM Catalog Mass upload problem

Dear Experts,
Could you please help me to find an answer to the below issue?
We are doing a mass catalog upload in CCM 2.0 => we are uploading our CSV file as follows:
Supplier ID A => Supplier name A => Item details A
Supplier ID B => Supplier name B => Item details B
etc.
Usually, I give the first Supplier ID when creating the Supplier catalog.
The upload process is working fine, BUT...
When the catalog has been uploaded, from the Procurement Catalog side there is only the first "Supplier ID A" what's beeing uploaded to all of the items instead of all the other respective Supplier IDs.
Therefore we have to change the rest of the Supplier IDs by mass changing the respective Proc Cat.
Do you know how we could keep all the other Supplier IDs?
Thanks a lot - imre
Edited by: Imre Matyas on Feb 8, 2010 11:09 AM

Hi,
In that case my solution will help.
Here is sample schema with custom characteristics. Please look at Z_SUPPLIER_ID and Z_SUPPLIER_NAME.
SAP CATALOG CSV 2.0 <;>
Defaults;EN
Model
Catalog;Master;;Master Catalog
Characteristic;Z_ACTION;/CCM/NAME;false;Action
Characteristic;/CCM/PRODUCT_ID;/CCM/ID;false;Part Number
Characteristic;/CCM/SHORT_DESCRIPTION;/CCM/DESCRIPTION;false;Description
Characteristic;Z_MATERIAL_TYPE;/CCM/ID;false;Material Type
Characteristic;/CCM/MINIMUM_QUANTITY;/CCM/MINIMUM_QUANTITY;false;Order Unit
Characteristic;Z_CONTENT;/CCM/MINIMUM_QUANTITY;false;Content
Characteristic;/CCM/LEAD_TIME;/CCM/LEAD_TIME;false;Lead Time
Characteristic;Z_SUPPLIER_ID;/CCM/ID;false;Supplier Number
Characteristic;Z_SUPPLIER_NAME;/CCM/NAME;false;Sup Name
Characteristic;Z_P_GROUP;/CCM/ID;false;Purchasing Group
Characteristic;Z_P_ORG;/CCM/ID;false;Purchasing Org
Characteristic;/CCM/CONTRACT_ID;/CCM/ID;false;Contract Number
Characteristic;/CCM/CONTRACT_ITEM_ID;/CCM/ID;false;Contract Item
Characteristic;/CCM/PRODUCT_GROUP;/CCM/ID;false;Product Category
Characteristic;/CCM/PRICE;/CCM/PRICE;true;Price
Characteristic;Z_DATE;DATE;false;Date
Characteristic;Z_UPDATE_BY;/CCM/ID;false;Updated By
Characteristic;/CCM/LONG_DESCRIPTION;/CCM/LONG_DESCRIPTION;false;Long Description
Characteristic;/CCM/PICTURE;/CCM/ATTACHMENT;false;Picture
Characteristic;Z_BUYER;/CCM/ID;false;Buyer
Characteristic;Z_BUYER_CONTACT;/CCM/ID;false;Buyer Contact Number
Schema;Master;Z_ACTION;Z_MATERIAL_TYPE;Z_CONTENT;Z_SUPPLIER_ID;Z_SUPPLIER_NAME;Z_P_GROUP;Z_P_ORG;Z_DATE;Z_UPDATE_BY;Z_BUYER;Z_BUYER_CONTACT;Master Schema
Regards,
Masa

Regarding LSMW upload for General Tasks

I am trying to upload a task header & item data i.e.PLKO & PLPO.
For that I am using the standard LSMW object 0170 which is called <b>Routing</b>. But at the time of creating Batch Input session i am getting error
No profile with entry tool for task list A 1 in session MPLAN_LOAD.
So can anybody explain what is this all about.
Or is there any convinient way apart from BDC to create General task along with multiple operations.

