Massive RSS and Network Problems

When I try and refresh my RSS feeds I get an error message that says
*+There was an error updating the RSS feeds.+*
+Mail cannot start a session with the system-wide RSS service. No RSS feeds will be refreshed.+
Also when I click the RSS icon in safari I get an error that says
*+Safari can’t open the page.+*
+Safari can’t open the page “feed://consumerist.com/index.xml” because it could not load any data from this location.+
Everything was fine. I went to my other house and used the wireless DSL network there. All was fine there but when I cam back to my main home I got this error. Safari seems a little slow and wonky also.
I have tried the wireless network and wired ethernet at my current location. I have tried creating a new network location and resetting safari. The weird thing is that I have a laptop and a desktop and the desktop works fine. It is sitting right next to the laptop on the same connection.

From what I understand, the corruption is occurring from RSS subscription in mail. I deleted the RSS subscriptions in mail and just use the reader in Safari.
Move /Users/yourusername/Library/PubSub/Database/Database.sqlite3 to the trash. Reboot. Empty the trash. Go into Safari and when you use your existing RSS or newly added RSS feed the database file will get recreated. My system seems to churn for a minute or so while rebuilding the database and pubsub had high activity in the activity monitor. All was fine after a few minutes and RSS was working again and the Database.sqlite3 was existing again in Users/yourusername/Library/PubSub/Database/Database.sqlite3
As a pre-caution I did make a zip of the original.
Hope that resolves your problem!

Similar Messages

  • Z1 bluetooth and network problem after updating to 1.136

    Hi,
    Last week I updated my phone via PC companion when it notified me a new system update was available. The update took me from Android 4.2.2 to 4.3, and the biuld number is now 14.2.A.1.136.
    I use my phone with a SmartWatch 2 all the time, and a SBH20 bluetooth headset in my car. Before the update everything worked fine, but now I have issues with bluetooth connectivity. My SmartWatch 2 randomly disconnects and reconnects to the phone, and so does the headset. In the watch, specifically the Whatsapp notification app by LIS software stopped getting notifications most of the time, although every once in a while it does. The SBH20 also randomly disconnects and sometimes it takes minutes to reconnect by itself. I already unpaired and paired again both devices, even reset the SmartWatch, and the problem persists.
    But the most recurrent issue is that the phone repeatedly notifies me to "Sign in to network"... and has problems connecting to the 4G and even to wi-fi networks, meaning that sometimes I don't get any data at all for who knows how long, because it happens randomly.
    One thing that seems to me is that every time i lose my bluetooth connections it's because (or at the same time) of whatever happens that triggers the "Sign in to network" notification.
    I was really happy of having purchased the whole package of phone, watch and headset, please help me with this.
    Leonardo

    This is the responses I go from Sony "Customer DON'T Care....." regarding bluetooth issues - 
    "We can advise Sony Xperia do not test our products with other manufacturer’s devices and so we can not confirm the two devices are compatible.
    As the handset has been updated this does indicate it is running different software which means the Bluetooth will have also been updated. Sadly, as Sony Xperia does not test our products with third party Bluetooth devices we will not have been able to foresee the change with your specific device.
    We could only suggest that you contact the manufacturer of the device for any further assistance as there is nothing further we could advise.
    We do apologise for any inconvenience this may have caused.
    It is not that the software does not work it is the fact that we have updated the bluetooth drivers withing the update you have which no longer makes the bluetooth compatable with your car kit, if you ahve not contacted the car manufacturer already then I would suggest contacting them and seeing if there are any updates needed to the car kit."
    Mmmmmm... so it seems that they DO NOT test any O/S upgrades against anything.....
    It seems strange that both Samsung(S3 running 4.3)  and HTC M* (running 4.4.2) both work perfectly with my car audio system and the "developers" at Sony cant... either that or they just do not care... The smart money is on the latter... My z1 is THE WORST PHONE THAT I HAVE EVER HAD THE MISFORTUNE OF OWNING....

  • [SOLVED] linux-grsec on macbook pro 9,2 - battery and network problems

    I have a macbook pro 9,2 on which I am dual booting OS X and arch. I am using xfce as my DE on the arch installation. Since installing and switching over to linux-grsec, my system seems unable to detect the presence of a battery (specifically my arch system - OS X still detects my battery just fine). The xfce battery monitor panel icon sits at 50% and does not change regardless of whether AC power is connected or not. Xfce power manager can detect whether or not the computer is receiving AC power, but does not show the existence of a battery. Running
    # acpi -b
    yields an empty output, as does running
    # dmesg | grep -i battery
    These methods all properly detected my battery prior to the installation of linux-grsec. I was unable to find any similar problems via google or the arch forums, and find myself at a loss for where to look to learn what I need to do to resolve this. I would very much like to avoid returning to the default kernel, if possible. I appreciate any assistance that you can offer, though if given a choice I would prefer the means to figure out the answer over the answer itself.
    Last edited by Olorin (2015-01-10 20:48:07)

    Update:
    Regarding the battery: I have determined that the update I performed had nothing to do with the detection of my battery. Arch detects my battery when AC power is connected during bootup (and continues to detect it even if I remove AC power after bootup), and does not detect my battery if AC power is not connected during bootup (and continues to not detect it even if AC power is connected after bootup). I did not notice before because by coincidence I started using my macbook without the power cord attached at the same time that I installed linux-grsec. Now that the problem is more clear and specific, I am migrating it to its own post found here.
    Regarding bandwidth usage: Conky and Network Manager failing to display bandwidth usage actually occured immediately after switching to linux-grsec, I just did not notice this failure at first. The problem ended up being quite simple. Unbeknownst to me, linux-grsec changed my wireless interface name from wlp2s0 to wlp2s0b1. Network Manager and Conky were therefore failing to display bandwidth usage because they were both using wlp2s0 instead of wlp2s0b1. Correcting the interface name in .conkyrc and the network applet settings fixed the problem.
    Last edited by Olorin (2015-01-11 00:44:42)

  • 10.5.7 and network problems

    Hi everyone,
    I recently installed 10.5.7 on my iMac and Macbook (late 2008). Whenever I use the internet, it hangs up and I get either a gray screen or the page will not load at all. I did not have this problem when I had 10.5.6 installed, it worked perfectly. I checked my modem settings and the firmware on my router and all are up to date. I know it is not the connection, because I have a Windows computer that connects to the internet with no problems, which leaves me to believe 10.5.7 is the culprit. Can anyone give me some advice or explain to me how to resolve this problem? I am finding myself having to use my Dell Notebook which I don't want to. Thanks for your time, Craig

    I'm also having this networking problem, both on a wired and wireless connection. I am almost positive that this stems from the 10.5.7 update and it's incredibly frustrating. I've tried deleting the plist files from the library, adding a new location, assigning a manual IP address and resetting my network hardware, nothing has helped.
    Hopefully Apple will realize this soon, in the meantime I'm going to downgrade to 10.5.6.... what a pain..
    I just hope those PC people don't find out about this!

  • Photoshop cs4 new system integration and network problems

    Hi there!
    I am new to the forums, but I will just dive right into my issue rather than introducing myself:
    I recently did a new hardware install (16 TB of clustered storage) at a mograph studio that are heavy users of Photoshop CS4, amongst other things.  Prior to the new storage, they primarily used an Xserve with attached RAID device, and CS3.  They are now experience high amounts of file corruption on PSDs from saving over the network.  I am, of course, aware the Adobe does not support network saving, due to the plethora of problems that may exist and the difficulty of recreating such varied environments.  I also know that neither Apple nor Adobe seem overtly concerned with this problem, although they may have fixed it with updates in CS3.  The users are aware of this fact, but continue to stress that they had "no problems what so ever on the xserve".
    Basically, aside from the facts that are available in http://kb2.adobe.com/cps/406/kb406793.html and found on the forums, has ANYONE found an exceptable work around for these sort of issues.  Also, we tried the "save as" fix that was posted on these forums, and that did not work either.
    Please, any help is extremely appreciated.  Thanks