You can try to load data using the IDOC method
Message type : ROUTING_CREATE
IDOC method works well for many complicated loads.
Regards
Vivek
reward points if this helps

Mass Upload of DIR's through LSMW

Hi All
I have few queries in mass uplaoding of DIRs through LSMW..
1) Status : I have 3 preceding status before the final "Approved" status and the status is locked.. So how to set the final status initally, as we cannot have both "Initial" and locked status together.
2) The file names - what is standard procedure in giving the path of files.. Mentioning the path of File names for each files would be tremendous task.. So is there any easy way?
Regards
Aby

hi,
about your Q1
I am not sure from your project context but you may try this;
we have to prepare statuswise different mass uploading files, same time you have to set the requeired status to intial staus removing all predecessor or successors for time being. Once you done with uploading again set the system to required status network and status types to individual status.
Please let me know if its works for you, I believe this should be done before go live phase.
Thanks
Pramod

Mass upload of user photos in EP

Hi All,
I have to do a mass upload of user photos in EP. I tried it in two ways.
1.     In a network folder say
173.XX.XX.XXUserPhotos, I stored the photos and then I used the Mass photo upload iview, which is available inside collaboration demo role.
2.     I created a new task and given the below parameters,
1.     Task nameà MyPhotUpload
2.     Upload from folder à
173.XX.XX.XXUserPhotos
3.     Photo Typeà NORMAL
I clicked on save and then I run the task. I didnu2019t got any errors, at the same time I didnu2019t got any output also.
Then I tried it this way.
I created a nework path in System Administration à System Configuration à KM à CMà Global Services à Network Path (really sorry if I am being stupid)
Here I specified the network path and the login credential required to access this folder and named this network path as u201CMyNetWrkPathu201D
Now, I came back to mass upload ivew, there I deleted the old task and created a new task with
a.     Task Name à MyPhotoUpload2
b.     Upload from folder à MyNetWrkPath
c.     Photo Typeà NORMAL
I clicked on Save and then I run the task. Again the same result. No errors no success.
PS: I already specified the photo type check and photo size check in System Administration à System Configuration à KM à CMà Global Services àUserPhoto
Somebody please help me.
Regards,
SrinivaS

Hi,
it seems the portal doesn't have permissions to read contents from this physical folder.
Try to import a sample photo with "apply checked conditions" unchecked in mass upload iView.
If that doesn't help then try to increase the trace level to INFO for this app in Visual Administrator and see what is causing
the problems.
The location is com.sap.netweaver.kmc.people.photo.admin .
Eventuallly try to import files from local folder instead of network share.
Hope this helps.
Regards,
Ladislav

BAPI/BADI for mass upload

Hi Everybody,
I want to mass upload all the entries in EK01 and EK02 from an excel file (or any legacy system)rather than manually entering all the details which consumes a lot of time.Althogh we can do it through LSMW but if there could be a a BAPI/BADI/program to do the same. Please suggest me the same.
Regards,
Richa Tyagi
Edited by: Richa Tyagi on Feb 22, 2011 6:43 AM

Its an IMG ( customizing ) activity hence you wont find BAPI / upload programme for the same .
Only tool which i feel for the requirement mentioned is LSMW . As you wont be configuring your system on a frequently basis , its rather a one time activity .
Regards ,
Dewang

FB70 mass upload of invoices

Dear Experts,
We are migrating to a new system and would like to move our open invoices for AR in to the system. I know we can use FB70 for single invoices. Problem is that we have 1800 of them. Is there any way of uploading the mass invoices outside of the LSMW transaction? From reading about LSMW I see that this can take a few weeks to get right.
Is there a standard Mass Upload for FB70 or a report for that matter?
Thanks.

Hi Raki, Hi All,
I believe a properly designed LSMW batch input can do the trick. I had to do the same recently for approximately 800 open customer items - both invoices and credits - and it worked fine. It definitely does not require weeks... For me it took a few hours to make it.
Also refer to this thread:
fb70 using LSMW error No batch input data for screen SAPMF05A 1200
Regards,
Szabolcs

Mass upload attachments?

Hi,
Is it possible in any way for us to mass upload attachments in an Oracle EBS form?
The requirement is to have each finished goods item to have a picture attachment, and we have an awful lot of new finished goods created each month, while attaching picture one at a time is really time consuming.
Thanks,
Gerry

Have to have it coded, after you setup the required attachement categories for the item screen/function.
Api FND_WEBATTCH.ADD_ATTACHMENT for programatically doing this

MASS UPLOAD OF NOTIFICATION TASK, ACTIVITY, ITEM

Similar Messages

Maybe you are looking for