    If you have a working network and servers -- it can work. (and does for most of the servers inside Adobe, and those in my home)
    But if anything (OS, network, server) malfunctions -- the process breaks in difficult to diagnose ways.
    Photoshop is already following all the safe file save guidelines, testing for permissions, testing for space availability, etc.  But still things fail on networks.  And when we look into the failures, it's rarely the same cause and usually can't be worked around in any reasonable manner.
    As application developers, we're frustrated too.  We know it can work.  We know it should work.  But some things are too far beyond our control.
    Bottom line:  Finder and Explorer add a lot more error checking to server file copies, and do their copies in relatively simple patterns (unlike file saves that can involve random seeks and writes, depending on the format).  Saving locally and copying to the server afterward is going to be safer (adds at least 2 more layers of error checking).  The same goes for copying from the server then opening -- though we see far fewer errors reading from a server than writing to a server.

  • Airport and network problems after recent update

    I want to know if someone is aware of what went wrong with the latest OS updates, all my computers forget my local wireless connection and sometimes I'm connected to my co-workers unprotected red. Airport just won't do its job.
    This issue is really frustrating since several applications like Flash for example give you and error when saving a file after reconnecting to your network after a network loss.
    If someone knows how to work this around to stop this annoying behavior please advise, I'm sure I am not the only one experiencing this.
    Regards

    Dear Eyewake,
    I have had the same problem recently, after QuickTime 7.1.1 upgrade. The only way I can now get wireless access is to leave the network unprotected at factory settings. At least one other person posting to this discussion list has this problem in the last week, but no replies.
    Do you know where else we can try to get help?

  • Lenovo S90u "Security problem" and network problems

    I recently unistalled the security application (lenovo safecenter?) from my lenovo s90u phone. After this every time i turn on the phone there is an annoying message "Security problem" at the bottom left corner and the android "robot" at the top left corner of the screen, Reset to factory didn't solved the problem as also and a lenovo safecenter apk which i downloaded from a link i found here at the "Lenovo S850 security problem" topic. Also there is a serious problem with network connections as wifi and/or data connection are turning on at spear times without my permission. Every time i turn the phone on data connection in on and although i turn it off it turns on again (or the wifi) at spear times.Can you suggest any solution?
    ‎08-09-2014 03:06 AM

    I recently unistalled the security application (lenovo safecenter?) from my lenovo s90u phone. After this every time i turn on the phone there is an annoying message "Security problem" at the bottom left corner and the android "robot" at the top left corner of the screen, Reset to factory didn't solved the problem as also and a lenovo safecenter apk which i downloaded from a link i found here at the "Lenovo S850 security problem" topic. Also there is a serious problem with network connections as wifi and/or data connection are turning on at spear times without my permission. Every time i turn the phone on data connection in on and although i turn it off it turns on again (or the wifi) at spear times.Can you suggest any solution?
    ‎08-09-2014 03:06 AM

  • Safari and Network problem

    I have an MBP and a iMac 24" both Intel core 2 duo computers connected wirelessly to a BT home hub etc. I also have a MBP 2.16g Intel Duo.
    The core 2 duo MBP and Imac both have network and browser issues where the older MBP is ok.
    The network drops out and I have to reset them to re connect.
    Safari and Firefox wont allow me to login to some web sites with user names and passwords like ebay where as the old MBP will login with no problems
    Any ideas, all are up to date and checked for viruses etc

    The probable culprits could be:
    1. Preference files are damaged
    2. Cache file corruption
    3. Incompatible Contextual Menu Items
    4. Incompatible Input Managers
    5. Incompatible Internet Plug-ins
    6. Bad Startup Items
    7. Incompatible Preference Panes
    These for starters. They would be items in the /Home/ or /Home/Library/ folder. I would suggest you start by installing AppleJack - VersionTracker or MacUpdate - then following the instructions to boot into single-user mode and run the AppleJack routines - use the automatic mode.
    For Safari I would try clearing its history and other caches.

  • EPrint and Network Problems Photosmart All-In-One D110 Series

    Hello,
    Any help would be extremely appreciated as I have spent several days trying to figure this out with not much prevail!  My product installation said installed properly.  Blue wireless light is on in front of printer.  Shows onine and ready in printers and devices on control panel.  For quite a few days I could get it to print from PC but not take advantage of wireless features.  I could not set up web services as it gave me an error saying "no connection".  FINALLY!!!... by setting up a manual I.P. in network settings for the printer I was able to set up web services.  I installed iPrint on my Android and that works wonderful.  However, I cannot print from email.  When I open ePrint it still shows offline.  When I open my network map it shows my printer at the bottom of the page and says "The following discovered device can not be placed in the map."  I have run all the diagnostics and all come out successful.  The network diagnostic kept saying my McAfee was blocking the printer.  I've read and read and reread the directions on how to solve this.  Thought I've allowed all HP permissions and ports and still McAfee blocks my printer.  When I disable McAfee network diagnostic completes successful.  However, with McAfee disabled, I still have the other troubles.  And now the diagnostic for network will not even open it shuts down with an error unable to finish program.  I am running Windows 7.  I have the wireless printer installed with no USB.  I have a DSL cable and a Linksys router.  If someone can please help me.  I bought this thing along with new computer 2nd week in Feb. and have not been able to get it working properly and am ready to tell HP to take it away!!  I haven't even been able to enjoy my new computer with all this installing - reinstalling - reading forums - talking with tech support.  THANK YOU!!!!

    Is your windows up to date (do WIndows Update over and over until there are no more) and your McAfee up to date?  This seems like a Windows or HP software thing to me.
    I assume uninstalling and reinstalling does not do the trick?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Lenovo A800 Wireless and Network Problem

    Hi,
    I bought Lenovo a800 few months ago, t'was working fine until 2 days ago, I can't seem to connect to Wifi and Bluetooth
    Every time I turn on these 2 options it will just say
    Turning Bluetooth on...
    then will be back to To see devices, turn Bluetooth on.
    and for Wlan/Wifi
    it will say Turning WLAN on
    then nothing will happen, the white indicatore for WLAN will just blink and even if it is not turned on it doesnt close or it cant be removed.
    Here is the picture

    I have exactly the same problem. Have you fixed it already?

  • Administrator and Networking problems

    We have several computers in the house, and the music library is stored on an external hard drive connected to the network.
    In the network we can navigate simply to the hard drive and click on a song and itunes will play it.
    Now when i click
    file
    add folder to library
    (brings up directory tree)
    i select network, and double click, or expand and nothing happens.
    But if i click explore it opens in a new window and i canselect the network location and the folder.
    Also if i try to change the itunes music location to the network location, it wont let me change it at all.
    A copy of the daignostic is set out below.
    Now i am the administrator, im logged on as administrator, and even started itunes as administrator.
    Yet the diagnostic says im not the administrator.
    Microsoft Windows Vista Professional (Build 6000)
    INTEL_ D975XBX2
    iTunes 7.4.3.1
    Current user is not an administrator.
    Network Adapter Information
    Adapter Name: {47EAB8BE-C8F7-449F-8D49-77D5B2EDC7A7}
    Description: Intel(R) PRO/1000 PL Network Connection
    IP Address: xxx.xxx.xxx.xx (ive xxx the ip address out)
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.254.254
    DHCP Enabled: Yes
    DHCP Server: 192.168.254.254
    Lease Obtained: Sat Oct 06 12:23:49 2007
    Lease Expires: Sat Feb 02 04:15:31 1974
    DNS Servers: 192.168.254.254
    Network Connection Information
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off. (Note using one care - and yes itunes and about 5 versions of it is authorized)
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.

    Bump. Still hoping for help on this one.

  • Sim and network problem nokia x2-05

    Recently, i noticed that when ever i insert my sim card and start up my phone, it shows ''no sim card inserted. startup device without sim?" even when there is a sim. Another thing is that when it finally accepts the sim, it shows sim registration failed or my network will just disappear. can someone help me?

    After working for about a year troubleshooting mobile phones, usually Solution 1 and 3 are the most helpful - not necessarily an upgrade to the firmware, but at least a re-install of it. 
    Moderator's Note: External link was removed. 

  • Pavilion Dv7 7023cl: Battery and networking problems.

    Hello. My Pavilion Dv7 7023cl has been going downhill for the past few months, but I've been planning on purchasing a new hard drive for it, since my current one is failing. However, I'll get to the point.  For some reason, and some how, the battery is locked into place, with the slider pushed all the way right. There is an orange picture of a square with an arrow to the extreme left. I need help fixing this since I need to clean the fan vents, as the computer is reaching 82 degrees Celsius... The second issue is that the internet key is showing an orange light. I've tried resetting the BIOS settings, rebooting, and pressing every single key on my keyboard. Still no luck.  The third is that it's overheating often, regardless of if the vents are clean or not. It may possibly be the fan, but...  Unfortunately, the computer is not under warranty anymore.  Here are the specifications:The processor is an AMD A8-4500M APU with Radeon HD graphics. It claims to be 1.9 Ghz, but it always run at 3.0. It's not overclocked.I have 8GBs of R.A.M. with only 2GBs left. Don't ask me how.It scores a 5.9 on the Windows Performance Index, based on the 5.9 rating of my Disk Data Transfer Rate.4 cores, 4 logical processors. 

    DV 9000 series has same problem. Apparently so do most of their Laptops. My wife and kids have all been burned by haveing the system on their laps. I only use at a table and had to build a special base to raise the system off the table
    to allow all vents to be clear 2  inches.
    I had them send me restore disks for other reasons. Now my bios says "Not Vista".
    If I was you, I would cut my loses and move to an other manufacturer. get the extended warrenty and keep it up to date
    Hp is no longer even on my list of possible product purchases. Their products and if you want that, support service, suck.

  • Massive Sync and Restore Problem

    When I went to sync my 5G iPod Video (version 1.2.1) to my iTunes (7.3.2.6 WinXP), it gave me the following error message "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." My iPod was never placed in recovery mode to begin with. I restored my iPod as requested, and I recieved the exact error mesge again. And I repeated this process once more, referred to the Support page, and nothing else seems to work. Now, my iPod has no media and will not sync. I have scanned all files for corruption, and none detected.
    To let you know about my computer, I've been modifying the overall appearance to become Mac OS X Tiger. I wouldn't think this would effect this too much, since I haven't touched a single app.
    HELP!!!!!!!

    You are caught in a restore loop. With the exception of your iPod (connected to a rear port), mouse and keyboard, disconnect from any network you are a part of and disconnect all other USB devices including external hard drives, thumb drives, modems, printers, scanners, etc. and change the drive letter of the iPod to something much higher, like M or P or Z:
    http://docs.info.apple.com/article.html?artnum=93499

  • Battery & network problems after upgrade to ios 5.1.1

    The day I upgraded my iPhone 3g to iOS 5.1.1 It started to given me Battery and Network problem.
    Battery Problem Details :
    1. Battery life last for only 2 to 3hrs after being full charged (i.e. to 100%)
    2. If i use the phone example try to use a App or browse a website in 1 min the battery life drops down by 20 to 30 %
    Network Problem Details :
    1. I keep lossing network connection
    2. I have to go to setting and choose it manually each time. Keeping it on Auto doesn't work
    Note when my phone was on iOS 5.0.1 it use to work without any of these issue
    Please Help

    My network problem has been resolved after i did a Reset (all Setting) but the battery life is still a problem.
    I have read on other post that 5.1.1 has caused many user battery life issue. I have tried the resolution that people are saying resolved their issue i.e. to drain the battery and then charge it to 100% leaving in on Charge for more 1.5 hrs but this too did n't work for me.
    I did a Restore and Reset and other trouble shooting step but none has help till now.
    Hope Apple is listening.

Maybe you are looking for